Size Effects in the Catalytic Activity of Unsupported Metallic Nanoparticles

The influence of the size of nanoparticles on their catalytic activity was investigated for two systems on unsupported, i.e. gasborne nanoparticles. For the oxidation of hydrogen on Pt nanoparticle agglomerates, transport processes had to be taken into account to extract the real nanoparticle size effects. The results indicate an optimum particle size for the catalytic activity below 5nm which points clearly toward a real volume effect. In the case of the methanation reaction on gasborne Ni nanoparticles, no transport limitations were observed and the product concentration was directly proportional to the activity of the primary particles. We found an activity maximum for particles of about 19nm in diameter. This size is too large to be attributed to a real nanoparticle size effect induced by the electronic band structure. Therefore, we concluded that the particle size influences the adsorption behavior of the carbon monoxide molecules. In fact, it is known that intermediate adsorption enthalpies may favor dissociation processes, which is an essential step for the reaction, as manifested in the so called volcano-shaped curve. Then, in addition to the material dependence of the adsorption, we would also encounter a direct size dependence in the case of methanation on gasborne Ni nanoparticles.     

Metal-on-oxide nanoparticles produced using laser ablation of microparticle aerosols

A continuous aerosol process has been studied for producing nanoparticles of oxides that were decorated with smaller metallic nanoparticles and are free of organic stabilizers. To produce the oxide carrier nanoparticles, an aerosol of 3–6 μm oxide particles was ablated using a pulsed excimer laser. The resulting oxide nanoparticle aerosol was then mixed with 1.5–2.0 μm metallic particles and this mixed aerosol was exposed to the laser for a second time. The metallic micron-sized particles were ablated during this second exposure, and the resulting nanoparticles deposited on the surface of the oxide nanoparticles producing an aerosol of 10–60 nm oxide nanoparticles that were decorated with smaller 1–5 nm metallic nanoparticles. The metal and oxide nanoparticle sizes were varied by changing the laser fluence and gas type in the aerosol. The flexibility of this approach was demonstrated by producing metal-decorated oxide nanoparticles using two oxides, SiO₂ and TiO₂, and two metals, Au and Ag.     

Temperature-programmed surface reaction (TPSR) of CH4 synthesis by PdxNi100−x nanoparticles

A series of Pd_xNi_100−x nanoparticles were prepared by the co-precipitation method and analyzed using a temperature-programmed surface reaction (TPSR) of their methanation reactions. ESCA measurement suggested that the as-prepared Pd-Ni alloys had Pd-core/Ni-shell structure. Surface Pd segregation occurred during H₂ reduction and resulted in a surface composition close to the nominal value. The TPSR experiments were performed by pre-adsorption of CO with H₂ to form methane. The peak temperature of methanation increased as Pd content increased, indicating that a methanation reaction is favored on Ni and Ni-rich alloy nanoparticles. For physical mixtures of Pd and Ni nanoparticles, methanation behaviors is similar to those of alloy nanoparticles; but the methanation temperatures of physical mixtures are always higher than those of alloy nanoparticles. This may be due to the formation of a Pd-enriched alloy surface layer during reduction in H₂ at 400 °C, or because the CO molecules adsorbed on the Pd sites spill over onto the Ni sites for methanation. Using TPSR technique and measuring methanation temperature, the top-most surface of such bimetallic nanoparticles can be probed.     

Sonochemical synthesis of carbon supported Sn nanoparticles and its electrochemical application

A sonochemical approach was employed to prepare Vulcan carbon XC-72R supported by Sn nanoparticles at room temperature in the presence of ethylene glycol. The reduction of metallic Sn ion and ethylene glycol takes place and in turn the glycolate ion as formed acts as a stabilizing agent. Transmission electron microscope, X-ray diffraction, and X-ray photoelectron spectroscopy have illustrated that the metallic Sn nanoparticles are successfully embedded on the carbon. The significantly observed reduction over potential for oxygen reduction reaction displays a higher catalytic activity of carbon supported by Sn nanoparticles due to the large surface area of the modified electrode.     

Targeting EGFR-overexpressed A431 cells with EGF-labeled silica-coated magnetic nanoparticles

Electrode catalysts composed of carbon-supported PtRu nanoparticles (PtRu/C) for use as a direct methanol fuel cell anode were synthesized by the reduction of precursor ions in an aqueous solution via irradiation with a high-energy electron beam. The effect of pH control in the precursor solution on the PtRu mixing state and the methanol oxidation activity was studied in order to enhance the catalytic activity for methanol oxidation. The PtRu/C structures were characterized by transmission electron microscopy, inductively coupled plasma atomic emission spectrometry, X-ray fluorescence spectrometry, and X-ray diffraction and X-ray absorption fine structure techniques. The methanol oxidation activity was evaluated by linear sweep voltammetry. The initial pH of the precursor solution has little influence on the average grain size for the metal particles (approximately 3.5 nm) on the carbon particle supports, but the dispersibility of the metal particles, PtRu mixing state, and methanol oxidation activity differed. The maintenance of a low pH in the precursor solution gave the best dispersibility of the PtRu nanoparticles supported on the surface of the carbon particles, whereas, a high pH gave the best PtRu mixing state and the highest oxidation current although a low dispersibility of the PtRu nanoparticles supported on the surface of the carbon particles was obtained. The PtRu mixing state strongly correlated with the methanol oxidation current. In addition, a high pH was more effective for PtRu mixing when using an electron beam irradiation reduction method, because the complexation reaction of the chelating agents was improved, which resulted in an enhancement of the catalytic activity for methanol oxidation.     

Aerosol Catalysis on Nickel Nanoparticles

Nickel nanoparticles produced by spark discharges were used as aerosol catalyst for the formation of methane. The available surface area of the particles was determined using different methods. It was found that the surface area available for nitrogen adsorption and, therefore, for the methanation reaction remained virtually constant during restructuring of the agglomerates while the surface area based on the mobility was significantly reduced. In general, the reaction parameters such as activation energy and reaction rates agree well with the values for single nickel crystals and foils. At temperatures above 350°C the activation energy and the photoelectric activity of the particles decrease indicating the formation of graphite on the particle surface. Also the change of the work function points to the build up of multiple layers of graphite on the particle surface. The surprisingly low temperature for the surface deactivation may indicate an enhanced formation of carbon atoms at the surface.     

Synthesis of titania/carbon nanocomposites by polymeric precursor method

Here we describe a single chemical route to obtain highly dispersed nanometric Ni particles embedded in titania/carbon matrixes (amorphous and crystalline). The synthesis of these nanocomposites is based on a polymeric precursor method. The metallic Ni nanoparticles (1-15 nm) were obtained in a single process. We also present the results of photocatalytic experiments involving a series of nanocrystalline composites based on TiO₂/carbon with embedded Ni nanoparticles as nanocatalysts for rhodamine 6G degradation in aqueous solution and investigate the effects of the structure and properties of the nanocomposites on their photocatalytic applications. The effect of the different annealing treatments on the formation of TiO₂ nanophases (anatase and/or rutile), the size of Ni particles and the role of the residual carbon phase on the final solid are also described.     

Production of cobalt and nickel particles by hydrogen reduction

Cobalt and nickel nanoparticles were produced by hydrogen reduction reaction from cobalt or nickel chloride precursor vapour in nitrogen carrier gas. This aerosol phase method to produce nanoparticles is a scalable one-step process. Two different setups were introduced in particle production: a batch type reactor and a continuously operated reactor. Common feature in these setups was hydrogen mixing in a vertical flow reactor. The process was monitored on-line for particle mass concentration and for gas phase chemical reactions. Tapered element oscillating microbalance measured the particle mass concentration and Fourier transform infrared spectroscopy was used to monitor relevant gas phase species. The produced cobalt and nickel particles were characterised using transmission electron microscopy and x-ray diffraction. The produced cobalt and nickel particles were crystalline with cubic fcc structure. Twinning was often observed in cobalt particles while nickel particles were mostly single crystals. The cobalt particles formed typically long agglomerates. No significant neck growth between the primary particles was observed. The primary particle size for cobalt and nickel was below 100 nm.     

纳米铂颗粒的控制生长

利用吸氢再还原法,进行逐步还原反应,合成了一系列大小的铂纳米颗粒;透射电镜和X光衍射分析表征的结果表明,铂颗粒是逐步长大的,经过32次生长,铂颗粒的平均粒径从1.8nm增加到14.1nm,平均增加步长约为0.4nm,且粒子均具较好的单分散性.     

Carbohydrate particles as protein carriers and scaffolds: physico-chemical characterization and collagen stability

We report a simple and effective supercritical fluid route to uniformly load ultrafine metal nanoparticles on the hydrophobic surfaces of graphene sheets. In the presence of supercritical carbon dioxide, PtRu alloy nanoparticles are decorated evenly on functionalized graphene sheets (FGSs) upon the reduction of organic platinum (II) and ruthenium (III) precursors, and its application as an electrocatalyst for methanol oxidation is studied. Transmission electron microscopy observation shows that highly dispersed PtRu metallic nanoparticles with an average size of about 3.11?nm are uniformly and densely distributed on the hydrophobic surface of FGSs. X-ray diffraction patterns demonstrate that the particles had a face-centered cubic crystal structure, and X-ray photoelectron spectroscopy analysis indicates the existence of zero-valence metals. Compared with the widely used Vulcan XC-72 carbon black, the PtRu/FGS composites exhibit superior catalytic activity and stability for methanol oxidation. The huge surface area of graphene and uniform distribution of nanosized metal particles are two critical factors for the significantly enhanced electrocatalytic efficiency. The findings suggest that the supercritical fluid method is highly efficient in preparing graphene-supported metallic catalysts, and FGSs serve as a favorable electrocatalytic carrier for direct methanol fuel cells.     

CO oxidation activity of Cu–CeO2 nano-composite catalysts prepared by laser vaporization and controlled condensation

Ceria supported copper catalysts were synthesized by laser vaporization and controlled condensation method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDAX) and temperature programmed reduction (TPR). The catalytic activity of the nanopowders for CO oxidation reaction was tested in a fixed bed flow tube reactor in Ar–20%O₂–4%CO mixture. Irrespective of the copper content, the catalytic activity of the nanopowders is similar in the initial CO test, and the catalytic activity improves (i.e. the light-off temperature decreases) during a subsequent run. The lowest light-off temperature during the second run is recorded in the material with 20% copper. TEM studies on 20%Cu–CeO₂ sample in the as-prepared condition and after CO test exhibit two types of ceria particles namely, polygonal particles 3–5 nm in size and spherical particles of 15–20 nm in size. Rapid cooling of the nanoparticles formed during the laser ablation results in incorporation of a large amount of copper within the ceria as solid solution. Presence of solid solution of copper is confirmed by EDAX and electron diffraction analyses. In addition, copper-rich surface layer of Cu₂O is found over the spherical particles. The cerium oxide components are essentially identical before and after CO test, except that the polygonal CeO₂ particles contain newly formed fine crystals of CuO. TPR results reveal two reduction peaks, which further supports, the presence of two different copper species in the material. The shift in light-off temperature during the second run is attributed to the synergistic interaction between newly formed CuO crystals with the CeO₂ matrix.     

Copper and copper oxide nanoparticles in a cellulose support studied using anomalous small-angle X-ray scattering

Microcrystalline cellulose is a porous natural material which can be used both as a support for nanoparticles and as a reducer of metal ions. Cellulose supported nanoparticles can act as catalysts in many reactions. Cu, CuO, and Cu₂O particles were prepared in microcrystalline cellulose by adding a solution of copper salt to the insoluble cellulose matrix and by reducing the copper ions with several reducers. The porous nanocomposites were studied using anomalous small angle X-ray scattering (ASAXS), X-ray absorption spectroscopy, and X-ray diffraction. Reduction of Cu²⁺ with cellulose in ammonium hydrate medium yielded crystalline CuO nanoparticles and the crystallite size was about 6–20 nm irrespective of the copper concentration. The size distribution of the CuO particles was determined with ASAXS measurements and coincided with the crystallite sizes. Using sodium borohydrate or hydrazine sulfate as a reducer both metallic Cu and Cu₂O nanoparticles were obtained and the crystallite size and the oxidation state depended on the amount of reducer.     

Synthesis of nickel nanoparticles in silica by alcogel electrolysis

We report a novel technique for the formation of metal nanoparticles, based on electrolysis of the alcogels containing metal chlorides. The alcogel was formed from TEOS, water, ethanol, and nickel chloride, and subjected to galvanostatic electrolysis. This resulted in successful formation of Ni nanoparticles inside the silica gel. Average particle size of FCC Ni lies between 18 and 20 nm. The formation of tetragonal nickel (a sub-oxide of nickel) as well as NiO were also detected by XRD and SAED. The resistivity measurements showed that the nickel nanoparticles were separated from each other by Ni(O) present between them. Magnetic studies based on ZFC and FC measurements below room temperature (up to 5 K) and above room temperature (up to 700 K) were conducted using SQUID and Magnetic TGA, respectively, which showed strong magnetic irreversibility as attributable to exchange interaction between metallic and oxide phases and mutual interactions among metallic particles in the network structure. The blocking temperature (~600 K) of the samples was above room temperature. M–H studies based on VSM showed an increase in magnetic coercivity with the formation of NiO. A magnetic transition associated with tetragonal nickel was seen at 10 K.     

Solvent effect in sonochemical synthesis of metal-alloy nanoparticles for use as electrocatalysts

Nanomaterials are now widely used in the fabrication of electrodes and electrocatalysts. Herein, we report a sonochemical study of the synthesis of molybdenum and palladium alloy nanomaterials supported on functionalized carbon material in various solvents: hexadecane, ethanol, ethylene glycol, polyethylene glycol (PEG 400) and Ionic liquids (ILs). The objective was to identify simple and more environmentally friendly design and fabrication methods for nanomaterial synthesis that are suitable as electrocatalysts in electrochemical applications. The particles size and distribution of nanomaterials were compared on two different carbons as supports: activated carbon and multiwall carbon nanotubes (MWCNTs). The results show that carbon materials functionalized with ILs in ethanol/deionized water mixture solvent produced smaller particles sizes (3.00 ± 0.05 nm) with uniform distribution while in PEG 400, functionalized materials produced 4.00 ± 1 nm sized particles with uneven distribution (range). In hexadecane solvents with Polyvinylpyrrolidone (PVP) as capping ligands, large particle sizes (14.00 ± 1 nm) were produced with wide particle size distribution. The metal alloy nanoparticles produced in ILs without any external reducing agent have potential to exhibit a higher catalytic activity due to smaller particle size and uniform distribution.     

Emission measurement and safety assessment for the production process of silicon nanoparticles in a pilot-scale facility

Emission into the workplace was measured for the production process of silicon nanoparticles in a pilot-scale facility at the Institute of Energy and Environmental Technology e.V. (IUTA). The silicon nanoparticles were produced in a hot-wall reactor and consisted of primary particles around 60 nm in diameter. We employed real-time aerosol instruments to measure particle number and lung-deposited surface area concentrations and size distribution; airborne particles were also collected for off-line electron microscopic analysis. Emission of silicon nanoparticles was not detected during the processes of synthesis, collection, and bagging. This was attributed to the completely closed production system and other safety measures against particle release which will be discussed briefly. Emission of silicon nanoparticles significantly above the detection limit was only observed during the cleaning process when the production system was open and manually cleaned. The majority of the detected particles was in the size range of 100–400 nm and were silicon nanoparticle agglomerates first deposited in the tubing then re-suspended during the cleaning process. Appropriate personal protection equipment is recommended for safety protection of the workers during cleaning.     

Spectroscopic characterization of Ni films on sub-10-nm silica layers: Thermal metamorphosis and chemical bonding

The thermal evolution in the chemical and physical characteristics of the Ni film of thickness 1-50 nm deposited on silica of thickness less than 10 nm was studied. The chemical composition of silica affected the thermal behavior of the Ni overlayer substantially. Nickel deposited on native oxide may diffuse downward into native oxide during annealing and was oxidized. It mainly produced Ni₃O₂ and silicides below 150 °C. Increasing the temperature to 300 °C caused further oxidation of Ni to yield NiO. The sub-10-nm silicon dioxide layer, on the other hand, can inhibit the diffusion of Ni atoms downward when the Ni-deposited sample was annealed. Instead, these atoms aggregated into small particles on the surface at elevated temperatures, causing the substrate to be exposed. The size of the particles produced can be controlled, as it increased almost linearly with the thickness of the Ni film deposited in the low thickness regime. The thinner Ni films yielded smaller, round nanoparticles with better dispersity. The particles formed were strongly adhered to the silicon dioxide surface. The bulk of the particles formed was mainly metallic. Exposing to the air of the Ni particles formed on silicon dioxide mainly produces Ni₂O₃ on the particles.     

不同晶相结构和形貌TiO2负载Ru催化剂的CO选择甲烷化

用水热法得到的钛酸纳米纤维前体,通过不同后处理方法合成了多种纳米结构的TiO₂．采用N₂等温吸附和BET比表面、X射线衍射、透射电镜和能量分散X射线分析表征了TiO₂及负载Ru催化剂的微结构,包括比表面、晶相结构和形貌以及Ru纳米颗粒尺寸分布等．对负载Ru催化剂在富氢条件下CO选择甲烷化反应活性测试表明：金红石相TiO₂和TiO₂-B为载体负载的Ru催化剂比锐钛矿相TiO₂负载的Ru催化剂表现出更高的反应性能．其活性区别说明了不同晶相结构和形貌TiO₂载体与Ru纳米颗粒的相互作用存在差异．     

Peculiar properties of nanogranular Ni<Subscript>x</Subscript>Si<Subscript>100-x</Subscript> magnetic films obtained by ultrashort pulsed laser deposition

The use of ultrashort laser pulses enables the deposition of films composed of mono-component nanoparticles exhibiting similar shape and size. Films made of nickel (Ni) and silicon (Si) nanoparticles have been produced and investigated in view of the expected interesting properties, resulting from the uniform distribution of metallic, magnetic Ni particles among semiconductive, non-magnetic Si particles. The morphology of the deposited nanoparticles and the related magnetic and magneto-transport characteristics of the films have been studied for different Ni contents, evidencing properties deriving from the peculiar deposition technique and in particular the important role of the free volume inclusions and the particles tendency to not coalesce. PACS 75.75.+a; 81.07.-b; 81.16.Mk; 73.50.Jt     

Bamboo-shaped carbon nanotubes generated by methane thermal decomposition using Ni nanoparticles synthesized in water-oil emulsions

Ni nanoparticles were synthesized using two water-in-oil emulsions formulated with different surfactants and using n-heptane as the organic phase and aqueous nickel acetate as the catalytic metallic precursor. Characterization by transmission electron microscopy showed that the Ni nanoparticles have diameters ranging from 3 to 12 nm, and that the surface is lightly oxidized. The decomposition of diluted methane catalyzed by the as-prepared Ni nanoparticles was studied in a thermogravimetric analyzer (TGA), operated in the 25–930 °C range. The weight gains measured during the analysis showed that the Ni nanoparticles decomposed methane above 480 °C, producing similar g.C/g.cat ratios (6–7) at the end of the tests. High resolution transmission electron microscopy (HRTEM) confirmed that the carbons collected at 930 °C were bamboo-shaped carbon nanotubes (BSCNTs) with well defined conical compartments. The average outside diameter of the tubes was between 30 and 60 nm.     

In situ gas-phase catalytic properties of TiC-supported size-selected gold nanoparticles synthesized by diblock copolymer encapsulation

TiC-supported size- and shape-selected Au nanoparticles with well defined interparticle distances were synthesized by diblock copolymer encapsulation. Atomic force microscopy (AFM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption (TPD) have been used to investigate the correlation between the nanocatalyst morphological/electronic structure and its chemical reactivity. Using the low-temperature oxidation of CO as a model reaction, our TPD results showed an enhancement of the catalytic activity with decreasing particle size. Two desorption features were observed and assigned to kinks/steps in the gold surface and the Au-TiC interface. The role of the interparticle distance on the activity is discussed. AFM measurements showed drastic morphological changes (Ostwald ripening) on the nanoparticles after CO oxidation when the initial interparticle distance was small (∼30 nm). However, no sintering was observed for Au nanoparticles more widely spaced (∼80 nm).