Different shape models for erythrocyte: Light scattering analysis based on the discrete sources method

In practical applications a precise and fast detection of the shape of a single erythrocyte from its scattering characteristics is needed. For this reason detailed investigations of light scattering properties of erythrocyte and their relation to shape is of great interest in recent years. In this paper we analyze light scattering behavior of different shape models of erythrocyte using the discrete sources method. For this we compare scattering results for oblate spheroid, disk-sphere, Cassini-based shape and a shape for a real strainless erythrocyte introduced by Skalak. Numerical results for the scattering indicatrix and the differential cross section by different shape models and its orientations are presented.     

基于球扩展光源模型的物体三维形状的恢复

计算机视觉中传统的物体三维形状恢复方法大都基于光源是无穷远点光源的假设，如由单幅图像恢复三维形状（ｓｈａｐｅｆｒｏｍｓｈａｄｉｎｇ）光度立体视觉（ｐｈｏｔｏｍｅｔｒｉｃｓｔｅｒｅｏ）方法等。实际环境中的光源往往不能满足这个假设，因此大大限制了这些方法的应用，本文提出了一种更加实用的球扩光源模型，并推导出此光源下反射物体表面的反射图，此模型在三维坐标系中描述了球光源位置，亮度，漫反射物体表面反射度与     

结构光三维物体面形实时测量系统

本文基于结构光投影方法提出了一种新的三维物体面形重建方法,并建立了三维物体面形实时测量系统,系统用硬件电路实现结构光峰值提取,然后由软件对畸变光条峰值分布进行总体面形拟合处理。处理中,可以获得物体在视场内附加了一个倾斜面的三维物体面形分布。物体实际面形可以通过减去这个附加倾斜面而获得。     

球面玻璃铣磨加工的面形误差分析

本文根据空间啮合理论,求解出计算面形误差的方程。应用此方程,不仅能定量的算出面形误差、确定面形误差最大值的位置,而且还能控制面形误差的大小和位置。     

集成成像大纵深物体的三维形貌获取技术

为了满足现代工业所需的大纵深物体的三维形貌获取需求,解决传统结构光三维形貌获取技术纵深较小的问题, 借助集成成像这种阵列式多视点获取技术,构建了基于集成成像的大纵深物体的三维形貌获取技术。从集成成像原理出发,分析了集成成像三维物点和同名像点之间的关系,得到集成成像光学获取系统参数和三维物体纵深极限之间的关系。在此基础上,利用相机和电动平移台构建了扫描式相机集成成像三维形貌获取系统,并对纵深从600 mm到3 600 mm相对独立的2个物体构建的大纵深三维物体进行了形貌获取。光学实验结果显示,该集成成像大纵深物体三维形貌获取技术能够单次获取纵深为3 600 mm的三维物体的三维形貌,为大纵深物体的三维形貌获取提供了技术支持。     

Signature inversion caused by triaxiality and unpaired band crossings in 72Br

High-spin states in 72Br were studied with the EUROBALL III spectrometer using the 40Ca(40Ca,alpha3p1n) reaction. The negative-parity band observed in this experiment displays a signature inversion around spin I = 16. The interpretation within the cranked Nilsson-Strutinsky approach shows that this signature pattern is a signal of a substantial triaxial shape change with increasing spin where the nucleus evolves from a triaxial shape with rotation about the intermediate axis at low spin through a collective prolate shape to a triaxial shape but with rotation about the shortest principal axis at high spin.     

Shape invariant potentials in higher dimensions

In this paper we investigate the shape invariance property of a potential in one dimension. We show that a simple ansatz allows us to reconstruct all the known shape invariant potentials in one dimension. This ansatz can be easily extended to arrive at a large class of new shape invariant potentials in arbitrary dimensions. A reformulation of the shape invariance property and possible generalizations are proposed. These may lead to an important extension of the shape invariance property to Hamiltonians that are related to standard potential problems via space time transformations, which are found useful in path integral formulation of quantum mechanics.     

双布里渊放大池放大控制脉冲波形的研究

提出一种主放大池与修整放大池相结合的双布里渊放大池放大控制脉冲波形的新方法.在主放大池中，通过调节抽运光与种子光的延迟时间，完成对脉冲波形的整体控制；而在修整放大池中，通过调节双池间距，完成对脉冲波形、尤其是对脉冲前沿的微调.实验研究了双池间距对脉冲波形的影响，得到脉冲波形随双池间距的变化规律.结果表明：相遇时间及双池间距是控制脉冲波形最重要的参数.此双布里渊放大池系统可以方便地控制脉冲波形，尤其可以微调脉冲前沿. 关键词： 受激布里渊散射 布里渊放大 脉冲波形控制     

Accurate object detection with a discriminative shape model

Discriminative model over bag-of-visual-words representation significantly improves the accuracy of object detection under clutter. However, it encounters bottleneck because of completely ignoring geometric constraint between features. On the contrary, to detect object accurately explicit shape model heavily relies on geometric information of the object, which as a result lacks of discriminative power. In this paper, we present a discriminative shape model to make use of the advantages of the two models based on the insight that the two models are essentially complementary. Discriminative model provides discriminative power, while shape model encodes geometry. The cost function that we used to distinguish objects considers both the detection maps of the discriminative model and the result of shape matching. In this cost function, we adopt a novel way to deal with multi-scale detection maps. We show that this cost function has very strong discriminative power, which makes learning a discriminative threshold for full object detection possible. For shape model, we also present a scheme for learning a good shape model from noisy images. Experiments on UIUC Car and Weizmann–Shotton horses show state-of-the-art performance of our model.     

1.3GHz单cell高梯度低损耗超导腔设计研究

计划中的国际直线对撞机(简称 ILC), 已确定采用低温超导技术. 研究表明, ILC的整体造价与超导腔的加速梯度密切相关, 因此新型高梯度超导腔的研制, 已成为目前ILC的热门课题. 目前超导腔加速梯度的提高受限于超导体射频临界磁场(H_c^rf), 希望通过腔形的优化设计, 来减小超导腔表面峰值磁场与加速梯度的比值(H_p/E_acc), 进而提高超导腔的加速梯度, 以满足ILC的要求. 目前, 具有代表性的高梯度超导腔新腔形有两种, 即低损耗超导腔(LLSCC)和重入式超导腔(RESCC). LLSCC相对于RESCC而言, 具有较低的H_p/E_acc, 因此在理论上LLSCC更易于达到较高的梯度. 作者对1.3GHz单cell高梯度低损耗超导腔的腔形进行了详细的研究, 给出了相应低损耗超导腔腔形, 并对这一设计结果进行了分析比较.     

A molecular dynamics investigation of the deformation mechanism and shape memory effect of epoxy shape memory polymers

Following deformation, thermally induced shape memory polymers(SMPs) have the ability to recover their original shape with a change in temperature. In this work, the thermomechanical properties and shape memory behaviors of three types of epoxy SMPs with varying curing agent contents were investigated using a molecular dynamics(MD) method. The mechanical properties under uniaxial tension at different temperatures were obtained, and the simulation results compared reasonably with experimental data. In addition, in a thermomechanical cycle, ideal shape memory effects for the three types of SMPs were revealed through the shape frozen and shape recovery responses at low and high temperatures, respectively, indicating that the recovery time is strongly influenced by the ratio of E-51 to 4,4'-Methylenedianiline.     

光电扫描植物根形状几何测量方法

植物根形状几何测量在植物生长研究方面起着重要的作用。但植物根的形状很不规则，对其形状的几何测量对植物研究工作者来说，一直是一件十分困难的工作，特别是根吸收表面积的测量。本文采用通用光电扫描仪，将植物根的形状转化成数字图像，应用数字图像处理技术对数字化的植物根图像进行分析，提出一种边缘点去除与内点保留相结合的“三步细化方法”，在细化基础上采用链码法进行长度测量；采用圆柱逼近模型对植物根的表面积进行测量；用对比法对测量方法的结果作了比较。本文的方法具有应用价值。除植物根外，本文方法也适用于类似根形状物体的几何测量。     

Calculation of the shape of the magnetic domain wall

The equilibrium shape of the bowing of the magnetic domain wall, for an applied magnetic field and within the bulged domain wall Globus model, is obtained. We make the assumption of having a bowing corresponding to a volume of revolution and use calculus of variations to minimize the total energy with respect to the profile of the shape. It is found that the equilibrium shape corresponds to a spherical cap, in agreement with the assumption made for this shape in previous work.     

Reaction-limited sintering in nearly saturated environments

We study the shape and growth rate of necks between sintered spheres with dissolution–precipitation dynamics in the reaction-limited regime. We determine the critical shape that separates those initial neck shapes that can sinter from those that necessarily dissolve, as well as the asymptotic evolving shape of sinters far from the critical shape. We compare our results with past results for the asymptotic neck shape in closely related but more complicated models of surface dynamics; in particular, we confirm a scaling conjecture, originally due to Kuczinsky. Finally, we consider the relevance of this problem to the diagenesis of sedimentary rocks and other applications.     

基于椭圆形光强分布光栅投影的三维面形测量方法

基于椭圆形光强分布光栅投影测量物体三维面形的方法,将椭圆形光强分布光栅投影到被测物体表面,用摄像机获取变形条纹图,通过系统参量和条纹图携带的相位信息求解出物体的三维面形.推导出通过椭圆形光强分布光栅条纹求解相位的计算公式并对提出方法作了计算机仿真.实验结果表明该方法可以比较准确地测量物体的三维面形,在噪音较大的情况下测量结果仍具有较高准确度.     

Optimal shape design of iron pole section of electromagnet

In this Letter, the classical problem of determining the optimal shape of the pole of an electromagnet is considered. In order to determine the optimal shape, we have extended a measure theory-based method. The problem of finding the optimal shape is reduced to one consisting of minimizing a linear form over a set of positive measures. To do so, an embedding procedure is applied. The resulting problem can be approximated by a finite-dimensional linear programming problem. The solution of the problem is used to construct a nearly optimal shape.     

一种稳健的柔性阵波束形成方法

由于航向、航速的改变以及水流、风浪等因素的影响,柔性线列阵在实际应用过程中阵型畸变是不可避免的。一方面,这种畸变使得许多假设阵型无畸变的波束形成方法的性能受到严重的影响;另一方面,目前很多的阵型估计方法仍不是很成熟,很难准确估计阵元的实际位置。本文提出将柔性阵列分为一段阵元位置已知的子阵和若干段阵元未知的子阵,利用不同子阵接收信号的互相关即可获得所需要的波束形成加权系数,从而在不需要知道阵元确切位置信息的情况下实现目标方法的估计。     

基于椭圆形光强分布光栅投影的三维面形测量方法

基于椭圆形光强分布光栅投影测量物体三维面形的方法,将椭圆形光强分布光栅投影到被测物体表面,用摄像机获取变形条纹图,通过系统参量和条纹图携带的相位信息求解出物体的三维面形.推导出通过椭圆形光强分布光栅条纹求解相位的计算公式并对提出方法作了计算机仿真.实验结果表明该方法可以比较准确地测量物体的三维面形,在噪音较大的情况下测量结果仍具有较高准确度.