Ba10(PO4)4(SiO4)2∶Eu2+荧光体的光谱特性

采用高温固相法合成了荧光体Ba₁₀（PO₄）₄（SiO₄）₂：Ce³⁺和Ba₁₀（PO₄）₄（SiO₄）₂：Eu²⁺,研究了两种荧光体的光谱特性。结果表明,两者都呈现较强的宽带激发特征。根据同种基质中Eu²⁺和Ce³⁺两种离子光谱特征的相关性,通过测得的Ba₁₀（PO₄）₂（SiO₄）₂基质中Ce³⁺的光谱数据估算了Ba₁₀（PO₄）₂（SiO₄）₂：Eu²⁺中Eu²⁺的斯托克斯位移（ΔS）和激发能量,估算结果与Ba₁₀（PO₄）₂（SiO₄）₂：Eu²⁺样品的光谱分析结果十分吻合。Ba₁₀（PO₄）₂（SiO₄）₂：Eu²⁺可以同时被紫光和蓝光激发,发出偏白的绿光,可用作白光LED的荧光粉。     

含新结构单元[Co3(SS)3(PR3)3]的钴化合物的磁性研究

通过含新结构单元钴化合物:Co₃(bdt)₃(PBu₃)₃(Ⅰ),Co₃(tdt)₃(PBu₃)₃(Ⅱ),[Co₃(bdt)₃(PPh₃)₃][CoBr₃(dmf)](Ⅲ)和[Co₃(edt)₃(PEtB)₃]₂[Co₂Cl₄(Et₂SO₂)₂](Ⅳ)(bdt=1,2-S₂C₆H₄^2-,tdt=4-Me-1,2-S₂C₆H₃^2-,edt=SCH₂CH₂S^2-)的磁极矩和¹H NMR等研究表明:它们均具顺磁性,钴原子之间存在着反铁磁偶合作用,同时还讨论了它们的磁学性质和分子结构之间关系。     

富勒烯衍生物C60（CF3）n（n=2，4，6，10）几何结构和电子性质变化规律的密度泛函研究

采用密度泛函理论中的广义梯度近似对C₆₀（CF₃）_n （n=2,4,6,10）几何结构和电子性质的变化规律进行了计算研究.发现在C₆₀（CF₃）₄可能稳定存在的三种同分异构体中,具有p p p加成方式的衍生物热力学性质最为稳定;在C₆₀（CF₃）₆可能稳定存在的三种同分异构体中,具有p p p m p加成方式的衍生物热力学性质最为稳定.对C₆₀（CF₃）₂,C₆₀（CF₃）₄,C₆₀（CF₃）₆和C₆₀（CF₃）₁₀四种加成衍生物的几何结构分析可知：随着CF₃加成个数的增加,C₆₀中的C—C平均键长逐渐变大,笼子与CF₃之间连接键C_C60—C_CF3逐渐变大.对它们的电子结构分析可知,随着CF₃加成数目的增多,反应热几乎是线性增加.而C₆₀（CF₃）_n（n=2,4,6,10）分子的平均反应热在n=6处为极大值,说明C₆₀（CF₃）₆应该是最容易得到的加成产物.由Mulliken电荷可知,加成的CF₃个数越多,CF₃与笼子的相互作用也就越强,每个CF₃转移到笼子上电荷数也就越多.C₆₀（CF₃）_n的自旋聚居数分布表明它们均为闭壳层结构.最后,从CF₃对分子的前线轨道贡献可知,四种分子的得电子情况和失电子情况均发生在碳笼本身,并不随着CF₃个数的增加而发生明显的改变. 关键词： 60（CF₃）_n （n=2')" href="#">C₆₀（CF₃）_n （n=2 10） 几何结构和电子性质 密度泛函     

Y2(Fe1-x-y,Coy,Crx)17化合 物的结构及居里温度

通过x射线衍射及磁测量手段研究了Y₂(Fe_1-y-x,Co_y,C r_x)₁₇化合物的结 构及居里温度.研究结果表明Y₂(Fe_1-y-x,Co_y,Crx)₁₇化合物具有六 角相的Th₂Ni₁₇型结构.随着x的增加，Y₂(Fe 关键词： 2(Fe_1-y-x')" href="#">Y₂(Fe_1-y-x y')" href="#">Co_y x)_{1 7}化合物')" href="#">Cr_x)_{1 7}化合物 x射线衍射 居里温度     

钚氧化物中氢行为的第一性原理研究

通过第一性原理计算和原子级热力学方法，系统研究H、H₂在PuO₂和α-Pu₂O₃中的吸附、扩散和溶解行为.研究发现：氢的上述行为均是吸热过程，但在α-Pu₂O₃与PuO₂中有显著不同：在α-Pu₂O₃中H可自发聚合成H₂，但在PuO₂中H难再聚合；在α-Pu₂O₃中H、H₂均能扩散，通常H会聚合成H₂再扩散，在PuO₂中H₂解离后才能扩散，且PuO₂中H沿高势能面的扩散比α-Pu₂O₃中H₂扩散更容易；在氢压、温度驱动下，氢在α-Pu₂O₃中存在H₂溶解到H+H₂混合溶解机制的转变，平衡气压P_H2远小于H在PuO₂中溶解的情况.基于此，给出PuO₂和α-Pu₂O₃中氢行为的微观图像和PuO₂的阻氢微观机制：PuO₂表面限制H₂解离、渗透，PuO₂块体限制H的溶解，但不阻止H扩散.结合钚氧化层表面氢行为研究获得了钚氢化孕育期的微观机制，为孕育期全过程理论建模提供依据.     

碳氮缺陷修饰g-C3N4/WS2异质结光催化性质的第一性原理研究

本文采用第一性原理方法计算了四种不同g-C₃N₄/WS₂异质结的超晶胞结构、功函数、能带结构、态密度和吸收光谱,研究了不同缺陷对g-C₃N₄/WS₂异质结的电子结构和光催化性能的影响.发现g-C₃N₄/WS₂、g-C₃N₄/WS₂-V_1N、g-C₃N₄/WS₂-V_1N1C、g-C₃N₄/WS₂-V_1N2C均能形成稳定的异质结,g-C₃N₄/WS₂-V_1N1C和g-C₃N₄/WS₂-...     

双色噪声驱动非对称双稳系统平均第一穿越时间研究

利用统一色噪声近似理论,研究乘性色噪声和加性色噪声驱动的非对称双稳系统中,势阱的非对称性和噪声对系统两个方向的平均第一穿越时间T₊（x_s1→x_s2）和T_-（x_s2→x_s1）的影响（x_s1和x_s2是双稳系统的两个稳定点）.数值结果表明：T₊（x_s1→x_s2）随乘性噪声的自关联时间τ₁以及加性噪声的自关联时间τ₂的增大而减小.T_-（x_s2→x_s1）随乘性噪声的自关联时间τ₁以及加性噪声的自关联时间τ₂的增大而增大.在曲线（T₊（x_s1→x_s2）,λ）和（T_-（x_s2→x_s1）,λ）上都存在单峰.T₊（x_s1→x_s2）随非对称系数r的增大而增大,T_-（x_s2→x_s1）随非对称系数r的增大而减小. 关键词： 统一色噪声近似 平均第一穿越时间 加性色噪声 乘性色噪声     

金属-半导体超晶格中界面电荷的生成机理

采用LMTO ASA能带计算方法，研究(Si₂)₃ (2Al) ₆ (001),(Ge₂)₃ (2Al) ₆ (001),(Ge₂)₃ (2Au) ₆ (001)和(Ge₂)₃ (2Ag) ₆ (001)超晶格中半导体界面电荷Qss的生成机理，结 关键词： Schottky势垒 界面电荷     

Mo-SiO2-C3H6催化反应体系的ESR动态表征

文章考察了Mo-SiO₂催化剂体系在丙烯歧化反应过程中的动态ESR波谱,发现在催化歧化反应过程中有两种Mo⁵⁺顺磁中心,一种为扰动八面体配位,g_||=1.89,g_⊥=1.94;另一种为扰动四棱锥配位,g_||=1.86,g_⊥=1.95。测得同位素^95,97Mo⁵⁺的各向异性超精细耦合常数A_||=90.3×10^-4cm^-1,A_⊥=44.8×10^-4cm^-1;观测到反应产生的积炭信号,g≈2.0O₂;氧阴离子自由基信号g₁=2.018,g₂=2.011,g₃=2.005。用LCAO-MO理论对上述Mo⁵⁺的ESR波谱进行计算,求得分子轨道系数,发现并总结出△g_||/△g_⊥与△g成直线关系,并建议用△g_||/△g_⊥=4(△E(B₂→E))/(△E(B₂→B₁)(β₁/ε)²之比值作为衡量C_4v扰动程度的尺度。     

两种以Znq2为基体的新型电致发光材料的合成与性能

以8-羟基喹啉为配体的金属配合物是一种性能优良的有机电致发光材料,其中有关8-羟基喹啉铝(Alq₃)研究已有大量报道,8-羟基喹啉锌(Znq₂)研究还有待发展。介绍了两种以Znq₂为基体的新型有机电致发光材料Znq₂(H₂O)₂和(Znq₂)₄的合成方法。用IR、XRD、TG、DTA和荧光测试方法进行表征与分析表明:Znq₂(H₂O)₂和(Znq₂)₄的玻璃化温度(T_g)分别为104.2℃和204.9℃;在161℃下Znq₂(H₂O)₂脱去水分子成为Znq₂,在361℃高温下四聚体(Znq₂)₄裂解为单体Znq₂;Znq₂(H₂O)₂和(Znq₂)₄具有很好的发光性能,在光致发光谱中λ_max分别是505,550nm。     

ATML测试资源与测试需求自动匹配方法研究

基于ATML测试描述文档自动生成测试程序过程中,关键是实现测试资源与测试需求的自动匹配。首先对ATML测试描述文档中测试能力、测试需求、开关、端口、能力与资源的映射等基本数据元素的表示方法进行分析研究,定义了与其对应的C 数据类型。然后在研究图论相关理论的基础上,分析了描述文档中测试路径的表示方法,确定了采用邻接矩阵表示测试路径的方法。最后,在以上研究的基础上,提出了以稀疏矩阵和单链表为基础的测试能力与测试需求匹配算法,实现了测试能力与测试需求的自动匹配。该算法在实际测试程序开发中得到了应用,结果表明该算法能够实现基于ATML描述文档的测试资源与测试需求自动匹配,并能极大提供测试程序开发效率。     

飞机跑道胶痕的自动识别系统设计与实现

为了减轻机场跑道除胶工作人员的劳动强度,提高除胶工作效率,文章提出了一种基于机器视觉的胶痕自动查找和识别方法,设计了基于ARM单片机控制的图像无线采集和基于PC机控制的图像接收、图像预处理和图像识别系统。文章通过分析预处理后的数据特点,确定了基于细胞神经网络算法的胶痕识别算法,然后在MATLAB仿真环境下确定了该算法的最优模型和参数,最后在Visual C++ 6.0环境下完成了该算法的程序编译,调试并完成了对胶痕的自动识别过程。理论仿真和程序测试的结果证明了文章提出的方法在胶痕自动识别系统中的可行性,也为机场特种设备的无人化和智能化提供了参考。     

Ratios ofB andD meson decay constants with heavy quark symmetry

SU(3) flavor symmetry allows the decay constantsf _{D 1} andf _{D 2} as well asf _{B 1} andf _{B 1} to be equal. But due toSU(3) flavor symmetry breaking the ratiosf _{B 1}/f _{B 2} andf _{D 1}/f _{D 2} are deviated from unity. We have estimated these ratios in the heavy quark effective theory and obtainedf _{B 1}/f _{B 2}=0.93,f _{D 1}/f _{D 2}=0.94 and the double ratio (f _{B 1}/f _{B 2})/(f _{D 1}/f _{D 2})=0.99.     

Reduction of hysteresis loss and large magnetocaloric effects in substituted compounds of itinerant-electron metamagnets La(FexSi1−x)13

The maximum value of hysteresis loss E_h^MAX due to the itinerant-electron metamagnetic (IEM) transition of La(Fe_xSi_1−x)₁₃ and the partially substituted compounds La_1−zCe_z(Fe_0.86Si_0.14)₁₃ and La_1−z′Pr_z′(Fe_0.86Si_0.14)₁₃ increases when the magnetocaloric effects (MCEs) become large. It should be noted that the reduction of E_h^MAX without the decrease of large MCEs is achieved in La_1−zCe_z(Fe_0.86Si_0.14)₁₃ and La_1−z′Pr_z′(Fe_0.86Si_0.14)₁₃. For both the compound systems mentioned above, the critical temperature T₀ for the IEM transition decreases and the difference between T₀ and the Curie temperature T_C becomes larger with decreasing T_C. These results are consistent with the magnetic phase diagram of La(Fe_0.86Si_0.14)₁₃ under hydrostatic pressure. Consequently, the reduction of E_h^MAX in La_1−zCe_z(Fe_0.86Si_0.14)₁₃ and La_1−z′Pr_z′(Fe_0.86Si_0.14)₁₃ is closely related with the magnetovolume effects.     

Improvement of sonocatalytic activity of TiO2 by using Yb,N and F-doped Er3+:Y3Al5O12 for degradation of organic dyes

In this study, several up-conversion luminescence agents (Er³⁺:Y₃Al₅O₁₂, Er³⁺:Yb_0.2Y_2.79Al₅O₁₂, Er³⁺:Yb_0.2Y_2.79Al₅N_0.01O_11.99, Er³⁺:Yb_0.2Y_2.79Al₅F_0.01O_11.99 and Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98) were synthesized using sol–gel method. And then, the corresponding sonocatalyst (Er³⁺:Y₃Al₅O₁₂/TiO₂, Er³⁺:Yb_0.2Y_2.79Al₅O₁₂/TiO₂, Er³⁺:Yb_0.2Y_2.79Al₅N_0.01O_11.99/TiO₂, Er³⁺:Yb_0.2Y_2.79Al₅F_0.01O_11.99/TiO₂ and Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98/TiO₂ coated composites) were prepared by sol–gel coating process. The synthesized up-conversion luminescence agents and their coated composites were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). And that, the sonocatalytic activities were detected through the degradation of Azo Fuchsine (AF) dye in aqueous solution by UV–vis spectroscopy. Some key influences such as heat-treated temperature and heat-treated time on the sonocatalytic activity of Er³⁺:Yb_aY_2.99−aN_xF_yAl₅O_12−x−y/TiO₂ coated composite, as well as ultrasonic irradiation time and initial dye concentration on the sonocatalytic degradation were studied. The results showed that the doping of Yb, N and F into Er³⁺:Y₃Al₅O₁₂/TiO₂ significantly enhanced the sonocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂ coated composite in the degradation of organic dyes. Particularly, Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98/TiO₂ coated composites with 3:7 M ratio heat-treated at 550 °C for 60 min showed the highest sonocatalytic activity. At last, the experiments also indicated that the Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98/TiO₂ coated composites has a good sonocatalytic activity to degrade other organic dyes under ultrasonic irradiation.     

The effect of Nb addition on the thermal stability and magnetic properties of Fe-based amorphous alloys with a wide supercooled liquid region

We have examined the effect of Nb addition on the thermal stability of the supercooled liquid before crystallization, the glass-forming ability and magnetic properties for the amorphous alloy series Fe₇₃Nb_xAl_5-xGe₂P₁₀C₆B₄ and Fe₆₃Co₇Nb_xZr_10-xB₂₀. The supercooled liquid regions (ΔT_x=T_x-T_g) have maximum values of 66 and 79K, respectively, for Fe₇₃Nb₁Al₄Ge₂P₁₀C₆B₄ and Fe₆₃Co₇Nb₄Zr₆B₂₀ alloys. The saturation magnetization σ_s of the Fe₇₃Nb_xAl_5-xGe₂P₁₀C₆B₄ alloy system is much higher than that of the Fe₆₃Co₇Nb_xZr_10-xB₂₀ alloy system, and is almost unchanged with an increasing Nb content from 0 to 3 at%. But the σ_s of the Fe₆₃Co₇Nb_xZr_10-xB₂₀ alloys decreases linearly with increasing Nb content. The coercive force H_c of the two alloy series can have a minimum value of 31A/m for Fe₇₃Nb₁Al₄Ge₂P₁₀C₆B₄ and 37A/m for Fe₆₃Co₇Nb₄Zr₆B₂₀. All these values are for the ribbons annealed at 773 and 873K for 15min in vacuum.     

Structural properties of composite cathode material LiFePO<Subscript>4</Subscript>–Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Composite cathode material LiFePO₄–Li₃V₂(PO₄)₃ is synthesized through a chemical reduction and lithiation using FeVO₄·xH₂O as both iron and vanadium sources. The structural properties of LiFePO₄–Li₃V₂(PO₄)₃ are investigated. X-ray diffraction results show the composite material containing olivine type LiFePO₄ and monoclinic Li₃V₂(PO₄)₃ phases. High-resolution transmission electron microscopy and energy-dispersive X-ray spectrometry results indicate that mutual doping effects take place between the LiFePO₄ and Li₃V₂(PO₄)₃ particles with V³⁺ doping the LiFePO₄ while Fe²⁺ dopes the Li₃V₂(PO₄)₃. LiFePO₄–Li₃V₂(PO₄)₃ nanocomposites are formed in the carbon webs. There is no structural compatibility between monoclinic (Li₃V₂(PO₄)₃) and olivine (LiFePO₄) domains in composite material LiFePO₄–Li₃V₂(PO₄)₃.     

Influence of oxidized interlayers on magnetic properties of multilayer films based on amorphous ferromagnet–dielectric nanocomposites

Films of composites (Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x, (Co₈₄Nb₁₄Ta₂)_x(SiO₂)_100–x, (Co₄₁Fe₃₉B₂₀)_x(SiO₂)_100–x and multilayer heterogeneous composite–composite structures {[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x]/[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x + N₂]}_n, {[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x]/[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x + O₂]}_n, {[(Co₄₁Fe₃₉B₂₀)_x(SiO₂)_100–x]/[(Co₄₁Fe₃₉B₂₀)_x(SiO₂)_100–x + O₂]}_n, and {[(Co₈₄Nb₁₄Ta₂)_x(SiO₂)_100–x]/[(Co₈₄Nb₁₄Ta₂)_x(SiO₂)_100–x + O₂]}_n have been deposited using the ionbeam sputtering method with a cyclic supply of reaction gases during deposition. The structure and magnetic properties of the films have been studied. It has been shown that the introduction of an oxidized interlayer makes it possible to suppress the perpendicular magnetic anisotropy in the (Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x composite with the metallic phase concentration higher than the percolation threshold.     

Fit values of N subshell fluorescence yields and Coster-Kronig yields for elements with 38?Z?103

Most probable values of Coster-Kronig (CK) transition probabilities (S₁₂, S₁₃, S₁₄, S₁₅, S_1,67, S₂₃, S₂₄, S_2,67, S₃₄, S₃₅, S₃₅, S_3,67, S₄₅ and S_4,67) and N_i subshell fluorescence yields (N₁, N₂, N₃, N₄, N₅ and N₆₇) have been determined by using least-squares fitted to obtain the polynomials, which is plotted by using the McGuire's values (Phys Rev A 9(5) (1974) 1840), representing them as a function of atomic number. The S_ij represents the N subshell vacancy transitions from ith subshell to jth subshell. The obtained values of N_i subshell fluorescence yields—N₁, N₂, N₃, N₄, N₅, N₆₇, and CK transition probabilities—S₁₂, S₁₃, S₁₄, S₁₅, S_1,67, S₂₃, S₂₄, S_2,67, S₃₄, S₃₅, S₃₅, S_3,67, S₄₅ and S₄₆ are presented.     

Improvement of the first coulomb efficiency and rate performance of Li1.5Ni0.25Mn0.75O2.5 with spinel LiNi0.5Mn1.5O4 doping

Li_1.1Ni_0.25Mn_0.75O_2.3 and Li_1.5Ni_0.25Mn_0.75O_2.5 have been synthesized by co-precipitation method. The effect of the LiNi_0.5Mn_1.5O₄ spinel structure on physical and electrochemical properties is discussed through the characterizations of X-ray diffraction (XRD), scanning electron microscopy, high-resolution transmission electron microscopy, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and electrochemical performance tests. The LiNi_0.5Mn_1.5O₄ spinel structure is detected in the XRD pattern, TEM image, first discharge, and CV curves of the Li_1.1Ni_0.25Mn_0.75O_2.3 electrode. The rate, cyclic performance, and first coulomb efficiency of Li_1.1Ni_0.25Mn_0.75O_2.35 are higher than those of Li_1.5Ni_0.25Mn_0.75O_2.5. The first coulomb efficiencies of Li_1.1Ni_0.25Mn_0.75O_2.3 and Li_1.5Ni_0.25Mn_0.75O_2.5 are 86.2 and 74.7 %, and the capacity retentions are 98.7 and 94.1 % after 50 cycles, respectively. EIS results indicate that the charge-transfer reaction resistance of Li_1.1Ni_0.25Mn_0.75O_2.3 is lower than that of Li_1.5Ni_0.25Mn_0.75O_2.5, which is responsible for the better rate capacity of Li_1.1Ni_0.25Mn_0.75O_2.3.