带肋横流进气方式下的圆柱形孔气膜冷却特性

采用可进行全表面测量的瞬态液晶传热测量技术,实验研究了带肋横流进气方式下,不同横流雷诺数(Re_c=100000,50000)和吹风比(M=0.5,1,2)对圆柱形孔气膜冷却效率和换热系数比的影响,结果表明:受横流进气方式的影响,气膜冷却效率和换热系数的空间分布都呈现出一定的不对称性;相同吹风比下,横流雷诺数越高,冷却效率越高,而且在大吹风比下,这种影响更为显著;相同横流雷诺数下,换热系数比均随吹风比的增大而增大,气膜冷却效率则是随着吹风比增大先升高后降低;在大吹风比、低横流雷诺数工况下,气膜孔出口和孔间会形成强换热区。     

前缘突脊倾斜气膜冷却效果的实验

为了研究前缘突脊结构对气膜冷却的影响规律,设计了3种不同堵塞比的突脊模型,研究了气膜冷却效率随吹风比、堵塞比的变化规律.研究结果表明,与典型的圆柱型气膜孔相比,前缘突脊的存在大大提高了气膜冷却效率;前缘突脊在大吹风比下的作用更加明显;研究范围内存在最佳堵塞比.     

新型反对称涡气膜冷却结构设计及其数值研究

针对中.高吹风比下容易产生反向涡对的问题,为了改善中、高吹风比下气膜孔的冷却效率,进行了新型抗涡气膜孔的设计和研发工作.根据造型参数不同,设计了四种新型反对称涡气膜孔结构,首先研究了不同几何结构的新型气膜冷却孔对平板气膜冷却特性的影响.然后将反对称涡新型气膜冷却结构运用于叶栅端壁,前缘冷却孔排采用了不同冷却结构的单,双...     

横流下前向与反向复合角沟槽孔气膜冷却效率

利用红外热像技术实验分析了横流比(Cr=0.08,0.16)和吹风比(BR=0.5,1.0,2.0)对横向沟槽内反向和前向复合角气膜孔的气膜覆盖特性的影响。数据对比指出:沟槽、复合角度和反向冷气出流对于前向简单孔所发生的射流分离现象存在明显的抑制作用,有利于提高气膜覆盖。复合角度在大腔进气(Cr=0)时会引起冷却效率偏转,而横流进气可以有效抑制冷却效率的偏转,使得气膜在横流方向分布更加均匀。在相同横流比时,小吹风比导致反向孔的整体气膜覆盖优于前向孔,大吹风比下情况相反。小横流比时,120°沟槽孔在各吹风比呈现出最好的气膜覆盖,较简单角孔而言,效率提高约42%;大横流比时,60°沟槽孔在各吹风比呈现出最好的气膜覆盖,效率提高约26%。     

涡轮动叶吸力侧单排气膜孔冷却性能研究

本文通过数值模拟的方法,针对涡轮叶片吸力侧的单排气膜孔,研究了无量纲气膜孔出流位置、气膜孔复合角度和冷却空气质量流量占比对其气膜冷却效率与气动掺混损失的影响。结果表明,对于近前缘气膜孔,0.5%的冷却空气质量流量可以在保证较好的气动效率的同时在下游附近提供较高的绝热气膜冷却效率;对于中后部气膜孔,90°的气膜孔导致的掺混损失比相同冷气量的近前缘气膜孔高出一倍,此时复合角为60°的气膜孔有更好的气膜冷却效果。对比不同的孔排位置,位于流向位置0.3的气膜孔可以在下游较大区域取得良好的冷却效果,而且不引起过大的掺混损失。     

开槽前扩孔及复合角对气膜冷却的影响

本文对开槽前扩孔及在此基础上加30°、45°和60°不同角度复合角的气膜冷却结构进行了数值模拟,计算了指定冷却壁面的温度场分布以及冷却效率.结果表明:引入复合角后,能够改善冷却气膜在壁面的横向分布,复合角越大,气膜分布越均匀.在高吹风比下,复合角结构能够产生较大的气膜覆盖范围和较好的冷却效果.     

复合冲击和复合旋流冷却特性的对比研究

针对应用旋流冷却和气膜冷却对涡轮叶片前缘区进行冷却系统设计的科学命题,首次建立了包含冷气腔、冲击/旋流腔、气膜孔和燃气主流通道的复合冲击和复合旋流冷却模型,利用数值方法在相同几何和气动条件下对比了复合冲击和复合旋流冷却的流动换热特性.研究结果表明:冲击孔/旋流喷嘴流量沿X方向逐渐增大,吹风比沿X方向先增大后减小.复合冲击冷却的气膜孔流量和吹风比沿X方向略有增大,复合旋流冷却气膜孔流量和吹风比沿X方向减小.复合旋流冷却平均Nu比复合冲击冷却提升13.0%.气膜孔会扰动冷气流动,使附近小范围区域Nu提升.与复合冲击冷却相比,复合旋流冷却气膜孔的冷气流量和速度大,肾型对涡强度高,绝热气膜冷却效率减小.     

透平静叶叶身全覆盖气膜冷却有效度实验研究

燃气轮机透平叶片气膜冷却性能受到吹风比、曲率、压力梯度等多种因素的影响。本文采用压力敏感漆(PSP)技术研究了燃气轮机静叶气膜冷却的冷却性能,实验测量了不同吹风比下全覆盖气膜的冷却有效度,并结合单排孔冷却的实验结果进行分析。结果表明：随吹风比增大,压力面冷却有效度递增,吸力面受曲率和压力梯度影响,冷却有效度先递增后递减;前缘射流在低吹风比下附壁效果较好,高吹风比下由于复合角造成冷气向中叶展汇聚;通过对比单排冷却的叠加结果与全覆盖实验结果的误差,研究了Sellers叠加模型在叶栅条件下的适用性。     

射流注入角对平板气膜冷却特性影响的实验研究

本文对不同射流注入角的典型单排孔冷却结构的平板气膜冷却特性进行了实验研究,研究对象为轴线与主流来流方向分别成30°、60°、90°的射流孔板,对它们在吹风比为0.5、1.0、1.5条件下的射流孔下游的绝热气膜冷却效率分布特性进行了分析.在吹风比M=0.5时,三个射流注入角条件下近孔区域都能形成较好的冷气覆盖效果;M=1.0时,三者的下游横向平均冷却效率基本相同;M=1.5时,注入角60°的条件下冷却效果最好.     

冷却结构参数对气膜/冲击复合结构冷却性能的影响研究

采用气热耦合数值计算方法,研究了带有气膜/冲击复合冷却平板结构的冷却性能,分析了三种气膜孔结构(单排圆柱孔、双排圆柱孔和单排扇形孔)、不同冲击孔径、冲击距离对综合冷却效率、冲击壁面换热特性以及气膜流场结构的影响。计算结果表明,内部冲击冷却对综合冷却效率的影响程度因外部气膜冷却结构不同而不同;冲击孔径不同不仅会影响内部冲击冷却效果,同时也对外部气膜冷却的流场结构和冷却效率有所影响。     

Self-organization of five species in a cyclic competition game

Cyclic competition game models, particularly the “rock–paper–scissors” model, play important roles in exploring the problem of multi-species coexistence in spatially ecological systems. We propose an extended “rock–paper–scissors” game to model cyclic interactions among five species, and find that two of the five can coexistent when biodiversity disappears, which is different from the “rock–paper–scissors” game. As the number of fingers is five, we named the new model the “fingers” game, where the thumb, forefinger, middle finger, ring finger, and little finger cyclically dominate their subsequent species and are dominated by their former species. We investigate the “fingers” model in two ways: direct simulations and nonlinear partial differential equations. An important finding is that the number of species in a cyclic competition game has an influence on the emergence of biodiversity. To be specific, the “rock–paper–scissors” model is in favor of maintaining biodiversity in comparison with the “fingers” model when the variables (population size, reproduction rate, selection rate, and migration rate) are the same. It is also shown that the mobility and reproduction rate can promote or jeopardize biodiversity.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Experimental study on downstep in Chinese intonation

Downstep in pitch contour of Chinese Putonghua is examined using subtly designed sentences by controlling tone combinations. The results show both automatic and nonautomatic downstep phenomena exist in Chinese. In non-automatic downstep, low tones compress downwards the pitch range of the following syllables. and the main influence of downstep is on topline. Low tone not only lower the topline behind it, but also raise the high tones before it, the effects are compatible with each other. In automatic downstep, the topline of pitch contour in intonational phrase is presented as a linear downtrend, but it differs among speakers due to the effect of personal stress practice. In comparison with downstep phenomenon in other tone or non-tone languages, the downstep ratio in Chinese is not constant, and the domain of downstep is not limited within the adjacent tones.     

Abelian-Higgs phase of SU(2) QCD and glueball energy

It is shown that SU(2) QCD admits an dual Abelian-Higgs phase, with a Higgs vacuum of a type-Ⅱ superconductor. This is done by using a connection decomposition for the gluon field and the random-direction approximation. Using a bag picture with soft wall, we presented a calculational procedure for the glueball energy based on the recent proof for wall-vortices [Nucl. Phys. B 741(2006)1].     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Signal generation in an isotropic medium in scanning electron acoustic microscope

Based on the research in Ref. [5][Materials Science and Engineering, 1989; A122： 57 63], an improved model of heat source is set up, the different modes of Lamb wave in an isotropic sample generated by a chopped electron beam at frequency f are obtained with integral transform and normal function expansion method, and the output signal of PZT coupled at the back surface of the sample is found out. The generation mechanism of SEAM （Scanning Electron Acoustic Microscopy） signal is discussed. It shows that the SEAM is a near field imaging technique with high spatial resolution and its best lateral spatial resolution is about 2√2α （α is the radius of the focused electron beam）. Some of experimental results of SEAM images are presented in the paper and it shows that the spatial resolution of SEAM is better than 0.5 μm and smaller than the thermal diffusion length of the sample. Therefore the character of near field imaging in SEAM is also proved experimentally.     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.