表面氢化的双层氮化硼的结构和电子性质

采用第一性原理方法研究了表面氢化的双层氮化硼的结构和电子性质.考虑了表面氢化的双层BN可能存在的六种主要构型,计算结果表明:AB-BN和AA-BN两种构型最为稳定.进一步分析了氢化后的双层BN最稳定构型的能带和电子性质.AB-BN和AA-BN两种构型的原子薄片均为直接带隙半导体,GGA计算的带隙值分别为1.47 eV和1.32 eV.因为GGA通常严重低估带隙值,采用hybrid泛函计算得到带隙值分别为2.52eV和2.34 eV.在最稳定的AB-BN和AA-BN两种构型中,B-N键呈现共价键,而B-H和N-H则具有明显的离子键的特点.在双轴应变下氢化双层BN原子薄片可以被连续地调节带隙,当晶格常数被压缩约8%时,原子薄片由半导体性转变为金属性.     

旋转双层石墨烯的电子结构

本文将第一性原理和紧束缚方法结合起来, 研究了层间不同旋转角度对双层石墨烯的电子能带结构和态密度的影响. 分析发现, 旋转双层石墨烯具有线性的电子能量色散关系, 但其费米速度随着旋转角度的减小而降低. 进一步研究其电子能带结构发现, 不同旋转角度的双层石墨烯在M点可能会出现大小不同的的带隙, 而这些能隙会增强双层石墨烯的拉曼模强度, 并由拉曼光谱实验所证实. 通过对比双层石墨烯的晶体结构和电子态密度, 发现M点处带隙来自于晶体结构中的“类AB堆垛区”. 关键词： 旋转双层石墨烯 第一性原理 紧束缚 电子结构     

双空位掺杂氟化石墨烯的电子性质和磁性

基于密度泛函理论,计算了外来原子X(Al,P,Ga,As,Si)双空位替代掺杂氟化石墨烯的电子特性和磁性.通过对计算结果分析发现,与石墨烯的双空位掺杂类似,氟化石墨烯的双空位掺杂也是一种较为理想的掺杂方式.通过不同原子掺杂,氟化石墨烯的电子性质与磁性均发生很大变化:Al和Ga掺杂使氟化石墨烯由半导体变为金属,并且具有磁性;P和A8掺杂使氟化石墨烯变为自旋半导体;Si掺杂氟化石墨烯仍是半导体,只改变带隙且没有磁性.进一步讨论磁性产生机制获得了掺杂原子浓度与磁性的关系,并且发现不同掺杂情况的磁性是由不同原子的不同轨道电子引起的.双空位掺杂不仅丰富了氟化石墨烯的掺杂方式,其不同电磁特性也使此类掺杂结构在未来的电子器件中具有潜在应用.     

高通量计算二维材料界面摩擦

建立了基于第一性原理方法研究二维材料界面摩擦的高通量计算程序,该程序实现了自动化批量建模、批量提交任务、多任务并发计算,以及计算结果自动收集、处理和图像绘制,使用该程序可以节省时间.采用此程序计算了不同层间距离下双层氮化硼和双层石墨烯的滑移势能面,及层间界面摩擦力和摩擦系数.研究发现,随着层间距离减小,双层氮化硼界面的平均摩擦力近似线性增大,摩擦系数为0.11—0.17,双层石墨烯界面摩擦力先增大后减小再增大,其摩擦系数在12 nN载荷下达到最小值(0.014),这些结果与已有研究结果一致,验证了该计算程序的可靠性.此外还研究了表面氢化和氟化对双层氮化硼界面摩擦的影响,发现氟化氮化硼/氮化硼界面的摩擦系数更低.     

三角形石墨烯纳米片电子和磁学性质的尺寸效应

基于密度泛函理论, 本文研究了氢钝化锯齿形边缘三角形石墨烯纳米片的电子结构和磁学性质, 这种石墨烯纳米结构的基态表现出强烈的磁性边缘态和量子尺寸效应。 我们应用多种交换关联泛函, 对体系的自旋密度和电子结构进行了第一性原理计算和理论分析, 结果表明三角形石墨烯纳米片的总磁矩和自旋随尺寸线性变化,平均磁矩随着尺寸变大而增加, 并逐渐趋于一个定值。 与此同时, 体系的能隙随着尺寸增加而减小, 其中自旋不变能隙的调控对光学响应和光子激发有着重要意义。 计算得到的单电子能谱表明, 费米能级的简并度与体系尺寸成正比。 应用多种交换关联泛函的计算结果表明, 三角形石墨烯纳米片具有可调控的自旋和能隙, 为其在纳米级光电器件和磁性半导体的应用方面提供了理论依据.     

表面氢化双层硅烯的结构和电子性质

采用密度泛函理论(DFT)广义梯度近似GGA和HSB06方法研究了氢化双层硅烯(silicene)的结构和电子性质, 结果表明: 氢化后的双层硅烯可能存在三种稳定的构型, AA椅型、AB椅型和AA船型, 其中AA椅型和AB椅型结构最为稳定, 氢化后这三种稳定构型材料的性质由零带隙的半金属(semimetal)转变为禁带宽度分别为1.208, 1.437和1.111 eV 的间接带隙的半导体, 采用混合泛函HSB06计算修正得到的带隙分别为1.595, 1.785 和1.592 eV. 进一步分析了在双轴应变下氢化双层硅烯的带隙随应变的关系, 得到应变可以连续的调节材料的带隙宽度, 这些性质有可能应用于未来的纳米电子器件.     

镍层间掺杂多层石墨烯的电子结构及光吸收特性研究

采用密度泛函理论计算分析镍原子层间掺杂对多层石墨烯电子结构和光吸收性能的影响.计算结果表明,掺杂镍原子后的石墨烯电子结构发生了改变,双层和三层石墨烯的带隙均可打开,最大带隙为0.604 eV;镍原子掺杂后的石墨烯d轨道电子的态密度在费米能级处产生尖峰效应,体系等离子能量增强;介电常数虚部和消光系数均增大,吸光性能提高.相关工作对深入探讨石墨烯的光学特性具有重要参考价值.     

H,F修饰单层GeTe的电子结构与光催化性质

采用基于密度泛函理论的第一性原理平面波赝势方法,计算了单层GeTe、表面氢化及氟化单层GeTe的晶体结构、稳定性、电子结构和光学性质.计算结果表明,经过修饰后, GeTe的晶格常数、键角、键长增大,且均具有较好的稳定性.电子结构分析表明,单层GeTe为间接带隙半导体,全氢化修饰、全氟化修饰以及氢氟共修饰(F, Ge同侧;H, Te同侧)则转变为直接带隙半导体,且修饰后的能隙均不同程度减小.载流子有效质量表明,全氢化、全氟化以及氢氟共修饰GeTe (F, Ge同侧;H, Te同侧)的有效质量减小,其载流子迁移率增强.带边势分析结果显示,单层GeTe能够光裂解水制氢和析氧,而修饰后的GeTe的价带带边势明显下移,其氧化性明显增强,能够光裂解水析O2, H2O2, O3以及OH·等产物.光学性质表明,修饰后的GeTe对可见光区和红、紫外区的光谱吸收效果明显增强,表明其在光催化领域有着广阔的应用前景.     

扭转双层石墨烯物理性质、制备方法及其应用的研究进展

石墨烯是一种准二维蜂窝网状结构新型纳米材料,石墨烯的层数和构型对其性能产生重要影响.固体中准粒子的量子状态由其本身的对称性质所决定,扭转双层石墨烯打破了对称性,引起了强烈的层间耦合作用,改变了扭转双层石墨烯的电子能带、声子色散、形成能垒等物性,产生了独特的性能,如可以连续调控带隙0-250 meV,光电效应的响应度相比于单层石墨烯提高了80倍,因此对扭转双层石墨烯功能化研究有重大意义.本文同时还论述了扭转双层石墨烯向类金刚石转变的理论与实验研究进展,发现扭转双层石墨烯呈现出具有类金刚石结构与性能特征.进一步阐述调控扭转双层石墨烯的扭转角度对其内在性能的影响,揭示这种新型纳米结构在原子层次的行为特征.最后介绍了如何调控制备扭转双层石墨,分析其调控机理,讨论了各种制备工艺的不足与发展趋势.因此本文从扭转双层石墨烯的输运性质、晶体结构转变、制备三个方面展开阐述,并对其在先进电子器件领域的潜在应用进行了展望.     

氢化与非氢化石墨烯纳米条带的密度泛函研究

基于密度泛函理论的第一性原理计算方法,研究了宽度N=8的边缘氢化和非氢化条带的结构和电子性质. 研究表明,扶手形无氢化石墨纳米条带的边缘碳原子是以三重键相互结合,它在边缘的成键强度比氢化时要高,具有更强的化学活性,可作为纳米化学传感器的基础材料. 能带结构计算表明,无论是扶手形条带还是锯齿形条带,它们都是具有带隙的半导体,且无氢化条带的带隙要比氢化的条带带隙宽度大,氢化对于条带的电子性质具有显著修饰作用. 通过锯齿形石墨纳米条带顺磁性、铁磁性和反铁磁性的计算,发现反铁磁的状态最稳定,并且边缘磁性最强,这有利于条带在自旋电子器件中的应用. 关键词： 石墨纳米条带 成键机理 电子结构 自旋分布     

Electronic properties of BN-doped bilayer graphene and graphyne in the presence of electric field

In the present paper, we have used density functional theory to study electronic properties of bilayer graphene and graphyne doped with B and N impurities in the presence of electric field. It has been demonstrated that a band gap is opened in the band structures of the bilayer graphene and graphyne by B and N doping. We have also investigated influence of electric field on the electronic properties of BN-doped bilayer graphene and graphyne. It is found that the band gaps induced by B and N impurities are increased by applying electric field. Our results reveal that doping with B and N, and applying electric field are an effective method to open and control a band gap which is useful to design carbon-based next-generation electronic devices.     

Semimetal behavior of bilayer stanene

Stanene is a two-dimensional (2D) buckled honeycomb structure which has been studied recently owing to its promising electronic properties for potential electronic and spintronic applications in nanodevices. In this article we present a first-principles study of electronic properties of fluorinated bilayer stanene. The effect of tensile strain, intrinsic spin-orbit and van der Waals interactions are considered within the framework of density functional theory. The electronic band structure shows a very small overlap between valence and conduction bands at the Γ point which is a characteristic of semimetal in fluorinated bilayer stanene. A relatively high value of tensile strain is needed to open an energy band gap in the electronic band structure and the parity analysis reveals that the strained nanostructure is a trivial insulator. According to our results, despite the monolayer fluorinated stanene, the bilayer one is not an appropriate candidate for topological insulator.     

Impurities in a biased graphene bilayer

We study the problem of impurities and midgap states in a biased graphene bilayer. We show that the properties of the bound states, such as localization lengths and binding energies, can be controlled externally by an electric field effect. Moreover, the band gap is renormalized and impurity bands are created at finite impurity concentrations. Using the coherent potential approximation, we calculate the electronic density of states and its dependence on the applied bias voltage.     

GeH/π层间弱相互作用调控锗烯电子结构的机制

锗烯是继石墨烯、硅烯发现以来最重要的二维纳米材料之一, 以其优异的物理化学性质迅速得到人们的广泛关注. 然而, 锗烯具有的零带隙能带特点(狄拉克点)极大程度地限制了其在微电子纳米材料方面的应用. 本文采用范德华力修正的密度泛函计算方法, 研究了锗烯、锗烷、锗烯/锗烷的几何和电学性质. 研究发现, 锗烯和锗烷可以通过弱相互作用形成稳定的双层结构, 并在锗烯中打开一个85 meV的带隙. 电子结构分析表明, Ge-H/π 的存在破坏了锗烯子晶格的对称性, 从而在狄拉克点上打开一个带隙. 差分电荷密度图分析表明有部分电荷从H原子的s轨道转移至Ge的p_z轨道. 该电荷转移机制增强了锗烯与锗烷之间的相互作用力, 是形成锗烯/锗烷双层二维纳米结构的主要原因. 进一步研究还发现, 锗烷/锗烯/锗烷的三明治结构无法在锗烯中打开带隙. 这是由于两侧的锗烷对夹层的锗烯作用力等价, 无法破坏锗烯的子晶格对称性, 所以无法打开锗烯带隙. 最后, 所有计算结果都在高精度杂化密度泛函HSE06计算精度下得到进一步验证. 因此, 本文从理论上提出了一种切实可行的打开锗烯狄拉克点的方法, 为锗烯在场效应管和其他纳米材料中的应用提供了理论指导.     

Landau levels in deformed bilayer graphene at low magnetic fields

We review the effect of uniaxial strain on the low-energy electronic dispersion and Landau level structure of bilayer graphene. Based on the tight-binding approach, we derive a strain-induced term in the low-energy Hamiltonian and show how strain affects the low-energy electronic band structure. Depending on the magnitude and direction of applied strain, we identify three regimes of qualitatively different electronic dispersions. We also show that in a weak magnetic field, sufficient strain results in the filling factor ν=±4 being the most stable in the quantum Hall effect measurement, instead of ν=±8 in unperturbed bilayer at a weak magnetic field. To mention, in one of the strain regimes, the activation gap at ν=±4 is, down to very low fields, weakly dependent on the strength of the magnetic field.     

Electronic transport in dual-gated bilayer graphene at large displacement fields

We study the electronic transport properties of dual-gated bilayer graphene devices. We focus on the regime of low temperatures and high electric displacement fields, where we observe a clear exponential dependence of the resistance as a function of displacement field and density, accompanied by a strong nonlinear behavior in the transport characteristics. The effective transport gap is typically 2 orders of magnitude smaller than the optical band gaps reported by infrared spectroscopy studies. Detailed temperature dependence measurements shed light on the different transport mechanisms in different temperature regimes.     

The low energy electronic band structure of bilayer graphene

We employ the tight binding model to describe the electronic band structure of bilayer graphene and we explain how the optical absorption coefficient of a bilayer is influenced by the presence and dispersion of the electronic bands, in contrast to the featureless absorption coefficient of monolayer graphene. We show that the effective low energy Hamiltonian is dominated by chiral quasiparticles with a parabolic dispersion and Berry phase 2π. Layer asymmetry produces a gap in the spectrum but, by comparing the charging energy with the single particle energy, we demonstrate that an undoped, gapless bilayer is stable with respect to the spontaneous opening of a gap. Then, we describe the control of a gap in the presence of an external gate voltage. Finally, we take into account the influence of trigonal warping which produces a Lifshitz transition at very low energy, breaking the isoenergetic line about each valley into four pockets.     

A theoretical study on tuning band gaps of monolayer and bilayer SnS2 and SnSe2 under external stimuli

Based on density functional theory, we systematically study the mechanical and electronic properties of monolayer and bilayer SnS₂ and SnSe₂. The electronic properties of these layers can be significantly tuned by applying in-plane strains and electric fields perpendicular to the sheets. The band gaps of monolayer SnS₂ and SnSe₂ slightly increase with the in-plane tensile strains, and they start to decrease after critical strains (5% for monolayer SnS₂ and 7% for monolayer SnSe₂). The band gaps of bilayer SnS₂ and SnSe₂ have a similar tendency to the monolayers with smaller critical strains (1% for bilayer SnS₂ and 2% for bilayer SnSe₂), which enables a semiconductor-to-metal transition at 10% strain for bilayer SnSe₂. We also find that an external electric field perpendicular to bilayer SnS₂ and SnSe₂ modulates their electronic band gaps. Semiconductor-to-metal transitions are achieved at the electric fields of 0.27 V/Å for bilayer SnS₂ and 0.13 V/Å for bilayer SnSe₂.