声场中水力空化泡的动力学特性

以水为工作介质,考虑了液体黏性、表面张力、可压缩性及湍流作用等情况,对文丘里管反应器中空化泡在声场作用下的动力学行为特性进行了数值研究.分析了超声波频率、声压及喉径比对空化泡运动特性以及空化泡崩溃时所形成泡温以及压力脉冲的影响.结果表明,超声将水力空化泡运动调制成稳态空化,有利于增强空化效果. 关键词： 超声波 水力空化 湍流 气泡动力学     

液体薄层中的超声空化*

液体薄层中的超声空化,因其边界及所处空间的特殊性,而呈现出非常独特的空化结构和演化行为,在超声清洗、超声钎焊、表面处理、近场声悬浮、超声化学等领域都有所应用。该文梳理了近几年该课题组在液体薄层中的超声空化研究中的一些成果,力图揭示液体薄层内空泡、空化云、空化场的运动和分布规律,及其产生、发展和演化过程,以期对液体薄层中的超声空化行为有一个相对清晰和完整的认识。     

声-流耦合空化场观测与量化表征探索*

该文利用搭建的高速摄影和空化噪声同步观测的声-流耦合空化实验平台,观察分析了声-流耦合场中空化云的演化规律及相应的空化噪声特征。通过引入空化状态变量,给出了空化强度的一种新的明确表述,并提出了一种基于高速摄影图像分析来测量和表征空化状态变量及空化强度的方法。利用该方法进一步对声-流耦合空化时间演化周期性和空间强度分布进行了定量计算。结果表明,声-流耦合空化强度和作用范围相比单独声空化和单独水力空化有显著的提升。     

超声空化的电化学检测及混响场空化效应的研究

本文提出并设计了超声空化的电化学检测法，实现了通过分析样品的电学量变化来检测声空化，通过对混响场空化效应的研究，定性分析解释了混响场中空化饱和现象? ?     

超声空化现象影响因素的实验研究

超声空化在许多不同的学科和工业生产中有着广泛的应用。超声空化的应用与声场的分布及空化的机理密切相关,精准地反映空化场和空化机理是超声空化技术实际应用的关键。该文通过分析采集的声信号和金属箔膜空蚀法对空化区域随液位发生变化的现象进行研究,并利用Matlab对金属箔膜空蚀程度量化。实验发现,超声波会在液面与实验箱体底部形成驻波场。在某一液体温度下,随着液位高度的变化,超声空化现象的出现具有周期性。并且,在同一液位下,当超声功率改变时,空化区域强度分布情况随之改变。小功率时各空化区域空化强度分布均匀,当功率增大到一定时,会出现空化屏蔽现象。该研究为超声清洗设备的改良提供了借鉴,对进一步认识和利用超声空化效应具有重要意义。     

正则系综条件下空化空泡形成的分子动力学模拟

液体中空化现象的研究对减少空蚀破坏, 提高空化空泡的有效利用具有重要意义.本文采用分子动力学模拟的方法, 对正则系综条件下系统中空化的发生特性进行研究, 分析空化发生的机理, 讨论温度、数密度等因素对空化发生的影响, 并与格子Boltzmann方法进行了比较.模拟结果表明: 温度和数密度的变化, 都对系统中的空化产生显著影响.其中, 温度升高, 使系统中空化空泡的形成由稳定变得不稳定, 最终难以形成.数密度降低, 则会促进空化空泡的形成.随着数密度的减小, 温度对空化空泡形成的影响程度下降.     

双泡超声空化计算分析

将由速度势叠加原理得到的双泡超声空化动力学微分方程归一化,通过matlab语言编程计算,分析了水中空化泡的线度、双泡间距、声压幅值、声波频率等因素对空化过程的影响. 在双泡超声空化动力学微分方程中引入双频超声,探讨了双泡双频超声问题. 研究表明泡的线度是决定空化特性的主要因素,声压幅值对空化特性的影响最大,其次是超声波的频率;双泡间的相互作用影响空化特性,这种影响随双泡间距的增大而减弱;双频超声对双泡空化特性的影响有限,这种影响在两超声分量的声压幅值相等时较强. 关键词： 超声空化 双泡 双频超声     

声致空化简介

文章对强声波尤其是超声波通过液体介质时发生空化现象的成因及其作用作一简介.     

超声滚压中的空化现象*

在超声滚压加工中引入切削液后可能会产生空化现象,由此产生的微射流和冲击波对超声表面强化将有积极作用。为研究超声滚压加工中空化现象是否存在及空化效应在超声滚压中的作用,本文首先分析了超声滚压中的空化阈值,然后进行了染色法试验和超声滚压后试样氧元素能谱分析,最后通过超声滚压加工对比试验研究了空化效应对加工后材料表面粗糙度和显微硬度的影响。研究发现,超声滚压加工中的声压幅值远大于空化阈值,满足空化存在的必要条件;超声滚压中发生了明显的卡纸染色现象,引入切削液后工件超声滚压加工表面氧元素含量显著提高,表明超声滚压中发生了空化现象。超声滚压加工中的空化效应能进一步降低工件表面粗糙度和提高表面显微硬度,有利于提高工件表面强化质量。本研究为空化效应在超声滚压中的积极利用提供了依据。     

声场与电场作用下空化泡的动力学特性

以液体为工作介质, 利用空化泡的RP控制方程, 模拟分析了无量纲化的电场频率、场强的幅值以及无量纲化的声波频率、 声压幅值的变化对空化泡运动特性的影响. 结果表明: 声场和电场联合作用时, 空化泡运动处于混沌区域范围远高于两者单独作用下空化泡的混沌区域范围. 这不仅对声空化的进一步研究具有重要的理论意义, 而且对于提高和改进空化降解有机污染物的技术也具有指导意义.     

Origin of the broad-band noise in acoustic cavitation

The broad-band noise has been experimentally used to monitor the cavitation activity in a sonochemical reactor, an ultrasonic cleaning bath, a biological tissue, etc. However, the origin of the broad-band noise is still under debate. In the present review, two models for the mechanism of the broad-band noise are discussed. One is acoustic emissions from chaotically (non-periodically) pulsating bubbles. The other is acoustic emissions from bubbles with temporal fluctuation in the number of bubbles. It is suggested that the latter mechanism is sometimes dominant. Further studies are required on the role for bubble cluster dynamics as well as the bubble–bubble interaction in the broad-band noise especially at relatively low ultrasonic frequencies.     

The influence of air content in water on ultrasonic cavitation field

Cavitation is a complex physical phenomenon affected by many factors, one of which is the gas dissolved in the medium. Researchers have given some efforts to the influence of gas content on sonoluminescence or some specific chemical reactions in and around the bubble, but limited work has been reported about the influence on the ultrasonic cavitation field distribution. In this work, the intensity distribution of the ultrasound field in a cleaning tank has been measured with the hydrophone. After analysed and visualised by MATLAB software, it was found that the cavitation intensity distribution in degassed water was much better than that in tap water. And further study proved that degassing process can improve the cavitation effect dramatically both in intensity and scope. Finally, the cavitation fields in mediums with different gas content were measured and the specific influence of air content on cavitation field was discussed.     

Observations of water cavitation intensity under practical ultrasonic cleaning conditions

In the industrial cleaning processes either organic solvents or water solutions are used as the cleaning media. The primary causative factor of ultrasonic cleaning is cavitation. Below are presented results of investigations into the influence of temperature, gas content and the solution level in an ultrasonic cleaner on cavitation intensity in the tap water. Previous investigations have revealed a great deal of information on the influence of the above factors on the cavitation intensity and these are confirmed. It has now been found that the tap water reaches the highest cavitation intensity at temperatures below 20 degrees C but during heating at higher temperatures (20-40 degrees C) a second peak of cavitation intensity may appear-depending on the height of water in the bath and air content.     

A high-temperature acoustic field measurement and analysis system for determining cavitation intensity in ultrasonically solidified metallic alloys

A high-temperature acoustic field measurement and analysis system (HTAFS) was self-designed and developed to achieve real-time acoustic field analysis and quantitative cavitation characterization within high-temperature liquids. The acoustic signal was acquired by a high-temperature resistant waveguide and calibrated by separate compensation of line and continuous spectra to eliminate frequency offsets. Moreover, a new method was proposed to derive from the continuous-spectrum sound intensity and line-spectrum sound intensity in the frequency band above 1.5 times the fundamental frequency to characterize the intensity of transient cavitation and stable cavitation. The acoustic field characteristics within solidifying liquid Al-7 %Si alloy were successfully determined by this system. With the increase of ultrasound amplitude, the acoustic pressure in the alloy melt increased to be stable, the transient cavitation intensity first rose and then declined, and the stable cavitation intensity remained unchanged. Combined with the structural evolution of the primary α(Al) phase, the transient cavitation intensity was determined to be the dominant factor for the ultrasound-induced grain refinement effect.     

Studies of a novel sensor for assessing the spatial distribution of cavitation activity within ultrasonic cleaning vessels

This paper describes investigations of the spatial distribution of cavitation activity generated within an ultrasonic cleaning vessel, undertaken using a novel cavitation sensor concept. The new sensor monitors high frequency acoustic emissions (>1 MHz) generated by micron-sized bubbles driven into acoustic cavitation by the applied acoustic field. Novel design features of the sensor, including its hollow, cylindrical shape, provide the sensor with spatial resolution, enabling it to associate the megahertz acoustic emissions produced by the cavitating bubbles with specific regions of space within the vessel. The performance of the new sensor has been tested using a 40 kHz ultrasonic cleaner employing four transducers and operating at a nominal electrical power of 140 W under controlled conditions. The results demonstrate the ability of the sensors to identify 'hot-spots' and 'cold-spots' in cavitation activity within the vessel, and show good qualitative agreement with an assessment of the spatial distribution of cavitation determined through erosion monitoring of thin sheets of aluminium foil. The implications of the studies for the development of reliable methods of quantifying the performance of cleaning vessels are discussed in detail.     

Bubble population phenomena in acoustic cavitation

Theoretical treatments of the dynamics of a single bubble in a pressure field have been undertaken for many decades. Although there is still scope for progress, there now exists a solid theoretical basis for the dynamics of a single bubble. This has enabled useful classifications to be established, including the distinction between stable cavitation (where a bubble pulsates for many cycles) and transient cavitation (where the bubble grows extensively over time-scales of the order of the acoustic cycle, and then undergoes an energetic collapse and subsequent rebound and then, potentially, either fragmentation, decaying oscillation or a repeat performance). Departures from sphericity, such as shape and surface oscillations and jetting, have also been characterized. However, in most practical systems involving high-energy cavitation (such as those involving sonochemical, biological and erosive effects), the bubbles do not behave as the isolated entities modelled by this single-bubble theory: the cavitational effect may be dominated by the characteristics of the entire bubble population, which may influence, and be influenced by, the sound field.

The well established concepts that have resulted from the single-bubble theory must be reinterpreted in teh light of the bubble population, an appreciation of population mechanisms being necessary to apply our understanding of single-bubble theory to many practical applications of ‘power’ ultrasound. Even at a most basic level these single-bubble theories describe the response of the bubble to the local sound field at the position of the bubble, and that pressure field will be influenced by the way sound is scattered by neighbouring bubbles. The influence of the bubble population will often go further, a non-uniform sound field creating an inhomogeneous bubble distribution. Such a distribution can scatter, channel and focus ultrasonic beams, can acoustically shield regions of the sample, and elsewhere localize the cavitational activity to discrete ‘hot spots’. As a result, portions of the sample may undergo intense sonochemical activity, degassing, erosion, etc., whilst other areas remain relatively unaffected. Techniques exist to control such situations where they are desirable, and to eliminate this localization where a more uniform treatment of the sample is desired.     

The influence of pressure on the acoustic cavitation in saturated CO2-expanded N,N-dimethylformamide

CO₂-expanded organic solvent is a kind of important fluid medium and has broad applications in chemical industry, environmental protection and other fields. Ultrasonic cavitation in gas expanded liquids (GXLs) is conducive to enhancing mass transfer and producing many exciting phenomena. In this paper, the ultrasonic cavitations and streaming in the saturated CO₂-expanded liquid N, N-dimethylformamide (DMF) at 4.2 MPa and 5.2 MPa are observed by a high-speed camera. The cavitation intensity and time trace of pressure pulses are recorded using a PZT hydrophone. The influences of gas–liquid equilibrium pressure and ultrasonic power on the cluster dynamics of transient and stable cavitation are examined. The excess molar enthalpies required for CO₂ dissociation from DMF are calculated by Peng-Robinson equations of state and the change of surface free energy of CO₂-expanded DMF is predicted. The results show that the excess enthalpy of the mixture is one of the key factors to control ultrasonic cavitation at high pressurized conditions, while the surface tension is the key factor for low pressure. As the increase of applied ultrasonic power, the formation and collapsing frequency of bubble clusters increases, and the amplitude and cyclic frequency of pressure pulse are enhanced. The transient cavitation intensity increases as it reaches a maximum value at a certain ultrasonic power and then decreases. The change trends of stable cavitation intensity under different pressures are basically same. It can be concluded from the evidence that ultrasonic cavitation in CO₂-expanded DMF is affected by the combined effect of compression and substitution: compression depresses the nucleation and growth of bubbles, while the high solubility of CO₂ in DMF is conducive to the generation of bubbles in cavitation.     

Physical and chemical effects of acoustic cavitation in selected ultrasonic cleaning applications

Acoustic cavitation in a liquid medium generates several physical and chemical effects. The oscillation and collapse of cavitation bubbles, driven at low ultrasonic frequencies (e.g., 20 kHz), can generate strong shear forces, microjets, microstreaming and shockwaves. Such strong physical forces have been used in cleaning and flux improvement of ultrafiltration processes. These physical effects have also been shown to deactivate pathogens. The efficiency of deactivation of pathogens is not only dependent on ultrasonic experimental parameters, but also on the properties of the pathogens themselves. Bacteria with thick shell wall are found to be resistant to ultrasonic deactivation process. Some evidence does suggest that the chemical effects (radicals) of acoustic cavitation are also effective in deactivating pathogens. Another aspect of cleaning, namely, purification of water contaminated with organic and inorganic pollutants, has also been discussed in detail. Strong oxidising agents produced within acoustic cavitation bubbles could be used to degrade organic pollutants and convert toxic inorganic pollutants to less harmful substances. The effect of ultrasonic frequency and surface activity of solutes on the sonochemical degradation efficiency has also been discussed in this overview.     

Effect of gold nanoparticle size on acoustic cavitation using chemical dosimetry method

When a liquid is irradiated with high intensities of ultrasound irradiation, acoustic cavitation occurs. Acoustic cavitation generates free radicals from the breakdown of water and other molecules. Cavitation can be fatal to cells and is utilized to destroy cancer tumors. The existence of particles in liquid provides nucleation sites for cavitation bubbles and leads to decrease the ultrasonic intensity threshold needed for cavitation onset. In the present investigation, the effect of gold nanoparticles with appropriate amount and size on the acoustic cavitation activity has been shown by determining hydroxyl radicals in terephthalic acid solutions containing 15, 20, 28 and 35 nm gold nanoparticles sizes by using 1 MHz low level ultrasound. The effect of sonication intensity in hydroxyl radical production was considered.The recorded fluorescence signal in terephthalic acid solutions containing gold nanoparticles was considerably higher than the terephthalic acid solutions without gold nanoparticles at different intensities of ultrasound irradiation. Also, the results showed that the recorded fluorescence signal intensity in terephthalic acid solution containing finer size of gold nanoparticles was lower than the terephthalic acid solutions containing larger size of gold nanoparticles. Acoustic cavitation in the presence of gold nanoparticles can be used as a way for improving therapeutic effects on the tumors.