圆盘状Bi2WO6-BiPO4异质结的水热合成及光催化性能 (cited: 1)

采用水热法制备Bi₂WO₆-BiPO₄异质结光催化剂．利用模拟太阳光照射下的罗丹明B降解实验评价了Bi₂WO₆-BiPO₄复合物的光催化性能．结果表明,Bi₂WO₆-BiPO₄光催化活性比Bi₂WO₆和BiPO₄高得多．当Bi₂WO₆与BiPO₄的摩尔比为1:1时复合光催化剂对罗丹明B的降解率最高．Bi₂WO₆-BiPO₄催化活性增强主要归结为两者之间形成了有效的异质结结构,其内建电场能够促进光生载流子的分离．同时,Bi₂WO₆的加入增强了其对可见光的吸收．研究表明O₂· ^-和h⁺在光催化降解过程中是主要的活性物种     

网状钼酸铋的可见光催化活性

采用无助剂、无模板的水热法成功合成网状Bi₂MoO₆. pH值对这一形貌的形成起重要作用. 所制备的网状Bi₂MoO₆样品表现出优异的可见光催化活性,其光催化活性比固相法合成的块状Bi₂MoO₆样品高得多.     

二维GaTe/Bi2Se3异质结：一类有潜力的Z型光解水催化剂

本文基于第一性原理方法，计算了二维GaTe/Bi₂Se₃异质结的电子结构、界面电荷转移、静电势分布、吸收光谱及光催化性质. 计算结果表明异质结是一个小能隙的准直接半导体，能有效捕获太阳光. 由于相对较强的界面內建极化电场和带边轻微弯曲，导致异质结中的光生电子和空穴分别有效分离在GaTe单层和Bi₂Se₃薄片上，可用于析氢和产氧. 这些理论计算结果意味着二维GaTe/Bi₂Se₃异质结是一类有潜力的Z型太阳能全解水催化剂.     

Bi2WO6光催化剂的γ射线辐射效应

本文首次研究了高能辐射(γ射线)对Bi₂WO₆纳米晶体结构和光催化性能的影响. 结果表明,尽管高能辐射不会改变Bi₂WO₆纳米晶体的形貌,但是Bi₂WO₆粉末的颜色在高吸收剂量辐照(507 kGy)后发生了明显的变化,并且辐照后Bi₂WO₆的XRD谱图也显示,随着吸收剂量的增加,(113)晶面对应的2θ从28.37°移到28.45°,说明晶格参数在γ射线辐照下还是发生了细微的变化. XPS表征结果证明,Bi₂WO₆晶体结构的变化源于高剂量辐射下氧空位缺陷的产生. Bi₂WO₆纳米晶体的禁带宽度(E_g)随吸收剂量的增加也出现减小的趋势. 用水溶液中亚甲基蓝的可见光照分解反应作为模型反应考察了辐照后的Bi₂WO₆纳米晶体的光催化活性,结果表明,辐照后的Bi₂WO₆纳米晶体的光催化活性随着吸收剂量的增加而逐渐升高. 将经过反应后的Bi₂WO₆纳米晶体再次回收,进行循环催化,发现这些辐照后的Bi₂WO₆纳米晶体在三次循环使用后光催化性能仍然能够保持,说明高能辐射产生的氧空位缺陷具有良好的稳定性.     

Ag-Cu纳米颗粒修饰的N掺杂TiO2纳米棒阵列及其高效光催化CO2还原应用

本文采用微纳加工方法制备了负载高密度Ag-Cu纳米颗粒的N掺杂TiO₂纳米棒阵列样品. 通过TiO₂的N掺杂,可将其吸光范围调控至与Ag纳米颗粒的等离激元吸收频率相匹配的波段,从而实现复合材料中肖特基结与共振能量转移过程的协同作用. 与此同时,Cu纳米颗粒可以为CO₂还原提供活性位点. 在全谱光照射下,复合样品光催化CO₂还原的活性显著提高,CH₄生成速率可达720 μmol·g^-1·h^-1.     

pH值对水热法制备的Bi4Ti3O12晶体光催化活性的影响

采用无助剂、非模板的水热法可控制备Bi₄Ti₃O₁₂ (BIT)晶体．通过调节反应物的pH值可以选择性地获得BIT纳米球、纳米带和纳米片．通过对不同pH值制备的样品的结构分析研究了这些不同形貌的形成机制．pH值为1制备的BIT样品在可见光下光催化活性最高．基于不同pH值制备的BIT样品的形状、尺寸和局部结构振动分析了光催化活性不同的原因．     

复合层状Bi7Ti4NbO21铁电陶瓷的结构与介电和压电性能研究

制备了Bi₇Ti₄NbO_{21，Bi4Ti3O12及Nb掺杂Bi4Ti3O12(Nb-Bi4Ti3O12)层状结构铁电陶瓷材料.结合Nb-Bi 4Ti3O12的介电温谱和 退极化实验结果，研究了Bi7Ti4NbO21的晶体结构 对其介电、压电性能的影响 .高分辨透射电镜结果表明，在Bi7Ti4NbO21中， 沿着c轴方向，(Bi2Ti3O10)^2-和(BiTiNbO7)^2-两个类钙钛矿层分别 与(Bi2O2)²⁺层叠加堆积而成.这种晶体结构决定了Bi7Ti4NbO21的 介电温谱在668℃和845℃出现介 电双峰.结合极化样品的退化实验分析，说明材料在这两个温度附近发生了铁电—铁电相变 、铁电—顺电相变，分别是(Bi2Ti3O10)^{2-< /sup>和(BiTiNbO7)2-层状 结构发生微观结构相变的结果.在退极化过程中，由于受热时钙钛矿层内空位引起的缺陷偶 极子的定向排列受到破坏，引起材料部分退极化，表现为300℃热处理后Bi7Ti 4NbO 21的压电活性降低了10%，显示了室温下材料的压电性能来源于自发极化的固有电 偶极子和缺陷偶极子的共同贡献.}}     

Nd掺杂对Bi4Ti3O12铁电薄膜的微结构和铁电性能的影响

利用溶胶-凝胶法在Pt/Ti/SiO₂/Si(100)衬底上制备了Nd掺杂Bi₄Ti₃O₁₂(Bi_4-xNd_xTi₃O₁₂, x=0.00,0.30,0.45,0.75,0.85,1.00,1.50)铁电薄膜样品.研究了Nd掺杂对Bi₄Ti₃O₁₂薄膜的微结构和铁电性能的影响.研究结果表明:Nd掺杂未改变Bi₄Ti₃O₁₂薄膜的基本晶体结构.在掺杂量x<0.45时,Nd³⁺只取代类钙钛矿层中的A位Bi³⁺.当x=0.45时,样品剩余极化强度达最大值,在270kV·cm^-1的电场下为32.7μC·cm^-2.掺杂量进一步增加时,结构无序度开始明显增大,Nd³⁺开始进入(Bi₂O₂)²⁺层,削弱其绝缘层和空间电荷库的作用,导致材料剩余极化逐渐下降.当掺杂量x达到1.50时,掺杂离子最终破坏(Bi₂O₂)²⁺层的结构,材料发生铁电-顺电相变.     

掺铋BaF2晶体的制备及其近红外发光研究

通过温度梯度法制备了Bi₂O₃:BaF₂以及BiF₃:BaF₂晶体.在Bi₂O₃:BaF₂晶体中观察到了发光峰位于961 nm,半高宽202 nm的超宽带红外发光.在BiF₃:BaF₂晶体中检测到Bi²⁺和Bi³⁺可见区的发光,但是没有观察到红外发光.通过γ射线辐照实现了BiF₃:BaF₂晶体的近红外发光, 发光峰位于1135 nm,半高宽192 nm.讨论了Bi₂O₃和BiF₃掺杂BaF₂晶体的红外发光的机理.     

大规模合成具有氧空位的多孔Bi2O3用于有效降解亚甲基蓝

光催化降解有机污染物由于其具有低能耗和绿色环保的特点，已经成为研究的热点. 氧化铋纳米晶体的带隙在2.0∽2.8 eV之间，利用它催化可见光降解有机污染物具有较高的活性，从而引起了越来越多的关注. 尽管近年来已经开发了几种制备Bi₂O₃基半导体材料的方法，但是仍然难以用简单的方法大规模地制备高活性的Bi₂O₃催化剂. 因此，开发简单可行的大规模制备Bi₂O₃纳米晶体的方法对于工业废水处理的潜在应用具有重要意义. 本文通过蚀刻商用BiSn粉末，然后进行热处理，成功地大规模制备了多孔Bi₂O₃. 获得的多孔Bi₂O₃在亚甲基蓝(MB)的光催化降解中表现出优异的活性和稳定性. 对该机理的进一步研究表明，多孔Bi₂O₃合适的能带结构允许生成活性氧物种，例如O₂^-·和·OH，可有效降解MB.     

Flowerlike PtCl4/Bi2WO6 composite photocatalyst with enhanced visible-light-induced photocatalytic activity

Flowerlike PtCl₄/Bi₂WO₆ composite photocatalyst was successfully synthesized through a simple two-step method involving a template-free hydrothermal process and the following impregnation treatment. The samples were fully characterized by the study of X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis absorption spectra. The results indicated that the doping of Pt species did not affect the crystal structure and the morphology of Bi₂WO₆ photocatalyst, but it had great influences on the photocatalytic activity of Bi₂WO₆ towards rhodamine-B (RhB) degradation. Besides, the Pt species was found to be present as PtCl₄ in the composite samples, and also an optimal Pt species content on the surface of Bi₂WO₆ photocatalyst was discovered with the highest photocatalytic ability. The improved photocatalytic performance could be ascribed to the enhanced interfacial charge transfer and the inhibited recombination of electron-hole pairs. Meanwhile, a possible mechanism for RhB photocatalytic degradation over PtCl₄/Bi₂WO₆ catalyst was also proposed.     

Bi2MoO6纳米片/TiO2纳米棒阵列复合材料的制备及其可见光响应光电催化性能研究

Novel Bi₂MoO₆/TiO₂ heterojunction was fabricated by growing Bi₂MoO₆ nanosheets arrays on the vertically aligned TiO₂ nanorods arrays via a two-step solvothermal method. The obtained Bi₂MoO₆/TiO₂ hierarchical heterojunction showed excellent visible light photoelectrochemical performance. Compared with the pure TiO₂ and Bi₂MoO₆, the photocurrent density of the heterojunction was increased 57 and 29 times, respectively. Furthermore, the hydrogen generation rate of the Bi₂MoO₆/TiO₂ for photoelectrocatalytic water-splitting was about 6 times higher than that of the pure Bi₂MoO₆. The improved performance can be attributed to the synergistic effects of enhanced absorption of visible light, increase of migration rate and separation efficiency of photo-induced carriers.     

Fabrication and efficient visible light-induced photocatalytic activity of Bi2MoO6/BiPO4 composite

Novel Bi₂MoO₆/BiPO₄ composites with heterojunction structure were fabricated by a one-step hydrothermal method. The photocatalytic properties of Bi₂MoO₆/BiPO₄ composites were evaluated by photocatalytic degradation of rhodamine B (Rh B) under visible light irradiation (λ>420 nm). The results showed that Bi₂MoO₆/BiPO₄ photocatalysts showed much higher photocatalytic activity for the Rh B degradation than the pure BiPO₄ and Bi₂MoO₆ under visible light. The best photocatalytic performance of Bi₂MoO₆/BiPO₄ with about 98.0% Rh B degradation located at molar ratio of 2:1 under visible light illumination for 30 min. The enhanced photocatalytic activity could be mainly ascribed to the formation of heterojunction interface in Bi₂MoO₆/BiPO₄ composites, which is beneficial to the transfer and separation of photogenerated electron–hole pairs, as well as the strong visible light absorption resulting from the sensitization role of Bi₂MoO₆ to BiPO₄. It was also observed that the photodegradation of Rh B is chiefly attributed to the oxidation action of the generated O₂⁻ radicals and the action of h_vb⁺ through direct hole oxidation process.     

Effects of surface-modification with Bi2O3 on the thermal stability and photoinduced charge property of nanocrystalline anatase TiO2 and its enhanced photocatalytic activity

Bi₂O₃ surface-modified TiO₂ nanoparticle has been synthesized by sol-hydrothermal processes, followed by post-treatment with an appropriate amount of bismuth nitrate solution, and also characterized by XRD, Raman, BET, TEM, FT-IR, XPS, UV-vis DRS and SPS techniques. The effects of the surface-modification with Bi₂O₃ on the thermal stability, photoinduced charge separation and photocatalytic activity for degrading rhodamine B (or phenol) under ultraviolet (or visible) irradiation are investigated in detail, along with their relationships and the activity enhancement mechanisms are also suggested. The results show that the modification with Bi₂O₃ can improve the thermal stability of the as-prepared anatase crystallites, consequently enhancing the anatase crystallinity so as to promote the photoinduced charge separation. And the modification with Bi₂O₃ also extends the optical response range. It can be concluded that the activity enhancement of surface-modified TiO₂ is mainly attributed to the increase in the photoinduced charge separation rate and to the extent of the optical response range, compared with un-modified ones. Moreover, the inhibition phase transformation mechanism related to Bi₂O₃ is suggested.     

低维Bi2Fe4O9晶体的控制生长及其光催化性能研究

Low-dimensional Bi₂Fe₄O₉ nanosheets and microrods have been selectively prepared by a solvothermal method, from which the growth of the Bi₂Fe₄O₉ crystals can be controlled by the variation of reaction conditions. Structure determination showed that the nanosheets are mainly exposed by {001} facets while the microrods are exposed by {110} facets. Ab- sorption spectra revealed that there are two bandgaps observed for both nanosheets (at 1.9 and 1.55 eV) and microrods (1.7 and 1.45 eV), and they both would be available for the sunlight photocatalysis e ciently due to the intensive absorption ability in a wide region. Photocatalytic investigation demonstrated that the overall photocatalytic performance of the microrods is prior to that of the nanosheets due to the variation of bandgaps and exposed facets. The present report provides a useful alternative strategy for the controlling growth of nanostructures and/or microcrystals besides the present demonstration of the Bi₂Fe₄O₉ crystals with diflerent bandgaps and facets that would be able to tune the corresponding photocatalytic ability selectively.     

Sol-gel growth of Gd2MoO6:Eu nanocrystalline layers on SiO2 spheres (SiO2@Gd2MoO6:Eu) and their luminescent properties

SiO₂@Gd₂MoO₆:Eu³⁺ core-shell phosphors were prepared by the sol-gel process. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra as well as kinetic decays were used to characterize the resulting SiO₂@Gd₂MoO₆:Eu³⁺ core-shell phosphors. The XRD results demonstrate that the Gd₂MoO₆:Eu³⁺ layers on the SiO₂ spheres begin to crystallize after annealing at 600 °C and the crystallinity increases with raising the annealing temperature. The obtained core-shell phosphors have a near perfect spherical shape with narrow size distribution (average size ca. 600 nm), are not agglomerated, and have a smooth surface. The thickness of the Gd₂MoO₆:Eu³⁺ shells on the SiO₂ cores could be easily tailored by varying the number of deposition cycles (50 nm for four deposition cycles). The Eu³⁺ shows a strong PL luminescence (dominated by ⁵D₀-⁷F₂ red emission at 613 nm) under the excitation of 307 nm UV light. The PL intensity of Eu³⁺ increases with increasing the annealing temperature and the number of coating cycles.     

Combinatorial exploration of flux material for Bi4Ti3O12 single crystal film growth

The combinatorial approach to materials synthesis was employed for the quick screening of a flux material for liquid phase-mediated epitaxy of Bi₄Ti₃O₁₂ single crystal film. A series of ternary flux libraries composed of two self-fluxes (Bi₂O₃ and Bi₄Ti₃O₁₂) and an impurity flux (VO_x, WO_x, CuO_x, BiPO_x, BaO, MoO_x) were fabricated on the SrTiO₃ (0 0 1) substrates. Then, stoichiometric Bi₄Ti₃O₁₂ was grown on each one of these flux libraries at a temperature presumed to melt the flux. High-throughput characterization with the concurrent X-ray diffraction (XRD) method resulted in the discovery of a novel flux material, CuO, containing Bi₂O₃, for Bi₄Ti₃O₁₂ single crystal film.     

氧氩比对SnO2/Ag/SnO2透明导电膜光电性能的影响

在室温及不同的氧氩比条件下,采用射频磁控溅射Ag层和直流磁控溅射SnO₂层,在载玻片衬底上制备出了SnO₂/Ag/SnO₂多层薄膜.用霍尔效应测试仪、四探针电阻测试仪和紫外-可见-近红外光谱仪等表征了薄膜的电学性质和光学性质.实验结果表明:当氧氩比为1:14时,所制得的薄膜的光电性质优良指数最大,为1.69×10^-2 Ω^-1;此时,薄膜的电阻率为9.8×10^-5 Ω·cm,方电阻为9.68 Ω/sq,在400~800 nm可见光区的平均光学透射率达85%;并且,在氧氩比为1:14时,利用射频磁控溅射Ag层和直流磁控溅射SnO₂层在PET柔性衬底上制备出了光电性质优良的柔性透明导电膜,其在可见光区的平均光学透过率达85%以上,电阻率为1.22×10^-4 Ωcm,方电阻为12.05 Ω/sq.