刚性圆柱体上圆阵波束形成性能分析

以环绕在刚性圆柱体上的均匀圆阵为阵列模型,分析了刚性圆柱体对圆阵响应的影响,在声场分解所得到的相位模式空间,推导了相位模式波束形成阵列和延迟求和波束形成阵列的白噪声增益和指向性指数的定量表达式,分析了它们在不同频率段的变化规律。在存在和不存在刚性圆柱体两种情况下,对两种阵列性能进行了对比分析。研究了圆阵与圆柱体之间存在间隙时对阵列接收信号及阵列性能的影响。仿真结果表明,在两种情况下相位模式波束形成处理都具有频率不变的指向性,但在低频段牺牲了阵列的鲁棒性;延迟求和波束形成处理在整个频率段具有较好的鲁棒性,但随频率的降低其波束指向性下降,直至变成各向同性阵列。存在刚性圆柱体时,两种阵列鲁棒性均有了一定的提高,前者的指向性不变,而后者的指向性得到了提高。圆阵与圆柱体之间的间隙会降低阵列在高频段的鲁棒性。      

圆柱阵子阵分级处理的稳健超指向性波束形成方法

提出了圆柱阵子阵分级处理的稳健超指向性波束形成方法。首先建立了圆柱阵分两级子阵进行波束形成的信号模型,接着利用空间均匀噪声场中噪声互谱矩阵的循环特性得到基于特征波束分解与综合模型的圆柱阵超指向性的最优解,然后仿真研究了其误差敏感度函数、阵增益和波束图等性能指标,并与圆柱阵的传统全局处理方法进行了对比。提出的分两级子阵处理的超指向性方法与传统全局处理方法相比不仅降低了数据存储量和波束形成计算量,而且进一步提升了稳健性,并且在低频段的阵增益远远高于常规波束形成的值,对水下声呐阵列的设计具有一定的参考价值。      

Generating sensor signals in isotropic noise fields

Researchers in the signal processing community often require sensor signals that result from a spherically or cylindrically isotropic noise field for simulation purposes. Although it has been shown that these signals can be generated using a number of uncorrelated noise sources that are uniformly spaced on a sphere or cylinder, this method is seldom used in practice. In this paper algorithms that generate sensor signals of an arbitrary one- and three-dimensional array that result from a spherically or cylindrically isotropic noise field are developed. Furthermore, the influence of the number of noise sources on the accuracy of the generated sensor signals is investigated.     

相关阵在抑制局部相关噪声中的应用

本文提出用阵元间互相关作为基元加权求和形成波束(相关阵)，并给出用来抑制线阵局部强相关干扰的一种权向量实现方法。海上试验数据处理结果表明，利用本文提出的权向量实现相关阵比CBF阵有较高的信噪比增益和较好的抗噪声干扰能力。     

球体表面圆环阵模态域稳健高增益波束形成方法研究

通过对考虑障板影响下噪声互谱矩阵的精确求解,给出了一种计算刚性球体表面圆环阵阵增益的模型,并在此基础上提出了一种模态域二阶锥规划稳健高增益波束形成方法。该方法根据相位模态波束形成理论,将阵元域稳健加权向量转换为模态域的稳健模态系数,从而设计出不同模态阶数下的稳健高增益波束。由于采用了白噪声增益约束以及低频段较低的模态阶数,该方法提高了超增益波束形成器的稳健性。仿真结果表明该方法能够提供更多的稳健波束形成的方案,在多个关联的波束性能指标之间获得比常规方法和阵元域稳健性方法更合理的折衷。      

The diffracted sound field from the transition region of an axisymmetric body in water

Understanding the physical features of the diffracted sound field on the surface of an axisymmetric body is important for predicting the self-noise of a sonar mounted on an underwater platform.The diffracted sound field from the transition region of an axisymmetric body was calculated by the geometrical theory of diffraction.The diffraction ray between the source point and the receiving point on the surface of an axisymmetric body was calculated by using the dynamic programming method.Based on the diffracted sound field,a simulation scheme for the noise correlation of the conformal array was presented.It was shown that the normalized pressure of the diffracted sound field from the transition region reduced with the increases of the frequency and the curvature of the ray.The flow noises of two models were compared and a rather optimum fore-body geometric shape was given.Furthermore,it was shown that the correlation of the flow noise in the low frequencies was stronger than that in the high frequencies.And the flow noise received by the acoustic array on the curved surface had a stronger correlation than that on the head plane at the designed center frequency,which is important for sonar system design.     

声纳导流罩吸声障板声学特性的研究

本文研究内容属于舰艇声兼容性技术研究的一部分。应用声学软件SYSNOISE计算了,声纳定向发射时某试验用声纳导流罩及尾部吸声障板的声场特性,同时进行相同工况的水下模型试验。计算结果与试验结果吻合良好,说明应用声学软件对声纳声场进行计算是一种可行的方法,有可能推广至其他的水下模型的声场计算。结果数据反映了吸声障板对声纳定向发射时声场的影响,为舰艇总体声纳导流罩内吸声障板的结构设计、声兼容设计提供依据。     

Acoustic multipath structure in direct zone of deep water and bearing estimation of tow ship noise of towed line array

In the towed line array sonar system, the tow ship noise is the main factor that affects the sonar performance. Conventional noise cancelling methods assume that the noise is towards the endfire direction of the array. An acoustic experiment employing a towed line array is conducted in the western Pacific Ocean, and a strange bearing-splitting phenomenon of the tow ship noise is observed in the array. The tow ship noise is split into multiple noise signals whose bearings are distributed between 10° and 90° deviating from the endfire direction. The multiple interferences increase the difficulty in recognizing the target for the sonar operator and noise cancellation. Therefore, making the mechanism clear and putting forward the tow ship noise splitting bearing estimation method are imperative. In this paper, the acoustic multi-path structure of the tow ship in deep water is analyzed. Then it is pointed out that the bearing-splitting phenomenon is caused by the main lobe of direct rays and bottom-reflected rays, as well as several side lobes of direct rays. Meanwhile, the indistinguishability between the elevation angle and the bearing angle due to the axial symmetry of a strict horizontal line array causes the bearing to deviate from the endfire direction. Based on the theory above, a method of estimating bearing of the tow ship noise in deep water is proposed. The theoretical analysis results accord with the experimental results, which helps to identify the target and provide correct initial bearing guidance for noise cancelation methods.     

On direct optimization in mode space for robust supergain beamforming of circular array mounted on a cylinder

A direct robust supergain method in mode space for the circular array mounted on an infinite rigid cylinder was proposed,and then it was also applied to the circular array mounted on a finite rigid cylinder which is more practical.According to the concept of phase modes,the beam pattern is expanded into a series of eigen-beams multiplying by modal coefficients. The modal noise cross spectral matrix is calculated from sound scattering theory.In the original modal robust supergain method,the coefficient vector in mode space is transformed indirectly from the weighting vector in sensor space.The method presented here gives the most suitable modal coefficient vector directly under the related constraint conditions based on the second-order cone programming.The results of simulation show that the direct modal robust supergain method can not only improve robustness using the white noise gain constraint, but also change the mode orders to provide compromise between array gain and robustness in low frequencies.Beam performance measures such as sidelobe level can be optimized as well as array gain,so this method can give more effective schemes for designing practical robust supergain beamformers.     

柱体表面圆环阵稳健高增益波束形成的模态域直接优化方法研究

以无限长刚性柱体表面圆环阵为研究对象,提出了一种直接模态域稳健高增益波束形成方法,并将其应用到更实际的有限长刚性柱体表面圆环阵。该方法运用相位模态理论将波束响应表示成特征波束与模态系数的乘积后求和的形式,并结合散射理论求解了其模态域的噪声互谱矩阵。与已有的模态域稳健高增益方法需利用阵元域权值间接求取近似模态权系数不同的是,该方法利用二阶锥规划,在满足相关约束条件下直接给出了最优的模态权系数。仿真结果表明,直接模态域方法不仅能通过白噪声增益约束提高稳健性,在低频段还能通过改变模态阶数更灵活地在阵增益和稳健性之间折中,同时对旁瓣级等其它性能指标也能很好地控制,可用以有效设计实用的稳健高增益波束形成器。      

Robust supergain beamforming for circular array via second-order cone programming

The phenomenon of supergain for a circular array and its robust beamforming are presented. The coplanar superdirective array gain of the circular array, although it is not so extreme as an endfire line array, outperforms a lot over that of a conventional delay-and-sum beamformer in isotropic noise fields when the inter-element spacings are much smaller than one-half wavelength. However, optimum beamforming algorithms can be extremely sensitive to slight errors in array characteristics. The performance are known to degrade significantly if some of underlying assumptions on the sensor array is violated. Therefore, white noise gain constraint is used to improve the robustness of the supergain beamformer against random errors. We show that the design of the weight vector of robust supergain beamformer can be reformulated as a form of second-order cone programming and resolved efficiently via the well-established interior point method. Results of computer simulation for a 24-element circular array confirm satisfactory performance of the approach proposed in this paper.     

海洋环境噪声空间相关特性建模综述*

相对于大多数声纳,海洋环境噪声通常被视为背景干扰。水听器基阵的信噪比增益成为了基阵设计和性能估计的重要参数。从空间相关特性的角度看,当信号场已知时,阵增益可唯一由噪声场的空间相关特性来确定,这就是海洋环境噪声空间相关特性建模的动机。根据环境和声场之不同,文献中已给出几种不同的噪声场模型。为了阐明已有模型的特点及未来的研究方向,本文对噪声场空间相关特性建模做了简要综述。     

风成噪声背景下垂直阵阵列信噪比随声源深度的变化规律

风成噪声是海洋中最广泛存在的环境噪声、是被动声纳处理性能的重要影响因素.它具有一个典型的物理性质是很大程度上只对应中高阶模态.阵列信噪比计入了阵列采样辐射声强、背景噪声功率和阵处理增益,是决定声纳阵列处理性能的关键物理量.本文研究了受风成噪声模态结构影响,典型夏季浅海环境中垂直阵阵列信噪比随声源深度的变化关系.在简正波模深函数采样完整的假设条件下,理论证明了阵列信噪比随声源深度的变化可近似为低阶模态幅度强度(模深函数模值的平方)随深度变化的线性叠加,且模态阶数越低,贡献越大;并且,在强风成噪声背景、显著负梯度环境下该变化规律可由1阶模态幅度强度随深度的变化近似独立表征.以上结果表明,在同一声源距离条件下,声源置于水体下半部分时的阵列信噪比比置于海面附近更大,并且在位于1阶模态峰值点所在深度附近时达到最大.典型负声速梯度浅海环境中的仿真实验结果对理论分析进行了验证,并表明在一定条件下阵列信噪比随声源深度的变化与声源距离近似无关.     

微弱信号源的和波束定向方法与分裂波束定向方法的性能比较

本文讨论水下辐射噪声源的精确定向问题，给出被动声纳和波束定向与分裂波束定向方法的性能比较。指出在一定信噪比下，分裂波束精确测向技术比和波束定向技术具有较高的定向精度。但是，随着信噪比的下降，两者趋于一致。推导了估计定向精度的分析表达式，给出在直线阵和圆弧阵情况下，延时估计和声源入射角偏差之间的换算公式和数值模拟结果。同时给出数字式声纳用以计算入射信号左波束和右波束数据的互谱来实现分裂波束定向的方法。     

Optimum array design to maximize Fisher information for bearing estimation

Source bearing estimation is a common application of linear sensor arrays. The Cramer-Rao bound (CRB) sets a lower bound on the achievable mean square error (MSE) of any unbiased bearing estimate. In the spatially white noise case, the CRB is minimized by placing half of the sensors at each end of the array. However, many realistic ocean environments have a mixture of both white noise and spatially correlated noise. In shallow water environments, the correlated ambient noise can be modeled as cylindrically isotropic. This research designs a fixed aperture linear array to maximize the bearing Fisher information (FI) under these noise conditions. The FI is the inverse of the CRB, so maximizing the FI minimizes the CRB. The elements of the optimum array are located closer to the array ends than uniform spacing, but are not as extreme as in the white noise case. The optimum array results from a trade off between maximizing the array bearing sensitivity and minimizing output noise power variation over the bearing. Depending on the source bearing, the resulting improvement in MSE performance of the optimized array over a uniform array is equivalent to a gain of 2-5 dB in input signal-to-noise ratio.     

用于X射线激光实验研究的列阵柱面透镜线聚焦系统

用平行排列的柱面透镜列阵与非球面会聚透镜组成一个新颖的激光线聚焦系统,它能获得光强分布非常均匀的、能应用于X射线激光实验研究的高功率激光焦线。实验证明该聚焦系统有良好的特性。     

Experimental study of noise emitted by circular cylinders with large roughness

The aerodynamic noise generated by high Reynolds number flow around a bluff body with large surface roughness was investigated. This is a relevant problem in many applications, in particular aircraft landing gear noise. A circular cylinder in cross-flow and a zero-pressure-gradient turbulent boundary layer with various types of roughness was tested in a series of wind tunnel experiments. It has been shown that distributed roughness covering a circular cylinder affects the spectra over the entire frequency range. Roughness noise is dominant at high frequencies, and the peak frequency is well described by Howe?s roughness noise model when scaled with the maximum outer velocity. There are differences between hemispherical and cylindrical roughness elements for both the circular cylinder and the zero-pressure-gradient turbulent boundary layer cases, indicating a dependence on roughness shape, not described by the considered roughness noise models. Cylindrical roughness generates higher noise levels at the highest frequencies, especially for the zero-pressure-gradient turbulent boundary layer case. Cable-type roughness aligned with the mean flow does not generate roughness noise, and its spectrum has been found to collapse with the smooth cylinder at medium and high frequencies. At low and medium frequencies the noise spectra have the same features as the smooth cylinder, but with higher shedding peak levels and fall-off levels, despite the decrease in spanwise correlation length. Roughness induces early separation, and thus a shift of the spectra to lower frequencies.     

The power spectrum and correlation of flow noise for an axisymmetric body in water

Understanding the physical features of the flow noise for an axisymmetric body is important for improving the performance of a sonar mounted on an underwater platform. Analytical calculation and numerical analysis of the physical features of the flow noise for an axisymmetric body are presented and a simulation scheme for the noise correlation on the hydrophones is given. It is shown that the numerical values of the flow noise coincide well with the analytical values. The main physical features of flow noise are obtained. The flow noises of two different models are compared and a model with a rather optimal fore-body shape is given. The flow noise in horizontal symmetry profile of the axisymmetric body is non-uniform, but it is omni-directional and has little difference in the cross section of the body. The loss of noise diffraction has a great effect on the flow noise from boundary layer transition. Meanwhile, based on the simulation, the noise power level increases with velocity to approximately the fifth power at high frequencies, which is consistent with the experiment data reported in the literature. Furthermore, the flow noise received by the acoustic array has lower correlation at a designed central frequency, which is important for sonar system design.     

水声信号处理领域新进展

本文介绍近30年来水声信号处理领域理论研究的新进展和在声纳设计中的应用。包括水声信号建模、声场匹配、海洋波导和内波现象的探索和研究、声矢量场信息获取和处理,低频水声信道的时/空相关特性,水下目标辐射噪声的不变特征量提取和检测技术,水下语音、图像传输和抗干扰技术。同时概述,声纳设计的前沿领域:大孔径拖曳线列阵声纳、高分辨力合成孔径声纳、深海传呼机等的发展情况。