Triply coupled vibrational band gap in a periodic and nonsymmetrical axially loaded thin-walled Bernoulli–Euler beam including the warping effect

The propagation of triply coupled vibrations in a periodic, nonsymmetrical and axially loaded thin-walled Bernoulli–Euler beam composed of two kinds of materials is investigated with the transfer matrix method. The cross-section of the beam lacks symmetrical axes, and bending vibrations in the two perpendicular directions are coupled with torsional vibrations. Furthermore, the effect of warping stiffness is included. The band structures of the periodic beam, both including and excluding the warping effect, are obtained. The frequency response function of the finite periodic beam is simulated with the finite element method. These simulations show large vibration-based attenuation in the frequency range of the gap, as expected. By comparing the band structure of the beam with plane wave expansion method calculations that are available in the literature, one finds that including the warping effect leads to a more accurate simulation. The effects of warping stiffness and axial force on the band structure are also discussed.     

周期薄壁开口梁中的双耦合振动带隙

本文研究了由两种材料组合构成的周期性薄壁开口梁的弯曲和扭转双耦合振动。基于双耦合振动方程，给出了平面波展开法。当填充比不变时，晶格常数是影响带隙相对宽带的一个因素；当晶格常数和填充比不变时，杨氏模量是影响带隙宽带的主要因素，而不是密度。利用有限元法计算了有限周期结构的振动频率响应，在带隙频率范围内，振动衰减40dB左右。这些发现对于声子晶体的应用具有重要意义。     

Flexural vibration band gaps in thin plates with two-dimensional binary locally resonant structures

The complete flexural vibration band gaps are studied in the thin plates with two-dimensional binary locally resonant structures, i.e. the composite plate consisting of soft rubber cylindrical inclusions periodically placed in a host material. Numerical simulations show that the low-frequency gaps of flexural wave exist in the thin plates. The width of the first gap decreases monotonically as the matrix density increases. The frequency response of the finite periodic thin plates is simulated by the finite element method, which provides attenuations of over 20dB in the frequency range of the band gaps. The findings will be significant in the application of phononic crystals.     

Complete flexural vibration band gaps in membrane-like lattice structures

The propagation of flexural vibration in the periodical membrane-like lattice structure is studied. The band structure calculated with the plane wave expansion method indicates the existence of complete gaps. The frequency response function of a finite periodic structure is simulated with finite element method. Frequency ranges with vibration attenuation are in good agreement with the gaps found in the band structure. Much larger attenuations are found in the complete gaps comparing to those directional ones. The existence of complete flexural vibration gaps in such a lattice structure provides a new idea for vibration control of thin plates.     

多振子梁弯曲振动中的局域共振带隙

从梁的弯曲振动方程出发,利用传递矩阵法,给出了无限周期结构的一维多振子声子晶体梁的弯曲振动能带结构,并利用有限元方法计算了有限周期结构梁的弯曲振动频率响应.建立了多振子声子晶体梁的简化模型,推导出带隙起始截止频率公式.结果表明:一维多振子声子晶体梁具有比单振子声子晶体梁更宽更丰富的振动带隙,可应用于呈倍频关系的减振降噪中;振动在带隙频率范围内频率响应具有明显的衰减;所建立的简化模型与理论模型结果符合较好.研究工作为梁类结构的减振提供一种新的思路.     

基于波传播法的周期复合板振动带隙衰减特性研究

运用波传播法对有限和无限周期对边简支复合板的振动带隙衰减特性进行了研究.在建立相邻板结构边界连续方程的基础上, 分别运用传递矩阵和Bloch定理建立了有限和无限周期复合板的耦合运动方程, 并详细对比分析了有限和无限周期复合板带隙衰减特性的关联关系.研究表明: 周期板结构的振动带隙频率范围与激励方式和激励位置是相关的, 若周期复合板在宽度方向按某阶模态进行线激励, 则该激励下的振动带隙与无限周期复合板在该阶模态下的振动带隙是一致的; 若周期板在点激励作用, 则该点激励下的振动带隙是参与振动的各阶模态振动带隙的交集. 此外, 还进一步研究了结构阻尼对振动衰减带隙的影响. 关键词： 周期复合板 带隙衰减特性 波传播法 结构阻尼     

Optimal synthesis of 2D phononic crystals for broadband frequency isolation

The spatial distribution of material phases within a periodic composite can be engineered to produce band gaps in its frequency spectrum. Applications for such composite materials include vibration and sound isolation. Previous research focused on utilizing topology optimization techniques to design two-dimensional (2D) periodic materials with a maximized band gap around a particular frequency or between two particular dispersion branches. While sizable band gaps can be realized, the possibility remains that the frequency bandwidth of the load that is to be isolated might exceed the size of the band gap. In this paper, genetic algorithms are used to design squared bi-material unit cells with a maximized sum of band-gap widths, with or without normalization relative to the central frequency of each band gap, over a prescribed total frequency range of interest. The optimized unit cells therefore exhibit broadband frequency isolation characteristics. The effects of the ratios of contrasting material properties are also studied. The designed cells are subsequently used, with varying levels of material damping, to form a finite vibration isolation structure, which is subjected to broadband loading conditions. Excellent isolation properties of the synthesized material are demonstrated for this structure.     

Optimal synthesis of 2D phononic crystals for broadband frequency isolation

The spatial distribution of material phases within a periodic composite can be engineered to produce band gaps in its frequency spectrum. Applications for such composite materials include vibration and sound isolation. Previous research focused on utilizing topology optimization techniques to design two-dimensional (2D) periodic materials with a maximized band gap around a particular frequency or between two particular dispersion branches. While sizable band gaps can be realized, the possibility remains that the frequency bandwidth of the load that is to be isolated might exceed the size of the band gap. In this paper, genetic algorithms are used to design squared bi-material unit cells with a maximized sum of band-gap widths, with or without normalization relative to the central frequency of each band gap, over a prescribed total frequency range of interest. The optimized unit cells therefore exhibit broadband frequency isolation characteristics. The effects of the ratios of contrasting material properties are also studied. The designed cells are subsequently used, with varying levels of material damping, to form a finite vibration isolation structure, which is subjected to broadband loading conditions. Excellent isolation properties of the synthesized material are demonstrated for this structure.     

Exact wave-based Bloch analysis procedure for investigating wave propagation in two-dimensional periodic lattices

This paper presents an exact, wave-based approach for determining Bloch waves in two-dimensional periodic lattices. This is in contrast to existing methods which employ approximate approaches (e.g., finite difference, Ritz, finite element, or plane wave expansion methods) to compute Bloch waves in general two-dimensional lattices. The analysis combines the recently introduced wave-based vibration analysis technique with specialized Bloch boundary conditions developed herein. Timoshenko beams with axial extension are used in modeling the lattice members. The Bloch boundary conditions incorporate a propagation constant capturing Bloch wave propagation in a single direction, but applied to all wave directions propagating in the lattice members. This results in a unique and properly posed Bloch analysis. Results are generated for the simple problem of a periodic bi-material beam, and then for the more complex examples of square, diamond, and hexagonal honeycomb lattices. The bi-material beam clearly introduces the concepts, but also allows the Bloch wave mode to be explored using insight from the technique. The square, diamond, and hexagonal honeycomb lattices illustrate application of the developed technique to two-dimensional periodic lattices, and allow comparison to a finite element approach. Differences are noted in the predicted dispersion curves, and therefore band gaps, which are attributed to the exact procedure more-faithfully modeling the finite nature of lattice connection points. The exact method also differs from approximate methods in that the same number of solution degrees of freedom is needed to resolve low frequency, and arbitrarily high frequency, dispersion branches. These advantageous features may make the method attractive to researchers studying dispersion characteristics, band gap behavior, and energy propagation in two-dimensional periodic lattices.     

基于二维声子晶体的大尺寸夹心式换能器的优化设计

夹心式换能器应用极为广泛,但当其横向尺寸过大时,存在耦合振动,影响其辐射面的位移分布.本文通过在大尺寸夹心式换能器的前盖板中加工周期排列的槽,来形成一种二维声子晶体结构.随后,采用有限元法对基于二维声子晶体的大尺寸夹心式换能器的振动传输特性、共振频率以及发射电压响应进行仿真模拟,讨论了开槽高度和开槽宽度对其带隙、共振与反共振频率、带宽以及辐射面位移分布的影响.研究结果表明,通过在大尺寸夹心式换能器中应用声子晶体结构可对其进行优化设计.当大尺寸夹心式换能器的工作频率位于其带隙范围内时,二维声子晶体结构能有效地抑制其横向振动,从而改善换能器辐射面位移分布的均匀程度.此外,在大尺寸夹心式换能器的前盖板中加工二维声子晶体结构,能有效提升换能器的带宽,进而拓宽大尺寸夹心式换能器的工作频带.     

X形超阻尼局域共振声子晶体梁弯曲振动带隙特性

以声子晶体理论为基础,设计了一种具有超阻尼特性的X形局域共振结构,分析了周期性附加X形局域共振的梁弯曲振动传播特性.利用拉格朗日方程分析了X形局域共振结构动力学等效特性,揭示了该结构的阻尼放大的机理,分析了几何结构参数对于带隙特性的影响,并利用有限元法验证了X形局域共振结构的超阻尼特性.研究结果表明,周期性附加X形局域结构能够有效地抑制低频弯曲振动在梁中的传播,产生超阻尼特性,实现低频、宽带的减振效果,为结构的低频减振提供了一个新的设计方案.     

Influence of the torsional vibration of the periodically attached perpendicular beam resonator on the flexural band of a Euler-Bernoulli beam

The bending and torsional vibration of the periodic perpendicular cantilever beam-mass resonators (PCBMR) is idealized as translational and rotational oscillators attached to the main beam. In this paper, the effect of that torsional vibration of the PCBMR on the dynamics of an infinitely long Euler-Bernoulli beam is evaluated. The band-structure is explored by implementing the transfer matrix method in conjunction with Bloch-Floquet's theorem. The combination of the translational and rotational oscillator modifies the relative position of the coupling coefficient in the transfer matrix, which plays a pivotal role in the band-gap formation. The flexural band-structure is highly sensitive to the torsional vibration while the radius of gyration of the tip mass is considerably higher than the length of the PCBMR. Ill-tuning leads to split and reduction of attenuation band to 50%; whereas, around 38% elongation of the attenuation band in the low frequency regime can be achieved by proper tuning.     

Wave propagation characterization and design of two-dimensional elastic chiral metacomposite

In this work, a chiral metacomposite is proposed by integrating two-dimensional periodic chiral lattice with elastic metamaterial inclusions for low-frequency wave applications. The plane harmonic wave propagation in the proposed metacomposite is investigated through the finite element technique and Bloch's theorem. Band diagrams are obtained to illustrate wave properties of the chiral metacomposite. Effective dynamic properties of the chiral metacomposite are numerically calculated to explain low-frequency bandgap behavior in the chiral metacomposite. Interestingly doubly negative effective density and modulus of the chiral metacomposite are found in a specific frequency range, where a pass band with negative group velocity is observed. Tuning of the resulting low-frequency bandgaps is then discussed by adjusting microstructure parameters of the metamaterial inclusion and lattice geometry. Specifically design of a metacomposite beam structure for the broadband low-frequency vibration suppression is demonstrated.     

Dispersive elastodynamics of 1D banded materials and structures: analysis

The elastodynamics of 1D periodic materials and finite structures comprising these materials are studied with particular emphasis on correlating their frequency-dependent characteristics and on elucidating their pass-band and stop-band behaviors. Dispersion relations are derived for periodic materials and are employed in a novel manner for computing both pass-band and stop-band complex mode shapes. Through simulations of harmonically induced wave motion within a finite number of unit cells, conformity of the frequency band structure between infinite and finite periodic systems is shown. In particular, only one or two unit cells of a periodic material could be sufficient for “frequency bandedness” to carry over from the infinite periodic case, and only three to four unit cells are necessary for the decay in normalized transmission within a stop band to practically saturate with an increase in the number of cells. Dominant speeds in the scattered wave field within the same finite set of unit cells are observed to match those of phase and group velocities of the infinite periodic material within the most active pass band. Dynamic response due to impulse excitation also is shown to capture the infinite periodic material dynamical characteristics. Finally, steady-state vibration analyses are conducted on a finite fully periodic structure revealing a conformity in the natural frequency spread to the frequency band layout of the infinite periodic material. The steady-state forced response is observed to exhibit mode localization patterns that resemble those of the infinite periodic medium, and it is shown that the maximum localized response under stop-band conditions could be significantly less than in an equivalent homogenous structure and the converse is true for pass-band conditions.     

Theoretical and Experimental Investigation of Flexural Vibration Transfer Properties of High-Pressure Periodic Pipe

According to the theory of phononic crystals,the hydraulic pipeline is designed to be a periodic structure composed of steel pipes and hoses to suppress the vibration of the hydraulic system with band gaps.We present theoretical and experimental investigations into the flexural vibration transfer properties of a high-pressure periodic pipe with the force on the inner pipe wall by oil pressure taken into consideration.The results show that the vibration attenuation of periodic pipe decreases along with the elevation of working pressure for the hydraulic system,and the band gaps in low frequency ranges move towards high frequency ranges.The periodic pipe has good vibration attenuation performance in the frequency range below 1000 Hz and the vibration of the hydrauhc system is effectively suppressed.All the results are validated by experiment.The experimental results show a good agreement with the numerical calculations,thus the flexural vibration transfer properties of the highpressure periodic pipe can be precisely calculated by taking the Quid structure interaction between the pipe and oil into consideration.This study provides an effective way for the vibration control of the hydraulic system.     

Galerkin method for steady-state response of nonlinear forced vibration of axially moving beams at supercritical speeds

The present paper investigates the steady-state periodic response of an axially moving viscoelastic beam in the supercritical speed range. The straight equilibrium configuration bifurcates in multiple equilibrium positions in the supercritical regime. It is assumed that the excitation of the forced vibration is spatially uniform and temporally harmonic. Under the quasi-static stretch assumption, a nonlinear integro-partial-differential equation governs the transverse motion of the axially moving beam. The equation is cast in the standard form of continuous gyroscopic systems via introducing a coordinate transform for non-trivial equilibrium configuration. For a beam constituted by the Kelvin model, the primary resonance is analyzed via the Galerkin method under the simply supported boundary conditions. Based on the Galerkin truncation, the finite difference schemes are developed to verify the results via the method of multiple scales. Numerical simulations demonstrate that the steady-state periodic responses exist in the transverse vibration and a resonance with a softening-type behavior occurs if the external load frequency approaches the linear natural frequency in the supercritical regime. The effects of the viscoelastic damping, external excitation amplitude, and nonlinearity on the steady-state response amplitude for the first mode are illustrated.     

An Analysis of Structural-Acoustic Coupling Band Gaps in a Fluid-Filled Periodic Pipe

A periodic pipe system composed of steel pipes and rubber hoses with the same inner radius is designed based on the theory of phononic crystals. Using the transfer matrix method, the band structure of the periodic pipe is calculated considering the structural-acoustic coupling. The results show that longitudinal vibration band gaps and acoustic band gaps can coexist in the fluid-filled periodic pipe. The formation of the band gap mechanism is further analyzed. The band gaps are validated by the sound transmission loss and vibration-frequency response functions calculated using the finite element method. The effect of the damp on the band gap is analyzed by calculating the complex band structure. The periodic pipe system can be used not only in the field of vibration reduction but also for noise elimination.     

Complete low-frequency bandgap in a two-dimensional phononic crystal with spindle-shaped inclusions

A two-dimensional phononic crystal(PC) structure possessing a relatively low frequency range of complete bandgap is presented. The structure is composed of periodic spindle-shaped plumbum inclusions in a rubber matrix which forms a square lattice. The dispersion relation, transmission spectrum and displacement field are studied using the finite element method in conjunction with the Bloch theorem. Numerical results show that the present PC structure can achieve a large complete bandgap in a relatively low frequency range compared with two inclusions of different materials, which is useful in low-frequency noise and vibration control and can be designed as a low frequency acoustic filter and waveguides. Moreover,the transmission spectrum and effective mass are evaluated to validate the obtained band structure. It is interesting to see that within the band gap the effective mass becomes negative, resulting in an imaginary wave speed and wave exponential attenuation. Finally, sensitivity analysis of the effect of geometrical parameters of the presented PC structure on the lowest bandgap is performed to investigate the variations of the bandgap width and frequency.     

LCR分流电路下压电声子晶体智能材料的带隙

将带有LCR分流电路的压电陶瓷片对贴在铝和环氧树脂组成的声子晶体结构中.使智能材料的机械振动与压电陶瓷的压电效应耦合起来,推导出机械振动在压电陶瓷片上的等效附加应力;使LCR分流电路中的电磁振荡效应和声子晶体的能带特性有机结合,计算了在分流电路作用下智能材料扭转和弯曲振动的带隙特性,研究了电阻、电感、电容元件的改变对压电声子晶体智能材料带隙的影响.研究结果表明:在合理尺寸下,随着分流电路中电阻值的增大,带隙的频率范围变宽,但衰减幅值有所降低;电感和电容值的增大都可以使带隙向低频移动,带隙的衰减幅值随着电感值的增大而升高,但随着电容值的增大而降低.从而给压电声子晶体智能材料减震降噪的控制提供了一种新思路.     

基于Timoshenko梁模型的周期充液管路弯曲振动带隙特性和传输特性

充液管路的固液耦合振动广泛存在于各种工程领域中,对其弯曲振动控制进行研究具有重要意义.将声子晶体的周期性思想引入到管路结构设计中,将管壁设计成沿轴向交替排列的周期性复合结构.基于Timoshenko梁模型,采用传递矩阵法计算了固液耦合条件下周期管路结构的弯曲振动能带结构及其传输特性,同时分析了材料阻尼系数、周期和非周期支撑对带隙特性的影响.充液周期管路结构的弯曲振动带隙特性为管路的振动控制提供了一条新的技术途径. 关键词： 声子晶体 充液管路 振动带隙