基于支持向量回归的patch近场声全息研究

为了解决patch近场声全息中全息数据外推问题,提出一种基于支持向量回归的一步式patch近场声全息技术。该方法首先把初始全息面上的数据当成训练样本进行学习,构造出回归函数,然后利用回归函数实现全息数据外推,最后基于统计最优近场声全息进行重建。数值仿真和实验研究的结果表明:在各个分析频率下,该方法都可以实现小孔径全息面的近场外推。从近场声全息重建结果看,即使初始全息数据受到噪声干扰,该方法也是一种有效的patch近场声全息技术。      

基于波叠加法的近场声全息空间分辨率增强方法

提出一种基于波叠加法的近场声全息空间分辨率增强方法. 该方法在波叠加法的基础上,利用全息面声压信号求得布置在全息面附近的虚源面上的简单源源强,再根据求得的简单源源强实现对全息面声压的插值,进而利用插值后的全息面声压数据进行重建. 该方法可以提高近场声全息重建图像的空间分辨率,减少测量工作量,简化测量过程. 通过仿真对影响插值结果的参数进行了分析,给出了合理的选取范围;通过仿真和实验研究验证了该方法的有效性. 关键词： 波叠加法 近场声全息 空间分辨率     

基于声压-振速测量的平面近场声全息实验研究

常规的近场声全息均是采用全息面声压或质点振速作为输入量求解,由于采用单一输入量无法分离来自全息面背向声波的干扰,因此要求所有声源均位于全息面的同一侧,即测量声场为自由声场,这种要求大大限制了近场声全息的实际应用.基于声压-速度测量的近场声全息以全息面上声压和质点振速同时作为输入量,通过建立和求解两侧声源在全息面上的声压和质点振速耦合关系,可以实现全息面两侧声波的分离,从而解决上述问题.文中在前期对声场分离技术研究的基础上,基于欧拉公式和有限差分近似,推导了新的基于声压-速度测量的平面近场声全息理论公式.随后通过实验检验了该方法在有背景源干扰情况下实现声场分离和重建的有效性.     

全息声压场的加权范数外推方法

全息声压外推是Patch近场声全息技术的关键步骤.本文提出了全息声压的加权范数外推方法,该方法首先通过实测声压数据的功率谱信息构造频域加权范数,然后通过极小化频域加权范数实现全息声压外推.由于外推过程中同时利用了声压信号的波数域带宽和波数谱形状信息,因此其外推结果优于传统带限外推方法.数值仿真结果表明,该方法无论在外推精度还是计算效率上都明显优于经典的全息声压波数域外推方法.刚性箱体上的声激励固支板声压外推实验进一步验证了该方法的有效性和实用性. 关键词： 近场声全息 全息声压外推 加权范数     

半自由声场的全息重建和预测实验研究

半自由声场环境下的声源重建和声场预测研究对声全息技术走向实际应用具有非常重要的意义.在提出基于分布源边界点法的半自由声场全息重建和预测方法的基础上，对此展开了实验研究.并将重建和预测的结果与常规方法重建和预测的结果进行了比较和讨论，说明了重建预测过程中反射声压的影响和考虑反射声压的必要性，证明了所提出方法在解决半自由声场环境下存在地面反射时的声源重建和声场预测时的有效性和准确性.还提出了采用奇异值截断滤波和Tikhonov正则化方法来削弱测量误差的影响，从而进一步优化了重建结果，提高了全息成像的可信度. 关键词： 声全息 半自由场 边界点 声辐射 反射声     

适用于循环平稳声场的基于波叠加法的近场声全息技术

在原有的平面循环平稳近场声全息基础上,提出一种基于波叠加法的循环平稳近场声全息技术,可以对具有复杂表面的声源进行全息重建,重建的声源表面声压谱相关密度函数能反映出调制信号的信息.声源表面声压谱相关密度函数全息图形象地反映了调制信号在表面的强弱分布情况,可由此确定调制信号源的产生位置.仿真分析和实验验证表明,基于波叠加法的循环平稳近场声全息技术可以更准确地反映循环平稳声场的调制特性.该方法继承了波叠加法的优点,无需计算边界奇异积分,计算效率高、精度好. 关键词： 近场声全息 循环平稳信号 波叠加     

适用于循环平稳声场的基于波叠加法的近场声全息技术

在原有的平面循环平稳近场声全息基础上，提出一种基于波叠加法的循环平稳近场声全息技术，可以对具有复杂表面的声源进行全息重建，重建的声源表面声压谱相关密度函数能反映出调制信号的信息.声源表面声压谱相关密度函数全息图形象地反映了调制信号在表面的强弱分布情况，可由此确定调制信号源的产生位置.仿真分析和实验验证表明，基于波叠加法的循环平稳近场声全息技术可以更准确地反映循环平稳声场的调制特性.该方法继承了波叠加法的优点，无需计算边界奇异积分，计算效率高、精度好.     

基于波叠加法的patch近场声全息及其实验研究

提出了基于波叠加法的patch近场声全息技术(PNAH).该方法首先通过线性叠加在振动体内部“虚置”的若干不同强度的简单源产生的波场来拟合实际声场，实现近场外推，然后采用计算简便的FFT方法进行全息重建.该方法解决了现有PNAH技术近场外推过程中存在的外推精度和计算效率问题，具有外推精度高、计算速度快、实现方法简单等特点，更适用于工程计算.为了验证本方法的正确性与有效性，将其用于单点激励固支板的全息实验中，取得了令人满意的结果.     

半自由声场的全息重建和预测技术研究

在半自由声场中,实际测量声压为直达声压和反射声压的叠加,而声压为标量,很难直接将其中直达声压成分分离出来,因而不能简单地用常规的方法来直接进行声源重建和声场预测。在充分地考虑到反射声压的情况下,建立了半自由声场环境下反射面为刚性和非刚性时的声场全息重建和预测理论模型,并通过实例验证了此模型的可行性和正确性。结果表明:此方法有效地解决了半自由声场中进行声场全息重建和预测时所存在的声压反射问题,从而扩充了声全息重建和预测技术的应用范围;采用分布源边界点法作为全息变换算法,提高了声全息重建和预测的速度、精度和稳定性。     

空间声场全息重建的波叠加方法研究

提出了基于波叠加法的近场声场全息技术，并将其用于任意形状物体的声辐射分析.在声辐射计算问题中，边界元法是通过离散边界面上的声学和位置变量来实现，而波叠加方法则通过叠加辐射体内部若干个简单源产生的声场来完成.因而，基于波叠加法的声全息就不存在边界面上的参数插值和奇异积分等问题，而这些问题是基于边界元法的声全息所固有的.与基于边界元法的声全息相比较，基于波叠加法的声全息在原理上更易于理解，在计算机上更容易实现.实验结果表明：该种全息技术在重建声场时，具有令人满意的重建精度. 关键词： 声全息 逆问题 波叠加方法 正则化方法     

Theoretical and experimental investigation of holographic reconstruction and prediction of multi-source hybrid acoustic field

Recently, NAH has been developed as an efficient tool for noise identification, noise localization and acoustic field visualization. Compared with the traditional acoustic ra-diation calculation problem, the solving problem in the NAH is an inverse acoustic problem. By measuring partial acoustic field information, such as complex pressures or particle velocities on the hologram surface, but not the surface normal velocities of the vibrating body, the surface information can be reconstructed,…     

Data extrapolation method for boundary element method-based near-field acoustical holography

A new data extrapolation method for boundary element method (BEM)-based near-field acoustical holography (NAH) is proposed to reduce an error of the reconstructed result obtained from the pressure measured on an aperture small compared with the structure. The finiteness of the measurement aperture is a serious impediment to actual large-scale implementation of NAH, because NAH requires the measurement of the pressure field over a complete surface of structure. To eliminate the requirement, the wave number-space data extrapolation method for fast Fourier transform (FFT)-based NAH has been proposed. In this paper, the extension of this data extrapolation method to BEM-based NAH is presented. The effectiveness of this method is demonstrated by experiments. The experiment results confirm that the reconstruction error is sufficiently suppressed by the proposed method.     

A one-step patch near-field acoustical holography procedure

When performing holography measurements over a limited area of a source, the hologram pressure typically remains finite at the edge of the measurement aperture. Patch near-field acoustical holography (NAH) has been developed specifically to mitigate the effects related to that windowing. In iterative patch NAH, the source distribution is reconstructed in two steps: first, the partially measured sound field is extended iteratively, and then the extended pressure is projected onto the source surface by using conventional NAH procedures. In the present work, a one-step procedure for performing that combined task is described. In this approach, the acoustical property to be reconstructed on a surface of interest is related to the partially measured pressure on the hologram surface in terms of sampling and bandlimiting matrices, and the reconstructed result is obtained by finding the regularized least squares solution of the latter relation; a procedure for determining the cutoff wave number of the bandlimiting matrix without a priori knowledge of the signal bandwidth is suggested. The proposed procedure was validated by using a synthetic sound field created by a point-driven, simply supported plated.     

长工作距离显微成像数字全息合成孔径方法(英文)

提出了一种用于长工作距离下显微成像的数字全息合成孔径方法。首先,在不同斜入射照明条件下记录多幅包含不同物光频谱范围的数字全息图。然后,利用每一幅全息图通过数字方法重构并放大物体强度像。最后,通过非相干叠加这些强度像得到分辨力提高且散斑噪声减小的合成物体强度像。理论分析和实验结果表明,此方法可应用于长工作距离下的原位显微观测。     

The measurement of 3-D asymmetric temperature field by using real time laser interferometric tomography

A real time nondestructive temperature measurement technique based on laser holographic interference tomography technique is presented. An He–Ne laser is used as light source, and a CCD video camera is used to grab the interferogram. This laser holographic tomography technique is applied to the measurement of the temperature fields generated by two heated rods. Since data error is inevitable in engineering measurement, it is necessary to study the reconstruction techniques for reconstructing the temperature field. Three techniques including convolution back projection (CBP), algebra reconstruction technique (ART) and simultaneous iterative reconstruction technique (SIRT) are studied. Based on the reconstruction techniques and experimental situation, ART is used to reconstruct the asymmetric temperature fields. The thermocouples are used to measure the temperatures of the two heated rods. Comparing the reconstructed result with the measured temperature value, a satisfactory result is obtained.     

Digital color holographic recording and reconstruction using synthetic aperture and multiple reference waves

This paper presents a method for recording and reconstructing high-quality digital color holographic images. The synthetic aperture technique is used to improve the resolution of the reconstructed image and also reduce the speckle size in the reconstruction plane. Subsequently, the multiple reference wave technique is used to suppress speckle noise in the reconstructed color holographic image by superposing speckle fields with different distributions. The final high-quality color holographic image is obtained due to the resolution improvement and speckle noise reduction achieved by the two techniques. Our method has potential applications in the digital color holographic displays.     

Light-in-flight holography for visualization and velocimetry in three-dimensional flows

Flow visualization and particle image velocimetry of deep volumes are achieved by holographic recordings. Light-in-flight holography is applied to avoid noise from out-of-focus regions during interrogation of the reconstructed image by use of a ruby laser source of small coherence. The scheme permits reconstruction of thin layers in depth without disturbance by the rest of the field. The location of the layers is selected by the position of a reconstructing slit aperture on the hologram. Applications to tracer particles in water and visualization by smoke of an air flow are given.     

高质量等曲率物参光像面数字全息显微系统

对等曲率物参光像面数字全息显微成像系统进行研究,分析了光路配置方法,推导了系统的点扩散函数,并由此指出了决定系统成像分辨率的因素及系统的成像特点,最后讨论了再现像光场一次位相畸变校正的方法.结果表明,等曲率物参光像面数字全息具有最大的信息容量;该系统的成像分辨率取决于显微物镜的数值孔径和CCD的像元大小,与CCD的光敏面尺寸无关;物体各点中通过显微物镜的所有频率成分均能被系统完全记录与再现,样品被照亮区域的大小对记录条件和再现像质没有影响;等曲率物参光像面数字全息系统是一种优化的全息记录与再现系统,利用该系统可以实现高质量成像.实验结果验证了理论分析的正确性.