(n,n)-(2n, 0)碳纳米管异质结的扭转力学特性

相近直径的锯齿型和扶手椅型碳纳米管可以共轴组合形成5-7碳环交替出现的柱形对称异质结. 本文利用分子动力学方法研究了直径相近且等长锯齿型和扶手椅型碳纳米管形成的(n, n)-(2n, 0)结在扭转过程中的扭矩和轴向应力随扭转角度的变化规律以及应力传递过程. 研究发现, (n, n)-(2n, 0)结扭转应变在达弹性限度内不会产生轴向应力, 该效应对基于碳纳米管扭转特性的纳米振荡器件的设计具有重要意义.     

单壁碳纳米管弹性性质的羟基接枝效应

用分子动力学方法研究了端口接枝不同数量羟基对扶手椅型和锯齿型单壁碳纳米管弹性模量的影响.结果表明,未接枝的扶手椅型(5, 5),(10,10)管和锯齿型(9, 0),(18, 0)管杨氏模量分别为948,901和804,860GPa.在接枝2—8个羟基情况下,锯齿型单壁碳纳米管拉伸杨氏模量基本不随接枝数量增加发生变化,而扶手椅单壁碳纳米管则不同,接枝状态下的弹性模量比未接枝状态小很多,但接枝一定数量后,其杨氏模量又略增到某一稳定值.分别从接枝后碳纳米管变形电子密度等值线结构、C—C键长和系统结合能变化规律等方面,对单壁碳纳米管弹性模量的接枝效应进行了分析. 关键词： 碳纳米管 羟基 接枝效应 杨氏模量     

碳纳米管量子点的电子输运

在紧束缚近似下,利用常量相互作用模型和Landauer-Bütticker公式,计算了扶手椅型和金属锯齿型碳纳米管量子点的电导。发现,根据碳纳米管量子点的长度的不同,扶手椅型碳纳米管量子点的电导可以具有两电子或四电子的壳层结构。而锯齿型碳纳米管量子点的电导却仅有四电子的壳层结构,与长度无关;这些理论结果与之前的实验结果符合的很好。     

卷曲效应对单壁碳纳米管电子结构的影响

利用计入卷曲效应的单壁碳纳米管(SWCNT)的能量色散关系,计算最低导带的电子速度及有效质量,并与不计入卷曲效应的结果进行了比较.计算结果表明:卷曲效应对电子速度及有效质量的影响与SWCNT的类型密切相关,金属锯齿型SWCNT对卷曲效应最为敏感,其次是扶手椅型SWCNT,最不敏感的是半导体锯齿型SWCNT.由此可以推断,卷曲效应对金属锯齿型SWCNT电子结构及低偏压输运特性影响最大,其次是扶手椅型SWCNT,影响最不明显的是半导体锯齿型SWCNT.这些结果与实验测量及密度泛函理论计算结果完全一致. 关键词： 单壁碳纳米管 卷曲效应 电子速度 电子有效质量     

单壁碳纳米扶手椅、锯齿管声子色散关系的计算

引用石墨经验力常数计算碳纳米管声子色散关系时，必须处理由二维平面卷曲形成三维实体纳米管所引入的问题. 报道对一系列扶手椅和锯齿单壁碳纳米管计及卷曲效应的声子色散关系的计算结果. 基于实际的数值计算结果，以及对单壁碳纳米扶手椅、锯齿管结构的对称性分析，讨论了Brillouin区中心Γ点晶格振动模的分类. 关键词： 碳纳米管 声子色散关系     

单壁碳纳米管杂化轨道计算

根据轨道杂化理论以及碳纳米管的几何结构,计算了(n,0),(n,n)和(n,m)三种单壁碳纳米管的杂化轨道,给出了杂化轨道s轨道成分和p轨道成分的解析式.对于管径较小的纳米管,锯齿型(n<40),扶手椅型(n<20),手性型(n<30,m相似文献   

空位结构缺陷对C纳米管弹性性质的影响

用分子动力学方法对不同空位缺陷的扶手椅型与锯齿型单壁C纳米管杨氏弹性模量进行了计算和分析. 结果表明：扶手椅型（5, 5）, （10,10）和锯齿型（9, 0）, （18, 0） 纳米管在无缺陷时其杨氏模量分别为948,901和804,860 GPa. 随管径的增大,扶手椅型和锯齿型单壁C纳米管弹性模量分别减小和增大,表现出完全不同的变化规律. 随着C纳米管中单点空位缺陷的均匀增加,杨氏模量下降,当缺陷比率增加到一定程度时,杨氏模量下降骤然趋缓,形成一下降平台;双空位缺陷对C纳米管杨氏模量的影响与其分布方向有关;随单点空位缺陷间原子数的增加,在轴向上,杨氏模量下降到某一值小幅波动,而在周向上杨氏模量先下降,然后上升到某一稳定值. 随两单点空位缺陷的空间距离进一步增大,杨氏模量又呈微降趋势. 通过分子间σ键与π键特征及缺陷间近程电子云耦合作用规律与空位缺陷内部5-1DB缺陷的形成特点等理论对上述规律进行了分析. 关键词： 空位缺陷 C纳米管 分子动力学 杨氏模量     

单壁碳纳米管杨氏模量的掺杂效应

用分子动力学方法研究了N,O,Si,P,S等5种杂质对扶手椅型(5，5)和锯齿型(9，0)单壁碳纳米管杨氏模量的影响.结果表明：直径为0.678和0.704 nm的扶手椅型(5，5)和锯齿型(9，0)碳纳米管在无掺杂时其杨氏模量分别为948和804 GPa.在掺杂浓度10％以下，碳纳米管的拉伸杨氏模量均随掺杂浓度增加近似呈线性下降规律，下降率以Si掺杂最大，N掺杂最小.对与C同周期的元素掺杂，随原子序数增加碳纳米管的杨氏模量下降率增大；与C不同周期的元素掺杂，碳纳米管的杨氏模量随掺杂浓度增加下降率更大，但 关键词： 碳纳米管 杂质 杨氏模量 分子动力学方法     

单壁纳米管的弹性性质

基于第一性原理计算了一系列单壁碳纳米管(椅型、锯齿型)和氮化硼锯齿型纳米管的杨氏模量.用实际的数值结果显示了杨氏模量与纳米管管径之间的依赖关系.还讨论了各类纳米管卷曲形变能以及平衡基矢长度a随管型的变化. 关键词： 单壁纳米管 平衡基矢长度 杨氏模量 形变能     

曲率效应对超小碳纳米管电子性质的影响

在考虑曲率效应的情况下,在螺旋坐标系下解析地推导了非手性的碳纳米管(SWNTs)(包括扶手椅型和锯齿型)的能量色散关系,并分析了曲率效应对超小扶手椅型SWNTs的能带、能隙和导电能力及其对超小锯齿型SWNTs(包括扶手椅型和锯齿型)的能隙的影响.     

Electronic transport through zigzag/armchair graphene nanoribbon heterojunctions

The electronic transport properties of a graphene nanoribbon (GNR) are known to be sensitive to its width, edges and defects. We investigate the electronic transport properties of a graphene nanoribbon heterojunction constructed by fusing a zigzag and an armchair graphene nanoribbon (zGNR/aGNR) side by side. First principles results reveal that the heterojunction can be either metallic or semiconducting, depending on the width of the nanoribbons. Intrinsic rectification behaviors have been observed, which are largely sensitive to the connection length between the zGNR and aGNR. The microscopic origins of the rectification behavior have been revealed. We find that the carrier type can alter from electrons to holes with the bias voltage changing from negative to positive; the asymmetrical transmission spectra of electrons and holes induced by the interface defects directly results in the rectification behavior. The results suggest that any methods which can enhance the asymmetry of the transmission spectra between holes and electrons could be used to improve the rectification behavior in the zGNR/aGNR heterojunction. Our findings could be useful for designing graphene based electronic devices.     

Low-energy electron transmission in a partially unzipped zigzag nanotube

Based on the nearest-neighbor tight-binding approximation, we present exact analytical expressions for electron transmission in nanotube/ribbon junctions, generated by incomplete unzipping of zigzag nanotubes. By assuming one-dimer-line difference in the widths of the leads, it is demonstrated that such a contact exhibits zero backscattering of low-energy electrons entering from the graphene side of the junction. We also show that a zigzag nanotube section sandwiched between two armchair graphene ribbons is completely transparent for incident low-energy electrons. Possible application of the results to nanosensor engineering is also included.     

Band-gap modulation of graphane-like SiC nanoribbons under uniaxial elastic strain

The band-gap modulation of zigzag and armchair graphane-like SiC nanoribbons (GSiCNs) under uniaxial elastic strain is investigated using the density functional theory. The results show that band gap of both structures all decreases when being compressed or tensed. In compression, both zigzag and armchair GSiCNs are semiconductors with a direct band gap. However, in tension, the armchair GSiCNs undergo a direct-to-indirect band-gap transition but the zigzag GSiCNs still have a direct band gap. These results are also proved by HSE06 method. This implies a potential application of the graphane-like SiC nanoribbons in the future pressure sensor and optical electronics nanodevices.     

锯齿型与扶手椅型碳化硅纳米管光电性质第一性原理研究

本文基于密度泛函理论计算分析了手性参数为(17,0)、(20,0)、(26,0) (10,10)、(12,12)、(15,15)的碳化硅纳米管的能带图,态密度及主要光学性质。结果表明：锯齿型与扶手椅型碳化硅纳米管均具有明显的半导体性质;在相近直径下,扶手椅型碳化硅纳米管带隙宽度要大于锯齿型碳化硅纳米管的带隙宽度;碳化硅纳米管的光吸收峰在100nm~200nm之间,可用于制作紫外线探测器件。     

形变碳纳米管场效应晶体管的电学性质

在紧束缚理论的基础上,推导出轴向拉伸和扭转形变时碳纳米管（CNT）的能带公式.结果显示拉伸和扭转形变都可以改变CNT的导电性质,在金属型和半导体型之间转变,特别是对于锯齿型CNT,根据n 与3的余数关系,在拉伸和扭转中分别显示出三种不同的变化规律.进一步应用场效应晶体管Natori理论模拟计算形变对CNT场效应晶体管的电流-电压特性的影响,锯齿型CNT根据n 与3的余数关系表现出不同的电流变化趋势,而对于扶手椅型CNT轴向拉伸不改变电流;在扭转形变时,CNT电流急剧升高,特别是扶手椅型CNT.锯齿型CNT和扶手椅型CNT的电流随扭转角度和外电压行为明显不同.在某些特定的扭转角度,电流随扭转角度变化非常显著,显示出锯齿型CNT和扶手椅型CNT发生半导体型与金属型之间的转变. 关键词： 碳纳米管 紧束缚理论 费米能级 能带结构     

Electronic transport across a junction between armchair graphene nanotube and zigzag nanoribbon

Based on the well known nearest-neighbor tight-binding approximation for graphene, an exact expression for the electronic conductance across a zigzag nanoribbon/armchair nanotube junction is presented for non-interacting electrons. The junction results from the removal of a half-row of zigzag dimers in armchair nanotube, or equivalently by partial rolling of zigzag nanoribbon and insertion of a half-row of zigzag dimers in between. From the former point of view, a discrete form of Dirichlet condition is imposed on a zigzag half-line of dimers assuming the vanishing of wave function outside the physical structure. A closed form expression is provided for the reflection and transmission moduli for the outgoing wave modes for each given electronic wave mode incident from either side of the junction. It is demonstrated that such a contact junction between the nanotube and nanoribbon exhibits negligible backscattering, and the transmission has been found to be nearly ballistic. In contrast to the previously reported studies for partially unzipped carbon nanotubes (CNTs), using the same tight binding model, it is found that due to the “defect” there is certain amount of mixing between the electronic wave modes with even and odd reflection symmetries. But the junction remains a perfect valley filter for CNTs at certain energy ranges. Applications aside from the electronic case, include wave propagation in quasi-one-dimensional honeycomb structures of graphene-like constitution. The paper includes several numerical calculations, analytical derivations, and graphical results, which complement the provision of succinct closed form expressions.     

Electromechanical buckling analysis of boron nitride nanotube using molecular dynamic simulation

In this paper, the effect of electric field on axial buckling of boron nitride nanotubes is investigated. For this purpose, molecular dynamics simulation and continuum mechanics are used for the first time simultaneously. In molecular dynamics simulation, the potential between boron nitride atoms is considered as Tersoff and Timoshenko beam theory is used in continuum mechanics. In this paper, buckling of zigzag and armchair boron nitride nanotubes are investigated. Here, the effects of the electric field and the length of the boron nitride nanotube on the critical load are investigated and it is shown that the effect of the electric field is different with respect to the arrangement of atoms in the boron nitride nanotubes. In fact, the electric field creates axial and torsional loads on the zigzag and armchair nanotube, respectively. Axial buckling of the zigzag nanotube is dependent on the electric field, whereas in the armchair nanotubes, the electric field changes have no effect on the axial buckling. To better understand the impact of the electric field on axial buckling, these results are compared with the continuum mechanics.     

Energy dissipation in gigahertz oscillators from multiwalled carbon nanotubes

Using atomistic models and molecular dynamics simulations, interlayer corrugation and resistant force in a biwalled carbon nanotube are shown to be strongly dependent upon the morphology combination of the bitube. Consequently, energy dissipation in a commensurate (e.g., armchair/armchair or zigzag/zigzag) bitube oscillator is found to be much larger than that in an incommensurate (e.g., zigzag/armchair) oscillator, resulting in a decay of oscillation amplitude within a few nanoseconds in the commensurate bitube and several tens of nanoseconds in the incommensurate bitube.     

Electronic properties of double-layer carbon nanotubes

The electronic spectra for double-wall zigzag and armchair nanotubes are found. The influence of nanotube curvatures on the electronic spectra is also calculated. Our finding that the outer shell is hole doped by the inner shell is in the difference between Fermi levels of individual shells which originate from the different hybridization of π orbital. The shift and rotation of the inner nanotube with respect to the outer nanotube are investigated. We found stable semimetal characteristics of the armchair DWNTs in regard of the shift and rotation of the inner nanotube. We predict the shift of k_F towards the bigger wave vectors with decreasing of the radius of the armchair nanotube.