Thermal emission and volumetric absorption of a graded index semitransparent medium layer

Both thermal emission and volumetric absorption characteristics of a graded index semitransparent medium layer are investigated numerically. The semitransparent and specular emerging surface of the medium layer is parallel to an opaque and diffuse substrate wall. Monochromatic spectrum or gray medium is considered in the analysis. A pseudo-source adding method is combined with a ray-splitting and -tracing technique to solve the radiative transfer in the medium. As examples, constant and linear refractive index distributions are examined for an isothermal layer and the medium layer with a linear temperature distribution. Directional and hemispherical thermal emissions from the emerging surface as well as the volumetric absorption to the diffuse and parallel incidence of radiation are investigated, respectively. The results show that the refractive index distribution has significant influences on thermal emission and volumetric absorption of a semitransparent medium layer. The optical thickness, temperature distribution and the reflectivity of substrate wall react in combination with the refractive index distribution.     

Temperature field of radiative equilibrium in a semitransparent slab with a linear refractive index and gray walls

The temperature field in a semitransparent slab of absorbing-emitting gray medium at radiative equilibrium is solved in this paper. The medium has a linear refractive index and the two boundaries are diffuse gray walls. A curved ray tracing technique is combined with a pseudo-source adding method to deduce the radiative intensities on the gray walls. And on the basis of the previous work done by Ben Abdallah and Le Dez, the discrete temperature field in the slab is deduced. The influences of refractive index distribution, boundary wall emissivities and optical thickness on the radiative equilibrium temperature field are examined. The results display the significant influences of the refractive index distribution and the boundary wall emissivities.     

Temperature field of radiative equilibrium in a two-dimensional graded index medium with gray boundaries

In this paper, a numerical method is presented for the study of the radiative transfer in a two-dimensional graded index semitransparent medium with diffuse gray boundaries. The numerical method is a combination of the linear refractive index bar model, the discrete curved ray-tracing technique and the pseudo source adding method (LRIB-CRTP). In the traditional ray-tracing technique, it is difficult to deal with the diffuse gray boundary while solving the radiative transfer. Using the pseudo source adding method, the diffuse gray boundary of the medium can be treated as a black boundary. We have also studied the radiative equilibrium temperature field of the medium and analyzed the influence of some parameters involved. The results show that the directional discrete number is important for the medium having a large absorption coefficient. The results also show that the refractive index distribution greatly influences the temperature field, whereas the linear absorption coefficient distribution has little influence on the temperature field.     

吸收-透射界面下正弦折射率介质内辐射换热

对具有吸收-透射性边界面的梯度折射率半透明介质层,建立了介质内热辐射传递与边界面辐射换热的数理模型,并采用数值弯曲光线跟踪法求解介质内的热辐射传递。通过数值模拟,分析了正弦折射率下,边界面的反射特性、吸收率以及介质层光学厚度对介质内热辐射平衡温度场及热流分布的影响。结果表明,边界面的反射特性与吸收率对介质内辐射换热均有重要影响,吸收率的影响与边界面反射特性、介质层光学厚度及环境条件相关,呈现特征不同的作用。     

Transient radiation and conduction heat transfer inside a plane-parallel participating gray medium with boundaries having different reflecting characteristics

A hybrid ray-tracing method is developed for the solution to the radiative transfer in a plane-parallel participating medium having one specular surface and another diffuse surface. By this method, radiative transfer coefficients (RTCs) for specular–diffuse (S–D) surfaces are deduced. The medium surfaces are considered to be semitransparent. The effects of convection–radiation parameter, conduction–radiation parameter and refractive index on transient coupled heat transfer are investigated. Results show that the temperature curves of the medium having S–D surfaces is higher than those of the medium having S–S surfaces (two specular surfaces); the total heat flux at steady state for the S–D surfaces is lower than that for the S–S surfaces.     

Effect of reflecting modes on combined heat transfer within an anisotropic scattering slab

Under various interface reflecting modes, different transient thermal responses will occur in the media. Combined radiative-conductive heat transfer is investigated within a participating, anisotropic scattering gray planar slab. The two interfaces of the slab are considered to be diffuse and semitransparent. Using the ray tracing method, an anisotropic scattering radiative transfer model for diffuse reflection at boundaries is set up, and with the help of direct radiative transfer coefficients, corresponding radiative transfer coefficients (RTCs) are deduced. RTCs are used to calculate the radiative source term in energy equation. Transient energy equation is solved by the full implicit control-volume method under the external radiative-convective boundary conditions. The influences of two reflecting modes including both specular reflection and diffuse reflection on transient temperature fields and steady heat flux are examined. According to numerical results obtained in this paper, it is found that there exits great difference in thermal behavior between slabs with diffuse interfaces and that with specular interfaces for slabs with big refractive index.     

Thermal emission characteristics of a graded index semitransparent medium

This paper develops a numerical model for thermal radiative transfer in a two-dimensional semitransparent graded index medium. A piecewise continuous refractive index model, the linear refractive index bar model, is presented. This model is established based on three hypotheses, and has a higher precision than the bar model used previously. This paper also studies the thermal emission from a two-dimensional graded index medium, which is scattering or non-scattering. We find that it can present an obvious pattern of directional distribution at times. The refractive index distribution and absorption coefficient are the two main influential factors. This finding differs from the common belief that thermal sources, such as the incandescent filament of a light bulb, emit a quasi-isotropic light. The finding also suggests that there maybe other important applications of artificial GRIN materials.     

Anisotropic emission characteristics of semitransparent spherical particle with spherically asymmetric temperature distribution

The Monte Carlo ray-tracing method (MCRT) based on the concept of radiation distribution factor is extended to study the anisotropic emission characteristics of semitransparent spherical particle with spherically asymmetric temperature distribution. The dimensionless apparent spectral radiative intensity of particle emission is calculated by the radiation distribution factor. The effects of the related parameters on the dimensionless apparent spectral radiative intensity are analyzed and discussed. The results show that the anisotropy of particle emission increases with the spherically asymmetry of particle temperature, and the refractive index and the particle optical thickness strongly affect the anisotropic emission characteristics of semitransparent spherical particle with spherically asymmetric temperature distribution.     

Transient coupled radiative and conductive heat transfer in a semitransparent layer of ceramic

This work considers transient radiative and conductive heat transfer in a semitransparent layer of ceramic, submitted to several thermal and radiative boundary conditions. Each side of the layer is exposed to hot or cold radiative surroundings, while each boundary is heated or cooled by convection. The solution procedure must provide accurate temperature distribution in the layer, so a nodal analysis based on Hottel's zonal method extended by ray tracing method is carried out. A finite difference method with non-uniform space and time increments is used to solve the transient energy equation, including a radiative heat source, coupled to a equation of radiative transfer. Variable spacing was used to concentrate grid points in regions with large temperature gradients. The influence of refractive index, optical thicknesses and conduction-radiation parameters is investigated.     

基于微面斜率法的粗糙表面半透明介质层光谱散射特性分析

对具有一维高斯分布粗糙表面的半透明介质层光谱散射,基于微面斜率法建立了考虑遮蔽效应的粗糙表面光谱辐射传递概率模型,采用蒙特卡罗法模拟光谱辐射能束在粗糙表面、半透明介质层介质与镜反射基底之间的多次反射、折射和吸收等传递过程。通过数值模拟,分析了介质层表面粗糙度、光谱光学厚度、折射率和基底反射率对介质层双向反射分布函数(BRDF)的影响。结果表明,表面粗糙程度不同时,反射峰值随入射角度呈现不同的变化趋势;表面粗糙度增加或折射率增大都将导致漫反射份额增大;介质层光谱光学厚度和基底反射率主要影响BRDF的数值大小,而对BRDF的分布形态影响很小。     

The DRESOR method for radiative heat transfer in a one-dimensional medium with variable refractive index

This paper extends the DRESOR (Distribution of Ratios of Energy Scattered by the medium Or Reflected by the boundary surface) method to radiative transfer in a variable refractive index medium. In this method, the intensity is obtained from the source term along the curved integration paths determined only by the variable refractive index, and the DRESOR values are calculated by the Monte Carlo method in which the propagation of the energy bundles are affected by Snell's law. With given temperatures on the black boundaries of a one-dimensional medium, the temperature distribution inside the medium with a variable scattering property is calculated under the condition of radiative equilibrium. It is shown that the DRESOR method has a good accuracy in the cases studied. For an isotropic-scattering medium with the same optical thickness, the scattering albedo has no effect on the temperature distribution, which can be obtained from the general equations and can be seen as an extension of what exists for a constant refractive index; however, the different refractive index causes obvious changes in the temperatures inside the medium. The effect of anisotropic scattering on the temperature distribution cannot be ignored, although it is still weaker than the effect caused by variation in the refractive index.     

Thermal analysis for transient radiative cooling of a conducting semitransparent layer of ceramic in high-temperature applications

A method is developed for obtaining transient temperature distribution in a cooling semitransparent layer of ceramic. The layer is emitting, absorbing, isotropically scattering and heat conducting with a refractive index ranging from 1 to 2. The solution involves solving simultaneously the energy equation and the integral equation for the radiative flux gradient. The energy equation is solved using an implicit finite volume scheme and the integral equation of radiative heat transfer is solved using the singularity technique and Gaussian integration. The effects of scattering are investigated. It is shown that scattering has a significant effect on the transient temperature distribution and the transient mean temperature of the layer.     

Monte Carlo discrete curved ray-tracing method for radiative transfer in an absorbing-emitting semitransparent slab with variable spatial refractive index

A Monte Carlo discrete curved ray-tracing method is developed to analyze the radiative transfer in one-dimensional absorbing-emitting semitransparent slab with variable spatial refractive index, in which the Monte Carlo method is combined with the discrete curved ray-tracing method. A problem of radiative equilibrium with linear variable spatial refractive index is taken as an example to examine the accuracy of the proposed method. The temperature distributions and the dimensionless radiative heat flux are determined by the proposed method and compared with the data in references, which are obtained by other different methods. The results show that the Monte Carlo discrete curved ray-tracing method has a good accuracy in solving the radiative transfer in one-dimensional semitransparent slab with variable spatial refractive index.     

Discrete curved ray-tracing method for radiative transfer in an absorbing-emitting semitransparent slab with variable spatial refractive index

A discrete curved ray-tracing method is developed to analyze the radiative transfer in one-dimensional absorbing-emitting semitransparent slab with variable spatial refractive index. The curved ray trajectory is locally treated as straight line and the complicated and time-consuming computation of ray trajectory is cut down. A problem of radiative equilibrium with linear variable spatial refractive index is taken as an example to examine the accuracy of the proposed method. The temperature distributions are determined by the proposed method and compared with the data in references, which are obtained by other different methods. The results show that the discrete curved ray-tracing method has a good accuracy in solving the radiative transfer in one-dimensional semitransparent slab with variable spatial refractive index.     

Radiation transport and internal reflection in a two region, turbid sphere

We construct an integral equation for the flux intensity in a scattering and absorbing two-region turbid spherical medium using the integro-differential form of the radiative transfer equation. The sphere is uniformly irradiated by an external source of arbitrary angular distribution and contains a distributed volume source. Anisotropic scattering is accounted for by the transport approximation. The Fresnel boundary conditions, which incorporate reflection and refraction, are used at the outer surface and at the interface between the two regions. In this respect, some new interfacial boundary conditions are introduced. For the special case of a non-scattering medium, we obtain exact solutions for specular reflection. Some numerical examples are given which show qualitative agreement with some recent work of other authors. Of particular interest are the emergent angular distribution and the albedo of the surface as a function of the refractive index and the radii of the two regions. We also draw attention to the fact that the boundary conditions at the interface differ according to the relative values of the refractive indices in the two regions. The interfacial boundary conditions for use in diffusion theory are derived and compared with those of Aronson [Boundary conditions for diffusion of light. J opt Soc Am 1995;12:2532]. In appendix B, we show how diffusion theory may be used to include scattering into the problem in a simple way.     

瞬态激光脉冲在吸收、发射性介质内引起的温度响应

本文导出了平行光入射辐射穿过半透明界面,在吸收、发射性介质内产生的辐射热源的表达式。数值模拟了瞬间激光脉冲入射下：（1）半透明介质与不透明介质在非人射面上的过余温度响应;（2）入的激光的波长对温度响应的影响;（3）界面光学特性（两侧均为不透明界面,两侧均为半透明界面,一侧为半透明、另一侧为不透明界面）对温度响应的影响;（4）采用Planck、Rosseland平均吸收系数处理非灰介质时,对辐射与导热瞬态耦合换热的影响。     

Two analytic methods applied to radiative transfer in the linear-anisotropic scattering medium with graded index and diffuse gray boundaries

The curved ray-tracing method is extended to radiative transfer in the graded index medium with diffuse gray boundary conditions instead of black boundary conditions and the pseudo-source adding method is extended to the case of the linear-anisotropic scattering medium with graded index from non-scattering medium. Furthermore, the equivalence of the two methods is verified by formulation derivation. As exact analytical solutions, both the methods have high accuracy and fast computational speed. The predicted temperature distributions and dimensionless radiative heat flux at radiative equilibrium are determined by the proposed methods, and the numerical results are compared with the data in references. The results show that the present methods have a good accuracy. Influences of various combinations of refractive index and boundary emissivities on the temperature distributions and dimensionless radiative heat flux are also investigated.     

Discontinuous finite element method for radiative heat transfer in semitransparent graded index medium

To avoid the complicated and time-consuming computation of curved ray trajectories, a discontinuous finite element method based on discrete ordinate equation is extended to solve the radiative transfer problem in a multi-dimensional semitransparent graded index medium. Two cases of radiative heat transfer in two-dimensional rectangular gray semitransparent graded index medium enclosed by opaque boundary are examined to verify this discontinuous finite element method. Special layered and radial graded index distributions are considered. The predicted dimensionless net radiative heat fluxes and dimensionless temperature distributions are determined by the discontinuous finite element method and compared with the results obtained by the curved Monte Carlo method in references. The results show that the discontinuous finite element method has a good accuracy in solving the multi-dimensional radiative transfer problem in a semitransparent graded index medium.     

Discrete ordinates method for propagation of light in highly scattering vascular tissues

This work considers the propagation of light in a semitransparent layer of vascular tissue, submitted to radiative boundary conditions. The solution procedure must provide accurate light distribution in the layer, so a discrete ordinates method based on the exact transport theory is carried out. An advantage of this method is its ability to account easily for various boundary conditions as well as optical heterogeneity. The influences of anisotropic scattering, optical discontinuity, optical parameters of tissue and refractive index on radiant fluence rate are investigated carefully. It is shown that reflections tend to produce more uniform profiles within the tissue.