Rb吸附石墨烯纳米带电子性质和光学性质的研究

本文基于密度泛函理论的第一性原理方法了计算了Rb、O和H吸附石墨烯纳米带的差分电荷密度、能带结构、分波态密度和介电函数，调制了石墨烯纳米带的电子性质和光学性质，给出了不同杂质影响材料光学特性的规律.结果表明本征石墨烯纳米带为n型直接带隙半导体且带隙值为0.639 eV；Rb原子吸附石墨烯纳米带之后变为n型简并直接带隙半导体，带隙值为0.494eV；Rb和O吸附石墨烯纳米带变为p型简并直接带隙半导体，带隙值增加为0.996eV；增加H吸附石墨烯纳米带后，半导体类型变为n型直接带隙半导体，且带隙变为0.299eV，带隙值相对减小，更有利于半导体发光器件制备.吸附Rb、O和H原子后，石墨烯纳米带中电荷密度发生转移，导致C、Rb、O和H之间成键作用显著.吸附Rb之后，在费米能级附近由C-2p、Rb-5s贡献；增加O原子吸附之后，O-2p在费米能级附近贡献非常活跃，杂化效应使费米能级分裂出一条能带；再增加H原子吸附之后，Rb-4p贡献发生蓝移，O-2p在费米能级附近贡献非常强，费米能级分裂出两条能带.Rb、O和H的吸附后，明显调制了石墨烯纳米带的光学性质.     

点缺陷对单层MoS_2电子结构及光学性质的影响研究

采用基于第一性原理的贋势平面波方法,对不同类型点缺陷单层Mo S2电子结构、能带结构、态密度和光学性质进行计算.计算结果表明:单层Mo S2属于直接带隙半导体,禁带宽度为1.749e V,Mo空位缺陷V-Mo的存在使得单层Mo S2转化为间接带隙Eg=0.660e V的p型半导体,S空位缺陷V-S使得Mo S2带隙变窄为Eg=0.985e V半导体,S原子替换Mo原子S-Mo反位缺陷的存在使得Mo S2转化为带隙Eg=0.374e V半导体;Mo原子替换S原子Mo-S反位缺陷形成Eg=0.118e V直接带隙半导体.费米能级附近的电子态密度主要由Mo的4d态和s的3p态电子贡献.光学性质计算表明:空位缺陷对Mo S2的光学性质影响最为显著,可以增大Mo S2的静态介电常数、折射率n0和反射率,降低吸收系数和能量损失.     

二维硼碳基纳米结构上的吸附及其性质

综述金属原子与非金属原子和分子在石墨烯、BC₃平面等二维硼碳基纳米结构上的吸附所表现出的各种物理性质及可能的应用.纯净的石墨烯为零带隙的半金属、无磁且自旋轨道耦合效应非常弱,BC₃平面为间接带隙半导体,但金属原子与非金属原子和分子的吸附可能使石墨烯体系在Dirac点处打开带隙、具有强自旋轨道耦合效应,可能使石墨烯体系与二维BC₃体系具有磁有序、超导电性及应用在氢存储上.另外石墨烯表现出非常好的分子探测性能.     

B36团簇组装一维纳米线的密度泛函研究

采用密度泛函理论计算方法系统研究了B₃₆团簇组装一维纳米线的几何结构、电子结构及稳定性.发现两种不同构型的B₃₆团簇组装纳米线静态结构能量相同,且均为动力学稳定结构,但二者电子结构明显不同:分别呈现出半金属和小带隙半导体特征.对两类纳米线的H原子吸附显示:半金属纳米线转变为半导体,而半导体纳米线仍保持为半导体,但带隙明显增大.表明H原子吸附对于B₃₆团簇组装纳米线的电子结构具有明显的调控作用.     

扶手椅型C3B纳米带:结构稳定性、电子特性及调控效应

单层C₃B是典型的类石墨烯二维材料,已在实验上成功制备.采用密度泛函理论方法(DFT)研究了扶手椅型单层C₃B纳米带的结构稳定性、电子性质及物理调控效应,计算结果表明:对于裸边纳米带,如果带边缘全由C原子组成(AA型),则电子相为半导体;两个带边缘均由C与B原子混合组成时(BB型),则纳米带的电子相为金属;而纳米带的一边由C原子组成、另一边由B与C原子混合构成(AB型),则纳米带的电子相为金属.这说明纳米带边缘的B原子对于纳米带成为金属或半导体起决定作用.而对于H端接的纳米带,它们全部为直接或间接带隙半导体.H端接的纳米带载流子迁移率一般比裸边纳米带低,这与它们较大的有效质量及较高的形变势有密切关系.同时发现半导体性质的纳米带对物理调控非常敏感,特别是在压应变和外电场作用下,纳米带的带隙明显变小,这有利于对光能的吸收和研发光学器件.     

垂直电场下扭转双层石墨烯光学吸收性质的理论研究

层间扭转角度是对石墨烯物理性质宽波段可调谐的一个新参量.本文采用2°<θ<15°扭转角度下的连续近似模型,获得了不同扭转角度双层石墨烯分别在有、无电场下的能带结构,通过电子-光子相互作用跃迁速率,计算模拟了范霍夫奇点附近电子带内跃迁和带间跃迁所引起的光学吸收谱.结果表明,在无外加电场时,带间跃迁吸收峰的位置随着扭转角度的增大而发生从红外到可见光波段的蓝移,且吸收系数增大,带内跃迁的光学吸收系数相对于带间跃迁高出2个数量级;而存在外加电场时,两个范霍夫奇点在波矢空间的位置发生偏移,带间跃迁吸收峰发生分裂,且两个分裂的吸收峰位置随着电场强度的不断增大而反向行进.上述研究结果对石墨烯材料在光电器件方面的应用有一定指导作用.     

金属原子修饰石墨烯体系催化性能的理论研究

采用基于密度泛函理论的第一性原理方法研究了单个CO 和O2气体分子在金属原子修饰石墨烯表面的吸附和反应过程. 结果表明: 空位缺陷结构的石墨烯能够提高金属原子的稳定性, 金属原子掺杂的石墨烯体系能够调控气体分子的吸附特性. 通入混合的CO和O2作为反应气体, 石墨烯表面容易被吸附性更强的O2分子占据, 进而防止催化剂的CO 中毒. 此外, 对比分析两种催化机理(Langmuir-Hinshelwood和Eley-Rideal)对CO氧化反应的影响. 与其它金属原子相比, Al原子掺杂的石墨烯体系具有极低的反应势垒(< 0.4 eV), 更有助于CO氧化反应的迅速进行.     

金属原子修饰石墨烯体系催化性能的理论研究

采用基于密度泛函理论的第一性原理方法研究了单个CO和O2气体分子在金属原子修饰石墨烯表面的吸附和反应过程.结果表明:空位缺陷结构的石墨烯能够提高金属原子的稳定性,金属原子掺杂的石墨烯体系能够调控气体分子的吸附特性.通入混合的CO和O2作为反应气体,石墨烯表面容易被吸附性更强的O2分子占据,进而防止催化剂的CO中毒.此外,对比分析两种催化机理(Langmuir-Hinshelwood和Eley-Rideal)对CO氧化反应的影响.与其它金属原子相比,Al原子掺杂的石墨烯体系具有极低的反应势垒(0.4 e V),更有助于CO氧化反应的迅速进行.     

氧化石墨烯纳米带能带结构和态密度的第一性原理研究

基于密度泛函理论,采用第一性原理方法,计算了氧化石墨烯纳米带的电荷密度、能带结构和分波态密度。结果表明,石墨烯纳米带被氧化后,转变为间接带隙半导体,带隙值为0.375 e V。电荷差分密度表明,从C原子和H原子到O原子之间有电荷的转移。分波态密度显示,在导带和价带中C-2s、2p,O-2p,H-1s电子态之间存在强烈的杂化效应。在费米能级附近,O-2p态电子局域效应的贡献明显,对于改善氧化石墨烯纳米带的半导体发光效应起到了主要作用。     

点缺陷对单层MoS2电子结构及光学性质的影响研究

采用基于第一性原理的贋势平面波方法,对不同类型点缺陷单层MoS2电子结构、能带结构、态密度和光学性质进行计算。计算结果表明：单层MoS2属于直接带隙半导体,禁带宽度为1.749ev,V-Mo缺陷的存在使得MoS2转化为间接带隙Eg=0.671eV的p型半导体,V-S缺陷MoS2的带隙变窄为Eg=0.974eV,S-Mo缺陷的存在使得MoS2转化为间接带隙Eg=0.482eV; Mo-S缺陷形成Eg=0.969eV直接带隙半导体,费米能级上移靠近价带。 费米能级附近的电子态密度主要由Mo的4d态和s的3p态电子贡献。光学性质计算表明：空位缺陷对MoS2的光学性质影响最为显著,可以增大MoS2的静态介电常数、折射率n0和反射率,降低吸收系数和能量损失。     

Effects of vacancy and deformation on an Al atom adsorbed on graphene

First-principles calculations based on density functional theory are carried out to study the adsorption energy of monovacancy and deformation on an Al atom adsorbed on graphene. The bond length and Mulliken charge of an Al atom adsorbed on intrinsic and defected graphene systems are also analyzed. We find that an Al atom, sitting above the H site of intrinsic graphene, is in the most stable location. And the adsorption energy increases with increasing graphene coverage. In 1/32 Al/VC-gra and 1/8 Al/VC-gra Al—C covalent bonds are formed, and the Al—C ionic bonds are enhanced by the vacancy. For our calculations, vacancy and deformation both enhance the adsorption energy of an Al atom adsorbed on a graphene system, but vacancy is more effective. In a tensile system, a geometric distortion is induced in the adsorption structure when the tensile deformation is greater than 15%; in a compression system, the adsorption structure begins to distort from 5%. When the tensile and compressive deformations are greater than 10%, the compressive deformation is more effective than the tension deformation on an Al atom adsorbed on the graphene system. Especially, when the deformation is relatively small, a vacancy has a greater effect on the adsorption energy of an Al atom adsorbed on graphene.     

基于芯-电子结合能偏移的碱金属中的表面、尺寸和热效应

还原氧化石墨烯是大规模生产石墨烯的前体;然而迄今为止,还原氧化石墨烯的电子结构还没有达成共识. 本文运用从头分子动力学方法研究羟基在石墨烯表面的吸附过程. 在吸附过程中,OH基团首先在位于两个碳原子桥位上方形成物理吸附络合物,然后翻越过渡态,最终被吸附在一个碳原子的顶位位点. 结果显示5×5石墨烯表面最多可以吸附6个羟基,表明石墨烯表面羟基的覆盖率约为12%. 计算结果还显示,负吸附能随着羟基吸附数目的增加而线性增加,带隙也随着羟基吸附数目的增加而线性增加.     

Mechanical properties and thermal conductivity of the twisted graphene nanoribbons

Molecular dynamics method was used to simulate the twists of four GNRs (graphene nanoribbons), two AGNRs (armchair GNRs), and two ZGNRs (zigzag GNRs). Thermal conductivity of the length-fixing GNRs under torsion and at high temperature was calculated. It is found that the ZGNRs have better torsional rigidity than the AGNRs; under the torsional deformation of 34.2°/nm local buckling occurs in the length-fixing GNRs, and under the deformation of 22.8°/nm overall buckling occurs in the ones with free-length. In the range of investigated twist-angle and temperature, the thermal conductivity of the length-fixing GNRs decreases with the increase of torsional deformation and temperature. The wider GNRs have better anti-torsion capability and thermal conductivity.     

单层MoS_2表面吸附Ag_6团簇电子结构的第一性原理计算

本文运用第一性原理研究了单层MoS_2在S位吸附Ag_6团簇的稳定性、能带结构和态密度.结果表明,Ag_6团簇在S位单点位吸附的稳定性强于双点位吸附、三点位吸附;其中吸附体系禁带中产生了2条杂质能级,原因在于Ag原子与S形成共价键下的施主能级与受主能级;Ag_6团簇在单层MoS_2的吸附导致态密度峰值在费米能级处发生劈裂,说明Ag_6团簇的吸附会增强单层MoS_2的光电特性;单层MoS_2的能带结构可以通过表面吸附Ag_6团簇以及金属团簇进行调控;在实际的生产应用中依据不同的金属团簇吸附于单层MoS_2表面得到需要的的半导体器件.     

A torsional potential for graphene derived from fitting to DFT results

We present a simple torsional potential for graphene to accurately describe its out-of-plane deformations. The parameters of the potential are derived through appropriate fitting with suitable DFT calculations regarding the deformation energy of graphene sheets folded around two different folding axes, along an armchair or along a zig-zag direction. Removing the energetic contribution of bending angles, using a previously introduced angle bending potential, we isolate the purely torsional deformation energy, which is then fitted to simple torsional force fields. The presented out-of-plane torsional potential can accurately fit the deformation energy for relatively large torsional angles up to 0.5 rad. To test our proposed potential, we apply it to the problem of the vertical displacement of a single carbon atom out of the graphene plane and compare the obtained deformation energy with corresponding DFT calculations. The dependence of the deformation energy on the vertical displacement of the pulled carbon atom is indistinguishable in these two cases, for displacements up to about 0.5 Å. The presented potential is applicable to other sp² carbon structures.     

Quantum Monte Carlo investigations of adsorption energetics on graphene

We have performed calculations of adsorption energetics on the graphene surface using the state-of-the-art diffusion quantum Monte Carlo method. Two types of configurations are considered in this work: the adsorption of a single O, F, or H atom on the graphene surface and the H-saturated graphene system (graphane). The adsorption energies are compared with those obtained from density functional theory with various exchange-correlation functionals. The results indicate that the approximate exchange-correlation functionals significantly overestimate the binding of O and F atoms on graphene, although the preferred adsorption sites are consistent. The energy errors are much less for atomic hydrogen adsorbed on the surface. We also find that a single O or H atom on graphene has a higher energy than in the molecular state, while the adsorption of a single F atom is preferred over the gas phase. In addition, the energetics of graphane is reported. The calculated equilibrium lattice constant turns out to be larger than that of graphene, at variance with a recent experimental suggestion.     

To the theory of adsorption on epitaxial graphene: Model approach

A model of adsorption on epitaxial graphene has been constructed in two stages: first, the density of states of a graphene monolayer adsorbed on a solid substrate has been found and then an adsorbed atom has been placed on the epitaxial graphene thus formed. Metallic and semiconductor substrates have been considered. Charge transfer between the adatom and epitaxial graphene has been calculated. The roles of the substrate and graphene layer in the formation of the electronic state of adatoms have been estimated.     

Electronic and magnetic properties of copper-family-element atom adsorbed graphene nanoribbons with zigzag edges

We have investigated the electronic and magnetic properties of copper-family-element (CFE) atom adsorbed graphene nanoribbons (GNRs) with zigzag edges using first-principles calculations based on density functional theory. We found that CFE atoms energetically prefer to be adsorbed at the edges of nanoribbons. Charges are transferred between the CFE atom and carbon atoms at the edge, which reduce the local magnetic moment of carbon atoms in the vicinity of adsorption site and change the electronic structure of GNRs. As a result, Cu adsorbed zigzag GNR is a semiconductor with energy band gap of 0.88 eV in beta-spin and energy gap of 0.22 eV in alpha-spin, while Ag adsorbed zigzag GNR and Au adsorbed zigzag GNR are both half-metallic with the energy gaps of 0.68 eV and 0.63 eV in beta-spin, respectively. These results show that CFE atom adsorbed zigzag GNRs can be applied in nanoelectronics and spintronics.     

Optoelectronic properties of two-dimensional GaN adsorbed with H,N and O: A first-principle study

In this paper, we have investigated optoelectronic properties of two-dimensional GaN adsorbed with non-metal atoms: H, N and O based on first-principle. We find that adsorption of H, N and O atom on 2D GaN is achieved by chemisorption, and the most stable adsorption site is at the top of N atom. Band structure of 2D GaN after adsorbing H atom moves to low energy region and two-dimensional GaN is transformed into an n-type semiconductor. After adsorption of N atom, a new impurity energy appears at the Fermi level, and N adatom could induce magnetism into 2D GaN. Static dielectric constants of 2D GaN increase and adsorption spectrums have extend to infrared band when adsorbing H and N. Strong reflection peaks and strong adsorption peaks after adsorption are located at deep ultraviolet range, which is beneficial for optoelectronic application in the deep ultraviolet. Specifically, two-dimensional GaN adsorbed with H atom is more conducive to manufacture of nano-optoelectronic devices.