Sr2+掺杂荧光粉Ca2Nb2O7：Eu3+的发光特性

采用高温固相法制备出Ca_1.97-xSr_xNb₂O₇：3%Eu³⁺（x=0.10,0.50,1.0,1.5,1.97）红色荧光粉,研究了Ca_1.97-xSr_xNb₂O₇：3%Eu³⁺的发光特性及Sr²⁺的浓度对该荧光粉发光性质的影响。随着Sr²⁺浓度的改变,Ca_2-xSr_xNb₂O₇：Eu³⁺的XRD呈现不同的相。Ca_1.97Nb₂O₇：3%Eu³⁺（x=0）的激发光谱中,302 nm附近的强宽带来自于O^2-→Eu³⁺电荷转移跃迁,272 nm附近的肩峰来自于NbO^7-₆基团的电荷转移跃迁,350~600 nm范围内的锐锋属于Eu³⁺的特征4f-4f组内跃迁。在398 nm激发下,发射光谱的最强峰位于616 nm,属于Eu³⁺的⁵D₀→⁷F₂电偶极跃迁,发射出强烈的红光。当Ca²⁺逐渐被Sr²⁺取代时,Ca_2-xSr_xNb₂O₇：Eu³⁺的各激发峰的强度先提高后降低,且O^2-→Eu³⁺电荷转移跃迁发生明显红移。少量Sr²⁺的掺杂可以有效提高Ca_2-xSr_xNb₂O₇：Eu³⁺ 的红光发射强度,当x=0.01时该荧光粉的红光发射达到最强,可以被紫外LED芯片激发。     

Eu2+掺杂CaSi2O2N2荧光粉发光性能

采用固相反应法合成了组成为Ca_1-xEu_xSi₂O₂N₂的Eu²⁺掺杂CaSi₂O₂N₂荧光粉.通过荧光光谱对样品的发光性能进行了研究,发现Eu²⁺掺杂CaSi₂O₂N₂荧光粉发射光谱为宽波段的单峰结构,主要包含绿光和黄光区,发射峰在556~568 nm.从发射光谱的宽带特征来看,CaSi₂O₂N₂:Eu²⁺的发射主要对应着Eu²⁺离子4f⁶5d→4f⁷跃迁.从激发光谱所覆盖的范围还可以看到,样品可以有效的被UV蓝-光激发,这意味着该类荧光粉在白光LED方面有可能得到广泛的应用.另外,样品的发光性能与激发离子的浓度有着很大关系.激发离子浓度增大时,发射光谱会发生明显红移.利用这一性质,可以通过改变Eu²⁺浓度来调节荧光粉的发光范围,从而满足不同场合的需要.同时,Eu²⁺浓度提高,样品发射光谱的强度也会随之增强,在x=0.06时发射强度达到最大值,之后继续增加Eu²⁺浓度,强度不仅没有增加反而降低,即出现浓度猝灭现象.     

Bi3+掺杂对Sr2MgSi2O7∶Eu2+荧光粉的结构及发光性能的影响

采用溶胶-凝胶法在还原气氛下制备了Sr₂MgSi₂O₇∶Eu²⁺,xBi³⁺(x=0,0.02,0.04,0.06,0.08,0.1)荧光粉,并用XRD、TG-DTA及激发与发射谱仪对样品的结构及发光性能进行了表征。结果发现:单掺杂Bi³⁺的Sr₂MgSi₂O₇样品的发射光谱所用的材料的激发光谱为一主峰为286 nm的宽带谱,这是由于激发态时Bi³⁺的³P₁→¹S₀电子能级跃迁而造成的;单掺杂Eu²⁺的Sr₂MgSi₂O₇样品的发射光谱所用的材料的激发光谱为一主峰为358 nm的宽带谱,这是典型的Eu²⁺的4f⁶5d¹→4f⁷跃迁而引起的。当Bi³⁺离子掺杂到Sr₂MgSi₂O₇∶Eu²⁺样品的摩尔分数为0.04时,样品的发射强度是未掺杂Bi³⁺离子样品的1.9倍。     

蓝色长余辉材料Sr2MgSi2O7：Eu2+,Dy3+及其基质的VUV-UV激发特性

Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺是一种有效的蓝色长余辉材料,采用高温固相法合成了Sr₂MgSi₂O₇,Sr₂MgSi₂O₇:Dy³⁺,Sr₂MgSi₂O₇:Eu²⁺及Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺,利用同步辐射研究了它们的VUV-UV激发特性.在真空紫外光激发下,在基质中发现了稍弱的位于385nm的发射带,在双掺杂的样品中,除了Eu²⁺的4f5d→4f发射带(465nm)外,还观察到了575nm处的发射峰;通过和Dy³⁺单掺杂样品的发射谱比较,发现它是来自于Dy³⁺的4f-4f(⁴F_9/2→6H_13/2)跃迁.在它们的激发谱上可以看出Dy³⁺与基质发射的有效激发均处于真空紫外区,在近紫外及可见区激发下未见到它们发光.另外在Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺中观察到Dy³⁺的发射也说明了Dy³⁺在该类长余辉材料中不仅作为陷阱用来延长余辉,而且也以发光中心形式存在于基质中.     

Sr2MgSi2O7∶Eu2+,Eu3+发光性能及颜色调控

采用静电纺丝法在不同气氛下制备了Sr₂MgSi₂O₇∶Eu²⁺,Eu³⁺纤维,研究其晶体结构和形貌;将纤维与聚二甲基硅氧烷(PDMS)复合后获得Sr₂MgSi₂O₇∶Eu²⁺,Eu³⁺-PDMS复合材料,研究其光致发光和应力发光性能。研究结果显示,氮气、空气下制备样品的XPS图谱同时出现Eu²⁺和Eu³⁺结合能特征峰;在360 nm和395 nm激发下复合材料的光致发光光谱中,不但有Eu²⁺位于469 nm处的蓝色宽带发射,还包含Eu³⁺位于615 nm的多个红色窄带发射。因为Eu³⁺在电荷补偿下还原成Eu²⁺并在刚性结构保护下不被氧化,证实了Eu³⁺在Sr₂MgSi₂O     

Li+和Er3+掺杂对Ba2SiO4：Eu2+发光性能的影响

采用化学沉淀法一次煅烧工艺制备了Ba_1.99-x/2-2ySiO₄:Eu_0.01²⁺, Li_x+y²⁺, Eu_y³⁺绿色荧光粉, 用X射线衍射仪和荧光分光光度计对样品的晶体结构、发光性能进行表征. 结果表明: 少量Eu²⁺, Li⁺和Er³⁺的共掺杂没有改变晶体结构; 其激发光谱分布在270–440 nm波长范围, 谱峰位于288 nm, 360 nm处, 可以被InGaN 管芯产生的360–410 nm辐射有效激发; 在360 nm近紫外光激发下, 测得其发射光谱峰值在500 nm 处, 是Eu²⁺4f⁶5d¹→4f⁷跃迁的典型发射; 荧光粉发光强度随着Li⁺掺杂量的增大先增强, 后减弱, 当x=0.1时, 发光强度最大; 随着Li⁺, Er³⁺共掺杂量的增加(y=0.012), 出现位于530 nm和488 nm的发射峰, 对应于Er³⁺的²H_11/2→⁴I_15/2和⁴F_7/2→⁴I_15/2特征发射, 同时分析了Eu²⁺→Er³⁺的能量传递过程. 关键词： 化学沉淀法 2SiO₄：Eu²⁺,Li⁺,Er³⁺')" href="#">Ba₂SiO₄：Eu²⁺,Li⁺,Er³⁺ 能量传递 发光性能     

Eu3+激活K2CaP2O7荧光粉的制备和发光性质

采用高温固相法制备了系列不同浓度Eu³⁺离子掺杂的K₂CaP₂O₇红色荧光粉。通过X射线衍射、扫描电子显微镜、荧光光谱和荧光寿命曲线等手段对荧光粉的物相结构、形貌以及发光性质进行了研究。结果表明所制备的荧光粉均属于单斜结构,Eu³⁺离子掺杂没有引起晶体结构明显变化,荧光粉形貌不规则,颗粒为微米量级且部分发生团聚。在393 nm紫外光激发下,荧光粉显示出红光发射,最强发射峰位于613 nm。Eu³⁺离子掺杂浓度对发光强度有显著影响,最佳掺杂摩尔分数为0.08,由此计算能量传递临界距离为1.61 nm。荧光寿命受掺杂浓度影响较小,当Eu³⁺掺杂摩尔分数为0.005~0.10时,荧光寿命在2.45~2.58 ms范围内。变温发射光谱显示,测试温度为150℃时,荧光粉的发光强度为室温的73%。研究表明,Eu³⁺离子掺杂的K₂CaP₂O₇是性能较好的红色荧光粉。     

低温燃烧法制备SrMgAl10O17：Eu2+,Er3+高亮度蓝光荧光粉及发光性能研究

采用低温燃烧法合成SrMgAl₁₀O₁₇:Eu²⁺及SrMgAl₁₀O₁₇:Eu²⁺, Er³⁺蓝色发光材料, 通过X射线衍射仪 (XRD)、扫描电子显微镜 (SEM) 和荧光光谱仪 (PL) 等测试手段对所得样品进行表征. XRD及SEM测试结果表明: 利用低温燃烧法合成SrMgAl₁₀O₁₇材料具有较高的结晶度, 且微量的稀土元素掺杂不会破坏其晶体结构; PL测试结果表明: SrMgAl₁₀O₁₇:Eu²⁺ 荧光粉在300–390 nm范围内可以被有效的激发, 该波长范围与近紫外LED芯片匹配, 发射光谱分布在430–520 nm之间, 发射峰位于460 nm, 属蓝光发射材料. 共掺Er³⁺可显著增强SrMgAl₁₀O₁₇:Eu²⁺的发光强度, 且当Er³⁺的掺杂浓度为4%时,样品的发光强度最大, 较单掺Eu²⁺时样品的发光强度高出54.9%, 表明Er³⁺对Eu²⁺的发光具有良好的敏化作用, 该敏化作用的机理可以利用能量传递原理进行解释. 关键词： 低温燃烧法 10O₁₇')" href="#">SrMgAl₁₀O₁₇ 蓝光荧光粉 敏化作用     

Ca2Li2BiV3O12∶Eu3+荧光粉的制备和发光性能

采用高温固相法成功合成了一种可用于白光LED的Ca₂Li₂BiV₃O₁₂∶Eu³⁺新型红色荧光粉,使用X射线衍射仪和荧光分光光度计对合成样品进行了表征,研究了合成温度和Eu³⁺含量对合成样品相组成和发光性能的影响。结果表明,采用高温固相法在650~700 ℃能合成纯度较高、结晶度好的Ca₂Li₂BiV₃O₁₂∶Eu³⁺荧光粉,合成样品激发带覆盖200~400 nm,发射光谱的线状发射峰可归属于Eu³⁺的⁵D₀→⁷F_J(J= 1, 2, 3,4)特征锐线发射,Eu³⁺摩尔分数为14%时荧光粉的发光强度最大。     

CaMoO4：Eu3+,Bi3+,Li+红色荧光粉的共沉淀制备与表征

采用共沉淀法合成了红色荧光粉Ca_0.75MoO₄：Eu_0.25³⁺、Ca_0.75MoO₄：Eu_0.25-x³⁺,Bi_x³⁺及Ca_0.5MoO₄：Eu_0.25-2x³⁺, Bi_x³⁺,Li_0.25+x⁺,并采用X射线衍射(XRD)、拉曼光谱,扫描电镜(SEM)和荧光光谱(PL)测定分析了其结构形貌特征及发光性能。结果表明：制备的CaMoO₄：Eu³⁺,Bi³⁺,Li⁺红色荧光粉为白钨矿结构,颗粒尺寸约为0.5~1 μm。掺杂Bi³⁺的Ca_0.75MoO₄：Eu_0.25-x³⁺,Bi_x³⁺的相对发光强度明显高于未掺Bi³⁺的Ca_0.75MoO₄：Eu_0.25³⁺荧光粉。Bi³⁺离子的掺杂将吸收来的能量传递给激活离子Eu³⁺,起到了能量传递的作用。当Bi³⁺掺杂量为x=0.005时,在395 nm激发下,主发射峰在616 nm处的相对发光强度最大,但掺杂浓度过高时会出现浓度猝灭现象。另外,电荷补偿剂的掺入能够解决材料中因同晶取代引起的电荷不平衡的问题,以Li⁺作电荷补偿剂、Eu³⁺和 Bi³⁺共掺合成的Ca_0.5MoO₄：Eu³⁺_0.23,Bi_0.01³⁺,Li⁺_0.26红色荧光粉的发光性能强于Ca_0.75MoO₄：Eu_0.25³⁺、Ca_0.5MoO₄：Eu_0.25³⁺, Li_0.25⁺及Ca_0.75MoO₄：Eu_0.24³⁺,Bi_0.01³⁺。     

Sr和Ba替代对Eu掺杂Ca2.955Si2O7的结构和发光特性的影响研究

利用固相反应法制备了Sr和Ba替代的Ca_2.955-xM_xSi₂O₇: 0.045Eu²⁺ (M= Sr, Ba, x= 0.1-0.5)系列荧光粉, 利用较大离子半径的Sr和Ba元素替代Eu掺杂Ca_2.955-xM_xSi₂O₇ 中的Ca元素,研究Sr和Ba替代对样品结构和发光特性的影响. X射线衍射测试结果表明,少量Sr和Ba替代不会改变基质的晶体结构, 样品仍然为单斜晶系.未替代前, Ca_2.955Si₂O₇: 0.045Eu²⁺ 样品的发射峰在574 nm左右,随着Sr含量的增加,样品的发射峰发生蓝移; 而Ba含量在x= 0.1-0.4时不会引起发射峰位置的移动, 但x= 0.5样品的发射峰发生蓝移.同等含量的Sr和Ba部分替代样品中的Ca元素, Ba替代样品的光谱强度较强.     

Synthesis and luminous characteristics of Ba2MgSi2−xAlxO7: 0.1Eu, 0.1Mn phosphor for WLED

The shift of the emission band to longer wavelength (yellow-orange) of the Ba₂MgSi_2−xAl_xO₇: 0.1Eu²⁺ phosphor under the 350-450 nm excitation range has been achieved by adding the codoping element (Mn²⁺) in the host. The single-host silicate phosphor for WLED, Ba₂MgSi_2−xAl_xO₇: 0.1Eu²⁺, 0.1Mn²⁺ was prepared by high-temperature solid-state reaction. It was found experimentally that, its three-color emission peaks are situated at 623, 501 and 438 nm, respectively, under excitation of 350-450 nm irradiation. The emission peaks at 438 and 501 nm originate from the transition 5d to 4f of Eu²⁺ ions that occupy the two Ba²⁺ sites in the crystal of Ba₂MgSi_2−x Al_xO₇, while the 623 nm emission is attributed to the energy transfer from Eu²⁺ ions to Mn²⁺ ions. The white light can be obtained by mixing the three emission colors of blue (438 nm), green (501 nm) and red (623 nm) in the single host. When the concentrations of the Al³⁺, Eu²⁺ and Mn²⁺ ions were 0.4, 0.1 and 0.1 mol, respectively, the sample presented intense white emission. The addition of Al ion to the host leads to a substantial change of intensity ratio between blue and green emissions. White light could be obtained by combining this phosphor with 405 nm light-emitting diodes. The near-ultraviolet GaN-based Ba₂MgSi_1.7 Al_0.3O₇: 0.1Eu²⁺, 0.1Mn²⁺ LED achieves good color rendering of over 85.     

白光LED用LiBaBO3:Eu2+材料发光特性研究

采用高温固相法制备了LiBaBO₃:Eu²⁺绿色发光材料.测量了Eu²⁺浓度为1mol%时样品的激发与发射光谱,其发射光谱为双峰宽谱,主峰分别为482和507nm,与理论计算值符合很好;监测482nm发射峰时,对应激发光谱的峰值为287和365nm,监测507nm发射峰时,对应的激发峰为365和405nm.研究了Eu²⁺浓度对材料发射光谱的影响,结果显示,随Eu²⁺浓度的增大,蓝、绿发射峰均发生了     

Photoluminescence properties of Sr1-xSi2O2N2: Eux as green to yellow-emitting phosphor for blue pumped white LEDs

This study evaluated potential applications of green to yellow-emitting phosphors (Sr_1−xSi₂O₂N₂: Eu²⁺_x) in blue pumped white light emitting diodes. Sr_1-xSi₂O₂N₂: Eu²⁺_x was synthesized at different Eu²⁺ doping concentrations at 1450 °C for 5 h under a reducing nitrogen atmosphere containing 5% H₂ using a conventional solid reaction method. The X-ray diffraction patterns of the prepared phosphor (Sr_1-xSi₂O₂N₂: Eu²⁺_x) were indexed to the SrSi₂O₂N₂ phase and an unknown intermediate phase. The photoluminescence properties of these phosphors (Sr_1−xSi₂O₂N₂: Eu²⁺_x) showed that the samples were excited from the UV to visible region due to the strong crystal field splitting of the Eu²⁺ ion. The emission spectra under excitation of 450 nm showed a bright color at 545-561 nm. The emission intensity increased gradually with increasing Eu²⁺ doping concentration ratio from 0.05 to 0.15. However, the emission intensity decreased suddenly when the Eu²⁺ concentration ratio was >0.2. As the doping concentration of Eu²⁺ was increased, there was a red shift in the continuous emission peak. These results suggest that Sr_1-xSi₂O₂N₂: Eu₂⁺_x phosphor can be used in blue-pumped white light emitting diodes.     

Eu$lt;sup$gt;2+$lt;/sup$gt;的掺杂浓度对BaAl$lt;sub$gt;2$lt;/sub$gt;Si$lt;sub$gt;2$lt;/sub$gt;O$lt;sub$gt;8$lt;/sub$gt;：Eu$lt;sup$gt;2+$lt;/sup$gt;荧光粉发光特性的影响

采用化学共沉淀法一次煅烧工艺合成了BaAl₂Si₂O₈：Eu²⁺蓝色荧光粉.用X射线衍射仪和荧光分光光度计等对BaAl₂Si₂O₈：Eu²⁺蓝色荧光粉的相结构、发光性能进行了测试.结果表明：化学共沉淀法一次煅烧工艺合成的BaAl₂Si₂O₈：Eu²⁺蓝色荧光粉为单相;其激发光谱分布在240—410 nm的波长范围,峰值位于320 nm处,可以被InGaN管芯产生的350—410 nm辐射有效激发;在365 nm近紫外光的激发下,测得其发射光谱是位于465 nm附近的宽带峰.BaAl₂Si₂O₈：Eu²⁺蓝色荧光粉的发光强度随Eu²⁺浓度的增大逐渐加强,当Eu²⁺掺杂的摩尔分数为3.5%时,发光强度达到最大值,而后随掺杂浓度的增加而减小,发生浓度猝灭;根据Dexter能量共振理论,该浓度猝灭是由于Eu²⁺的离子间交换相互作用引起的. 关键词： 2Si₂O₈：Eu²⁺')" href="#">BaAl₂Si₂O₈：Eu²⁺ 发光特性 蓝色荧光粉 化学共沉淀法     

用于白光LED的单一基质白光荧光粉Ca2SiO3Cl2:Eu2+，Mn2+的发光性质

用高温固相法合成了Eu²⁺，Mn²⁺共激活的Ca₂SiO₃Cl₂高亮度白色发光材料，并对其发光性质进行了研究. 该荧光粉在近紫外光激发下发出强的白色荧光，Eu^{2+中心形成峰值为419 nm和498 nm的特征宽带，通过Eu2+中心向Mn2+中心的能量传递导致了峰值为578 nm的发射，三个谱带叠加从而在单一基质中得到了白光. 激发光谱均分布在250—415 nm的波长范围，红绿蓝三个发射带的激发谱峰值分别位于385 nm，412 nm，370 nm和396 nm处，可以被InGaN管芯产生的紫外辐射有效激发. Ca₂SiO₃Cl₂:Eu2+，Mn2+是一种很有前途的单一基质白光LED荧光粉.}     

The concentration quenching and crystallographic sites of Eu2+ in Ca2BO3Cl

A yellow phosphor, Ca2BO3CI：Eu2＋, is prepared by the high-temperature solid-state method. Under the condition of excitation sources ranging from ultraviolet to visible light, efficient yellow emission can be observed. The emission spectrum shows an asymmetrical single intensive band centred at 573 nm, which corresponds to the 4f65dl→4f7 transition of Eu2＋. Eu2＋ ions occupy two types of Ca2＋ sites in the Ca2BO3C1 lattice and form two corresponding emission centres, respectively, which lead to the asymmetrical emission of Eu2＋ in Ca2BO3C1. The emission intensity of Eu2＋ in Ca2BO3C1 is influenced by the Eu2＋ doping concentration. Concentration quenching is discovered, and its mechanism is verified to be a dipole-dipole interaction. The value of the critical transfer distance is calculated to be 2.166 nm, which is in good agreement with the 2.120 nm value derived from the experimental data.     

Synthesis and luminescence properties of green phosphors Ca6Sr4(Si2O7)3Cl2:Eu2+ for white light emitting diodes

Divalent europium-activated chlorosilicate Ca₆Sr₄(Si₂O₇)₃Cl₂:Eu²⁺ phosphors were synthesized by a conventional solid-state reaction under reductive atmosphere. These phosphors can be efficiently excited by UV–visible light from 320 to 420 nm, which matches that of a near UV-emitting InGaN chip. Under the 360 nm excitation, Ca₆Sr_3.97(Si₂O₇)₃Cl₂:0.03Eu²⁺ phosphor shows a strong and broad emission centering at 515 nm, which is attributed to the 5d→4f transition of Eu²⁺ ion. The mechanism of concentration quenching was determined to be the dipole–dipole interaction and the critical energy-transfer distance of Eu²⁺ was calculated as 3.31 nm. The CIE chromaticity coordinates of Ca₆Sr_3.96(Si₂O₇)₃Cl₂:0.03Eu²⁺ phosphor are (0.127, 0.770) according to the emission spectrum. It can be expected that Ca₆Sr₄(Si₂O₇)₃Cl₂:Eu²⁺ phosphor is a promising candidate as the green component for near-ultraviolet InGaN-based white LED.     

硼酸对亚微米级Ca3Sc2Si3O12:Ce绿色荧光粉的制备及发光性能的影响

采用凝胶-燃烧法合成了Ca₃Sc₂Si₃O₁₂ ∶Ce绿色LED用荧光粉,用X射线粉末衍射(XRD)、扫描电镜(SEM)、荧光光谱仪等对合成产物进行了分析和表征.结果表明:通过添加H₃BO₃做助熔剂,制得的荧光粉晶相纯正,颗粒形貌均呈现为较规则的类球形,而且所得荧光粉的粒径均小于1 μm.发射光谱呈现为一宽带,发射主峰位于505 nm,该宽峰对应于Ce³⁺关键词： 白光LED 荧光粉 3Sc₂Si₃O₁₂ ∶Ce')" href="#">Ca₃Sc₂Si₃O₁₂ ∶Ce 发光     

Effects of dopant concentrations on phosphorescence properties of Eu/Dy-doped Sr3MgSi2O8

Long afterglow Sr₃MgSi₂O₈: Eu, Dy phosphor with high brightness was prepared by sintering at high temperature and weak reductive atmosphere. The luminescent properties of this photoluminescent pigment were studied systematically by investigating concentration effects. The analytical results indicated that the main emission peaks appear at 482 nm. The excitation and emission spectra of this phosphor show that both of them are broadband. This is ascribed to the 4f⁷→4f⁶5d¹ transition of Eu²⁺ in the pigment matrix, which is in good agreement with the calculated value of 470 nm, and implies that luminescent centers Eu²⁺ occupy the deca-coordinated Sr²⁺ sites with the host of Sr₃MgSi₂O₈.