基于一维金属-介质周期结构的偏振分束

分析了一维金属一介质周期结构的能带特性,根据一定频率范围内TM波(磁场方向与界面平行)在结构中的负折射以及TE波的正常折射,提出了一种偏振分束器件.利用传输矩阵法(TMM)模拟了该结构对入射高斯光束的偏振分束作用,讨论了不同入射角度下的偏振分束能力,并结合实际金属参量,分析了金属层吸收对结构特性的影响.结果表明该结构在55°附近入射时有最好的性能;在吸收作用下结构偏振分束能力有一定的减小,TM波透射比发生了较大变化,TE波效果较好;随着周期数增加,结构透射比下降,但分光能力显著提高;在工作波段上随着波长增大,金属层吸收对器件的影响减弱.该结构能实现宽波段、宽角度、较高透射比的偏振分束.     

表层厚度渐变一维耦合腔光子晶体的反射相位特性及其应用

利用传输矩阵法研究了表层厚度渐变的一维非对称耦合腔光子晶体的反射相位特性. 研究表明, 光子禁带内(包括缺陷模附近)的反射率在98%以上, 且基本不受表层厚度影响, 特别是, 在非正入射情况下, 简并的缺陷模随着表层厚度的变化会发生分裂; 进一步研究发现, 在缺陷模分裂处附近, TE, TM偏振的反射相位以及它们之间的相位差均敏感地依赖于表层厚度的变化, 从而使得反射光的偏振态也随表层厚度的变化而敏感变化, 其物理机理在于缺陷模分裂所造成的剧烈相位变化. 基于上述特性, 设计了一种表层厚度呈二维周期变化的一维光子晶体结构, 从该结构反射的激光经透镜聚焦后, 在聚焦区域同时存在各种偏振态(包括沿不同方向的线偏振、左旋或右旋圆偏振、椭圆偏振等)的子光束, 它们叠加后在聚焦区域将产生具有无规相位和无规偏振态的光场. 以上结果能有效降低激光的相干性, 在激光核聚变等领域有潜在的应用价值.     

Broadband non-polarizing beam splitter based on guided mode resonance effect

A broadband non-polarizing beam splitter (NPBS) operating in the telecommunication C+L band is designed by using the guided mode resonance effect of periodic silicon-on-insulator (SOI) elements. It is shown that this double layer SOI structure can provide ～50/50 beam ratio with the maximum divergences between reflection and transmission being less than 8% over the spectrum of 1.4 μm～1.7 μm and 1% in the telecommunication band for both TE and TM polarizations. The physical basis of this broadband non-polarizing property is on the simultaneous excitation of the TE and TM strong modulation waveguide modes near the designed spectrum band. Meanwhile, the electric field distributions for both TE and TM polarizations verify the resonant origin of spectrum in the periodic SOI structure. Furthermore, it is demonstrated with our calculations that the beam splitter proposed here is tolerant to the deviations of incident angle and structure parameters, which make it very easy to be fabricated with current IC technology.     

Maximizing band gaps in two-dimensional photonic crystals by using level set methods

The optimal design of photonic band gaps for two-dimensional square lattices is considered. We use the level set method to represent the interface between two materials with two different dielectric constants. The interface is moved by a generalized gradient ascent method. The biggest gap of GaAs in air that we found is 0.4418 for TM (transverse magnetic field) and 0.2104 for TE (transverse electric field).     

正负折射率材料组成的一维光子晶体的能带及电场

计算了由正负折射率材料交替排列组成的一维光子晶体的能带及电场，发现其能带不同于由普通正折射率材料组成的光子晶体的能带.当选择合适的参数时，由正负折射率材料组成的光子晶体的TE模或TM模有完全光子带隙出现，这在普通光子晶体中不出现.导带中的电场波函数与普通光子晶体相比具有很强的局域性.对于负折射率材料层为色散介质的情况，计算了在不同的具有正负折射率区域能带.     

Polarization insensitive self-collimation waveguide in square lattice annular photonic crystals

The frequency bands for self-collimation at both TE and TM polarizations in square lattice annular photonic crystals are studied systematically by plane-wave expansion and finite difference time domain methods. By increasing the inner ring radius or reducing the outer ring radius, the self-collimation band will be moved to a lower frequency. Compared with the TM modes, TE ones have different frequency sensitivities to both the inner ring radius and outer ring radius tuning. Using these features, a polarization insensitive self-collimation waveguide in a high dielectric contrast system with bandwidth up to 102.9 nm is demonstrated as an example of the implementation of photonic integration circuits.     

一维光子晶体禁带特性的研究

应用传输矩阵法研究了一维光子晶体的禁带特性,数值模拟得到了一维光子晶体TE模、TM模和TE/TM模禁带结构,计算结果表明,介质层的厚度发生变化时,禁带宽度发生变化。研究结果为一维光子晶体器件的设计提供了理论依据。     

极化控制的双波段宽带红外吸收器研究

红外吸收器在红外隐身、辐射制冷、红外探测、传感器等方面有重要的应用前景.一维光栅型吸收器由于其结构简单、易于加工的优势备受关注,然而其不足之处是频带很窄,且只对一种极化有效.本文提出了一种基于简单一维周期结构的双波段宽带吸收器,对横磁波和横电波都有效,且吸波频段随入射波的极化方式而改变.该结构的基本单元由八个梯度排列的子单元构成,每个子单元由两层金属-介质双层膜垂直层叠组成.全波仿真结果表明,在1.68—2μm波段,该结构对横磁波吸收超过90%,而对横电波吸收很小(小于6%);在3.8-3.9μm波段,该结构对横电波吸收超过90%,而对横磁波吸收很小(小于5%).另外,该结构具有宽角度吸收特性,当入射角增大到60°时仍然能够保持较高的吸收率和较宽的吸收频带.     

Complete photonic band gaps in one-dimensional ternary photonic crystals containing single negative materials

Complete photonic band gaps (PBGs) are found in one-dimensional ternary photonic crystals (1D TPCs) composed of an ordinary dielectric and single negative metamaterials. The proposed TPC gives omni directional PBG completely independent of polarizations dependent weekly on angle of incidence. Here the choice of different parameters of TPC is done in such a way so that it eliminates the Brewster's-angle transmission resonance, thus allowing a complete 3D PBG. It exhibits a photonic band or gap near frequencies where either the magnetic permeability or the electric permittivity of the metamaterial changes sign, whose width increases with the increasing angle of incidence. These result from the dispersive properties of the metamaterials and disappear for the particular case of propagation along the stratification direction. The results are discussed in terms of incident angle, layer thickness, dielectric constant of the dielectric material for TE and TM polarizations.     

二维色散和各向异性磁化等离子体光子晶体色散特性研究

采用平面波展开法和时域有限差分法研究了二维色散和各向异性磁化等离子体光子晶体的色散特性.当波矢在周期平面时,由于外加磁场的作用使TE模的色散曲线出现两个不同区域的平带,改变磁场的大小不但可以控制平带的位置,而且可以控制光子带隙的位置和大小.增大背景材料的介电常数,可以形成全方向光子带隙,随着背景材料介电常数的增加,带隙的中心位置降低但带隙宽度增加.当波矢偏离周期平面时,色散曲线不再分为TE和TM模,随着非周期平面波矢的增加,带隙位置上移,带隙宽度先增加随后基本保持不变.     

基于自准直效应的光子晶体异质结偏振分束器

基于光子晶体的自准直效应和禁带特性,提出了一种具有非正交异质结结构的光子晶体偏振分束器.无需引入缺陷或波导,可使光波在该结构中准直无发散地传输并实现分束功能,对制造工艺的要求大大降低.利用Rsoft软件,结合平面波展开法和二维时域有限差分法,对提出的偏振分束器进行了仿真研究.结果表明,该偏振分束器在一个较大的频率范围f=0.275—0.285(a/λ)内可实现横电(TE)和横磁(TM)模的大角度偏振分离,TE和TM模的透过率均在88%以上,偏振消光比分别大于26.57 dB和17.50 dB.该结构可应用到太赫兹波段的传输系统中,a=26μm,尺寸大小为572μm×546μm,在91—95μm波长范围内可实现TE和TM模的分离.利用该结构可设计用于光通信系统(n=3.48)的偏振分束器,a=426.25 nm,结构仅为9.38μm×8.95μm.本方案结构简单,易于集成,有望在集成光路的发展中发挥重要作用.     

The competition between two polarization states in two-dimensional random medium

In a two-dimensional random medium, when the transverse magnetic (TM) polarization state and the transverse electric (TE) polarization state share the same population inversion, there is a competition in the population inversion between the two states. Such competition is analyzed by using the finite difference time domain method to numerically solve Maxwell equations with a set of system parameters. The results indicate that TM state has a larger lasing threshold than TE state does so that TM state is strongly suppressed by TE state in the competition. The larger the size of the medium, the easier the lasing modes in TM state appears.     

旋转对二维正方晶格介质柱内空结构光子晶体禁带的影响

采用平面波展开的方法计算了三种旋转操作下二维正方晶格各向异性材料(Te)介质柱内空结构光子晶体TE,TM模式能带.讨论了三种旋转操作对TE,TM模式带隙及完全光子禁带的影响.发现TM模式高频带隙与结构的旋转对称性有着密切的关系.而TE模式的带隙不仅受到晶体旋转对称性的影响同时也受到介质在x-y平面分布情况的影响. 关键词： 二维光子晶体 内空结构 旋转操作 光子带隙     

旋转对二维正方晶格介质柱内空结构光子晶体禁带的影响

采用平面波展开的方法计算了三种旋转操作下二维正方晶格各向异性材料(Te)介质柱内空结构光子晶体TE,TM模式能带.讨论了三种旋转操作对TE,TM模式带隙及完全光子禁带的影响.发现TM模式高频带隙与结构的旋转对称性有着密切的关系.而TE模式的带隙不仅受到晶体旋转对称性的影响同时也受到介质在x-y平面分布情况的影响.     

Omnidirectional reflectance gaps and resonant tunneling effect in a one-dimensional photonic crystal consisting of two metamaterials

We investigate the properties of electromagnetic wave propagating in a one-dimensional photonic crystal (PC) consisting of two metamaterials with different dispersive model. The reflection gaps of metamaterials multilayer system are independent of the incident angle. Not only TE wave but also TM wave, the omnidirectional reflection gaps exhibit the same behavior with different incident angle for metamaterials as double negative material. We also observed that the frequency regimes of zero-transmission bands are different for TE and TM wave with the same incident angle, when one of metamaterials is the permittivity negative (ε < 0) and the other is the double negative. Correspondingly, we show that the result can be act as an efficient polarization splitter. At last, we discuss the resonant tunneling effect. If the total reflection condition is satisfied, the resonant tunneling effect is enhanced as the incident angle increases, even though the propagation wave is evanescent wave in the single layer medium.     

Finite Element Analysis of the Field Patterns of Higher-Order TE and TM Modes in Rectangular-Groove Guide

The field patterns of the different TE and TM modes in a rectangular-groove guide are analysed by finite element method. The electric field, magnetic field and energy distributions in the groove guide for the dominant TE mode, the lowest TM mode and the 1st, 2nd, and 3rd higher-order TE,TM modes are presented. The results show that the low-loss characteristic of rectangular-groove guide seems unreliable. The results in this paper will be of benefit for us to understand the transmission characteristics of rectangular-groove guide, and will be of practical significance in designing groove guide components.     

Ultracompact and fabrication-tolerant integrated polarization splitter

Design and fabrication of a 2×2 two-mode interference (TMI) coupler based on-chip polarization splitter is presented. By changing the angle between the access waveguides, one can tune the effective TMI length for the mode with less optical confinement (transverse magnetic, TM) to coincide with the target TMI length for a desired transmission of the mode with higher optical confinement (transverse electric, TE). The fabricated 0.94?μm long 2×2 TMI splits the input power into TM (bar) and TE (cross) outputs with splitting ratio over 15?dB over 50?nm bandwidth. Fabrication tolerance analysis shows that the device is tolerant to fabrication errors as large as 60?nm.     

A polarization splitter based on slow light effect in a left-handed material waveguide

We propose a polarization splitter (PS) based on the slow light effect in a three-layer waveguide that consists of left-handed material (LHM) and dielectric layers with no birefringence. Transverse electric (TE) and transverse magnetic (TM) waves can be split by the intrinsic configuration of permittivity and permeability of LHM and dielectric layers. Simulation results are given to discuss the influence of electromagnetic parameters on the properties of our PS, and the capture and release of TE or TM waves are also realized in our PS which provides a flexible method to modulate the switching of different polarization waves.     

Plasmonic Metasurfaces Enabled Ultra‐Compact Broadband Waveguide TM‐Pass Polarizer

Silicon waveguide polarizers offer a simple yet robust approach to address the polarization‐dependent issue of silicon‐based optical components, and hence have found numerous applications in silicon photonics. However, the available silicon waveguide polarizers suffer from the issue of large device footprint, high insertion loss (IL), and/or fabrication complexities. Here, a silicon waveguide transverse magnetic (TM)‐pass polarizer is constructed by coating a silicon waveguide with an ultra‐thin plasmonic metasurface structure that is capable of guiding slow surface wave (SW) mode. The transverse electric (TE) waveguide mode can be converted into SW mode with the involvement of metasurfaces, and hence is intrinsically absorbed and forbidden to pass, while the TM waveguide mode can be well guided due to little influence. A typical metasurface polarizer with an ultra‐short length of 2.4 µm enables the IL of 28.16 dB for the TE mode, and that of 0.53 dB for the TM mode at 1550 nm. Multiple‐band TM‐pass polarizers can be obtained by cascading two or more different metasurface‐coated silicon waveguides along the propagation direction, and a dual‐band TM‐pass polarizer is demonstrated with the IL being of 19.21 and 29.09 dB for the TE mode at 1310 and 1550 nm, respectively.     

The research on polarization states with local pumping in two-dimensional active random medium

The polarization-dependent competition on inversed population with local pumping in two-dimensional (2D) active random media is investigated by simultaneously solving Maxwell’s equations and rate equations of electronic population for both transverse magnetic (TM) and transverse electric (TE) modes. The threshold property of the two polarization states with local pumping is analyzed. Results show that the lasing threshold of TM modes is lower than that of TE ones when the radius of the local pumping region is suitably selected, and the case would be contrary when the selected radius of the local pumping region is excessive.