基于平面声源进行结构声辐射有源控制的实验研究

采用分布式平面声源作为次级声源,对振动钢板的声辐射进行了抵消实验,验证了以往研究中的一系列关键理论。实验研究结果表明:一个平面声源可以控制钢板奇-奇模态的声辐射,两个平面源可以控制结构偶-奇或奇-偶模态的声辐射,同时也可以控制结构奇-奇模态的声辐射;平面声源的面积和布放位置对降噪效果有重要影响,采用单个平面声源控制时,平面声源面积越大,控制效果越好;基于近场声压的误差传感策略是有效可行的,实际中,将近场测量面的声功率作为有源控制的目标函数与总声功率作为目标函数是一致的;控制后远场声压和声强都得到有效降低,部分区域的声能向声源流动,近场声压及声强分布也发生显著变化。     

A compound secondary source for active noise radiation control

Based on the analysis of active noise control system with multi-channel monopole secondary sources, a kind of compound secondary source is proposed in this paper. The proposed compound secondary source consists of two closely located monopole sources with their distance much smaller than a wavelength. The characteristics of the compound source are analyzed, and the performances of the active noise control system with the compound secondary sources on the monopole primary sound field and sound radiated by a plate are investigated both numerically and experimentally. It has been found that the proposed compound secondary sources control system can provide higher noise reduction for free field noise radiation control with the same number of control channels. It is shown that the better performance in noise reduction of the compound secondary sources control system is mainly due to the directivity of the secondary sources where the energy radiation pattern of the compound sources is similar to that of the primary sources.     

Effect of acoustical damping with a porous absorptive layer in the cavity to reduce the structure-borne sound radiation from a double-leaf structure

Structure-borne sound radiation from a double-leaf structure with a porous absorptive layer in the cavity is studied theoretically as well as experimentally. The study is for establishing a countermeasure to reduce the structure-borne noise radiated from an interior leaf into rooms and for clarifying its reduction effect. The sound field radiated from a double-leaf elastic plate with layers of arbitrary media in the cavity set into vibration by a point force excitation is theoretically analyzed. The effect of the bulk vibration of an absorptive layer is also considered by a simple model into the present theory. Radiation reduction of an inner-layer derived from the theory is experimentally validated. Parametric studies reveal that increasing the ratio of an absorptive layer thickness to the cavity depth is effective to reduce the structure-borne sound radiation but high flow resistivity of the absorbent material is not necessarily required. A practical equation to predict the mass-air-mass resonance frequency for absorbent cavity case is given in a simple form.     

A Sound Field Separation and Reconstruction Technique Based on Reciprocity Theorem and Fourier Transform

We show a method to separate the sound field radiated by a signal source from the sound field radiated by noise sources and to reconstruct the sound field radiated by the signal source. The proposed method is based on reciprocity theorem and the Fourier transform. Both the sound field and its gradient on a measurement surface are needed in the method. Evanescent waves are considered in the method, which ensures a high resolution reconstruction in the near field region of the signal source when evanescent waves can be measured. A simulation is given to verify the method and the influence of measurement noise on the method is discussed.     

跑道线圈换能器在铁路重载货车探伤中的应用*

针对在线车轮超声探伤系统的工程应用,研究了跑道线圈电磁超声换能器由洛伦兹力换能机制在钢中产生的辐射声场。根据外磁场和线圈配置,将表面力源近似为非均匀的水平剪切力源,数值计算得到了此力源的辐射声场指向性图,并与实验结果进行比对,结果表明辐射的水平偏振横波具有中间强两侧弱的指向性,对理解跑道形电磁线圈超声换能器的辐射声场和在重载货车车轮辋裂缺陷探伤中的工程应用具有一定的指导意义。     

Uncertainty of array-based measurement of radiated and absorbed sound intensity

Patch near-field acoustic holography (NAH) coupled with an array of sound intensity probes allows separating the sound field incident on a surface from the one radiated by the surface itself. Although the measurement principle has been successfully used to separate the noise source contribution from disturbing sources and/or noise reflections, the method accuracy has not been investigated in the literature. We describe the results of experiments meant to evaluate the uncertainty in the identification of noise radiated by vibrating panels with different absorption characteristics in presence of an incident acoustic radiation using the statistically optimized near-field acoustic holography. Measurement errors were evaluated through tests performed in controlled acoustic conditions. Results evidenced that the measurement uncertainty depends on the accuracy of the microphone array positioning and on the incident sound field. These conclusions were in agreement with the results obtained by simulations in the phase of instrument optimization.     

采用球面波叠加法还原自由声场的方法

为解决非自由声场中近场声全息重建时,干扰声在目标声源表面产生的散射影响,提出一种基于球面波叠加法的自由场还原技术。该技术首先采用基于球面波叠加法的声场分离技术获得向内和向外传播的声场,然后以目标声源的表面导纳作为边界条件,实现目标声源辐射声和散射声的分离,从而获得等效于自由声场的测量条件。该技术为准确实现非自由声场中的噪声源识别创造了条件。文中首先详细描述了该技术的基本原理,并提出一种最优球面波展开项数选取方法,最后通过数值仿真说明了该技术的有效性。结果表明:在频率较低时,散射声影响较小,采用声场分离技术和自由场还原技术效果相当;但随着频率升高,散射声影响逐步增强,必须采用自由场还原技术才能准确获得目标声源辐射声。      

Recovery of the free field in noisy environment by using the spherical wave superposition method

To remove the scattering effect of the disturbing sound on the target source when implementing nearfield acoustic holography in a non-free field, a free field recovery technique based on the spherical wave superposition method is proposed. In the method, the sound field separation technique based on the spherical wave superposition method is first used to separate the incoming and outgoing fields, and a further step for separating the radiated and scattered fields is performed by utilizing the surface admittance of the target source as the boundary condition. The technique makes it possible to correctly identify noise sources in a non-free sound field. The basic principle of the technique is described firstly, a method for choosing the optimal number of spherical wave expansion terms is given, and two numerical simulations are used to demonstrate the validity of this technique. It is shown that, for the lower frequency, the scattering effect can be neglected, and the radiated field of the target source can be obtained by the sound field separation technique, however, as the increasing of the frequency, the scattering effect cannot be neglected, and the free field recovery technique has to be used to obtain the radiated field of the target source.     

内部体积源作用下的圆柱壳内外声场特性

圆柱壳内各型体积源辐射噪声特性研究是声场建模和声场预报的前提.为了研究具有指向性的大尺度体积源特性对水下航行器结构内外声场的影响,本文结合薄壳理论、等效源和柱腔Green函数构造了体积源激励下的壳体振动耦合方程,研究了体积源表面声散射作用和指向性强弱对圆柱壳内外声场的影响.数值计算结果表明,体积源构造的准确性与其等效源位置有关,等效源配置在体积源几何中心与其结构表面之间0.4—0.6时,可以提高声场计算结果的准确性;大尺度体积源表面的声散射作用会导致壳体内部声场结构发生改变,内声场声腔共振峰发生偏移,并且在部分频段引起较强的声透射现象;此外,体积源指向性变化对壳体内外声场强弱影响较小,其显著作用表现在改变了外辐射声场的远场指向性.该研究结果对噪声预报和控制有一定的参考价值.     

Reduction of radiated exterior noise from the flexible vibrating plate of a rectangular enclosure using multi-channel active control

This study attempted to control the radiated exterior noise from a rectangular enclosure in which an internal plate vibrates by acoustic excitation and noise is thus radiated from that plate. Multi-channel active control was applied to reduce the vibration and external radiation of this enclosed plate. A piezoelectric ceramic was used as a distributed actuator for multiple mode control of the vibration and radiated noise in the acoustically excited plate. To maximize the effective control, an approach was proposed for attachment the piezoelectric actuator in the optimal location. The plate and internal acoustic space in the enclosure are coupled with each other. This will change dominant frequency characteristics of the plate and, thus, those of the externally radiated noise. Active noise control was accomplished using an accelerometer attached to the plate and a microphone placed adjacent to that plate as an error sensor under acoustic excitation of sine wave and white noise. It was found that the control of radiated external radiation noise requires a microphone as an error sensor, a sound pressure sensor due to vibration of the plate, differences in the dominant frequency of externally radiated noise, and complex vibration modes of the plate.     

Noise control for rapid transit cars on elevated structures

Noise control treatments for the propulsion motor noise of rapid transit cars on concrete elevated structures and the noise reduction from barrier walls were investigated by using acoustical scale models and supplemented by field measurements of noise from trains operated by the Port Authority Transportation Corporation (PATCO) in New Jersey. The results show that vehicle skirts and undercar sound absorption can provide substantial cost-effective reductions in propulsion noise at the wayside of transit systems with concrete elevated guideways. The acoustical scale model noise reductions applied to PATCO vehicles on concrete elevated structures show reductions in the A-weighted noise levels of 5 dB for undercar sound absorption, 5 dB for vehicle skirts, and 10 dB for combined undercar absorption and vehicle skirts. Acoustical scale model results for sound barrier walls lined with absorptive treatment showed reductions from 7 dB to 12 dB of noise from vehicles in the far track, depending on the height of the wall, and reductions from 12 dB to 20 dB of noise from vehicles on the near track. Transit vehicles at high speeds where propulsion system noise dominates are 7 dB(A) noisier at 50 ft on concrete elevated structures than on at-grade on tie and ballast. Of this amount, 3 dB is due to loss of ground effect, and 4 dB is due to the absence of undercar absorption provided by ballast.     

Verbal communication and noise in eating establishments

A new simple prediction model has been derived for the average A-weighted noise level due to many people speaking in a room with assumed diffuse sound field. Due to the feed-back influence of noise on the speech level (the Lombard effect), the speech level increases in noisy environments, and the suggested prediction model gives a 6 dB reduction of the noise level by doubling the equivalent absorption area of the room. This is in contrast to the lowering by 3 dB by doubling of the absorption area for a constant power sound source. The prediction model is verified by experimental data found in the literature. In order to achieve acceptable conditions for speech communication within a small group of people, a guide for the recommended minimum absorption area per person in eating establishments is provided.     

Sound radiation from point sources in circular motion

The moving-source approach used by Morfey and Tanna for broad-band sound radiation from a point force in circular motion is adopted in this paper to evaluate the sound radiated in the far field due to point sources of random time variation rotating uniformly in a circle at subsonic speed. It is shown that the sound pressure results (overall and spectral density) for the volume velocity source can be easily extracted from the corresponding results for a rotating point force. An expression for the sound field of a point volume displacement source in arbitrary motion is derived and this is applied to the special case of uniform circular motion. The effects of acceleration of the sources due to circular motion on the radiated sound are established. Applications include noise from tip jet rotors, compressors and marine propellers.     

A frequency domain numerical method for airfoil broadband self-noise prediction

This paper describes a numerical approach, based in the frequency domain, for predicting the broadband self-noise radiation due to an airfoil situated in a smooth mean flow. Noise is generated by the interaction between the boundary layer turbulence on the airfoil surface and the airfoil trailing edge. Thin airfoil theory is used to deduce the unsteady blade loading. In this paper, the important difference with much of the previous work dealing with trailing edge noise is that the integration of the surface sources for computation of the radiated sound field is evaluated on the actual airfoil surface rather than in the mean-chord plane. The assumption of flat plate geometry in the calculation of radiation is therefore avoided. Moreover, the solution is valid in both near and far fields and reduces to the analytic solution due to Amiet when the airfoil collapses to a flat plate with large span, and the measurement point is taken to the far field.Predictions of the airfoil broadband self-noise radiation presented here are shown to be in reasonable agreement with the predictions obtained using the Brooks approach, which are based on a comprehensive database of experimental data. Also investigated in this paper is the effect on the broadband noise prediction of relaxing the ‘frozen-gust’ assumption, whereby the turbulence at each frequency comprises a continuous spectrum of streamwise wavenumber components. It is shown that making the frozen gust assumption yields an under-prediction of the noise spectrum by approximately 2dB compared with that obtained when this assumption is relaxed, with the largest occurring at high frequencies.This paper concludes with a comparison of the broadband noise directivity for a flat-plat, a NACA 0012 and a NACA 0024 airfoil at non-zero angle of attack. Differences of up to 20 dB are predicted, with the largest difference occurring at a radiation angle of zero degrees relative to the airfoil mean centre line.     

Minimally radiating sources for personal audio

In order to reduce annoyance from the audio output of personal devices, it is necessary to maintain the sound level at the user position while minimizing the levels elsewhere. If the dark zone, within which the sound is to be minimized, extends over the whole far field of the source, the problem reduces to that of minimizing the radiated sound power while maintaining the pressure level at the user position. It is shown analytically that the optimum two-source array then has a hypercardioid directivity and gives about 7 dB reduction in radiated sound power, compared with a monopole producing the same on-axis pressure. The performance of other linear arrays is studied using monopole simulations for the motivating example of a mobile phone. The trade-off is investigated between the performance in reducing radiated noise, and the electrical power required to drive the array for different numbers of elements. It is shown for both simulations and experiments conducted on a small array of loudspeakers under anechoic conditions, that both two and three element arrays provide a reasonable compromise between these competing requirements. The implementation of the two-source array in a coupled enclosure is also shown to reduce the electrical power requirements.     

Sound radiation from inflow turbulence in axial flow fans

The sound radiated when inflow turbulence is present in axial flow fans has been investigated. Theoretically, two noise radiating mechanisms can be identified: (i) interaction of turbulence with the rotor potential field results in a quadrupole-type volume source distribution, producing “flow-interaction” noise; (ii) impingement of turbulence on the blades results in a dipole-type (fluctuating force) surface source distribution, producing “fluctuating lift” noise. A theoretical expression for the flow interaction sound power in the upstream radiation field has been developed, in terms of parameters that can be experimentally determined by near field flow measurements involving spatial cross-correlations of the fluctuating axial velocity, with respect to both radial and circumferential position. Both these measurements and radiated sound pressure measurements have been made for eight- and ten-bladed rotors of relatively low tip Mach number (< 0·3). The sound pressure measurements revealed the occurrence of band-spreading of discrete tones at the blade passing frequency and its harmonics, as would be theoretically predicted for quadrupole-type sources here. The theoretical predictions and the measurements, respectively, of the sound power radiated upstream were compared. The results indicated that, for the fans tested, the “fluctuating lift” noise strongly predominated over the “flow-interaction” noise. The observed sound power levels were consistent with levels estimated from the theory.     

Quantitative measurement of pass-by noise radiated by vehicles running at high speeds

It has been a challenge in the past to accurately locate and quantify the pass-by noise source radiated by the running vehicles. A system composed of a microphone array is developed in our current work to do this work. An acoustic-holography method for moving sound sources is designed to handle the Doppler effect effectively in the time domain. The effective sound pressure distribution is reconstructed on the surface of a running vehicle. The method has achieved a high calculation efficiency and is able to quantitatively measure the sound pressure at the sound source and identify the location of the main sound source. The method is also validated by the simulation experiments and the measurement tests with known moving speakers. Finally, the engine noise, tire noise, exhaust noise and wind noise of the vehicle running at different speeds are successfully identified by this method.     

Sound radiation from point-driven shell structures

A numerical study is presented showing the structural response and sound radiation from a range of thin shell structures excited by a point force: a baffled flat plate, a sphere, a family of spheroids and a family of closed circular cylinders. All the structures have the same material properties, thickness and total surface area so the asymptotic modal density is the same. Dramatic differences are shown in the total radiated sound power for the different shells. It was already known that the flat plate and the sphere behave very differently. These results show that the cylinders and, particularly, the spheroids show patterns that are not intermediate between the two but instead display new features: in certain frequency ranges the radiated sound power can be at least an order of magnitude greater than either the plate or the sphere.     

Influence of support properties on the sound radiated from the vibrations of rectangular plates

The control of the forced vibration response of structures through the optimal tuning of its supports is desirable in many applications. Tuning may enhance the dissipation of vibration energy within the supports, thereby reducing fatigue and structure-borne noise. Two different models were developed to calculate the optimal support stiffness that minimizes the velocity response of homogeneous plates. The first model, based on the wave propagation at the edge, yields a good first cut approximation of the optimal properties. The optimal viscous and viscoelastic support stiffness for minimal reflection at the edge was calculated. Maximum absorption of the incident waves occurs when the viscous support stiffness matches the characteristic mechanical impedances of the plate. The second model, based on the Rayleigh-Ritz method, yields more accurate estimates of the optimal support stiffness required to minimize the forced velocity response of the finite rectangular plate. The optimal support properties calculated from the two different methods were in good agreement. This suggested that the modal response of the plate is strongly influenced by the wave reflections at the edges. Finally, the effects of support properties on the sound radiated from the plate were investigated. The optimal support stiffness that minimizes the radiated sound power was found to be smaller than the value that minimizes the velocity response. The results show that both the velocity response and sound radiation are strongly influenced by dissipation of vibration energy at the edges, and demonstrate that support tuning can yield significant noise and vibration reduction.     

Sound radiation from a double-leaf elastic plate with a point force excitation: effect of an interior panel on the structure-borne sound radiation

The sound radiation from a double-leaf elastic plate subjected to a point force excitation is investigated theoretically, to gain a fundamental insight into the sound radiation from an interior panel of a double-leaf structure in buildings. The effects of the interior panel on the sound radiation, which show a negative effect at low frequencies due to the mass-air-mass resonance, are discussed in detail. The theory is validated experimentally. As a measure of the efficiency of the interior leaf in reducing noise radiation, the radiation reduction is defined in this study, and it is found useful for predicting the sound radiation due to the structure-borne sound in building elements. Parametric studies through theoretical results are made to clarify the effects of the parameters of the sound radiation system, and to gain a fundamental insight into the control of structure-borne noise radiation. It is shown that it is difficult to reduce the radiated sound power by an interior panel alone, even if its mass is increased.