Generalized-barrier parameters for single-barrier structures and resonance width in asymmetrical double-barrier structures

Generalized-barrier parameters are studied theoretically for rectangular and trapezoidal single-barriers as well as parallel-plane ones, which are basic units for double-barrier and multiple-barrier structures. Analytical expressions for these parameters are derived by taking into account the position-dependent effective-mass effect. Furthermore, the expressions for the generalized-barrier parameters of optical single-layer thin film structures are considered and permit direct application of previous results to thin film interference filters also. The heights of resonant peaks and the resonance widths in asymmetrical double-barrier structures are studied as functions of the generalized-barrier parameters.     

光纤布拉格光栅中的隙孤子存在条件

提出光纤布拉格光栅中产生隙孤子的条件和参量制约关系。利用非线性耦合模式方程建立光纤布拉格光栅中孤子的传播方程,通过扰动方法建立了参量的微分方程,计算得到参量近似解。以周期非线性光学介质中隙孤子存在的条件为依据,数学计算分析得到两组参量关系不等式。最终通过数值计算说明了这些参量之间存在制约关系和物理意义。从而理论上说明了在光纤布拉格光栅中隙孤子存在需要选择适当参量。为光纤布拉格光栅中产生隙孤子的实验和进一步的工程应用提供了理论基础。     

Exchange interactions in rare-earth iron garnets

Exchange parameters previously reported for YbIG, ErIG and EuIG are compared. One of the three possible sets of parameters found for ErIG is shown to agree fairly well with the EuIG parameters and can also be fitted using an exchange potential. Tentative exchange potential parameters associated with the two types of superexchange pathways which couple the rare-earth ion to neighboring iron ions are obtained. A new method for calculating the YbIG exchange parameters is described and the parameters are compared with those reported previously.     

关联复杂网络建模及辨识研究

运用异质耦合拆分方法和驱动-响应模型,提出关联复杂网络节点参数和拓扑结构的辨识方法.首先,研究异质关联复杂网络建模方法,进而依据网络耦合性质不同,拆分构造了两类异质关联复杂网络.然后运用驱动-响应模型、LaSalle不变原理和Gram矩阵,设计节点系统参数和拓扑参数的自适应辨识观测器.所提的观测器能在线获取网络的节点参数、不同耦合性质的拓扑参数.最后,通过数值仿真验证所提方法的有效性.     

Experimental verification of the electromagnetic spectral interference law using a modified version of the Young's interferometer

We present a method to verify the electromagnetic spectral interference law experimentally, which connects the combined two-beam usual Stokes parameters with the corresponding single beam usual Stokes parameters. Using polarizers and phase retarders in a modified version of the Young's interferometer, the usual Stokes parameters and the generalized Stokes parameters are determined for a laser beam. The experimentally determined single point (usual) Stokes parameters at an axial point in the observation plane for the combined beam are compared with their theoretically expected values obtained by putting the experimental data in the electromagnetic spectral interference law. A fairly good agreement is found between the two values. Not only does the proposed method provides a comparison between the two kinds of Stokes parameters but also validates the role of the generalized Stokes parameters as modulation parameters for the usual Stokes parameters.     

Analysis of a static scheme of ellipsometric measurements

The specific features of the operation of a static photometric scheme of an ellipsometer are considered. Different configurations (combinations of the azimuths of optical elements) are analyzed; formulas for the calculation of the ellipsometric parameters are obtained; and, for each configuration under consideration, ranges of the unambiguous determination of these parameters are ascertained. The effect of different imperfections on the measurement accuracy of the parameters Ψ and Δ is analyzed and the possibility of a correct consideration of these imperfections is demonstrated. Methods for determining the parameters of the phase-shifting elements of the optical path are proposed. The measurement errors of the ellipsometric parameters due to inaccurate specification of the phase shifts of the compensator and the turning prism, as well as the adjustment errors of the optical elements, are determined.     

Experimental determination of two-point Stokes parameters for a partially coherent broadband light beam

The generalized Stokes parameters, which are two-point extensions of conventional Stokes parameters, are determined for a pair of points in the cross-section of a partially coherent broadband light beam. For this purpose, using a two-mirror and two-beam-splitter assembly, unpolarized, linearly polarized and partially polarized electromagnetic beams are generated. This simple experimental method for determining generalized Stokes parameters establishes an analogy with the experimental scheme of determining conventional Stokes parameters, which in succession contributes to appreciable reduction in uncertainty in the measurements.     

混沌系统的时间延迟同步误差分析

对Pecora和Carroll的混沌自同步方案的延迟同步误差进行了研究.在计算机上对Lorenz混沌系统伪装的延迟同步误差进行了模拟:给定系统参数,对应不同延迟时间,得出了均方误差与采样步长的关系曲线;给定系统参数和延迟时间,对应不同采样步长,得到了混沌时间序列的误差曲线;给定采样步长,对应不同的系统参数,获得了混沌时间序列的尺度效应和均方误差与采样步长的关系曲线.提出了减小延迟同步误差的一些方法,得到一些对混沌同步和混沌控制应用有意义的结果. 关键词： 混沌同步 时间同步 误差分析     

非线性晶体三波互作用允许参量的修正计算

采用传统级数展开方法计算晶体非线性三波互作用的允许参量,利用定义通过计算机数值模拟进行了精确计算,修正了传统计算结果,发现晶体在产生二次谐波时,在某些角度存在很宽的允许波长峰,超过传统文献值约几十倍。研究表明,在产生二次谐波时,10mm长的晶体在某些波段获得100mm以上的允许倍频带宽是可能的,并提出了移动这些宽带的方法。     

高功率固体激光器光学元件面形评价参数

结合高功率固体激光器的发展,说明了高功率光学元件面形评价参数的产生原因、发展过程及其内在因素。介绍了面形评价参数的现状,并通过讨论各面形评价参数之间的内在联系,说明了现行评价参数的综合性能及发展趋势。     

高度自动化获取书籍扫描图像畸变参数的实验

分析了利用打印直线获取书籍扫描图像畸变校正所用参数时影响精度的一些因素,并提出了相应的措施。利用Visual C++6.0编写了自动获取畸变参数的程序。对不同的垂直扫描线用不同的灰度阈值进行图像分割,得到打印直线的扫描图像上各点坐标的测量值。为提高计算速度,对畸变参数进行了估计。在估计值附近,利用网格搜索法,计算畸变参数取不同值时各点坐标的理论值。根据最小二乘法原理,当各点坐标的理论值与测量值之差的平方和最小时,所对应的一组畸变参数即为最佳解。将打印有直线的纸张裹在已知直径的圆柱体上,在不同条件下扫描图像,用所编程序自动计算畸变参数,证明了这种方法的可行性。     

Monaural and binaural parameters of Rudolfinum concert halls in Prague

Objective parameters for the evaluation of the Rudolfinum concert hall in Prague, Czech Republic are the focus of the present article. The measured results for Reverberation parameters, Energy parameters, Intelligibility parameters, and Spatial parameters of the building’s two halls are presented and discussed including a comparison with recommended values or theory, as well as several unique architectural and acoustical qualities of the halls. The early lateral energy fraction parameter is measured by the intensity probe method discussed in the supplement. The performance is verified by tests in anechoic and reverberant rooms.     

在有限温度下运用弱测量保护量子纠缠

根据单量子比特的映射, 提出一个在有限温度下运用弱测量保护两量子比特纠缠的方案. 在两个可通过局域幺正变化实现的等价的初始纠缠进入广义振幅阻尼信道前后, 对其分别进行弱测量, 并对四个弱测量的参数做全面的优化, 获取最大共生纠缠C_r 和弱测量参数m, n的解析表达式, 然后再进一步研究弱测量参数与信道参数的关系. 发现这种基于弱测量的纠缠保护方法在某些情况下可以有效地提高纠缠, 甚至可以避免纠缠的突然死亡. 当信道参数r一定时, 对不同的参数p,初始态|ψ>纠缠达到最大值时对应的弱测量参数m的取值一样, 共生纠缠关于p=0.5对称, 而初始态|φ>对应的参数m的取值不同; 在参数p一定、参数r不同、初始态|ψ>或|φ>的情况下, 当纠缠度取最大值时, 弱测量参数m的取值不变, 且随着r的增加, 纠缠度减少. 通过对信道参数的分析, 发现可以选择合适的信道参数和初始态来获得较大的纠缠.     

MODES OF CONTACT AND UNIQUENESS OF SOLUTIONS FOR SYSTEMS WITH FRICTION-AFFECTED SLIDERS

The kinetic equations of planar multi-body systems with friction-affected sliding joints are reformulated for the computation of closed-form solutions for the kinetic parameters. The state of such systems is characterized not only by the position parameters and velocities, but in addition, the modes of contact in the sliding joints must be specified. Then the cases with one or several sets of solutions, obtained for the same position parameters, velocities, active forces and friction parameters, can be related to positions of the system with different modes of contact between sliders and guiding surfaces. They are physical unequivocal states and can be interpreted as unique solutions for the kinetic problem with specified configuration of the system. If no solutions exist, then the friction parameters considered are too large and exceed limiting values, for which friction locking occurs.     

基于衰减振荡信号特征参数和伪阻抗的电路参数计算方法

本文研究了基于暂态信号中衰减振荡信号的电路参数计算理论和方法.在电力系统线路发生故障时,通过计算暂态信号流通路径电路参数可确定故障位置、推断故障原因,而衰减振荡信号作为暂态信号主要成分,因此分析基于衰减振荡信号的电路参数计算在电力系统故障定位中有重要理论价值和实际工程意义.结合R-L电路和R-C电路,首先推导了时域衰减振荡电压、电流信号特征参数与各元件参数以及电路参数间定量关系;并分析了电路在衰减振荡信号下阻抗特性,结合稳态正弦分量阻抗概念,将电路流经衰减振荡信号时的阻抗特性定义为伪阻抗,并确定了伪阻抗与电路参数和信号特征参数间的关系;同时分析了串并联条件下伪阻抗与元件参数关系.以此为基础分别提出了基于信号特征参数和基于伪阻抗的电路参数计算理论,结合现有衰减振荡信号特征提取方法,提出具体计算方法,为基于衰减振荡信号的电路参数计算理论发展以及实际工程应用奠定了重要基础.通过MATLAB模拟产生故障信号对所提理论和方法进行验证,结果证明了所提理论和方法的正确性和准确性,并以实际电网故障信息为基础,基于PSCAD/EMTDC建立实际配网模型并对实际单相接地故障进行重现,对配网单相接地故障进行定位分析,结果证明了方法的可行性.     

Influence of the cladding layer field of fiber on beam parameters

Beam parameters, including mode-field radius, divergence half-angle and beam propagation factor are studied and relations among them are derived under the condition of paraxial approximation. Several formulas of the beam parameters for end diffraction-limited from the fundamental mode of fiber are given based on the normalized standing wave parameter, normalized evanescent wave parameter and radii of core layer and circular aperture. Moreover, influence of change of the near-field on beam parameters is researched and the results show that the cladding layer field has determinant effect and cannot be neglect. These conclusions may provide theoretical foundation for further researching the beam parameters.     

钙钛矿铁电体原子势参数的灵敏度分析及优化

原子相互作用势参数在分子动力学模拟中非常关键.本文针对钙钛矿铁电体原子势参数较多的特点,提出了一种高效的优化参数的方法:首先应用灵敏度分析方法从众多参数中找到对结构和性能影响最为明显的主要参数,忽略影响很小的次要参数,大大降低优化问题的维数;然后应用遗传算法对主要参数进行优化.优化结果表明,用本文得到的势参数模拟BaTiO₃ 和SrTiO₃,其结构和物理性能更接近实验值.     

Passive remote sensing of planetary atmospheres and retrievals of atmospheric macro- and microphysical parameters

In two recent papers, referred to as Paper 1 and Paper 2 in the main text, we have pursued an idea that atmospheric weighting functions for any geophysical parameters essentially consist of two kinds of entities: weighting functions for the atmospheric radiative parameters, which directly enter the radiative transfer equation, and partial derivatives of the atmospheric radiative parameters with respect to atmospheric geophysical parameters. Corresponding analysis was performed for non-scattering and scattering planetary atmospheres for nadir-viewing geometry and thermal spectral region. In the present paper we conduct a study of the second group of above entities, the partial derivatives of atmospheric radiative parameters with respect to atmospheric geophysical parameters. Along the way, we analyze the role of radiative parameters of individual atmospheric constituents, which serve as intermediaries between the total radiative parameters of the atmosphere and its geophysical parameters. The obtained expressions, combined with radiative weighting functions, are used in the end-to-end expressions for the weighting functions obtained for various specific geophysical parameters.