A novel blue-emitting long-lasting proyphosphate phosphor Sr2P2O7:Eu,Y

By introducing the Y³⁺ into Sr₂P₂O₇:Eu²⁺, we successfully prepared a kind of new phosphor with blue long-lasting phosphorescence by the high-temperature solid-state reaction method. In this paper, the properties of Sr₂P₂O₇:Eu²⁺,Y³⁺ were investigated utilizing XRD, photoluminescence, luminescence decay, long-lasting phosphorescence and thermoluminescence (TL) spectra. The phosphor emitted blue light that was related to the 4f⁶5d¹-⁸S_7/2 transition of Eu²⁺. The bright blue phosphorescence could be observed by naked eyes even 8 h after the excitation source was removed. Two TL peaks at 317 and 378 K related to two types of defects appeared in the TL spectrum. By analyzing the TL curve the depths of traps were calculated to be 0.61 and 0.66 eV. Also, the mechanism of LLP was discussed in this report.     

Blue-emitting long-lasting phosphor, Sr3Al10SiO20:Eu,Ho

A novel blue-emitting long-lasting phosphor Sr₃Al₁₀SiO₂₀:Eu²⁺,Ho³⁺ is prepared by the conventional high-temperature solid-state technique and their luminescent properties are investigated. XRD, photoluminescence (PL) and thermoluminescence (TL) are used to characterize the synthesized phosphors. These phosphors are well crystallized by calcinations at 1500-1600 °C for 3 h. The phosphor emits blue light and shows long-lasting phosphorescence after it is excited with 254/365 nm ultraviolet light. TL curves reveal the introduction of Ho³⁺ ions into the Sr₃Al₁₀SiO₂₀:Eu²⁺ host produces a highly dense trap level at appropriate depth, which is the origin of the long-lasting phosphorescence in this kind of material. The long-lasting phosphorescence lasts for nearly 6 h in the light perception of the dark-adapted human eye (0.32 mcd/m²). All the results indicate that this phosphor has promising potential practical applications.     

Photoluminescence of Y2O3:Eu thin film phosphors by sol-gel deposition and rapid thermal annealing

Y₂O₃:Eu³⁺ phosphor films have been developed by using the sol-gel process. Comprehensive characterization methods such as Photoluminescent (PL) spectroscopy, X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR) spectroscopy were used to characterize the Y₂O₃:Eu³⁺ phosphor films. In this experiment, the XRD profiles show that the Y₂O₃:Eu³⁺ phosphor films crystallization temperature and optimum annealing temperature occur at about 650 and 750 °C, respectively. The optimum dopant concentration is 12 mol% Eu³⁺ and the critical transfer distance (R_c) among Eu³⁺ ions is calculated to be about 0.84 nm. Vacuum environment is more efficient than oxygen and nitrogen to eliminate the OH content and hence yields higher luminescent phosphor films. The PL emission intensity of Y₂O₃:Eu³⁺ phosphor films is also dependent on the annealing time. It was found that the H₂O impurities were effectively eliminated after annealing time of 25 s at 750 °C in vacuum environment. From the experiment results, the schematic energy band diagram of Y₂O₃:Eu³⁺ phosphor films is constructed.     

Thermo-luminescence kinetic parameters of γ-irradiated Sr4Al14O25:Eu2+, Dy3+ phosphors

In this paper, we present a detailed investigation of the thermo-luminescence (TL) kinetics of the long afterglow phosphor, Sr₄Al₁₄O₂₅:Eu²⁺,Dy³⁺, synthesized by the combustion method. Kinetic parameters such as the activation energy (E_α), the frequency factor (s) and the order of kinetics (b) were calculated using Chen's formulism. The crystalline structure of the phosphor was examined using X-ray powder diffraction and transmission electron microscopy. The average particle size was found to be in the range of 45–52 nm. The optimum dopant concentrations were Eu (1 mol%) and that of Dy (2 mol%). The TL response of the phosphor was monitored after the samples were irradiated with a γ-dose using a ⁶⁰Co source in the 20-800 Gy range. A broad TL peak, (stretching from 328 to 410 K) with a maximum at 368 K was observed. With increasing irradiation dose, the main peak shifts toward higher temperatures. Symmetry factor calculations show that the main TL glow peak obeys second-order kinetics, which could be attributed to the creation of deep level traps. This means that γ-ray irradiation greatly affects the distribution of traps in the Sr₄Al₁₄O₂₅:Eu²⁺,Dy³⁺ phosphor. The phosphor showed a linear response with γ-dose.     

Photoluminescence and afterglow behavior of Eu, Dy and Eu, Dy in Sr3Al2O6 matrix

This paper reports the photoluminescence and afterglow behavior of Eu²⁺ and Eu³⁺ in Sr₃Al₂O₆ matrix co-doped with Dy³⁺. The samples containing Eu²⁺ and Eu³⁺ were prepared via solid-state reaction. X-ray diffraction (XRD), photo luminescent spectroscope (PLS) and thermal luminescent spectroscope (TLS) were employed to characterize the phosphors. The comparison between the emission spectra revealed that Sr₃Al₂O₆ phosphors doped with Eu²⁺, Dy³⁺ and Eu³⁺, Dy³⁺ showed different photoluminescence. The phosphor doped with Eu³⁺, Dy³⁺ showed an intrinsic f-f transition generated from Eu³⁺, with two significant emissions at 591 and 610 nm. However, the phosphor doped with Eu²⁺, Dy³⁺ revealed a broad d-f emission centering around 512 nm. After the UV source was turned off, Eu²⁺, Dy³⁺ activated Sr₃Al₂O₆ phosphor showed excellent afterglow while Eu³⁺, Dy³⁺ activated phosphor almost showed no afterglow. Thermal simulated luminescence study indicated that the persistent afterglow of Sr₃Al₂O₆: Eu²⁺, Dy³⁺ phosphor was generated by suitable electron traps formed by the co-doped rare-earth ions (Dy³⁺) within the host.     

Investigation of the trap state of Sr2MgSi2O7: Eu2+, Dy3+ phosphor and decay process

The thermoluminescence glow curves of Sr₂MgSi₂O₇: Eu²⁺, Dy³⁺ phosphor were measured after various delay times. A single trap center is confirmed that conforms to a kinetics model with order greater than 1, leading to a suppression of TL intensity and a high temperature shift of the TL peak with longer delay times. A constant trap depth supports this phenomenon. Further, the decay curve of the afterglow and the change in initial trapped carrier concentration can be fitted using general-order kinetics and the fitting results show that the afterglow is close to a second-order kinetics process, which implies that most of the released carriers are retrapped.     

A potential red phosphor LiGd(MoO4)2:Eu for light-emitting diode application

Eu³⁺-doped LiGd(MoO₄)₂ red phosphor was synthesized by solid-state reaction, and its photoluminescent properties were measured. The effect of Eu³⁺ doping concentration on PL intensity was investigated, and the optimum concentration of Eu³⁺ doped in LiGd(MoO₄)₂ was found to be 30 mol%. Compared with Y₂O₂S:0.05Eu³⁺, Na_0.5Gd_0.5MoO₄:Eu³⁺ and KGd(MoO₄)₂:Eu³⁺, the LiGd(MoO₄)₂:Eu³⁺ phosphor showed a stronger excitation band around 395 nm and a higher intensity red emission of Eu³⁺ under 395 nm light excitation. For the first time, intensive red light-emitting diodes (LEDs) were fabricated by combining phosphor and a 395 nm InGaN chip, confirming that the LiGd(MoO₄)₂:Eu³⁺ phosphor is a good candidate for LED applications.     

Preparation and characterization of long persistence strontium aluminate phosphor

Long afterglow green phosphor SrAl₂O₄:Eu²⁺,Dy³⁺ is synthesized by a solid-state reaction method at 1350 °C under mild reducing atmosphere of activated carbon. The effects of B₂O₃ flux on the sintering dynamic process and the optimum concentrations of Eu²⁺ and Dy³⁺ for long-lasting bright luminescence property have been investigated. The effect of a small amount of charge compensators like Mg²⁺, Zn²⁺, Na⁺, and K⁺ on long persistence has also been studied. TG/DTA, SEM, and XRD have been used to characterize the synthesized phosphor.     

Effect of Eu,Tb codoping on the luminescent properties of Y2O3 nanorods

Red-emitting Y₂O₃:Eu³⁺ and green-emitting Y₂O₃:Tb³⁺ and Y₂O₃:Eu³⁺, Tb³⁺ nanorods were synthesized by hydrothermal method. Their structure and micromorphology have been analyzed by X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). The photoluminescence (PL) property of Y₂O₃:Eu³⁺,Tb³⁺ phosphor was investigated. In the same host (Y₂O₃), upon excitation with ultraviolet (UV) irradiation, it is shown that there are strong emissions at around 610 and 545 nm corresponding to the forced electric dipole ⁵D₀-⁷F₂ transition of Eu³⁺ and ⁵D₄-⁷F₅ transition of Tb³⁺, respectively. Different qualities of Eu³⁺and Tb³⁺ ions are induced into the Y₂O₃ lattice. From the excitation spectrum, we speculate that there exists energy transfer from Tb³⁺ to Eu³⁺ ions .The emission color of powders reveals regular change in the separation of light emission. These powders can meet with the request of optical display material for different colors or can be potentially used as labels for biological molecules.     

Effects of Gd and Lu co-doping on the long afterglow properties of yellowish-orange phosphor Y2O2S:Ti, Mg

A new long afterglow phosphor Y₂O₂S:Ti⁴⁺, Mg²⁺ co-doped with Gd³⁺ and Lu³⁺ was synthesized by solid-state reaction in inert gas ambient. Its properties were systematically analyzed by X-ray diffraction (XRD), luminescence spectra, afterglow decay curves and thermoluminescence (TL) spectra. It was found that the long afterglow performance of Y₂O₂S:Ti⁴⁺, Mg²⁺ such as brightness and persistent time was largely improved when co-doped with Gd³⁺ and Lu³⁺. By analyzing the TL curve the activation energy E were calculated to be 0.64 eV for 388 K peak and 0.98 eV for 508 K peak, and the trap intensity related to 388 K peak is much stronger than that related to 508 K peak. The mechanism of the long afterglow was also discussed in this paper.     

Red,Yellow, Blue and Green Emission from Eu<Superscript>3+</Superscript>, Dy<Superscript>3+</Superscript> and Bi<Superscript>3+</Superscript> Doped Y<Subscript>2</Subscript>O<Subscript>3</Subscript>nano-Phosphors

Rare earth elements (RE = Eu³⁺& Dy³⁺)and Bi³⁺ doped Y₂O₃ nanoparticles were synthesized by urea hydrolysis method in ethylene glycol, which acts as reaction medium as well as a capping agent, at a low temperature of 140 °C,followed by calcination of the obtained product. Transmission electron microscope (TEM) images reveals that ovoid shaped Y₂O₃ nanoparticles of around 22–24 nm size range were obtained in this method. The respective RE and Bi³⁺ doped Y₂O₃ precursor nanoparticles when heated at 600 and 750 °C, retains the same shape as that of the as-synthesized Y₂O₃ precursor samples. From EDAX spectra, the incorporation of RE ions into the host has been studied. XRD pattern reveals the crystalline nature of the heated nanoparticles and indicate the absence of any impurity phase other than cubic Y₂O₃.However, the as-synthesized nanoparticles were highly amorphous without the presence of any sharp XRD peaks. Photoluminescence study suggests that the synthesized samples could be used as red (Eu³⁺), yellow (Dy³⁺), blue and green (Bi³⁺)emitting phosphors.     

Synthesis and luminescent properties of BaGd2O4:Dy3+, an novel scintillating phosphor

The BaGd_2?x O₄:xDy³⁺ (0 ≤ x ≤ 0.08) phosphors were synthesized at 1,300 °C in air by the solid-state reaction route. The as-synthesized phosphors were characterized by X-ray powder diffraction, photoluminescence excitation spectra, photoluminescence (PL) spectra, X-ray excited luminescence (XEL) spectra, and thermoluminescence (TL) spectra. It is found that the quenching concentration of Dy³⁺ ions in BaGd₂O₄ host is dependent on the selected excitation wavelength. The optimal PL intensity for the investigated BaGd_2?x O₄:xDy³⁺ phosphors is found to be x = 0.01, 0.02, and 0.04, upon excitation by 234, 277, and 350 nm ultraviolet light, respectively. The energy transfer among Dy³⁺ ions upon excitation by 350 nm is confirmed to be an electric dipole–dipole interaction mechanism based on the fitting of Huang’s rule. In addition, the intensive XEL from BaGd₂O₄:Dy³⁺ phosphor is observed by the naked eyes at room temperature, and TL properties of the investigated phosphors are analyzed and discussed. All the results imply that the investigated phosphors could be a promising scintillating phosphor.     

Synthesis and Optical Characterization of Red-Emitting BaTa<Subscript>2</Subscript>O<Subscript>6</Subscript>:Eu<Superscript>3+</Superscript> Phosphors

Undoped and Eu³⁺ doped BaTa₂O₆ phosphors were synthesized via solid state reaction method and characterized by using XRD, SEM-EDS and photoluminescence (PL) analyses. The XRD results revealed that the crystal structure of BaTa₂O₆ allowed up to 10 mol% levels of Eu³⁺ ions due to the TTB characteristic network of adjacent octahedrals. SEM-EDS analyses confirmed the formation of BaTa₂O₆ structure and EuTaO₄ secondary phase. BaTa₂O_6:Eu³⁺ phosphors exhibited orange and red emissions at 592.2 nm and 615.7 nm in the visible region respectively. The Commission Internationale d’Eclairage (CIE) chromaticity coordinates of the BaTa₂O_6:Eu³⁺ phosphors that excited at λ _ex = 400 nm ranged from orangish-red to pinkish-red depending on increasing Eu³⁺ concentration.     

Eu/Tb ions co-doped white light luminescence Y2O3 phosphors

Y₂O₃:Eu³⁺, Tb³⁺ phosphors with white emission are prepared with different doping concentration of Eu³⁺ and Tb³⁺ ions and synthesizing temperatures from 750 to 950 °C by the co-precipitation method. The resulted phosphors were characterized by X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy. The results of XRD indicate that the crystallinity of the synthesized samples increases with enhancing the firing temperature. The photoluminescence spectra indicate the Eu³⁺ and Tb³⁺ co-doped Y₂O₃ phosphors show five main emission peaks: three at 590, 611 and 629 nm originate from Eu³⁺ and two at 481 and 541 nm originate from Tb³⁺, under excitation of 250-320 nm irradition. The white light luminescence color could be changed by varying the excitation wavelength. Different concentrations of Eu³⁺ and Tb³⁺ ions were induced into the Y₂O₃ lattice and the energy transfer from Tb³⁺→Eu³⁺ ions in these phosphors was found. The Commission International de l’Eclairage (CIE) chromaticity shows that the Y₂O₃:Eu³⁺, Tb³⁺ phosphors can obtain an intense white emission.     

Hydrothermal synthesis,characterization, and luminescence of Ca<Subscript>2</Subscript>B<Subscript>2</Subscript>O<Subscript>5</Subscript>:RE (RE = Eu<Superscript>3+</Superscript>, Tb<Superscript>3+</Superscript>, Dy<Superscript>3+</Superscript>) nanofibers

Ca₂B₂O₅:RE (RE = Eu³⁺, Tb³⁺, Dy³⁺) nanofibers were synthesized by the hydrothermal reaction method. The structural refinement was conducted on the base of the X-ray powder diffraction (XRD) measurements. The surface properties of the Ca₂B₂O₅:RE (RE = Eu³⁺, Tb³⁺, Dy³⁺) nanofibers were investigated by the measurements such as the scanning electron microscope (SEM), transmission electron microscope (TEM), and the energy dispersive spectrum (EDS). The nanofiber has a diameter of about 100 nm and a length of several micrometers. The luminescence properties such as photoluminescence excitation (PLE) and emission spectra (PL), decay lifetime, color coordinates, and the absolute internal quantum efficiency (QE) were reported. Ca₂B₂O₅:Eu³⁺ nanofibers show the red luminescence with CIE coordinates of (x = 0.41, y = 0.51) and the luminescence lifetime of 0.63 ms. The luminescence of Ca₂B₂O₅:Tb³⁺ nanofibers is green color (x = 0.29, y = 0.53) with the lifetime of 2.13 ms. However, Dy³⁺-doped Ca₂B₂O₅ nanofibers present a single-phase white-color phosphor with the fluorescence decay of 3.05 ms. Upon near-UV excitation, the absolute quantum efficiency is measured to be 65, 35, and 37 % for Eu³⁺-, Tb³⁺-, Dy³⁺-doped Ca₂B₂O₅ nanofibers, respectively. It is suggested that Ca₂B₂O₅:RE (RE = Eu³⁺, Tb³⁺, Dy³⁺) nanofibers could be an efficient phosphor for lighting and display.     

A study on the luminescence properties of CaAl2B2O7:Eu phosphor

The blue-emitting CaAl₂B₂O₇:Eu²⁺ phosphor was prepared at 800 °C by a modified solid-state reaction. The results of X-ray powder diffraction (XRD) analysis confirmed the formation of CaAl₂B₂O₇:Eu²⁺. Photoluminescence (PL) spectroscopy showed that the phosphor could be excited efficiently by UV-vis light from 250 to 410 nm, and exhibit blue emission (460 nm). The emission intensity of CaAl₂B₂O₇:Eu²⁺ phosphor varies with the increase of Eu²⁺concentration. The mechanism of resonance-type energy transfer from Eu²⁺ to Eu²⁺ was established to be electric multipole-multipole interaction. TEM images showed that the grain size of CaAl₂B₂O₇:Eu²⁺ is about 45 nm, which is in full agreement with the theoretical calculation data from the XRD patterns.     

Synthesis and luminescent properties of Y6W2O15:Eu phosphors

In this paper, a novel phosphor, Y₆W₂O₁₅:Eu³⁺ was synthesized by thermal decomposition and phase transition of its decatungstate gel precursor. With stepwise increase of temperature to 750 °C, a crystalline phase of Y₆W₂O₁₅:Eu³⁺forms that gives intense red emission when excited at 466 nm, the emission is attributed to the Eu³⁺ ions transitions from ⁵D₀ excited states to ⁷F_J (J=0-4) ground states. The long excitation wavelength proves the Eu³⁺ transition follows the photoexcitation of the oxygen-metal (O→W lmct) charge transfer bands in yttrium tungstate. Some structural information regarding Y₆W₂O₁₅ provided by luminescence is in accord with that characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The long-wavelength excitation properties of this material may find application in the production of red phosphors for white light-emitting diodes (LEDs).     

Thermally stable luminescence of blue LiSrPO4:Eu2+ phosphor for near-UV light-emitting diodes

Blue phosphor, LiSrPO₄:Eu²⁺, was prepared by solid-state reaction method under a weak reductive atmosphere and investigated by means of photoluminescence, concentration quenching process, and temperature dependence of luminescence. These results show that LiSrPO₄:Eu²⁺ can be efficiently excited by the UV-visible light of 250–440 nm and exhibits bright blue emission. Furthermore, Eu²⁺-doped LiSrPO₄ phosphor shows high thermally stable luminescence comparable to commercial phosphor BaMgAl₁₀O₁₇:Eu²⁺ (BAM). Two bright blue LEDs were fabricated by incorporating an InGaN-based near-UV chip with the obtained phosphor LiSrPO₄:Eu²⁺ and BAM, respectively. Their luminescence properties were compared based on different forward-bias currents. All the characteristics suggest that LiSrPO₄:Eu²⁺ is a good blue phosphor candidate for creating white light in phosphor-conversion white LEDs.     

Synthesis and luminescence properties of Na2Ba2Si2O7:Eu2+ phosphor

Green-emitting phosphor Na₂Ba₂Si₂O₇:Eu²⁺ has been synthesized by a conventional high-temperature solid-state reaction. The phase structure and luminescence properties are characterized by the X-ray powder diffraction, diffuse reflectance spectra, photoluminescence excitation and emission spectra, temperature-dependent emission spectra, respectively. It can be efficiently excited in the wavelength range of 325–400 nm and consists of a strong broad green band centered at about 501 nm, which is ascribed to 4f⁶6s⁰5d¹ → 4f⁷6s²5d⁰ transition of Eu²⁺. The critical quenching concentration of Eu²⁺ in the Na₂Ba₂Si₂O₇ host is about 0.8 mol % and corresponding quenching behavior is ascribed to be electric dipole–dipole interaction. Furthermore, the phosphor has good thermal stability property, and the activation energy for thermal quenching is calculated as 0.34 eV.     

H_3BO_3对Y_(1.98)O_3:Eu_(0.01),Dy_(0.01)红色长余辉发光材料结构和余辉性能的影响

采用高温固相法制备了发光样品Y1.98O3:Eu3+0.01,Dy3+0.01.采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、荧光光谱仪、单光子计数器测试了不同含量的H3BO3对Y1.98O3:Eu3+0.01,Dy3+0.01物相结构、颗粒形貌、发光性能、余辉性能的影响.结果表明当H3BO3含量低于8%(mol)时,样品可保持Y2O3晶格结构,且样品颗粒随H3BO3的含量增加逐渐增大.样品光致发光由Eu3+离子电子的5D0→7FJ跃迁所致,主峰位于612 nm,且发光强度随H3BO3含量的增加呈线性增强.随着H3BO3含量的增加,样品余辉衰减时间逐渐增加,热释光谱分析表明H3BO3的加入增加了基质陷阱能级的深度与浓度,故而导致样品长余辉性能的变化.