Luminescence studies of a combustion-synthesized blue–green BaAlxOy:Eu,Dy nanoparticles

Blue–green emitting BaAl_xO_y:Eu²⁺,Dy³⁺ phosphor was synthesized by the combustion method. The influence of various parameters on the structural, photoluminescence (PL) and thermoluminescence (TL) properties of the phosphor were investigated by various techniques. Phosphor nanocrystallites with high brightness were obtained without significantly changing the crystalline structure of the host. In the PL studies, broad-band excitation and emission spectra were observed with major peaks at 340 and 505 nm, respectively. The observed afterglow is ascribed to the generation of suitable traps due to the presence of the co-doped Dy³⁺ ions. Though generally broad, the peak structure of the TL glow curves obtained after irradiation with UV light was non-uniform with suggesting the contribution to afterglow from multiple events at the luminescent centers. Further insight on the afterglow behavior of the phosphor was deduced from TL decay results.     

Synthesis and luminescence properties of SrAl2O4:Eu,Dy nanosheets

We report an effective method to synthesize SrAl₂O₄:Eu²⁺,Dy³⁺ nanosheets. Sheet-like precursors were firstly synthesized by the solvothermal method, and acetate was used as the raw material. Then the final products were obtained by calcinating the precursor in a weak reductive atmosphere of H₂. The crystal structure and particle morphology were investigated by X-ray diffraction (XRD) patterns, field-emission scanning electron microscopy and transmission electron microscopy (FE-SEM and TEM) , respectively. A possible growth mechanism was proposed to reveal the formation process. Luminescence properties of the SrAl₂O₄:Eu²⁺,Dy³⁺ long-lasting phosphor were analyzed by measuring the excitation spectra, the emission spectra, the afterglow decay curve and the thermoluminescence curve. Both the photoluminescence (PL) spectra and luminance decay revealed that the phosphors had efficient luminescent and long lasting properties compared with the phosphors prepared by using nitrates as the raw material. Furthermore, the photoluminescence intensity was even a little higher than commercial phosphors.     

Hydrothermal synthesis,characterization, and luminescence of Ca<Subscript>2</Subscript>B<Subscript>2</Subscript>O<Subscript>5</Subscript>:RE (RE = Eu<Superscript>3+</Superscript>, Tb<Superscript>3+</Superscript>, Dy<Superscript>3+</Superscript>) nanofibers

Ca₂B₂O₅:RE (RE = Eu³⁺, Tb³⁺, Dy³⁺) nanofibers were synthesized by the hydrothermal reaction method. The structural refinement was conducted on the base of the X-ray powder diffraction (XRD) measurements. The surface properties of the Ca₂B₂O₅:RE (RE = Eu³⁺, Tb³⁺, Dy³⁺) nanofibers were investigated by the measurements such as the scanning electron microscope (SEM), transmission electron microscope (TEM), and the energy dispersive spectrum (EDS). The nanofiber has a diameter of about 100 nm and a length of several micrometers. The luminescence properties such as photoluminescence excitation (PLE) and emission spectra (PL), decay lifetime, color coordinates, and the absolute internal quantum efficiency (QE) were reported. Ca₂B₂O₅:Eu³⁺ nanofibers show the red luminescence with CIE coordinates of (x = 0.41, y = 0.51) and the luminescence lifetime of 0.63 ms. The luminescence of Ca₂B₂O₅:Tb³⁺ nanofibers is green color (x = 0.29, y = 0.53) with the lifetime of 2.13 ms. However, Dy³⁺-doped Ca₂B₂O₅ nanofibers present a single-phase white-color phosphor with the fluorescence decay of 3.05 ms. Upon near-UV excitation, the absolute quantum efficiency is measured to be 65, 35, and 37 % for Eu³⁺-, Tb³⁺-, Dy³⁺-doped Ca₂B₂O₅ nanofibers, respectively. It is suggested that Ca₂B₂O₅:RE (RE = Eu³⁺, Tb³⁺, Dy³⁺) nanofibers could be an efficient phosphor for lighting and display.     

Enhanced luminescence of Ca3B2O6:Dy phosphors by Na-codoping for LED applications

The Ca_2.95−yDy_0.05B₂O₆:yNa⁺ (0≤y≤0.20) phosphors were synthesized at 1100 °C in air by the solid-state reaction route. The as-synthesized phosphors were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), photoluminescence excitation (PLE), photoluminescence (PL) spectra and thermoluminescence (TL) spectra. The PLE spectra show the excitation peaks from 300 to 400 nm due to the 4f-4f transitions of Dy³⁺. This mercury-free excitation is useful for solid-state lighting and light-emitting diodes (LEDs). The emission of Dy³⁺ ions on 350 nm excitation was observed at 480 nm (blue) due to the ⁴F_9/2→⁶H_15/2 transitions, 575 nm (yellow) due to ⁴F_9/2→⁶H_13/2 transitions and 660 nm (red) due to weak ⁴F_9/2→⁶H_11/2 emissions. The PL results from the investigated Ca_2.95−yDy_0.05B₂O₆:yNa⁺ phosphors show that Dy³⁺ emissions increase with the increase of the Na⁺ codoping ions. The integral intensity of yellow to blue (Y/B) can be tuned by controlling Na⁺ content. By the simulation of white light, the optimal CIE value (0.328, 0.334) can be achieved when the content of Na⁺-codoping ions is y=0.2. The results imply that the Ca_2.95−yDy_0.05B₂O₆:yNa⁺ phosphors could be potentially used as white LEDs.     

White-light emission from Li<Subscript>2</Subscript>Sr<Subscript>1−3<Emphasis Type="Italic">x</Emphasis>/2</Subscript>Dy<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>SiO<Subscript>4</Subscript> phosphors

Li₂Sr_1−3x/2Dy _x SiO₄ phosphors were synthesized at 900°C in the normal atmosphere by a solid-state method. The synthesized phosphors were characterized by X-ray powder diffraction (XRD) and photoluminescence (PL) spectra. The photoluminescence excitation (PLE) spectra show excitation peaks ranging from 300 to 400 nm due to the 4f-4f transitions of Dy³⁺. This mercury-free excitation is useful for solid-state lighting and light-emitting diodes (LEDs). The predominant emission of Dy³⁺ ions under 349 nm excitation is observed at 479 nm (blue) due to the ⁴F_9/2→⁶H_15/2 transitions and 572 nm (yellow) due to ⁴F_9/2→⁶H_13/2 transitions, respectively. The PL results reveal that the optimal concentration of the Dy³⁺ ions in Li₂Sr_1−3x/2Dy _x SiO₄ phosphors is x=0.03 mol. The nature of the resonance energy transfer for the Dy³⁺ ions is confirmed by Huang’s rule. Simulation of the white light excited by 349 nm near-ultraviolet (n-UV) light is also performed for its potential for white LEDs.     

Synthesis and Optical Properties of Novel Red-Emitting PbNb<Subscript>2</Subscript>O<Subscript>6</Subscript>: Eu<Superscript>3+</Superscript> Phosphors

Undoped and PbNb₂O_6:Eu³⁺ (1.0 ≤ x ≤ 6.0 mol%) phosphors were synthesized at 1100 °C for 3.5 h by the conventional solid state reaction method. Synthesized PbNb₂O₆:Eu³⁺ phosphors were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive spectroscopy (EDS) and Photoluminescence (PL) analyses. The PL spectra showed series of excitation peaks between 350 and 430 nm due to the 4f–4f transitions of Eu³⁺. For 395.0 nm excitation, emission spectra of Eu³⁺ doped samples were observed at 591 nm (orange) and 614 nm (red) due to the ⁵D₀ → ⁷F₁ transitions and ⁵D₀ → ⁷F₂ transitions, respectively. PL analysis results also showed that the emission intensity increased by increasing Eu³⁺ ion content. No concentration quenching effect was observed. The CIE chromaticity color coordinates (x,y) of the PbNb₂O₆:Eu³⁺ phosphors were found to be in the red region of the chromaticity diagram.     

Luminescence of KCaSO4Cl:X, Y (X=Eu or Ce; Y=Dy or Mn) halosulfate material

Polycrystalline KCaSO₄Cl:Eu, Dy, KCaSO₄Cl:Ce, Dy and KCaSO₄Cl:Ce, Mn phosphors prepared by a solid state diffusion method have been studied for its photoluminescence (PL) characteristics. The presence of two overlapping bands at around 400 and 450 nm in the PL emission spectra of the phosphor suggests the presence of Eu²⁺ in the host compound occupying two different lattice sites. The effects of co-doping on the photoluminescence (PL) characteristics of KCaSO₄Cl:Eu or Ce phosphors have been studied. The decrease in peak intensity of the phosphor on co-doping it with Dy gives an insight into the emission mechanism of the phosphors, which involves energy transfer from Eu²⁺→Dy³⁺, Ce³⁺→Dy³⁺ and Ce³⁺→Mn²⁺.     

Photoluminescence spectra of thenardite Na2SO4 activated with rare-earth ions, Ce, Sm, Tb, Dy and Tm

Five Na₂SO₄:RE³⁺ phosphors activated with rare-earth (RE) ions (RE³⁺=Ce³⁺, Sm³⁺, Tb³⁺, Dy³⁺ and Tm³⁺) were synthesized by heating natural thenardite Na₂SO₄ from Ai-Ding Salt Lake, Xinjiang, China with small amounts of rare-earth fluorides, CeF₃, SmF₃, TbF₃, DyF₃ and TmF₃, at 920 °C in air. The photoluminescence (PL) and optical excitation spectra of the obtained phosphors were measured at 300 and 10 K. In the PL spectrum of Na₂SO₄:Ce³⁺ at 300 K, two overlapping bands with peaks at 335 and 356 nm due to Ce³⁺ were first observed. Narrow bands observed in PL and excitation spectra of Na₂SO₄:RE³⁺ (RE³⁺=Sm³⁺, Tb³⁺, Dy³⁺ and Tm³⁺) phosphors were well identified with the electronic transitions within the 4fⁿ (n=5, 8, 9 and 12) configurations of RE³⁺. The existence of excitation bands with high luminescence efficiency at wavelengths shorter than 230 nm is characteristic of Na₂SO₄:RE³⁺ (RE³⁺=Sm³⁺, Tb³⁺, Dy³⁺ and Tm³⁺) phosphors. The obtained results suggest that these phosphors are unfavorable as the phosphor for usual fluorescence tubes, i.e., mercury discharge tubes, but may be favorable as the phosphor for UV-LED fluorescent tubes and as cathodoluminescence, X-ray luminescence and thermoluminescence phosphors.     

Crystal structure and photoluminescence of (Y1−xCex)2Si3O3N4

Oxonitridosilicate phosphors with compositions of (Y_1−xCe_x)₂Si₃O₃N₄ (x=0−0.2) have been synthesized by solid state reaction method. The structures and photoluminescence properties have been investigated. Ce³⁺ ions have substituted for Y³⁺ ions in the lattice. The emission and excitation spectra of these phosphors show the characteristic photoluminescence spectra of Ce³⁺ ions. Based on the analyses of the diffuse reflection spectra and the PL spectra, a systematic energy diagram of Ce³⁺ ion in the forbidden band of sample with x=0.02 is given. The best doping Ce content in these phosphors is ∼2 mol%. The quenching temperature is ∼405 K for the 2 mol% Ce content sample. The luminescence decay properties were investigated. The primary studies indicate that these phosphors are potential candidates for application in three-phosphor-converted white LEDs.     

Luminescence investigations on sulfate apatite Na6(SO4)2FCl:RE (RE=Dy, Ce or Eu) phosphors

A new phosphor in the Cl-F system doped with Dy, Ce and Eu has been reported. Characterization of this phosphor using XRD, PL and TL techniques is described. Polycrystalline Na₆(SO₄)₂FCl:Dy; Na₆(SO₄)₂FCl:Ce and Na₆(SO₄)₂FCl:Eu phosphors prepared by a solid state diffusion method have been studied for their X-ray diffraction, photoluminescence (PL) and thermoluminescence (TL)characteristics. The PL excitation and emission spectra of phosphors were obtained. Dy³⁺ emission in the host at 475 and 570 nm is observed due to ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transition, respectively, whereas the PL emission spectra of Na₆(SO₄)₂FCl:Ce phosphor shows the Ce³⁺ emission at 322 nm due to 5d→4f transition of Ce³⁺ ion. In Na₆(SO₄)₂FCl:Eu lattice, Eu²⁺ as well as Eu³⁺ emissions are observed. The emission of europium ion in this compound exhibits the blue as well as red emission. The TL glow curves of the same compounds have the simple structure with a prominent peak at 150, 175 and 200 °C. TL response, fading, reusability and trapping parameters of the phosphors are also studied. The TL glow curves of γ-irradiated Na₆(SO₄)₂FCl sample show one glow peak indicating that only one set of traps is being activated within the particular temperature range each with its own value of activation energy (E) and frequency factor (s). The trapping parameters associated with the prominent glow peak are calculated using Chen’s half width method. The release of hole/electron from defect centers at the characteristic trap site initiates the luminescence process in these materials. The intensity of the TL glow peaks increases with increase of the added γ-ray dose to the samples.     

溶胶-凝胶法制备BaGd1-xEuxB9O16红色磷光粉的发光

采用溶胶-凝胶法制备出BaGd_1-xEu_xB₉O₁₆红色磷光粉,对过程的物料配比、前驱体处理和晶化温度等制备条件进行了讨论。结果表明,样品在850 ℃下开始晶化,900 ℃时就能够获得较好的晶化产物,结合不同晶化温度下的发光强度比较确定,晶化温度为950 ℃时,BaGd_1-xEu_xB₉O₁₆磷光粉具有较高的结晶状态和发光强度。当Eu浓度x=0.9时具有最大的发光强度;初始原料配比硼酸须按计量过量15%。所得荧光粉的激发光谱峰值为264,394,465,534 nm等,分别归属于Eu-O电荷迁移带及Eu³⁺的⁷F₀-⁵L₆、⁷F₀-⁵D₂和⁷F₀-⁵D₁跃迁,发射光谱呈Eu³⁺的特征红光,最强的发射峰位于614 nm,归属于⁵D₀-⁷F₂跃迁。进一步研究表明该磷光粉中存在着Gd³⁺对Eu³⁺的能量传递。     

Photoluminescence and thermoluminescence characterization of Eu- and Dy -activated Ca3(PO4)2 phosphor

Rare-earth-doped polycrystalline Ca₃(PO₄)₂:Eu, Ca₃(PO₄)₂:Dy and Ca₃(PO₄)₂:Eu,Dy phosphors prepared by a modified solid-state synthesis has been studied for its X-ray diffraction, thermoluminescence (TL) and photoluminescence (PL) characteristics. The PL emission spectra of the phosphor suggest the presence of Eu³⁺ ion in Ca₃(PO₄)₂:Eu and Dy³⁺ ion in Ca₃(PO₄)₂:Dy lattice sites. The TL glow curve of the Ca₃(PO₄)₂:Eu compounds has a simple structure with a prominent peak at 228 °C, while Ca₃(PO₄)₂:Dy peaking at 146 and 230 °C. TL sensitivity of phosphors are compared with CaSO₄: Dy and found 1.52 and 1.20 times less in Ca₃(PO₄)₂:Eu and Ca₃(PO₄)₂:Dy phosphors, respectively. The Ca₃(PO₄)₂:Eu,Dy phosphors shows switching behavior under two different excitation wavelengths and enhancement in PL intensity of Dy³⁺ ions were reported. The paper discusses the photoluminescence and thermoluminescence behavior of Eu³⁺ and Dy³⁺ ion in Ca₃(PO₄)₂ hosts, it may be applicable to solid-state lighting as well as thermoluminescence dosimetry applications.     

Synthesis and luminescence properties of red long-lasting phosphor Y2O2S:Eu3+, Zn2+, Ti4+ nanotubes via hydrothermal method

Red long-lasting phosphor Y₂O₂S:Eu³⁺, Zn²⁺, Ti⁴⁺ nanotubes were prepared by hydrothermal method. Powder X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence and thermoluminescence spectra (TL) were used to characterize the long-lasting phosphor. XRD investigation revealed that the product synthesised under 750 °C for 6 h was a pure phase of Y₂O₂S. SEM observation showed that the sulfuretted phosphor inherited the tube-like shape from the precursor. Under 325 nm UV excitation, the result indicated the strongest red-emission lines at 627 nm, corresponded to the transition from ⁵D₀ to ⁷F₂ level of Eu³⁺ ion. Both the afterglow decay curves and TL curves revealed that the phosphor had efficient luminescent and excellent long-lasting properties.     

Dy3+ emission in M5(PO4)3F (M = Ca, Ba) phosphor

Ultrafine M₅(PO₄)₃F:Dy³⁺ (M = Ca, Ba) phosphors were prepared via combustion process using metal nitrates as precursors. The formation of crystalline phosphate was confirmed by X-ray diffraction pattern. The PL excitation spectra show the excitation peaks observed at 250 to 400 nm due to f → f transition of Dy³⁺ ion, which are useful for solid-state lighting purpose (mercury free excitation). The PL emission of Dy³⁺ ion by 348 nm excitation gave an emission at 489 nm (blue), 582 nm (yellow) and 675 nm (red). All the characteristics of BYR emissions like BGR indicate that Dy doped Ca₅(PO₄)₃F and Ba₅(PO₄)₃F phosphors are good candidates that can be applied in solid-state lighting phosphor (mercury free excited lamp phosphor) and white light LED.      

Photoluminescence and afterglow behavior of Eu, Dy and Eu, Dy in Sr3Al2O6 matrix

This paper reports the photoluminescence and afterglow behavior of Eu²⁺ and Eu³⁺ in Sr₃Al₂O₆ matrix co-doped with Dy³⁺. The samples containing Eu²⁺ and Eu³⁺ were prepared via solid-state reaction. X-ray diffraction (XRD), photo luminescent spectroscope (PLS) and thermal luminescent spectroscope (TLS) were employed to characterize the phosphors. The comparison between the emission spectra revealed that Sr₃Al₂O₆ phosphors doped with Eu²⁺, Dy³⁺ and Eu³⁺, Dy³⁺ showed different photoluminescence. The phosphor doped with Eu³⁺, Dy³⁺ showed an intrinsic f-f transition generated from Eu³⁺, with two significant emissions at 591 and 610 nm. However, the phosphor doped with Eu²⁺, Dy³⁺ revealed a broad d-f emission centering around 512 nm. After the UV source was turned off, Eu²⁺, Dy³⁺ activated Sr₃Al₂O₆ phosphor showed excellent afterglow while Eu³⁺, Dy³⁺ activated phosphor almost showed no afterglow. Thermal simulated luminescence study indicated that the persistent afterglow of Sr₃Al₂O₆: Eu²⁺, Dy³⁺ phosphor was generated by suitable electron traps formed by the co-doped rare-earth ions (Dy³⁺) within the host.     

Luminescent properties of Eu2+and Dy3+ ions in Ba4Al2O7 phosphor for solid state lighting

In this paper we report the combustion synthesis of rare earth (RE=Eu, Dy) doped Ba₄Al₂O₇ phosphors. Prepared phosphors were characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), CIE color co-ordinates and their photoluminescence (PL) properties were also investigated. In case of Ba₄Al₂O₇: Eu²⁺, the emission spectra show unique band centered at 495 nm, which corresponds to the 4f⁶5d¹→4f⁷ transition of Eu²⁺, and PL emission spectra of Dy³⁺ ion under 348 nm excitation give two bands centered at 478 nm (blue) and 575 nm (yellow), which originate from the transitions of ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 of Dy³⁺, respectively. The results indicate that the Eu²⁺ and Dy³⁺ activated Ba₄Al₂O₇ phosphor could find application in solid state lighting.     

Photoluminescence studies of NaCaPO4:RE (RE=Dy, Mn or Gd)

The purpose of the present study is to develop an understanding of photoluminescence properties of Dy³⁺, Mn²⁺ or Gd³⁺doped NaCaPO₄ phosphors, which have served as efficient phosphors in many industrial applications. The phase formation was confirmed by the X-ray powder diffraction (XRD) measurement. Photoluminescence (PL) excitation spectrum measurement of NaCaPO₄:Dy³⁺ shows this phosphor can be efficiently excited by near-ultraviolet (UV) light from 300 to 400 nm and presents dominant luminescence band centered at 480 nm (blue) and 573 nm (yellow). The PL excitation of NaCaPO₄:Mn²⁺ and Gd³⁺ under UV wavelength shows the emissions at 520 and 313 nm, respectively. A scanning electron microscope (SEM) shows an average crystallite size in sub-micrometer range. The obtained results show that the phosphors have the potential for application in the lamp industry and medical applications.     

Optical properties of Sm3+ and Dy3+ ions in Gd2MoB2O9 host lattice

Gd₂MoB₂O₉ doped with Sm³⁺ and Dy³⁺ were used for this study. The photoluminescence behaviors of Sm³⁺ and Dy³⁺ in this phosphor material were investigated by the excitation and emission spectra. The Sm³⁺-doped Gd₂MoB₂O₉ phosphor powders show a red luminescence, whereas the Dy³⁺-doped Gd₂MoB₂O₉ phosphor powders show a yellow luminescence. In addition, the optimum doping concentration and the time-resolved luminescence spectroscopy were also investigated.     

Luminescence characteristics of Dy3+ activated Na 2Sr 2Mg (BO 3)2F 2: Dy 3+ phosphor

In this paper, we have reported a new Na ₂Sr ₂Mg (BO ₃)₂F ₂:Dy ³⁺ thermoluminescence (TL) phosphor prepared via the wet chemical method. Prepared phosphor was characterized by X-ray powder diffraction, photoluminescence (PL), TL and scanning electronmicroscopy techniques. The scanning electronmicroscopic image of Na ₂Sr ₂Mg (BO ₃)₂F ₂:Dy ³⁺ phosphor confirms the micron size of particles. Under the PL study, the characteristic emission spectrum of Dy ³⁺ corresponding to ⁴F _9/2→⁶H _15/2 (481 nm) and ⁴F _9/2→⁶H _13/2 (576 nm) transitions was observed. The TL property of the as prepared phosphor was also found to be good. TL intensity of Na ₂Sr₂Mg(BO ₃)F ₂:Dy ³⁺ phosphors at 0.99 kGy exposure of γ-irradiations was compared with standard CaSO ₄:Dy phosphor. It was seen that TL intensity of Na ₂Sr ₂Mg (BO ₃)₂F ₂: Dy ³⁺ phosphors is 1.1 times less compared with the standard CaSO ₄:Dy TL dosimeter phosphor. The kinetic parameters are also discussed in detail. The values of activation energy E (eV) and frequency factor S (s ^?1) were found to be 0.57 eV and 1.25×10⁶ s^?1, respectively.     

Dyand Mn emission in KMgSO4Cl phosphor

In the present paper, KMgSO₄Cl:Ce³⁺, KMgSO₄Cl:Ce³⁺,Dy³⁺, and KMgSO₄Cl:Ce³⁺,Mn²⁺, new halosulphate phosphors were synthesized by wet chemical method. X-ray powder diffraction (XRD) and photoluminescence (PL) characterization of phosphors have been reported in this paper. The effects of Dy³⁺ co-doping on the PL characteristics of KMgSO₄Cl:Ce phosphor were studied. Energy transfer from Ce³⁺→Dy³⁺and Ce³⁺→Mn²⁺ results in increase in PL peak intensity suggesting that Ce³⁺ plays an important role in PL emission in the present matrix. The PL emission spectra have two peaks (482 and 571 nm) and a single peak (564 nm), which could be attributed to the Ce³⁺→Dy³⁺and Ce³⁺→Mn²⁺ emissions, respectively.