S掺杂对锐钛矿相TiO2电子结构与光催化性能的影响

采用基于第一性原理的平面波超软赝势方法研究了掺杂不同价态S的锐钛矿相TiO₂的晶体结构、杂质形成能、电子结构及光学性质.计算结果表明硫在掺杂体系中的存在形态与实验中的制备条件有关;掺杂后晶格发生畸变、原子间的键长及原子的电荷量也发生了变化,导致晶体中的八面体偶极矩增大; S 3p态与O 2p态、Ti 3d态杂化而使导带位置下移、价带位置上移及价带宽化,从而导致TiO₂的禁带宽度变窄、光吸收曲线红移到可见光区.这些结果很好地解释了S掺杂锐钛矿相TiO₂在可见光下具有优良的光催化性能的内在原因.根据计算结果分析比较了硫以不同离子价态掺杂对锐钛矿相TiO₂电子结构和光催化性能影响的差别. 关键词： 2')" href="#">锐钛矿相TiO₂ S掺杂 第一性原理 光催化性能     

First-principles study of electronic structures and optical properties of Cu, Ag, and Au-doped anatase TiO2

We perform first-principles calculations to investigate the band structure, density of states, optical absorption, and the imaginary part of dielectric function of Cu, Ag, and Au-doped anatase TiO₂ in 72 atoms systems. The electronic structure results show that the Cu incorporation can lead to the enhancement of d states near the uppermost of valence band, while the Ag and Au doping cause some new electronic states in band gap of TiO₂. Meanwhile, it is found that the visible optical absorptions of Cu, Ag, and Au-doped TiO₂, are observed by analyzing the results of optical properties, which locate in the region of 400-1000 nm. The absorption band edges of Cu, Ag, and Au-doped TiO₂ shift to the long wavelength region compared with the pure TiO₂. Furthermore, according to the calculated results, we propose the optical transition mechanisms of Cu, Ag, and Au-doped TiO₂. Our results show that the visible light response of TiO₂ can be modulated by substitutional doping of Cu, Ag, and Au.     

Concentration-dependent electronic structure and optical absorption properties of B-doped anatase TiO2

The concentration-dependent electronic structures and optical properties of B-doped anatase TiO₂ have been calculated using the density functional theory. The calculated results indicate that the electronic structures of B-doped TiO₂ have changed compared with those of pure TiO₂, which is mainly due to the new midgap states induced by B doping. As to the optical properties, we calculate the imaginary part of dielectric function ε₂(ω) and optical absorption spectra of pure and B-doped TiO₂. Two transitions E₁ and E₂ emerged after B doping. The intensity of absorption is enhanced by B doping both in the UV and visible regions. According to the results of imaginary part of dielectric function ε₂(ω) and DOS, it can be concluded that the two optical transitions correspond to the transitions from the O 2p states in the top of valence band to the midgap states and from the midgap states to the Ti 3d states in the bottom of conduction band, respectively. These results have important implications for the further development of photocatalytic materials.     

Estimation of contact area of nanoparticles in chains using continuum elastic contact mechanics

In this research, we have studied the doping behaviors of eight transition metal ion dopants on the crystal phase, particle sizes, XRD patterns, adsorption spectra, anatase fraction, and photoreactivity of TiO₂ nanoparticles. The pristine and ion-doped TiO₂ nanoparticles of 15.91-25.47 nm were prepared using sol–gel method. Test metal ion concentrations ranged from 0.00002 to 0.2 at.%. The absorption spectra of the TiO₂ nanoparticles were characterized using UV-Visible spectrometer. The wavelength of the absorption edge of TiO₂ was estimated using the spectra derivative-tangent method. The photoreactivities of pristine and ion-doped TiO₂ nanoparticles under UV irradiation were quantified by the decoloring rate of methyl orange. XRD patterns were recorded using a Rigaku D/MAX-2500 V diffractometer with Cu Kα radiation (50 kV and 250 mA), and particle size and anatase fraction were calculated. Results reveal that different ion doping exhibited complex effects on the studied characteristics of TiO₂ nanoparticles. In general, red shift occurred to ion-doped TiO₂ nanoparticles, but still with higher TiO₂ photoreactivities when doped with Fe³⁺ and Ni²⁺ ions. Among the ions investigated, Ni-doped TiO₂ nanoparticles have shown highest photoreactivity at the concentration of 0.002 at.%, about 1.9 times that of the pristine TiO₂. Ion doping was shown to reduce the diameter and influence the fraction of anatase. Data also indicated that the combination of anatase diameter and ion radius might play an important role in the photoreactivity of TiO₂ nanoparticles. This investigation contributes to the understanding of complex ion doping effects on TiO₂ nanoparticles, and provides references for enhancing their environmental application.     

Oxygen vacancy in N-doped Cu2O crystals: A density functional theory study

The N-doping effects on the electronic properties of Cu2O crystals are investigated using density functional theory. The calculated results show that N-doped Cu2O with or without oxygen vacancy exhibits different modifications of electronic band structure. In N anion-doped Cu2O, some N 2p states overlap and mix with the O 2p valence band, leading to a slight narrowing of band gap compared with the undoped Cu2O. However, it is found that the coexistence of both N impurity and oxygen vacancy contributes to band gap widening which may account for the experimentally observed optical band gap widening by N doping.     

氮铁共掺锐钛矿相TiO2电子结构和光学性质的第一性原理研究

本文采用基于密度泛函理论的平面波超软赝势方法研究了N,Fe共掺杂TiO₂的晶体结构、电子结构和光学性质.研究表明,N,Fe共掺杂TiO₂的晶格体积、原子间的键长及原子的电荷量发生变化,导致晶体中产生八面体偶极矩,并因此光生电子-空穴对有效分离,提高TiO₂的光催化活性;N,Fe共掺杂同时在导带底和价带顶形成了杂质能级,使TiO₂的禁带宽度变窄,光吸收带边红移到可见光区,这些杂质能级可以降低光生载流子的复合概率,提高Ti     

Electronic and optical properties of pure and Mo doped anatase TiO2 using GGA and GGA+U calculations

Comparative GGA and GGA+U calculations for pure and Mo doped anatase TiO₂ are performed based on first principle theory, whose results show that GGA+U calculation provide more reliable results as compared to the experimental findings. The direct band gap nature of the anatase TiO₂ is confirmed, both by using GGA and GGA+U calculations. Mo doping in anatase TiO₂ narrows the band gap of TiO₂ by introducing Mo 4d states below the conduction band minimum. Significant reduction of the band gap of anatase TiO₂ is found with increasing Mo doping concentration due to the introduction of widely distributed Mo 4d states below the conduction band minimum. The increase in the width of the conduction band with increasing doping concentration shows enhancement in the conductivity which may be helpful in increasing electron–hole pairs separation and consequently decreases the carrier recombination. The Mo doped anatase TiO₂ exhibits the n-type characteristic due to the shifting of Fermi level from the top of the valence band to the bottom of the conduction band. Furthermore, a shift in the absorption edge towards visible light region is apparent from the absorption spectrum which will enhance its photocatalytic activity. All the doped models have depicted visible light absorption and the absorption peaks shift towards higher energies in the visible region with increasing doping concentration. Our results describe the way to tailor the band gap of anatase TiO₂ by changing Mo doping concentration. The Mo doped anatase TiO₂ will be a very useful photocatalyst with enhanced visible light photocatalytic activity.     

CH3OH/TiO2(110)界面的光电子能谱研究

Methanol/TiO₂(110) is a model system in the surface science study of photocatalysis where methanol is taken as a hole capture. However, the highest occupied molecular orbital of adsorbed methanol lies below the valence band maximum of TiO₂, preventing the hole transfer. To study the level alignment of this system, electronic structure of methanol covered TiO₂(110) surface has been measured by ultraviolet photoelectron spectroscopy and the molecular orbitals of adsorbed methanol have been clearly identified. The results indicate the weak interaction between methanol and TiO₂ substrate. The static electronic structure also suggests the mismatch of the energy levels. These static experiments have been performed without band gap excitation which is the prerequisite of a photocatalytic process. Future study of the transient electronic structure using time-resolved UPS has also been discussed.     

Electronic structure and hot carrier relaxation in ⟨001⟩ anatase TiO2 nanowire

We present an electronic structure and non-adiabatic excited state dynamics study of ?001? anatase TiO₂ nanowire (NW) by combining density matrix formalism and ab initio electronic structure calculations. Our results show that quantum confinement increases the energy gap as the dimension of TiO₂ is reduced from the bulk to a NW with a diameter of several nanometres and that the probability of electronic transitions induced by lattice vibrations for the NW follows band gap law. The electron non-radiative relaxation to the bottom of the conduction band is involving Ti 3d orbitals, while the hole non-radiative relaxation of holes to the top of the valence band occurs by subsequent occupation of O 2p orbitals.     

First-principles calculations on TiO2 doped by N, Nd, and vacancy

First-principles density functional theory calculations have been carried out to investigate electronic structures of anatase TiO₂ with substitutional dopants of N, Nd, and vacancy, which replace O, Ti, and O, respectively. The calculation on N-doped TiO₂ with the local density approximation (LDA) demonstrates that N doping introduces some states located at the valence band maximum and thus makes the original band gap of TiO₂ smaller. Examining the effect of the strong correlation of Nd 4f electrons on the electronic structure of Nd-doped TiO₂, we have obtained the half-metallic ground state with the LDA and the insulating ground state with the LDA+U (Hubbard coefficient), respectively. In addition, the calculation on vacancy-doped TiO₂ with the LDA shows that a vacancy can induce some states in the band-gap region, which act as shallow donors.     

Nd高掺杂锐钛矿相TiO2电子结构和吸收光谱的第一原理研究

基于密度泛函理论平面波超软赝势方法, 采用第一原理研究未掺杂和不同浓度Nd高掺杂锐钛矿相TiO₂的电子结构和吸收光谱. 计算结果表明, 在本文限定的Nd高掺杂浓度范围内, Nd高掺杂浓度越小, 锐钛矿相TiO₂的禁带宽度越窄, 吸收光谱发生红移越显著. 计算结果与实验结果变化趋势相一致.     

Structural, magnetic and electronic structure studies of Mn doped TiO2 thin films

We report structural, magnetic and electronic structure study of Mn doped TiO₂ thin films grown using pulsed laser deposition method. The films were characterized using X-ray diffraction (XRD), dc magnetization, X-ray magnetic circular dichroism (XMCD) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy measurements. XRD results indicate that films exhibit single phase nature with rutile structure and exclude the secondary phase related to Mn metal cluster or any oxide phase of Mn. Magnetization studies reveal that both the films (3% and 5% Mn doped TiO₂) exhibit room temperature ferromagnetism and saturation magnetization increases with increase in concentration of Mn doping. The spectral features of XMCD at Mn L_3,2 edge show that Mn²⁺ ions contribute to the ferromagnetism. NEXAFS spectra measured at O K edge show a strong hybridization between Mn, Ti 3d and O 2p orbitals. NEXAFS spectra measured at Mn and Ti L_3,2 edge show that Mn exist in +2 valence state, whereas, Ti is in +4 state in Mn doped TiO₂ films.     

X-ray spectroscopic study of the electronic structure of visible-light responsive N-, C- and S-doped TiO2

The electronic origins of the visible-light response of N-, C- and S-doped TiO₂ have been studied using X-ray absorption, X-ray emission, and X-ray photoelectron spectroscopies. New electronic states are observed in the bulk band gap, above the valence band edge of pure TiO₂, which can be directly related to the visible-light absorption of the N-, C- and S-doped TiO₂ materials.     

Y掺杂SrTiO3晶体材料的电子结构计算

采用基于第一性原理的密度泛函理论平面波超软赝势法, 研究了Y掺杂SrTiO₃体系的空间结构和电子结构性质, 得到了优化后体系的结构参数, 掺杂形成能, 能带结构和电子态密度. 对比掺杂浓度为0125, 025, 033时,Sr_1-xY_xTiO₃和SrTi_1-xY_xO₃的掺杂形成能,发现Y替代Sr能形成更稳定的结构. 对Sr_1-xY_xTiO₃（x=0, 0125, 025, 033） 的结构进行了优化,结果表明Y替代Sr后, 随着掺杂浓度增大, 体系的晶格常数逐渐减小, 稳定性逐渐增强. 对不同掺杂浓度的Sr_1-xY_xTiO₃能带结构的计算结果表明：纯净的SrTiO₃是绝缘体, 价带顶在R点, 导带底在Γ点, 费米能级处于价带顶; 掺杂Y后, 费米能级进入到导带底中, 体系呈金属性;掺杂浓度越大,费米能级进入导带的位置越深,禁带宽度也近似变宽. 关键词： 3')" href="#">SrTiO₃ 电子结构 掺杂 VASP     

Mg,Al掺杂对LiCoO2体系电子结构影响的第一原理研究

为了研究Mg, Al掺杂对锂二次电池正极材料LiCoO₂体系的电子结构的影响，进而揭示Mg掺杂的LiCoO₂具有高电导率的机理，对Li(Co, Al)O₂和Li(Co, Mg)O₂进行了基于密度泛函理论的第一原理研究. 通过对能带及态密度的分析，发现在Mg掺杂后价带出现电子态空穴，提高了电导，并且通过歧化效应（disproportionation）改变了Co-3d电子在各能级的分布，而Al掺杂则没有这些作用. O关键词： 2')" href="#">LiCoO₂ 电子结构 第一原理 电导     

Origin of visible-light-induced photocatalytic properties of S-doped anatase TiO2 by first-principles investigation

Electronic structures and optical absorption spectra of S-doped anatase TiO₂ are calculated by means of the first-principles pseudopotential total energy method. Electronic structure analyses demonstrate that isolated S 3p states which appear on the upper edge of the valence band cause the narrowing of the band gap of S-doped TiO₂. These changes of electronic structure exert great influence on the optical responses of S-doped TiO₂. Our results are in line with recent experimental observations that the redshift of optical absorption could be attributed to these isolated S 3p states on the upper edge of the valence band of S-doped TiO₂.     

Understanding the Effects of Point Defects on the Electronic Properties of Titania Nanoparticles: An Ab Initio Study

First-principles calculations are used to study the electronic structure of the TiO₂(101) surface. The effect of oxygen vacancies and interstitial titanium ions on the electronic structure is investigated, and models for optical single-electron charge transfer transitions in the structure are proposed. We found that the addition of an uncharged oxygen vacancy leads to a shift of the total density of states toward lower energy, and the bandgap increases. Therefore, interstitial titanium ion incorporation induces donor states above the valence band and increases the bandgap. These results can be used to explain the observed blueshift in nanoscale TiO_2.     

过渡金属(Fe,Co,Ni,Zn)掺杂金红石TiO2的电子结构和光学性质

采用基于密度泛函理论的第一性原理方法对未掺杂以及不同浓度过渡金属Fe,Co,Ni,Zn掺杂金红石TiO₂的超晶胞体系进行了几何优化,并讨论了其晶格常数,电子能带结构和光学性质.研究结果表明:掺杂前后的晶格参数与实验值偏差在3.6%以下;适量的过渡金属掺杂不但影响体系能带结构,拓宽光吸收范围,而且扮演着俘获电子的重要角色,有利于光生电子-空穴对的有效分离以及增强光吸收能力;Fe,Co,Ni,Zn最佳理论掺杂体系分别为Ti_0.75Fe_0.25O₂,Ti_0.75Co_0.25O₂,Ti_0.75Ni_0.25O₂,Ti_0.83Zn_0.17O₂;Fe,Co,Ni3d态分裂为t_2g和e_g态,分别贡献于价带高能级和导带低能级部分,促进了电子-空穴对的生成,从而可提高TiO₂的光催化性能;Zn3d态电子成对填满轨道,不易被激发,故光催化活性无明显提高.     

“In situ” XPS study of band structures at Cu2O/TiO2 heterojunctions interface

In an attempt to investigate influence of the defects on electronic structure of Cu₂O/TiO₂ heterojunctions, thin Cu₂O layers were successively deposited on TiO₂ that has different levels of defect concentrations, and the resultant band bending and offset characteristics were studied by in situ X-ray photoelectron spectroscopy (XPS). The TiO₂ substrates with defects were prepared by Ar⁺ sputtering, followed by annealing at different temperatures in oxygen atmosphere. Presence of the defects in TiO₂ surface dramatically influences on the band bending and band offset at the interface: more defects are on TiO₂ surface, less band bending are at the interface, inducing smaller conduction band offsets. On the reduced TiO₂ surface, Cu₂O was disproportionately decomposed to form CuO and Cu.     

First-principles study on anatase TiO2 codoped with nitrogen and praseodymium

The crystal structures, electronic structures and optical properties of nitrogen or/and praseodymium doped anatase TiO₂ were calculated by first principles with the plane-wave ultrasoft pseudopotential method based on density functional theory. Highly efficient visible-light-induced nitrogen or/and praseodymium doped anatase TiO₂ nanocrystal photocatalyst were synthesized by a microwave chemical method. The calculated results show that the photocatalytic activity of TiO₂ can be enhanced by N doping or Pr doping, and can be further enhanced by N+Pr codoping. The band gap change of the codoping TiO₂ is more obvious than that of the single ion doping, which results in the red shift of the optical absorption edges. The results are of great significance for the understanding and further development of visible-light response high activity modified TiO₂ photocatalyst. The photocatalytic activity of the samples for methyl blue degradation was investigated under the irradiation of fluorescent light. The experimental results show that the codoping TiO₂ photocatalytic activity is obviously higher than that of the single ion doping. The experimental results accord with the calculated results.