Enhanced nucleation fields due to dipolar interactions in nanocomposite magnets

One approach to construct powerful permanent magnets while using less rare-earth elements is to combine a hard magnetic material having a high coercive field with a soft magnetic material having a high saturation magnetization at the nanometer scale and create so-called nanocomposite magnets. If both materials are strongly coupled, exchange forces will form a stable magnet. We use finite element micromagnetics simulations to investigate the changing hysteresis properties for varying arrays of soft magnetic spherical inclusions in a hard magnetic body. We show that the anisotropy arising from dipolar interactions between soft magnetic particles in a hard magnetic matrix can enhance the nucleation field by more than 10% and strongly depends on the arrangement of the inclusions.     

纳米晶复合永磁材料的交换耦合相互作用和磁性能

本文介绍了纳米磁性材料晶粒交换耦合相互作用的有关理论。采用不同模型讨论了晶粒交换耦合相互作用对纳米单相软磁材料、永磁材料及双相复合永磁材料磁性能的影响。简述了用δM(H)曲线和不可逆磁导率的变化研究晶粒交换耦合相互作用及反磁化过程的方法。讨论了合金成分配比、添加元素、制备及热处理工艺对磁体硬磁性能的影响。从理论和实验两方面分析、研究了纳米复合永磁材料的反磁化过程和矫顽力机制。     

纳米晶复合永磁材料的交换耦合相互作用和磁性能

本介绍了纳米磁性材料晶粒交换耦合相互作用的有关理论。采用不同模型讨论了晶粒交换耦合相互作用对纳米单相软磁材料、永磁材料及双相复合永磁材料磁性能的影响。简述了用δM（H）曲线和不可逆磁导率的变化研究晶粒交换耦合相互作用及反磁化过程的方法。讨论了合金分配比、添加元素、制备及热处理工艺对磁体硬磁性能的影响。从理论和实验两方面分析、研究了纳米复合永磁材料的反磁化过程和矫顽力机制。     

Interdiffusion in bilayer CoPt/Co films: potential for tailoring the magnetic exchange spring

The magnetic and microstructural properties and magnetic domain configuration of exchange-spring model bilayer samples based on L1₀-type magnetically-hard CoPt and magnetically soft Co were examined and analyzed. Bilayers of varying thicknesses and annealing conditions were examined with room-temperature and elevated-temperature SQUID magnetometry, X-ray diffraction, transmission electron microscopy and magnetic force microscopy. While lower-temperature (300°C ⩽T⩽400°C) annealing treatments produced little change in the domain configuration, it did produce subtle change in the microstructure and a noticeable increase in the degree of exchange coupling of the bilayers. Higher-temperature (T=550°C) annealing treatments produced profound changes in all parameters: the magnetic reversal behavior, the remanence ratio and the magnetic domain configuration. These changes were accompanied by distinct changes in the bilayer phase constitution and proportions of hard and soft phases produced by interdiffusion of the Co and CoPt layers which altered the overall anisotropy and associated magnetic behavior of the system. To support these conjectures micromagnetic modeling of different conditions of the bilayer properties showed that changing the relative proportions of the hard and soft layers could indeed lead to changes in the magnetic behavior similar to those observed in the experimental systems. Both the experimental and modeling-derived results of this work demonstrate that the bulk technical properties of a hard/soft magnetic nanocomposite material depend on the relative proportions of the phases present, the degree of exchange coupling across the interface between those phases as well as on the physical and magnetic properties of those phases. Changing the physical properties of the phases in systematic ways allows the magnetic properties of the ensemble to be tailored.     

Nanocrystalline and nanocomposite permanent magnets by melt spinning technique

The melt-spinning technique offers an opportunity for tailoring magnetic properties by controlling the structures and microstructures in both single-phase and composite magnets. This review first broadly discusses the principle of cooling control, amorphization, crystallization, annealing, and consolidation of the melt-spun ribbons. The phase, microstructure,and magnetic properties of popular single-phase nanocrystalline magnets are reviewed, followed by the nanocomposite magnets consisting of magnetically hard and soft phases. The precipitation-hardened magnetic materials prepared by melt spinning are also discussed. Finally, the role of intergrain exchange coupling, thermal fluctuation, and reversible/irreversible magnetization processes are discussed and correlated to the magnetic phenomena in both single-phase and nanocomposite magnets.     

Explicit solutions to phenomenological models of magnetization reversal of thin ferromagnetic films in the presence of a sawtooth magnetic field

Explicit solutions are derived for several phenomenological models of magnetization reversal in thin ferromagnetic films driven by a sawtooth magnetic field. For a domain wall velocity that is linear in the magnetic field, it is found that the dynamic coercive field follows a square-root power-law in the slope of the magnetic field, shifted by the depinning field. For a more general domain wall velocity different power-law exponents are found, yet the overall form for the scaling of the area of the hysteresis loop remains a power-law shifted by the depinning field. This shifted power-law could be interpreted to be a crossover between adiabatic and dynamic regimes.     

Tailor-made nano-structured materials for perpendicular recording media and head—precise control of direct/indirect exchange coupling

Tailor-made nano-structured spin materials obtained by precisely controlled nano-scale fabrication technologies for use in ultra-high density hard disk drives (HDDs), as well as an understanding of their nanomagnetics, are essential from the view point of materials, processes, and physics. Artificial control of the exchange coupling among ferromagnetic layers through the RKKY interaction (indirect) and direct exchange coupling represented as the exchange bias at the ferromagnetic (FM)/antiferromagnetic (AFM) interface are of great interest and have received significant attention to induce new modulated spin structures in conventional simple FM materials. In particular, soft magnetic under layer (SUL) with strong synthetic antiferromagnetic (SAF) coupling between two adjacent soft magnetic layers, exchange coupled stacked media introducing exchange coupling between FM layers and giant exchange anisotropy at the FM/AFM interface have attracted significant attention from the view point of applications. Within the framework of the present paper, we discuss future technical trends for SUL, granular media and the spin-valve head from the viewpoint of direct and/or indirect exchange coupling based on our recent results.     

Study of the magnetic interaction in nanocrystalline Pr-Fe-Co-Nb-B permanent magnets

The magnetic properties of an isotropic, epoxy resin bonded magnets made from Pr-Fe-Co-Nb-B powder were investigated. The magnetization reversal process and magnetic parameters were examined by measurements of the initial magnetization curve, major and minor hysteresis loops and sets of recoil curves. From the initial magnetization curve and the field dependencies of the reversible and irreversible magnetization components derived from the recoil loops it was found that the magnetization reversal process is the combination of the nucleation of reversed domains and pinning of domain walls at the grain boundaries and the reversible rotation of magnetization vector in single domain grains. The interactions between grains were studied by means of δM plots. The nonlinear behavior of δM curve approve that the short range intergrain exchange coupling interactions are dominant in a field up to the sample coercivity.The interaction domains and fine magnetic structure were revealed as the evidence of exchange coupling between soft α-Fe and hard magnetic Nd₂Fe₁₄B grains.     

Anisotropic nanocomposite soft/hard multilayer magnets

Experimental and theoretical researches on nanostructured exchange coupled magnets have been carried out since about 1988. Here, we review the structure and magnetic properties of the anisotropic nanocomposite soft/hard multilayer magnets including some new results and phenomena from an experimental point of view. According to the different component of the oriented hard phase in the nanocomposite soft/hard multilayer magnets, three types of magnets will be discussed:1) anisotropic Nd_2Fe_(14)B based nanocomposite multilayer magnets, 2) anisotropic SmCo_5 based nanocomposite multilayer magnets, and 3) anisotropic rare-earth free based nanocomposite multilayer magnets. For each of them, the formation of the oriented hard phase, exchange coupling, coercivity mechanism, and magnetic properties of the corresponding anisotropic nanocomposite multilayer magnets are briefly reviewed, and then the prospect of realization of bulk magnets on new results of anisotropic nanocomposite multilayer magnets will be carried out.     

Effect of the soft layer thickness on magnetization reversal process of exchange-spring nanomagnet patterns

A systematic study of the magnetization reversal behavior in the regular arrangement of L1₀-FePt based exchange-spring nanomagnets with different thicknesses of the Co soft magnetic layer is presented. The magnetic property of the hard magnet is compared to two tuned exchange-spring magnets: its systems of 20 nm L1₀-FePt/3 nm, and 7 nm Co. In particular, we focus on the switching field distribution. The exchange coupling showed narrower SFD, in spite of the decoupled part switches earlier. The magnetization switching mechanism of exchange-spring nanomagnets patterns has been revealed with a first-order reversal curves technique and the switching field distribution. Further, the microscopic results using magnetic force microscopy show that the spin rotation of the non-interacting part in the thicker soft layered exchange-spring magnet. The part influences the magnetization reversal process. According to the experimental results, exchange coupling strength can be tuned by the thickness of the soft magnetic layer.     

Annealing effect of NiO/Co90Fe10 thin films: From bilayer to nanocomposite

Exchange-biased bilayers are widely used in the pinned layers of spintronic devices. While magnetic field annealing (MFA) was routinely engaged during the fabrication of these devices, the annealing effect of NiO/CoFe bilayers is not yet reported. In this paper, the transition from NiO/Co₉₀Fe₁₀ bilayer to nanocomposite single layer was observed through rapid thermal annealing at different temperatures under magnetic field. The as-deposited and low-temperature (<623 K) annealed samples had rock salt (NiO) and face center cubic (Co₉₀Fe₁₀) structures. On the other hand, annealing at 623 K and 673 K resulted in nanocomposite single layers composed of oxides (matrix) and alloys (precipitate), due to grain boundary oxidization and strong interdiffusion in the NiO/CoFe and CoFe/SiO₂ interfaces. The structural transition was accompanied by the reduction of grain sizes, re-ordering of crystallites, incensement of roughness, and reduction of Ni²⁺. When measured at room temperature, the bilayers exhibited soft magnetism with small room-temperature coercivity. The nanocomposite layers exhibited an enhanced coercivity due to the changes in the magnetization reversal mechanism by pinning from the oxides. At 10 K, the increased antiferromagnetic anisotropy in the NiO resulted in enhanced coercivity and exchange bias in the bilayers. The nanocomposites exhibited weaker exchange bias compared with the bilayers due to frustrated interfacial spins. This investigation on how the magnetic properties of exchange-biased bilayers are influenced by magnetic RTA provides insights into controlling the magnetization reversal properties of thin films.     

Effect of the effective anisotropy field of soft layer on magnetic properties of soft/hard stacked media

Magnetic properties of soft/hard stacked perpendicular magnetic recording media were investigated using a two-moment model with taking account of demagnetizing energy. Demagnetizing energy of the soft layer may improve the uniformity of magnetic properties of the composite media and also decrease the interlayer thickness, although weaken the thermal stability a little. The application of high saturation magnetization (M_s) soft magnetic material as the soft layer may compensate for the undesirable contribution while maintaining its benefits.     

Magnetization reversal in CoPt-based hard–soft homocomposites

CoPt-based hard–soft sputtered bilayers with (1 1 1) texture have been produced by appropriate heat treatment of the bottom layer. Two samples with different degrees of chemical ordering of the hard layer are compared. The anisotropy of the hard layer determines its robustness against destabilization from the soft one. Detailed measurements of the soft layer minor hysteresis loop features as a function of the magnetic state of the hard layer are proposed as a means to study the nature of interfacial exchange interactions and the mechanism of magnetization reversal. When hard layer anisotropy is not robust enough, the reversed soft layer can induce irreversible changes to the magnetic structure at the interface leading to a decoupling of exchange field from the magnetic state of the hard layer.     

Nanophase hard magnets

The dramatic developments that occurred in nanophase hard magnetic materials over the last two decades are reviewed. Much of the research was done after the discovery of Nd₂Fe₁₄B-based magnets in an attempt to develop more economical Fe-based magnets with better properties. This led to the discovery of 1 : 12-based magnets, 2 : 17 nitrides and carbides, and more recently, to nanocomposite magnets consisting of a fine mixture of exchange coupled soft and hard phases. Currently, much emphasis is devoted to nanocomposite films consisting of nanoparticles of a high anisotropy material embedded in a non-magnetic matrix because they have a great potential for applications in high density recording media.     

Monte Carlo study of magnetization reversal in the model of a hard/soft magnetic bilayer

Magnetization reversal in the model of a hard/soft magnetic bilayer under the action of an external magnetic field has been investigated by the Monte Carlo method. Calculations have been performed for three systems: (i) the model without a soft-magnetic layer (hard-magnetic layer), (ii) the model with a soft-magnetic layer of thickness 25 atomic layers (predominantly exchange-coupled system), and (iii) with 50 (weak exchange coupling) atomic layers. The effect of a soft-magnetic phase on the magnetization reversal of the magnetic bilayer and on the formation of a 1D spin spring in the magnetic bilayer has been demonstrated. An inf lection that has been detected on the arch of the hysteresis loop only for the system with weak exchange coupling is completely determined by the behavior of the soft layer in the external magnetic field. The critical fields of magnetization reversal decrease with increasing thickness of the soft phase.     

Magnetization reversal in a preferred oriented (111) L1(0) FePt grown on a soft magnetic metallic glass for tilted magnetic recording

L1(0) FePt is an important material for the fabrication of high density perpendicular recording media, but the ultrahigh coercivity of L1(0) FePt restricts its use. Tilting of the magnetic easy axis and the introduction of a soft magnetic underlayer can solve this problem. However, high temperature processing and the requirement of epitaxial growth conditions for obtaining an L1(0) FePt phase are the main hurdles to be overcome. Here, we introduce a bilayered magnetic structure ((111) L1(0) FePt/glassy Fe(71)Nb(4)Hf(3)Y(2)B(20)/SiO(2)/Si) in which the magnetic easy axis of L1(0) FePt is tilted by ~36° from the film plane and epitaxial growth conditions are not required. The soft magnetic underlayer not only promotes the growth of L1(0) FePt with the preferred orientation but also provides an easy cost-effective micro/nanopatterning of recording bits. A detailed magnetic characterization of the bilayered structure in which the thickness of (111) L1(0) FePt with the soft magnetic Fe(71)Nb(4)Hf(3)Y(2)B(20) glassy underlayer varied from 5 to 60 nm is carried out in an effort to understand the magnetization switching mechanism. The magnetization switching behavior is almost the same for bilayered structures in which FePt layer thickness is >10 nm (greater than the domain wall thickness of FePt). For FePt film ~10 nm thick, magnetization reversal takes place in a very narrow field range. Magnetization reversal first takes place in the soft magnetic underlayer. On further increase in the reverse magnetic field, the domain wall in the soft magnetic layer compresses at the interface of the hard and soft layers. Once the domain wall energy becomes sufficiently large to overcome the nucleation energy of the domain wall in L1(0) FePt, the magnetization of the whole bilayer is reversed. This process takes place quickly because the domain walls in the hard layer do not need to move, and the formation of a narrower domain wall may not be favorable energetically. Our results showed that the present bilayered structure is very promising for the fabrication of tilted bit-patterned magnetic recording media.     

Extracting intergranular exchange coupling in perpendicular magnetic recording media

A micromagnetic numerical technique has been used to demonstrate how intergranular exchange coupling and intrinsic anisotropy field dispersion can be extracted from measuring two types of M-H curves. A realistic grain configuration formed by planar Voronoi cells is used to simulate perpendicular magnetic media. This technique effectively separates the effects of intergranular exchange coupling and anisotropy dispersion by finding their correlation to differentiated M-H curves with different initial magnetization states, even in the presence of thermal fluctuation. The validity of this method is investigated with a series of intergranular exchange couplings and anisotropy dispersions for different media thickness. A relationship between the auto-correlation function of an ac-erased sample and dispersion of the exchange interaction is demonstrated. Utilizing magnetization auto-correlation functions, the magnetic intergranular exchange coupling statistics show a correlation with the auto-correlation function shape in terms of zero-cross and undershoot values.     

Multilayer structures of the iron/chromium type with almost ideal interfaces in an external magnetic field

The magnetic phase diagram of the Fe/Cr/Fe three-layer structure with almost ideal interlayer boundaries was constructed. The effective interlayer interaction in this structure was described by the “half-angle coupling” model. Various system configurations were analyzed taking into account crystalline anisotropy, and the ground state of the system was determined. The behavior of the structure in an external magnetic field applied along easy and hard magnetic axes was studied. The magnetization curves M(H) characteristic of structures with various interface roughness parameter and interlayer exchange values were described and analyzed. The experimental situation is discussed.     

Layer resolved magnetization reversal study in SmCo5/Fe nanocomposite bilayers

A hard/soft SmCo5/Fe nanocomposite magnetic bilayer system is fabricated on x-ray transparent 100-200 nm thin Si3N4 films by magnetron sputtering.The microscopic magnetic domain pattern and its behaviours during magnetization reversal in the hard and the soft magnetic phases are studied separately by element specific magnetic soft x-ray microscopy at a spatial resolution of better than 25 nm.We observe that the domain patterns for the soft and hard phases show coherent behaviours in varying magnetic fields.We derive local M(H) curves from the images of Fe and SmCo5 separately and find the switches for hard and soft phases to be the same.     

Hard magnetic CoCr layer in ferromagnetic tunnel junctions

In magnetic tunnel junctions a highly spin-polarizing layer is usually exchange biased by an antiferromagnetic layer, an artificial antiferromagnetic layer system or a combination of both, while the magnetically soft layer is free to rotate. The use of a single layer of a hard magnetic material is rarely investigated up to now. In this paper, we present the electric and magnetic properties of tunnel junctions with a hard magnetic Co₈₃Cr₁₇ layer. The soft magnetic electrode consists of either a single Co layer or a Co/Ni₈₀Fe₂₀ bilayer. The magnetic anisotropy and coercive field H_C of the CoCr layer depend on its thickness and the kind of the bottom layer (Cu or Ta) and can vary from H_C=50–700 Oe. It is found that a thin Co cap layer also influences the hysteretic behavior. Furthermore, only small changes after annealing up to 450°C promise a high thermal stability for the application in magnetic tunnel junctions. Measurements of the tunnel magnetoresistance on large area junctions, however, show a strong magnetic coupling of the hard and soft electrodes.