Al,Fe, Mg掺杂Li2MnSiO4的电子结构和电化学性能的第一性原理研究

硅酸锰锂作为锂离子电池正极材料因具有高的理论电容量而一直备受关注, 但其较低的导电率和较差的循环性能阻碍了进一步的发展. 采用第一性原理广义梯度近似GGA+U的方法, 研究了Al, Fe, Mg掺杂Li₂MnSiO₄的电子结构、 脱嵌锂电压和导电性. 研究发现, Al 掺杂的Li₂Mn_0.5Al_0.5SiO₄结构中载流子的数目增加, 电子自旋向上和向下的态密度均穿过费米能级, 呈现金属特性, 提高了体系的导电率. 脱锂Li_xMnSiO₄ (x=1, 0)结构中, 通过计算一次脱锂相结构的形成能得到Al掺杂的一次脱锂结构最稳定, 并且Al掺杂的脱锂相结构体积变化小, 有利于材料循环性能的提高, 同时第一个锂离子脱嵌电压与未掺杂时(4.2 V)相比降低到2.7 V. Fe掺杂降低了Li₂MnSiO₄的带隙, 第一个锂离子脱嵌电压降低到3.7 V. 研究表明, Al的掺杂效果优于Fe和Mg, 更利于硅酸锰锂电化学性质的提高.     

LixNayCoO2的制备和热电性质

用固相反应方法，成功地合成了具有交互生长结构的Li_xNa_yCoO₂单相多晶系列样品. 热电势测量表明，该系统的室温热电势比Na_xCoO₂体系约高出60μV/K. 基于空穴载流子具有O2p特征，提出Li_xNa_yCoO₂中额外的热电势来源于氧空穴的占位熵. 关键词： xNa_yCoO₂')" href="#">Li_xNa_yCoO₂ 热电势 热电材料     

插层化合物LixTiS2中Li离子-空位二维有序结构稳定性的第一性原理研究

根据局域密度近似下的密度泛函理论，用第一性原理方法对TiS₂，LiTiS₂和Li_xTiS₂(x=1/4, 1/3, 1/2, 2/3, 3/4)有序系统进行了几何优化和总能量计算.将计算结果与已有的实验和理论结果进行了对比，得到的归一化结构参量增量Δa₀和Δc₀随离子浓度单调地增加，与实验结果符合较好.Li_{关键词： x}TiS₂')" href="#">Li_xTiS₂ 有序结构 第一性原理计算 密度泛函理论     

阶梯化对快离子导体LixTiS2的结构与能量性质的影响

根据密度波理论建立了stage-2有序Li_xTiS₂(x=1/8,1/6,1/4,1/3,3/8,1/2)系统的晶胞模型.采用平面波赝势方法,对stage-2有序系统和stage-1有序Li_xTiS₂(x=0,1/4,1/3,1/2,2/3,3/4,1)系统进行了几何结构优化和总能量计算,并进行了对比研究.发现stage-2晶胞的参量c(d关键词： xTiS₂')" href="#">Li_xTiS₂ 阶梯结构 有序—无序相变 第一性原理计算     

ZnO1-xCx稀磁半导体的磁特性的第一性原理和蒙特卡罗研究

利用第一性原理计算得到C掺杂ZnO的电子结构,发现系统具有半金属的电子结构.从态密度的分析可以看到Zn-3d和C-2p电子具有强烈的杂化作用,这是体系具有相对稳定铁磁基态的原因.利用第一性原理得到的磁性耦合强度并结合蒙特卡罗模拟得到了C掺杂浓度为555%,833%,125%的ZnO_1-xC_x分别具有210 K,260 K,690 K的居里温度.同时,详细地分析了C掺杂引起的电子转移和C,Zn,O的s,p和d电子的自旋向上和自旋向下电子数的变化.通过比较研究,发现ZnO_1-xC_x的局域磁矩主要来源于Zn-3d 电子和C-2p 电子之间的相互作用,而局域磁矩耦合倾向于RKKY耦合. 关键词： 1-xC_x')" href="#">ZnO_1-xC_x 磁性 第一性原理 蒙特卡罗模拟     

FeS2多晶薄膜电子结构的实验研究

用磁控溅射方法制各纯Fe薄膜，并硫化合成FeS₂. 采用同步辐射X射线近边吸收谱与X射线光电子能谱研究了薄膜的电子结构. 结果表明，合成的FeS₂薄膜，在费米能级附近，有较强的Fe 3d态密度存在，同时，在价带谱中2—10eV处有强度较大的S 3p态密度存在；Fe的3d轨道在八面体配位场作用下分别为t_2g和e_g轨道，实验中由Fe的吸收谱计算得到两分裂能级之差为2.1eV;实验测得FeS₂价带结构中导带宽度约为2.4eV，导带上方仍存在第二能隙，其宽度约为2.8eV. 关键词： 磁控溅射 二硫化铁 X射线吸收近边结构 电子结构     

密度泛函理论研究MgnOn(n=2—8)团簇的结构和电子性质

采用密度泛函理论中的广义梯度近似对Mg_nO_n(n=2—8)团簇的几何构型进行优化,并对能量、频率和电子性质进行了计算.结果表明,当n=2,3时,团簇的最低能量结构是平面结构;当n≥4时, 团簇的最低能量结构可以看成是由Mg₂O₂和Mg₃O₃单元组成的三维结构.O—Mg—O的钝角和较多的电荷转移对团簇的稳定性 关键词： nO_n团簇')" href="#">Mg_nO_n团簇 几何结构 电子性质     

锂/钠混合离子电池正极材料Na2FePO4F/C的第一性原理研究

将锂/钠混合离子电池正极材料Na₂FePO₄F/C作为研究对象，建立Na₂FePO₄F、NaFePO₄F、NaLiFePO₄F、Na₂FePO₄F/C、NaFePO₄F/C、NaLiFePO₄F/C的结构模型，并依据第一性原理密度泛函理论，分析了这六种材料的能带、态密度、键长变化以及形成能.研究结果显示，相比于单一的Na₂FePO₄F,石墨烯包覆的Na₂FePO₄F的金属特性更良好，电子传输性质更优异，同时具有更加稳定的结构，这表明在电池长时间循环过程中，Na₂FePO₄F/C晶体结构不容易发生坍塌，容量衰减率更小，这为碳包覆改性制备复合正极材料提供了理论依据.     

快离子导体AgxTiS2中Ag+离子－空位的二维基态结构与能量性质研究

根据Ag⁺离子-空位的二维有序结构建立了三维晶胞模型.采用局域密度近似下的平面波赝势方法,对有序Ag_xTiS₂(x=0,1/4,1/3,1/2,2/3,3/4,1)系列进行了几何结构优化和总能量计算,并与Li_xTiS₂系列进行了对比研究.有序Ag_xTiS₂系统的晶格参量增量Δa_{关键词： x}TiS₂')" href="#">Ag_xTiS₂ 有序—无序相变 离子扩散 第一性原理计算     

(Fe1-xNix)2P电子结构与磁学特性的X射线近边吸收谱研究

利用X射线近边吸收谱对Fe₂P,Ni₂P及其掺杂物(Fe_1-xNi_x)₂P(x=01,025,05)中Fe,Ni,P的K边进行了研究.结合多重散射理论近边计算,讨论了金属原子不同位置格点3f,3g对近边谱特征的贡献,得出当Ni原子取代Fe原子时将优先占据Fe(3f)格点位置;根据第一性原理对能态的计算发现,不考虑磁性时不同格点P的pDOS未占据态电子结构与P-K近边吸收谱实验相符合;与考虑铁磁性Fe₂P 的DOS相比较后结果显示Fe₂P的磁性主要来源于Fe(3g)格点,铁磁性Ni₂P计算的Ni不同格点原子磁矩均接近于0,与它一般显顺磁性结论相一致. 关键词： X射线近边吸收谱 电子结构 多重散射理论 态密度     

Structural and electronic properties of the Li-ion battery cathode material LixCoSiO4

The first-principles density functional theory has been employed to study the structural and electronic properties of Li_xCoSiO₄. The lattice stability of Li_xCoSiO₄ during the lithiation–delithiation process is discussed. The changes in the electronic structures of Li_xCoSiO₄ during the deintercalation of Li ions are also probed. It is found that Li₂CoSiO₄ reacts reversibly with 1 Li⁺ at an average voltage of 4.1 V versus a lithium anode. The computational results indicate that Li₂CoSiO₄ material is a potential candidate for high-capacity cathode for advanced lithium ion batteries.     

First principles study on electronic properties and occupancy sites of molybdenum doped into LiFePO4

The electronic properties of Mo-doped LiFePO₄ and occupancy sites of Mo are investigated by employing the density functional theory plane-wave pseudopotential method. The calculated results show that Mo doping at Fe site has lower formation energy, which implies that Mo dopants prefer to occupy Fe sites within the LiFePO₄ lattice. Furthermore, the LiFe_1?3/12Mo_1/12PO₄ has wider lithium ion migration channels than Li_1?6/12Mo_1/12FePO₄. For the case of LiFe_1?3/12Mo_1/12PO₄, the calculated narrow band gap (0.18 eV) indicates that the electronic conductivity of LiFePO₄ could be enhanced by doping Mo at the Fe sites. The density of states and charge densities of LiFe_1?3/12Mo_1/12PO₄ demonstrate that the Mo-4d states and MoO bonding play important roles in band gap reduction of LiFe_1?3/12Mo_1/12PO₄.     

LiFePO4中对位缺陷的第一性原理研究

基于考虑了Fe-3d电子间的库仑作用U和交换作用J的GGA+U方案,应用第一性原理计算方法系统研究了LiFePO₄的对位缺陷,以及对位缺陷的形成对材料的电导率和离子扩散速率的影响.结果表明,Li/Fe交换缺陷是最容易形成的,形成缺陷后的Fe—O键变长,扩宽了Li离子传输通道,有利于Li离子在通道中的扩散,对材料电化学性能的改善起到了一定的作用.     

Bi2Te3-xSex(x≤3)同晶化合物电子结构的第一性原理研究

本文采用基于密度泛函理论的第一性原理全势能线性缀加平面波方法(FLAPW),分析了Bi₂Te_3-xSe_x体系中各原子自旋轨道耦合(SOI)的p_1/2修正对体系性质的影响,并对Bi₂Te_3-xSe_x(x≤3)同晶化合物的电子特性进行系统的理论研究,首次计算出Bi₂S 关键词： 2Te_3-xSe_x(x≤3)同晶化合物')" href="#">Bi₂Te_3-xSe_x(x≤3)同晶化合物 第一性原理 电子结构 自旋轨道耦合     

First-principles study on the structural and electronic properties of LiB and its hydrides (Li2BnHn, n=5, 8, 12, LiBH4)

Structural, electronic and vibrating properties of LiB and its hydrides (Li₂B_nH_n, n=5, 8, 12, LiBH₄) were calculated by the first-principles using density functional theory in its generalized gradient approximation. The calculated results are in good agreement with experimental studies. The deviation between theory and experimental results are also discussed. With the increasing of H atoms in range of 5-12, the band gap energy increases and the width of the conduction band decreases. Comparing with LiB, the band gap of LiBH₄ is broadened, which indicates the enhancement of Li-B and Li-H bond strength. Valence electrons mainly transfer from Li atoms to B and H atoms. As a result, Li atoms are thought to be partially ionized as Li⁺ cations. There is little contribution of Li orbital to the occupied states, resulting in Li-H and Li-B bond exhibiting an ionic nature, and B-H bond showing a covalent nature.     

Electronic structure of defective lithium cobaltites Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>CoO<Subscript>2</Subscript>

X-ray absorption, resonant X-ray emission, and X-ray photoelectron spectroscopical methods have been applied for the study of the electronic structure of defective lithium cobaltites Li _x CoO₂ (0.6≤x≤1.0). Resonant O K α X-ray emission spectra of LiCoO₂ showed localized excitonic states due to a dd transition between occupied and unoccupied Co 3d states. On the base of measurements of Co 3s X-ray photoelectron, Co 2p, and O 1s X-ray absorption spectra, it was established that in defective cobaltites the electronic holes are localized mainly in O 2p states. An evidence of phase separation in Li _x CoO₂ has been found. It was shown that the semiconductor-to-metal transition in Li _x CoO₂ (x<0.76) at about 160 K is not accompanied by changes in the Co 3d electronic configuration which remains 3d ⁶.     

X-ray spectra and electronic structure of Li x NbO2 superconductor and other niobium oxide compounds

X-ray emission Nb and OK spectra and O1s total photoelectron yield spectra for superconductor Li_0.71NbO₂ and other niobium oxide compounds NbO, BaNb₄O₆, Ba₂Nb₅O₉, BaNb₅O₈. LiNbO₂, NbO₂, LiNbO₃ were investigated. It was found that in stoichiometric LiNbO₂, niobium oxidation degree is 3+. Under the lithium deintercalation down to Li_0.71NbO₂ composition, the niobium ions oxidation degree increases up to 3.3+. As more electrons are supplied by Nb to fill the O2p band, the degree of O2p-Nb4d hybridization is increased. Using the full-potential linear muffin-tin orbital method, the self-consistent band structure calculations of Li _x NbO₂ (x=1.0; 0.7; 0.5) compounds were carried out. Agreement between partial Nb4d and O2p densities of states and corresponding X-ray spectra was observed. For thex=0.7; 0.5 the Fermi level is placed on the slope of sharp density of states peak formed mostly by the Nb4d states. With the decrease ofx thep-d hybridization becomes stronger, although remains well below the values typical for the high-temperature superconductors.     

(Li3N)n(n=1—5)团簇结构与性质的密度泛函研究

用密度泛函理论(DFT)的杂化密度泛函B3LYP方法在6-31G*基组水平上对(Li₃N)_n(n=1—5)团簇各种可能的构型进行几何结构优化,预测了各团簇的最稳定结构. 并对最稳定结构的振动特性、成键特性、电荷特性等进行了理论研究. 结果表明,(Li₃N)_n(n=1—5)团簇中N原子的配位数以4,5较多见,Li—Li键长为0.210—0.259nm,Li原子在桥位时Li—N键长为0.185—0.204nm,Li原子在端位时Li—N键长为0.172—0.178nm;团簇中N原子的平均自然电荷为-2.01e,Li原子的平均自然电荷为+0.67e;Li₃N,(Li₃N)₅团簇有相对较高的动力学稳定性. 关键词： 3N)_n(n=1—5)团簇')" href="#">(Li₃N)_n(n=1—5)团簇 密度泛函理论 结构与性质 储氢材料     

几种三元过渡金属碳化物弹性及电子结构的第一性原理研究

基于密度泛函理论平面波方法研究了六方WC型Re_xW_1－xC(x=1, 0.25, 0.75, 0),Re_0.5Os_0.5C和Os_0.5W_0.5C的晶体结构、弹性和电子结构性质.研究发现Re_0.25W_0.75C晶体具有优异的弹性性能及稳定性,其剪切模量(312 GPa)超过了所有其他实验合成和     

A new insight into the LiFePO4 delithiation process

Raman and Fourier transform infrared measurements for Li_xM_0.03Fe_0.97PO₄, M = Cr, Cu, Al, Ti were performed. The spectra for delithiated samples to a low content of lithium extraction are practically the same as those of LiFePO₄. For a high content of lithium extraction, the spectra repeat that of FePO₄. In the case of the Li_0.11FePO₄ oxide the spectra cannot be reproduced just by the superposition of the end member profiles. An additional broad band contribution is found in both Raman and infrared spectra probably due to a disordered structure present in the mixture. This suggests that the well accepted two-phase model for the delithiation process in LiFePO₄ is incorrect. The model should be revised to include the new phase as detected here for a particular level of lithium extraction close to that of complete oxidation of the Fe²⁺ ions to Fe³⁺.