Radiative intensity solution and thermal emission analysis of a semitransparent medium layer with a sinusoidal refractive index

The radiative intensity in a sinusoidal refractive index semitransparent medium layer is solved by the curved ray-tracing method in combination with the pseudo-source adding method. One boundary of the medium layer is an opaque diffuse substrate wall. The other boundary is a semitransparent specular or diffuse surface, from which the medium thermal emission emerges. With considering a linear temperature distribution, the radiative intensity formulae are, respectively, deduced under the two boundary conditions. On the basis of the radiative intensity solutions, the directional and hemispherical emission of the medium layer with a specular surface as well as the hemispherical emission of that with a diffuse surface are calculated. The influences of the optical thickness, sinusoidal refractive index distribution and linear temperature distribution on the thermal emission are investigated. The results show that the effects of refractive index and temperature distribution are significant and are different under the two reflecting modes of the surface.     

基于微面斜率法的粗糙表面半透明介质层光谱散射特性分析

对具有一维高斯分布粗糙表面的半透明介质层光谱散射,基于微面斜率法建立了考虑遮蔽效应的粗糙表面光谱辐射传递概率模型,采用蒙特卡罗法模拟光谱辐射能束在粗糙表面、半透明介质层介质与镜反射基底之间的多次反射、折射和吸收等传递过程。通过数值模拟,分析了介质层表面粗糙度、光谱光学厚度、折射率和基底反射率对介质层双向反射分布函数(BRDF)的影响。结果表明,表面粗糙程度不同时,反射峰值随入射角度呈现不同的变化趋势;表面粗糙度增加或折射率增大都将导致漫反射份额增大;介质层光谱光学厚度和基底反射率主要影响BRDF的数值大小,而对BRDF的分布形态影响很小。     

Temperature field of radiative equilibrium in a semitransparent slab with a linear refractive index and gray walls

The temperature field in a semitransparent slab of absorbing-emitting gray medium at radiative equilibrium is solved in this paper. The medium has a linear refractive index and the two boundaries are diffuse gray walls. A curved ray tracing technique is combined with a pseudo-source adding method to deduce the radiative intensities on the gray walls. And on the basis of the previous work done by Ben Abdallah and Le Dez, the discrete temperature field in the slab is deduced. The influences of refractive index distribution, boundary wall emissivities and optical thickness on the radiative equilibrium temperature field are examined. The results display the significant influences of the refractive index distribution and the boundary wall emissivities.     

Temperature field of radiative equilibrium in a two-dimensional graded index medium with gray boundaries

In this paper, a numerical method is presented for the study of the radiative transfer in a two-dimensional graded index semitransparent medium with diffuse gray boundaries. The numerical method is a combination of the linear refractive index bar model, the discrete curved ray-tracing technique and the pseudo source adding method (LRIB-CRTP). In the traditional ray-tracing technique, it is difficult to deal with the diffuse gray boundary while solving the radiative transfer. Using the pseudo source adding method, the diffuse gray boundary of the medium can be treated as a black boundary. We have also studied the radiative equilibrium temperature field of the medium and analyzed the influence of some parameters involved. The results show that the directional discrete number is important for the medium having a large absorption coefficient. The results also show that the refractive index distribution greatly influences the temperature field, whereas the linear absorption coefficient distribution has little influence on the temperature field.     

Thermal emission characteristics of a graded index semitransparent medium

This paper develops a numerical model for thermal radiative transfer in a two-dimensional semitransparent graded index medium. A piecewise continuous refractive index model, the linear refractive index bar model, is presented. This model is established based on three hypotheses, and has a higher precision than the bar model used previously. This paper also studies the thermal emission from a two-dimensional graded index medium, which is scattering or non-scattering. We find that it can present an obvious pattern of directional distribution at times. The refractive index distribution and absorption coefficient are the two main influential factors. This finding differs from the common belief that thermal sources, such as the incandescent filament of a light bulb, emit a quasi-isotropic light. The finding also suggests that there maybe other important applications of artificial GRIN materials.     

吸收-透射界面下正弦折射率介质内辐射换热

对具有吸收-透射性边界面的梯度折射率半透明介质层,建立了介质内热辐射传递与边界面辐射换热的数理模型,并采用数值弯曲光线跟踪法求解介质内的热辐射传递。通过数值模拟,分析了正弦折射率下,边界面的反射特性、吸收率以及介质层光学厚度对介质内热辐射平衡温度场及热流分布的影响。结果表明,边界面的反射特性与吸收率对介质内辐射换热均有重要影响,吸收率的影响与边界面反射特性、介质层光学厚度及环境条件相关,呈现特征不同的作用。     

Transient radiation and conduction heat transfer inside a plane-parallel participating gray medium with boundaries having different reflecting characteristics

A hybrid ray-tracing method is developed for the solution to the radiative transfer in a plane-parallel participating medium having one specular surface and another diffuse surface. By this method, radiative transfer coefficients (RTCs) for specular–diffuse (S–D) surfaces are deduced. The medium surfaces are considered to be semitransparent. The effects of convection–radiation parameter, conduction–radiation parameter and refractive index on transient coupled heat transfer are investigated. Results show that the temperature curves of the medium having S–D surfaces is higher than those of the medium having S–S surfaces (two specular surfaces); the total heat flux at steady state for the S–D surfaces is lower than that for the S–S surfaces.     

Anisotropic emission characteristics of semitransparent spherical particle with spherically asymmetric temperature distribution

The Monte Carlo ray-tracing method (MCRT) based on the concept of radiation distribution factor is extended to study the anisotropic emission characteristics of semitransparent spherical particle with spherically asymmetric temperature distribution. The dimensionless apparent spectral radiative intensity of particle emission is calculated by the radiation distribution factor. The effects of the related parameters on the dimensionless apparent spectral radiative intensity are analyzed and discussed. The results show that the anisotropy of particle emission increases with the spherically asymmetry of particle temperature, and the refractive index and the particle optical thickness strongly affect the anisotropic emission characteristics of semitransparent spherical particle with spherically asymmetric temperature distribution.     

Thermal analysis for transient radiative cooling of a conducting semitransparent layer of ceramic in high-temperature applications

A method is developed for obtaining transient temperature distribution in a cooling semitransparent layer of ceramic. The layer is emitting, absorbing, isotropically scattering and heat conducting with a refractive index ranging from 1 to 2. The solution involves solving simultaneously the energy equation and the integral equation for the radiative flux gradient. The energy equation is solved using an implicit finite volume scheme and the integral equation of radiative heat transfer is solved using the singularity technique and Gaussian integration. The effects of scattering are investigated. It is shown that scattering has a significant effect on the transient temperature distribution and the transient mean temperature of the layer.     

Transient coupled radiative and conductive heat transfer in a semitransparent layer of ceramic

This work considers transient radiative and conductive heat transfer in a semitransparent layer of ceramic, submitted to several thermal and radiative boundary conditions. Each side of the layer is exposed to hot or cold radiative surroundings, while each boundary is heated or cooled by convection. The solution procedure must provide accurate temperature distribution in the layer, so a nodal analysis based on Hottel's zonal method extended by ray tracing method is carried out. A finite difference method with non-uniform space and time increments is used to solve the transient energy equation, including a radiative heat source, coupled to a equation of radiative transfer. Variable spacing was used to concentrate grid points in regions with large temperature gradients. The influence of refractive index, optical thicknesses and conduction-radiation parameters is investigated.     

Effect of reflecting modes on combined heat transfer within an anisotropic scattering slab

Under various interface reflecting modes, different transient thermal responses will occur in the media. Combined radiative-conductive heat transfer is investigated within a participating, anisotropic scattering gray planar slab. The two interfaces of the slab are considered to be diffuse and semitransparent. Using the ray tracing method, an anisotropic scattering radiative transfer model for diffuse reflection at boundaries is set up, and with the help of direct radiative transfer coefficients, corresponding radiative transfer coefficients (RTCs) are deduced. RTCs are used to calculate the radiative source term in energy equation. Transient energy equation is solved by the full implicit control-volume method under the external radiative-convective boundary conditions. The influences of two reflecting modes including both specular reflection and diffuse reflection on transient temperature fields and steady heat flux are examined. According to numerical results obtained in this paper, it is found that there exits great difference in thermal behavior between slabs with diffuse interfaces and that with specular interfaces for slabs with big refractive index.     

带有多孔二氧化硅间隔层的导模共振光栅实现染料激光器发射增强

导模共振光栅是一种典型的平面波导共振结构,可在光栅表面或波导层内形成较强的局域电场,能增强光与物质的相互作用.本文在导模共振结构的光栅层和基底层之间,引入低折射率的多孔二氧化硅间隔层,显著增强了局域电场与增益介质的接触度.结果表明,引入多孔二氧化硅后,共振产生的电场增强区域上移至激光染料层,增加了激光染料与电场的相互作用,实现了激光出射增强.本文基于时域有限差分法,对结构参数进行分析优化,研究了820 nm共振波长激发下的出射激光特性,得到了连续的激光出射,其能量阈值约为2.5 mJ/cm^2,线宽约为0.3 nm.本文提出的结构实现了对表面局域电场的有效调控,增强了激发光与增益介质的相互作用,不但可应用于激光器,还为其它发光器件的设计提供了参考.     

Discrete curved ray-tracing method for radiative transfer in an absorbing-emitting semitransparent slab with variable spatial refractive index

A discrete curved ray-tracing method is developed to analyze the radiative transfer in one-dimensional absorbing-emitting semitransparent slab with variable spatial refractive index. The curved ray trajectory is locally treated as straight line and the complicated and time-consuming computation of ray trajectory is cut down. A problem of radiative equilibrium with linear variable spatial refractive index is taken as an example to examine the accuracy of the proposed method. The temperature distributions are determined by the proposed method and compared with the data in references, which are obtained by other different methods. The results show that the discrete curved ray-tracing method has a good accuracy in solving the radiative transfer in one-dimensional semitransparent slab with variable spatial refractive index.     

Internal distribution of radiation absorption in a semitransparent spherical particle

The internal distribution of spectral radiation absorption in a semitransparent spherical particle irradiated uniformly and isotropically is determined by the ray tracing method, and the detailed computation formulae for the internal spectral radiation absorption are deduced. The computed results show that the peak of internal volumetric spectral radiation absorption may locate at the interior shell of the particle. The dimensionless volumetric spectral radiation absorption is higher near the center for weakly absorbing or small spheres, but the dimensionless volumetric spectral radiation absorption is higher near the surface for strongly absorbing or large spheres. The corresponding physical interpretations of the internal spectral absorption distribution are given.     

ZnSe－ZnS量子阱的光学非线性

半导体量子阱及超晶格材料具有室温激子效应以及强的光学非线性从而得到人们广泛的重视。利用半导体量子阱和超晶格可以制备出高速度、低闭值、小尺寸及室温工作的半导体激光器、光双稳器件等一系列光电子器件.     

Control of the distribution of surface plasmon local field by altering the surrounding material

The field distribution of the surface plasmon (SP) around a silver nanowire greatly influences its applications for both spectrum enhancement and nano-waveguide. This paper demonstrates the change of the SP local field distribution of a silver nanowire on glass substrate with the refractive index of the covering medium by numerical simulation. The hot energy site is observed focusing on the interface between the nanowire and the surround material of larger refractive index. Moreover, we also find that the surface plasmon field becomes more confined as the refractive index between the substrate and medium has a larger gap, while a homogeneous distribution of the surrounding dielectric material around the nanowire shows a uniform local field distribution with a larger surface plasmon propagation length. The change of related parameters, such as effective index, mode area, and propagation length are also comprehensively investigated against the refractive index for nanowires with 100, 200, 300 nm diameter. Considering the wide use of polymethyl methacrylate (PMMA) material, the field distribution of silver nanowire partially imbedded in PMMA against the PMMA thickness is also studied.     

Monte Carlo discrete curved ray-tracing method for radiative transfer in an absorbing-emitting semitransparent slab with variable spatial refractive index

A Monte Carlo discrete curved ray-tracing method is developed to analyze the radiative transfer in one-dimensional absorbing-emitting semitransparent slab with variable spatial refractive index, in which the Monte Carlo method is combined with the discrete curved ray-tracing method. A problem of radiative equilibrium with linear variable spatial refractive index is taken as an example to examine the accuracy of the proposed method. The temperature distributions and the dimensionless radiative heat flux are determined by the proposed method and compared with the data in references, which are obtained by other different methods. The results show that the Monte Carlo discrete curved ray-tracing method has a good accuracy in solving the radiative transfer in one-dimensional semitransparent slab with variable spatial refractive index.     

Effects of polarization on radiation absorption in one-dimensional semitransparent slab exposed to collimated irradiation

The internal distribution of radiative absorption in one-dimensional semitransparent slab exposed to collimated irradiation is determined by the ray tracing method, and the detailed computation formulae for the distribution of radiative absorption are deduced. It is found that the ray will be polarized by specular reflection of slab boundaries even if the collimated irradiation is unpolarized, and the extent of polarization increases with the internal reflection times. The effects of polarization on the radiative absorption are analyzed and the radiative absorption distributions are compared with those obtained from the case in which the effects of polarization are omitted. The results show that the large differences between reflectances of perpendicular and parallel polarized components are the main causes resulting in errors of radiative absorption distribution. The polarization of incident beam has significant influences on the radiative absorption. Even for an unpolarized beam irradiated near Brewster's angle, omitting the effects of polarization will result in large errors, and the errors increase with the refractive index.     

A method of precise determination of the optical constants of uniaxial crystals from the compensator parameters

A method of determination of the refractive indices of uniaxial crystals from the compensator parameters is proposed. In this case, the accuracy is limited by the temperature fluctuations inside a crystal. The orientation of the optical axis with respect to the surface and the thickness and the thermal expansion coefficient of the crystal can be determined additionally. This method can be used for precise determination of the refractive indices and absorption coefficients of biaxial crystals. Experimental results of determination of the temperature coefficients of the refractive indices and of linear expansion for a plane-parallel plate cut from artificial crystalline quartz parallel to the optical axis are presented.