均匀度估计的噪声源盲分离算法研究

盲信号分离技术是源输入未知时识别噪声源的一种有力手段。源的独立性常是应用盲分离算法的一个基本要求。但由于概率密度函数一般未知且估计繁琐,传统盲分离算法对源信号的独立性较难检验。为此,从信号独立性分析出发,理论上推导了随机变量的独立性和其概率分布函数的联合分布之间的关系,提出了一种独立性度量指标均匀度的估计算法,并给出了相应的盲分离算法。利用电机和海水泵的振动信号分离试验对方法进行了验证,并与现有的半熵盲分离算法进行比较,结果表明在分离效果和计算时间方面均优于现有的方法。充分说明了本文算法的有效性。      

瞬时混合盲源分离和最优波束形成的关系研究

最优波束形成和盲源分离是近几十年迅速发展起来的两种重要阵列信号处理方法,在瞬时混合情况下它们具有相似的信号模型,所以本文研究了二者之间的关系。指出,当不存在噪声时,多数盲源分离算法构造的是最优波束形成;当存在噪声时,可以利用盲源分离算法估计的信号导向向量设计最优波束形成。计算机仿真实验验证了这一结论。     

一种适用于微弱信号提取的盲源分离算法

本文首次提出了适用于微弱信号提取的盲源分离算法,这种方法是在常用的自然梯度串行更新算法基础上采用了有监督的机制。通过观察两个信号互相关的程度自动判别激活函数的种类,实现了超高斯亚高斯强弱信号混合下的盲源分离。信号仿真表明,有监督的盲源分离技术收敛速度较快,精度较高。     

EEMD与EFICA在单通道复合故障诊断中的应用

针对转子不对中和滚动轴承微弱损伤的复合故障诊断问题,提出了一种基于平均经验算法(Ensemble Empirical Mode Decomposition,EEMD)和高效快速独立分量分析(Efficient Variant of FastICA,EFICA)的盲源分离故障诊断方法。利用EEMD算法将单通路复合故障信号分解成多个不同信号特征的本征模函数(Intrinsic Mode Function,IMF),解决了盲源分离中的欠定问题。在此基础上利用EFICA算法对各个不同信号特征的IMF进行故障特征分离。通过仿真实验和转子实验台的实验结果,表明该算法可以有效分离出各个不同的故障特征。     

噪声背景下双输入时延混合系统的盲源分离

噪声背景下应用盲分离技术恢复源信号是盲信号处理的难点之一,本文主要研究了双输入时延有噪混合模型的盲分离方法,和传统的盲分离算法相比,该方法可以有效地利用多阵元的观测信号,对加性噪声具有相当的抑制作用。     

基于最大信噪比测量两相流速度

为了克服噪声对信号的影响,提出一种利用最大信噪比和相关法测量两相流速度的方法.基于最大信噪比的信号分离方法是一种盲源信号分离方法,该算法利用统计独立信号完全分离时信噪比最大作为分离准则,它具有非常低的计算复杂度.这里首先利用盲源信号分离方法分别提取出上游和下游两相流信号,并据此求出两相流信号的相关函数曲线,由此求出信号的渡越时间,最后给出仿真实验的处理结果.实验结果表明该方法能够满足两相流速度的测量要求.     

含噪混合数据中相关源信号的盲分离

本文在假设时间白噪声的基础上,通过对阵列施加一个较弱的旋转不变约束提出了一种针对相关源信号盲分离的方法。与现有方法相比,该方法不需要额外的源信号约束条件和噪声自相关矩阵的知识,因此具有较广的使用范围和较强的稳健性。另外,该方法较低的计算复杂度易于其工程实现。计算机仿真结果表明,本文提出的方法对于相关源信号的盲分离具有较好的效果。     

一种基于模式识别的多路盲语音提取方法

盲分离算法能在缺少混合系统参数的条件下仅由观测信号估计初始源,但分离信号存在固有的排列模糊性,这往往导致两次批处理过程中同一信号"对不准",因此很难获得连续的源信号。本文针对盲声源分离中存在的相同问题,根据语音和其他音频信号的特征差异,提出一种修正的自相关函数并以其值作为一个特征基元来表征声音信号的时序相关特性,同时用平均声门波形状参数作为另一个特征基元来表征语音产生的生理效应。以这两个参数作为识别不同音频信号的二维模式特征,采用一种模糊聚类算法提取多路盲分离语音。本方法有效克服了批处理盲声源分离中的信号排列顺序的不确定性,并通过选择合适的阈值提取多路连续语音。仿真给出了5路混合音频信号中盲提取两路连续语音的实验结果。     

基于核独立成分分析的舰船光尾流信号提取

舰船尾流的激光探测是一种新的鱼雷制导手段。水体的后向散射光信号是舰船尾流后向散射光信号检测的常见干扰,由于其在频域十分接近且信号强度大于尾流信号,因此难以用传统方法提取有用的尾流信号。针对这一问题,提出了一种基于盲源分离的处理方法,将核独立成分分析技术应用于舰船尾流后向散射光信号的提取。介绍了核独立成分分析的基本原理和具体算法,进行了仿真计算,并与传统独立成分分析算法进行比较。结果表明在盲源信号分离中,基于核空间的独立成分分析与其他独立成分分析算法相比更具有准确性。最后应用该方法对海上实验数据进行处理,提取出了舰船尾流信号,取得了良好的效果,验证了该算法的有效性。     

彩色视频提取心率信号的联合近似对角化算法

为了实现从彩色视频中有效提取心率信号,实时检测人体心率,提出使用基于特征矩阵联合近似对角化的盲源分离算法,从RGB彩色可见光视频信号中分离周期信号,为周期信号处理和周期分析得出心率提供数据基础,从而提高非接触式心率测量的准确性。同时利用matlab编写程序进行仿真实验,实验结果表明该算法能有效分离振幅在干扰信号波动范围的0.2及以上的源信号,分离信号与已知源信号相关系数高达0.8。     

Comparative intelligibility investigation of single-channel noise-reduction algorithms for Chinese, Japanese, and English

A large number of single-channel noise-reduction algorithms have been proposed based largely on mathematical principles. Most of these algorithms, however, have been evaluated with English speech. Given the different perceptual cues used by native listeners of different languages including tonal languages, it is of interest to examine whether there are any language effects when the same noise-reduction algorithm is used to process noisy speech in different languages. A comparative evaluation and investigation is taken in this study of various single-channel noise-reduction algorithms applied to noisy speech taken from three languages: Chinese, Japanese, and English. Clean speech signals (Chinese words and Japanese words) were first corrupted by three types of noise at two signal-to-noise ratios and then processed by five single-channel noise-reduction algorithms. The processed signals were finally presented to normal-hearing listeners for recognition. Intelligibility evaluation showed that the majority of noise-reduction algorithms did not improve speech intelligibility. Consistent with a previous study with the English language, the Wiener filtering algorithm produced small, but statistically significant, improvements in intelligibility for car and white noise conditions. Significant differences between the performances of noise-reduction algorithms across the three languages were observed.     

基于压缩感知的欠定源信号恢复算法比较

构建了基于压缩感知的欠定盲源分离源信号恢复模型,比较研究了基于互补匹配追踪算法(CMP)、基于L1范数的互补匹配追踪算法(L1CMP)和基于修正牛顿的径向基函数算法(NRASR)实现欠定源信号恢复的应用效果。结果表明:源信号时域充分稀疏情况下,CMP,L1CMP和NRASR的恢复效果接近,但L1CMP算法计算复杂度最低;变换域充分稀疏情况下,CMP和L1CMP恢复效果接近,NRASR恢复效果较差;时域非充分稀疏情况下,CMP效果较差,L1CMP和NRASR效果接近。综合考虑,L1CMP算法效果最佳;在观测信号数和源数较少的情况下,算法在时域恢复信号精度会下降;稀疏表示法结合压缩感知重构能够提高源信号恢复的效果。     

Optimal and adaptive methods of processing hydroacoustic signals (review)

Different methods of optimal and adaptive processing of hydroacoustic signals for multipath propagation and scattering are considered. Advantages and drawbacks of the classical adaptive (Capon, MUSIC, and Johnson) algorithms and “fast” projection algorithms are analyzed for the case of multipath propagation and scattering of strong signals. The classical optimal approaches to detecting multipath signals are presented. A mechanism of controlled normalization of strong signals is proposed to automatically detect weak signals. The results of simulating the operation of different detection algorithms for a linear equidistant array under multipath propagation and scattering are presented. An automatic detector is analyzed, which is based on classical or fast projection algorithms, which estimates the background proceeding from median filtering or the method of bilateral spatial contrast.     

Performance of time- and frequency-domain binaural beamformers based on recorded signals from real rooms

Extraction of a target sound source amidst multiple interfering sound sources is difficult when there are fewer sensors than sources, as is the case for human listeners in the classic cocktail-party situation. This study compares the signal extraction performance of five algorithms using recordings of speech sources made with three different two-microphone arrays in three rooms of varying reverberation time. Test signals, consisting of two to five speech sources, were constructed for each room and array. The signals were processed with each algorithm, and the signal extraction performance was quantified by calculating the signal-to-noise ratio of the output. A frequency-domain minimum-variance distortionless-response beamformer outperformed the time-domain based Frost beamformer and generalized sidelobe canceler for all tests with two or more interfering sound sources, and performed comparably or better than the time-domain algorithms for tests with one interfering sound source. The frequency-domain minimum-variance algorithm offered performance comparable to that of the Peissig-Kollmeier binaural frequency-domain algorithm, but with much less distortion of the target signal. Comparisons were also made to a simple beamformer. In addition, computer simulations illustrate that, when processing speech signals, the chosen implementation of the frequency-domain minimum-variance technique adapts more quickly and accurately than time-domain techniques.     

气液两相流电导波动信号复杂性测度分析及其流型表征

为了考察从时间序列提取的复杂性测度与气液两相流流型变化之间的关系，本文首先讨论了三种复杂性测度(Lempel-Ziv复杂性、功率谱熵和近似熵)对周期信号、随机信号、混合随机信号和混沌信号的识别能力，然后分析了时间序列长度对复杂性计算的影响.在此基础上，从实际测量的80种垂直上升管中气液两相流电导波动信号中提取了这三种复杂性测度，结果表明：三种复杂度对两相流流型变化是敏感的，通过对三种复杂度随两相流流动参数变化规律分析，可以得到气液两相流动力学结构反演特征，为揭示气液两相流流型转化机理提供了一种有效的辅助诊断工具. 关键词： 气液两相流 Lempel和Ziv复杂性 功率谱熵 近似熵     

基于Labview的快循环扫频信号相位差测量算法实现

为了实现对中国散裂中子源(CSNS)/快循环同步加速器(RCS)射频系统中高频加速电压和束流两个同步变化的快循环扫频信号之间相位差的精确测量,需要选择合适的信号采集方案与相位差测量算法。介绍了常用的同频信号相位差测量算法,讨论了不同相位差测量算法的特点与适用性;详细描述了快速傅里叶变换(FFT)交叉谱法与加余弦窗FFT插值法两种相位差测量算法的原理。为了研究这两种算法在扫频信号测量中的适用性,利用NI的虚拟仪器技术以及Labview图形化编程技术,搭建扫频信号相位差测量系统,对这两种相位差测量算法进行仿真模拟。仿真结果表明,加余弦窗FFT插值算法可以满足快循环扫频信号相位差测量精度的要求。     

Spectral theory of discrete processes

We offer a spectral analysis for a class of transfer operators. These transfer operators arise for a wide range of stochastic processes, ranging from random walks on infinite graphs to the processes that govern signals and recursive wavelet algorithms; even spectral theory for fractal measures. In each case, there is an associated class of harmonic functions which we study. And in addition, we study three questions in depth     

Detection of weak signals using fast projection algorithms

The problem of detecting weak signals in complex noise situations using projection adaptive algorithms is considered. The existing algorithms are analyzed, and a novel algorithm oriented at detecting weak signals is proposed. Results of the algorithm’s operation are demonstrated in a simulated noise situation consisting of interference signals with different intensities under the assumption of their multipath propagation and scattering. The proposed algorithm is compared with the well-known classical Capon algorithm, and a significant reduction in the contact loss time as applied to a low-noise target near strong interference sources is demonstrated.     

Comparison of beaked whale detection algorithms

Due to recent advances in passive acoustic monitoring techniques, beaked whales are now more effectively detected acoustically than visually during vessel-based (e.g. line-transect) surveys. Beaked whales signals can be discriminated from those of other cetaceans by the unique characteristics of their echolocation clicks (e.g. duration >175 μs, center frequencies between 30 and 40 kHz, inter-click intervals between 0.2 and 0.4 s and frequency upsweeps). Furthermore, these same characteristics make these signals ideal candidates for testing automated detection and classification algorithms. There are several different beaked whale automated detectors currently available for use. However, no comparative analysis of detectors exists. Therefore, comparison between studies and datasets is difficult. The purpose of this study was to test, validate, and compare algorithms for detection of beaked whales in acoustic line-transect survey data. Six different detection algorithms (XBAT, Ishmael, PAMGUARD, ERMA, GMM and FMCD) were evaluated and compared. Detection trials were run on three sample days of towed-hydrophone array recordings collected by NOAA Southwest Fisheries Science Center (SWFSC) during which were confirmed visual sightings of beaked whales (Ziphius cavirostris and Mesoplodon peruvianus). Detections also were compared to human verified acoustic detections for a subset of these data. In order to measure the probabilities of false detection, each detector was also run on three sample recordings containing clicks from another species: Risso’s dolphin (Grampus griseus). Qualitative and quantitative comparisons and the detection performance of the different algorithms are discussed.