核物质的物态方程的研究

在相对论σ–ω模型的单圈图近似下,详细推导了核物质的能量密度和压强密度表达式,数值计算了核物质的结合能和压强随核密度的变化,并分别在热力学和流体力学的理论框架下,计算了核物质的压强密度,结果表明这两种方法得到的压强密度相同.     

冲击波加热的氩气的发射光谱

为了研究弱冲击条件下氩气的辐射特性,从二级轻气炮发射的89 W飞片以2.00 km/s的速度撞击封装有常态下氩气的LY12铝靶,用六通道瞬态高温计和示波器记录到受一次冲击压缩的氩气的光辐射信号随时间的变化规律:从405 nm到700 nm的5个通道信号为直线段,800 nm通道的信号为指数曲线段,并测量出相应的冲击波速度为4.10±0.09 k m/s.实验表明,冲击压缩的氩气对可见光的吸收系数较小,气体的光学厚度沿长波方向从光学薄向光学厚转变.二次冲击压缩氩气的辐射信号上升前沿的时间分辨光谱用OMA系统记录,并观察到450 nm附近有较强的发射光谱带,但没有观察到明显的线状光谱.通过冲击波后参数和氩气电离度的理论计算,解释了冲击压缩下氩气的发射光谱特性.     

光的偏振演示仪的制作

针对现行教材的内容制作了光的偏振演示仪.该演示仪既可以真实的演示光的偏振现象,又可以通过在形成驻波的弦上放置狭缝,模拟演示光的偏振现象,且驻波的振动频率连续可调.     

基于SystemModeler的物理模型的仿真

以RLC串联电路的暂态过程和耦合摆的运动为例子,介绍了仿真软件SystemModeler的使用。同时这也表明了SystemModeler是一款高效的、使用方便的仿真软件,可以在物理教学充分加以利用,以提高课堂教学效果。     

教学的平台 探索的基地 求知的乐园——实验物理教学的追求

文章从实验物理教学的范畴和性质出发,比较中外实验教学的差异,结合当前存在的问题,探讨理想的实验物理教学模式．提出实验物理教学应当以学生为中心,鼓励学生的自主创新精神和师生密切互动;发展实验教学中心应当以质量为重点,而不是盲目追求数量;努力把实验物理教学中心建设成为教学的平台、探索的基地、求知的乐园．     

太阳的故事——太阳的脉搏

 为了回答上一篇末尾的问题,即“有没有什么手段,能像太阳中微子带给我们核心区的信息那样,带给我们有关对流区深处及辐射区的信息呢？”让我们把时钟拨到1960 年。那一年,在意大利科摩湖畔的一座美丽小镇召开了一次天文学会议。在会上,来自美国威尔逊山天文台的天文学家莱顿作了一个学术报告。     

关于铁的势函数的研究

本文介绍了由Voter-Chan提出的嵌入式原子势模型(EAM),运用该原子势计算了单晶铁的弹性常数和在高压下的固固相变.模拟结果显示此EAM势描述铁的弹性常数与实验值有一定的偏离,但是却比较好的反映了铁在高压下的相变.此EAM势模型可以用来进一步研究铁在极端条件下的相变过程等,对相变的微观机制进行更细致深入的研究.     

永远的楷模 永远的怀念

虞福春教授耕耘物理学60余载，造诣超群，成绩卓著，贡献非凡。他为核磁共振谱学及其应用做出了奠基性的重大贡献，早已载入20世纪世界科技发展史册。他的教学科学研究实践遍及普通物理、原子核物理、原子与分子物理、物理实验、计算物理、电动力学、离子束物理及加速器射频技术等各个领域。     

电磁感应定律的发现与场的概念的提出

 迈克尔·法拉第是19世纪伟大的物理学家,他对物理学最卓越的贡献就是通过实验发现了电磁感应定律。当时法拉第受德国古典哲学中辩证思想的影响,认为电、磁、光、热之间是相互联系的。1820年奥斯特发现了电流对磁针的作用,法拉第敏锐地认识到了它的重要性。     

关于运动的钟变慢的讨论

"运动的钟变慢"是相互的.通过这个结论,本文进一步论证处在两个不同惯性系的两个时钟,它们的读数与观察者所处的惯性系无关.     

A methodology to achieve the basis function for the expansion of sound speed profile

In order to evaluate the reliability and applicability of the Empirical Orthogonal Functions（EOFs）in the acoustic inversion of sound speed profile（SSP）and reduce EOF＇s dependence on the sample data,a methodology is proposed for the achievement of the basis functions for SSP＇s expansion.By analyzing the oceanographic dynamics which is the main cause of the SSP＇s variation,the basis functions are obtained naming the Hydrodynamic Normal Modes（HNMs）.The HNM basis functions are almost the same as those derived from the EOF method,while HNMs has less dependence on the amount of the sample data.HNMs method has a physically meaningful interpretation,and it could give out the physical parameters which determine the basis functions for the expansion of SSP,and this makes it possible to analyze and evaluate the trustiness and applicability of EOFs.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Cooling induced by parametric resonance in a magnetic quadrupole trap

It is demonstrated experimentally that the anharmonic property of the quadrupole trap can be exploited to cool trapped atoms by modulating the trap potential anisotropically.This cooling effect arises from the energy-selective removal of the most energetic trapped atoms and the thermal equilibrium of the remaining atoms.The frequency dependences of the temperature and the fraction of the atoms left in the trap after the modulation are explored.It is also demonstrated that the cooling induced by parametric resonance can also increase the phase space density of the trapped atoms.     

Influence of dielectric microcavity on the spontaneous emission rate of atom: a perspective on the closed-orbit theory of photons

The formulas of the quantum electrodynamics have been applied to calculate the spontaneous emission rate of excited atom in dielectric microcavity.The results exhibit damping oscillating Patterns which depend sensitively on the scaling parameter and geometrical structure.Compared with the case that the emitting atom is immersed in dielectric,the spontaneous emission rate is depressed obviously and the center or the mean value of the oscillations is intimately related to the real refractive index of the local position where the atom is.In order to explain this phenomenon,we utilize the closed-orbit theory to deal with the classical trajectories of the emitted photon.and extract the corresponding frequencies of the oscillations by Fourier transform.It is found that the oscillations can be represented in terms of the closed-orbits of the photon motion constrained in dielectric microcavity,thus providing another perspective on the spontaneous emission of atom sandwiched by dielectric slabs.     

Recovery of the free field in noisy environment by using the spherical wave superposition method

To remove the scattering effect of the disturbing sound on the target source when implementing nearfield acoustic holography in a non-free field, a free field recovery technique based on the spherical wave superposition method is proposed. In the method, the sound field separation technique based on the spherical wave superposition method is first used to separate the incoming and outgoing fields, and a further step for separating the radiated and scattered fields is performed by utilizing the surface admittance of the target source as the boundary condition. The technique makes it possible to correctly identify noise sources in a non-free sound field. The basic principle of the technique is described firstly, a method for choosing the optimal number of spherical wave expansion terms is given, and two numerical simulations are used to demonstrate the validity of this technique. It is shown that, for the lower frequency, the scattering effect can be neglected, and the radiated field of the target source can be obtained by the sound field separation technique, however, as the increasing of the frequency, the scattering effect cannot be neglected, and the free field recovery technique has to be used to obtain the radiated field of the target source.     

Modeling of the RF system for the normal conducting linac

To study the new RF control methods, a mathematic model of the RF system for the normal conducting linac is built and implemented with the software of Matlab. The model contains some typical units of the RF system, such as the klystron, the SLED and the traveling wave accelerating tube. Finally, the model is used to study the working point of the SLED and the adaptive feed forward algorithm for the RF control system. Simulation shows that the model works well as expected.     

Voltage-controlled optical filter based on electrowetting

In this letter, we propose a voltage-controlled optical filter based on electrowetting. The device is made of a transparent cubic cell filled with two immiscible liquids having three indium tin oxide electrodes fabricated on the bottom substrate of the cell. A conductive droplet carrying a color filter is placed on the ITO electrode and the surrounding liquid is density-matched silicone oil. Under zero bias, the droplet is placed in the middle of the substrate and white light passes through the filter and we can see red light on the screen. When a voltage is applied to the device, the filter moves with the liquid based on electrowetting effect, we can see the white light on the screen. Due to the movement of the liquid, our device functions as an optical switcher. The switch time of the device is ~70 ms. The proposed device has a wide application in optical communication, electronic display, and optical switch.     

Experimental study on SC RF cavities by using China large grain niobium for ILC

Large grain niobium has the potential of simplifying the production sequence and consequently reducing the cost of the superconducting RF cavities for ILC.To investigate the feasibility of fabrication and the possibility to achieve high gradient by large grain cavities,two 1.3 GHz cavities were made of China large grain niobium and a series of vertical tests were carried out following several different surfaces treatment procedures.Two cavities have both reached the high gradient of more than 43 MV/m repeatedly and the maximum accelerating field of 47.9 MV/m has been achieved by China large grain niobium.This paper introduces the features of the fabrication and surface treatments on the large grain cavities and presents the preliminary results of the research.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

A subspace fitting algorithm of acoustic vector sensor array and corresponding matrix pre-filter design

In order to ease the pass-band response distortion of the matrix pre-filter,a simple approach for designing matrix spatial filter is proposed,which minimizes the sum of the k maximal distortion norm（k is the number of the constraint points）within the pass-band,while constraining the filter response within the stop-band.Considering the costly amount of calculation of the high-resolution methods,an algorithm with small amount of calculation based on matrix pre-filtering and subspace fitting using acoustic vector array（MF-VSSF）is proposed.Through joint processing of signal subspace of both pressure and particle velocity,the pre-filtering matrix and the signal subspace is decreased to M-dimensional（M is the number of array-element）,hence reduces the time-consumption of the matrix pre-filter design and DOA searching.Simulation results show that,the method offers the same performance as MUSIC with pre-filtering,but has much lesser amount of calculation.Moreover,the designed prefilter can efficiently suppress the interference in the stop-band and improve the estimation and resolution performance of successive DOA estimators.