垒下重离子诱发裂变的Monte Carlo模拟

在简单的物理模型下建立了描述垒下重离子诱发裂变过程的ＭｏｎｔｅＣａｒｌｏ模拟程序，用于计算转移裂变和复合核裂变碎片的质量，核电荷数，能量及角度分布和角关联。模拟中考虑了在不同反应道中碎片物理量的坐标系变换，各物理量分在产生的运动关联。模拟中考虑了在同反应道顺的理量的坐标系变换。各物理量分布产生的运动关联。模拟中考虑了发射和裂后碎粒子蒸发对碎片角分布及角关联的影响。模型结果可直接和实验测量进行比较，     

基于裂变γ标识技术的瞬发裂变中子谱测量新方法

瞬发裂变中子谱（prompt fission neutron spectrum,PFNS）是用于核实验诊断过程中十分重要的参数数据,传统的测量主锕系核素（U,Pu）PFNS的技术手段是采用裂变室,利用裂变碎片标识裂变中子,通过中子飞行时间技术获得裂变中子谱.目前出现了一种新的用于PFNS测量的技术,其原理是基于如下的物理事实：在一次裂变过程中,释放中子的同时伴随着释放7–8个γ射线光子,而非弹性散射效应产生的γ射线光子只有1–2个.据此,可以通过裂变γ射线的多重性将裂变中子和其他杂散中子甄选出来,达到测量PFNS的目的.本文建立了基于裂变γ标识技术的PFNS测量实验系统.利用该系统对²⁵²Cf中子源的PFNS进行了实验测量,测量结果与传统的裂变碎片标识法及ENDF/B-VⅡ数据库的标准谱进行了比较,对新方法的裂变标识率以及实验不确定度也一并进行了分析.     

低能裂变反应的碎片角动量激发机制研究

用一个包含了半导体探测器, 液体闪烁计数器和60%效率的HPGe探测器的四参数关联实验测量了²⁵²Cf(sf)反应的中子多重性和γ多重性与裂变碎片特征参数(质量, 总动能TKE)间的关联. 由于在测量裂变中子多重性绝对值的同时, 本工作首次从实验数据确定了特定碎片的γ多重性的绝对值, 故测量数据为进一步深入研究碎片角动激发提供了新的信息. 结果表明, 角动激发并不与裂变核在断点的形变成正关联, 但两者间却存在着复杂的关联特性. 实验数据不能从现有核理论的弯曲(bending)和扭动(wriggling)碎片角动量激发模式得到理解; 但可用碎片角动激发与裂变核的断点核激发能存在正关联而得到部分解释.     

4He闪烁裂变中子探测器时间响应

研制了可用于脉冲辐射场中子探测的4He闪烁裂变中子探测器,并对其时间响应进行了理论和实验研究。采用经验公式和蒙特卡罗方法模拟计算了不同厚度裂变靶产生的裂变碎片和不同能量中子产生的反冲4He核在4He气中的飞行时间,并依据卷积原理推导出探测器的时间响应计算公式。计算结果表明,探测器的波形上升时间约为19.5 ns,半高宽约31.0 ns。用ING-103型稠密等离子体聚焦装置(DPF)脉冲中子发生器对探测器的时间响应进行了实验测量,实验结果与理论值基本一致。     

重离子裂变反应碎片角分布

本工作采用固体核径迹探测器和金硅面垒型半导体探测器测量了¹²C+¹⁸¹Ta,¹⁹⁷Au,Pb和²⁰⁹Bi以及¹⁴N+Pb裂变反应碎片角分布.还借助于已经发表的若干裂变反应碎片角分布数据,在可裂变参数Z²/A,激发能E和角动量I较宽的范围内,用碎片角分布统计断点模型分析了重离子裂变反应碎片角分布数据.结果表明,统计断点模型能够解释重离子裂变反应碎片角分布.     

16O+232Th垒下全熔合裂变

利用裂变碎片的折叠角分布,从实验上实现了全熔合裂变和转移跟随裂变两种成份的区分.在此基础上测量了质心系能量72.61至80.11MeV ¹⁶O+²³²Th全熔合裂变截面和碎片角分布.包含靶核静态形变效应的耦合道模型计算与实验激发曲线一致.然而,裂变统计理论无法解释实验上观察到的全熔合裂变碎片角分布.而鞍点模型与断点模型的理论预言有较明显的差别.     

84.0MeV16O轰击238U核的裂变碎片角关联的测量

使用两块大面积位置灵敏双栅雪崩计数器,测量了84.0MeV¹⁶O轰击²³⁸U核的裂变碎片角关联及角分布.用裂变碎片折叠角技术区分了熔合裂变反应中的复合核裂变和转移裂变的两种成份.在总裂变截面中,转移裂变的贡献约为10%.由于转移裂变碎片角分布的各向异性较小,扣除转移裂变贡献后,纯复合核裂变碎片各向异性提高5%左右.裂变碎片异性异常不可能仅仅来源于转移裂变的贡献.     

裂变碎片靶室在直接测量重Λ超核寿命中的应用

介绍了一种新的直接测量重超核寿命的方法. 并对其中用到的一个重要探测设备——裂变碎片靶室——在托马斯.杰斐逊国家实验室用²⁵²Cf放射源进行了测试. 该靶室的单模块时间分辨率为～163ns. 在此分辨率的基础上, 计算机模拟表明用此方法测到的超核寿命误差将在9.6ps左右.     

确定裂变断点构形的一个模型

确定裂变核的断点构形是裂变物理中的一个重要问题.本文给出一个对一有缩颈的裂变核形状判断其是否会立即断裂的能量判据:在保持裂变核体积守恒和形状基本不变的条件下,如果核的形变能随其颈部变细而增加,则认为裂变核暂时不会断裂;反之,如果形变能随颈部变细而单调下降,则认为裂变核立即发生断裂.并采用适于描写颈部消失过程的形状参数化方法对²³⁵U（n,f）体系的几种质量分配的断后现象进行了统计模型的计算（入射中子能量从0—14Mev）,这包括碎片的平均动能;电荷分布和质量分布.计算结果均与实验符合较好,证明了所提断点模型的合理性.     

裂变碎片靶室在直接测量重A超核寿命中的应用(英文)

介绍了一种新的直接测量重超核寿命的方法.并对其中用到的一个重要探测设备——裂变碎片靶室——在托马斯·杰斐逊国家实验室用~(252)Cf放射源进行了测试.该靶室的单模块时间分辨率为～163ns.在此分辨率的基础上,计算机模拟表明用此方法测到的超核寿命误差将在9.6ps左右.     

用于快中子探测的裂变电离室实验及模拟结果比较(英文)

本文报道了一种用于快中子测量的裂变电离室的实验及模拟结果对比,该电离室的裂变材料为238U,分别电镀在电离室的阳极和阴极。裂变电离室通常有三种工作模式:脉冲模式、均方电压模式和电流模式,从而在大动态范围内实现中子注量测量。我们利用252Cf中子源对工作在脉冲模式的裂变电离室效率进行了测量,同时为了评估均方电压模式和电流模式,测量了裂变电离室在不同气压下的脉冲幅度,并通过Geant4蒙特卡罗软件对裂变电离室的脉冲幅度进行了模拟。模拟可以解释实验结果,当工作气压是2.64×105 Pa时探测效率最高[（4.30±0.7）×10-7],且裂变碎片能谱清晰,表明裂变电离室可以工作在不同模式下。     

Nuclear charge distribution of mass-separated isobars from thermal-neutron-induced fission of 235U

The nuclear charge distribution of fission products with mass numbers A = 90, 91, 94, 99, 100, 101 and 104 provided by the mass separator “Lohengrin” was measured. Adjacent elements in the group of the light fission products could be separated by their different energy loss in a carbon absorber. The Z-yields were found to be strongly dependent on the kinetic energy of the fission products. The widths of the nuclear charge distributions are very small, in general, and strongly dependent on A as well as on the kinetic energy. The influence of the neutron evaporation and odd-even effects are clearly detected. An asymmetric nuclear charge distribution was found for A = 104 indicating the suppression of fission fragments with Z = 43. The average nuclear charges of the fission products at their average kinetic energy are in good agreement with the results from measurements of the number of β-decays and K X-ray measurements. The average nuclear charge of the isobar A = 132 was measured at its average kinetic energy with a calibrated secondary electron detector to be Z = 51.14 ± 0.15 which is in very good agreement with the radiochemical results. Thus previous physical measurements indicating a large independent yield for the doubly magic nucleus ¹³²Sn could not be confirmed.     

The influence of pairing and nuclear structure on the thermal-neutron-induced fission of235U

The mass separated fission product beam provided by the mass separator “Lohengrin” has been used to determine the nuclear charge distribution for the thermal-neutron-induced fission of²³⁵U for all light fission products in the region 80≦A≦107. The measurements were performed at the most probable kinetic energy of the fission products. By using the known fission product mass yields, the independent yields for a total number of 100 nuclides were obtained under the condition of the most probable kinetic energy. The proton pairing effect modulates the average nuclear charge of the fission fragments and the isobaric charge distribution widths in a regular fashion. The probabilities of breaking a pair and of forming fragments with an energetically unfavourable neutron-to-proton ratio are found to compete with each other. Both probabilities depend on the mass split and reach their maximum values in the region of the most probable masses. The odd-even-proton effect is found to vary smoothly between 16% for the most abundant mass splits and 40% for the rare mass splits. The odd-even-neutron effect exhibits maxima nearN=50 andN=60, where it reaches 16%. These maxima and the extremely low Tcyield (0.13±0.05%) are discussed with regard to fragment shell effects.     

Fission product energies and anisotropies following complete fusion of16O+238U

Radioactive recoil techniques have been developed for measuring angular distributions and range distributions of individual fission products following heavy ion induced fission. From these measurements, values can be extracted for the recoil velocity of the fissioning nucleus, the velocity imparted by fission, and the fission anisotropy. These techniques were applied to reactions of 101 MeV¹⁶O on²³⁸U, and confirmed that the reaction mechanism is essentially entirely complete fusion-fission. Accepting this, the data determine the kinetic energy release in forming the various products to a precision of 1%; while the overall magnitude of the energy is in good agreement with previous results, the data suggest a systematic correlation between kinetic energy and the position of a product on the nuclear charge dispersion curve, not previously reported, which is similar to but significantly larger in magnitude than the effect expected from simple Coulomb repulsion. Significant variations in anisotropy are also observed between products, which appear to be partially correlated with the variations in kinetic energy.     

Fission yields at different fission-product kinetic energies for thermal-neutron-induced fission of 239Pu

At the recoil spectrometer “Lohengrin” of the Institut Laue-Langevin in Grenoble, the yields of the light fission products from the thermal-neutron-induced fission of ²³⁹Pu were measured as a function of A, Z, the kinetic energy E and the ionic charge states q. The nuclear charge and mass distributions summed over all ionic charge states were determined for different light fissionproduct kinetic energies between 93 and 112 MeV. The proton odd-even effect which was measured to be (11.6 ± 0.6)% causes considerable fine structure in the yields. The average kinetic energy of even-Z elements in the light fission-product group is 0.3 ± 0.1 MeV larger than for odd-Z elements. The neutron odd-even effect is (6.5 ± 0.7)%. The comparison with previously published data ¹) for thermal-neutron-induced fission of ²³⁵U reveals a correlation between the proton odd-even effect in the yield and in the kinetic energy of the elements. The dependence of the proton odd-even effect on the fragmentation is very similar for ²³⁵U and ²³⁹Pu when it is considered as a function of the nuclear charge of the heavy fission products. The isobaric variances σ_z². for thermal-neutron fission of ²³⁵U and ²³⁹Pu coincide at all kinetic energies if the influence of the proton odd-even effect is averaged out. This supports the hypothesis that the magnitude of σ_z² is determined only by quantum-mechanical zero-point fluctuations. The influence of the spherical shells Z = 50 and N = 82 on the fragmentation is discussed.     

Fission fragment distribution following antiproton absorption at rest on238U

The distribution of nuclei resulting from the annihilation of stopped antiprotons on²³⁸U has been studied by an off-line measurement of the residual radioactivity. It was found that the probability of fission exceeds 84% (68% c.l.). The charge and mass distributions of the fission products can be separated into two parts, a more frequent symmetric component originating from high energy fission (excitation energy between 100 MeV and 1 GeV) and an asymmetric component from low energy fission (excitation energy less than 40 MeV).     

Fission Energy Surfaces and Ternary Fission

A three-center phenomenological model, able to explain qualitatively the recently obtained experimental results concerning the quasimolecu-lar stage of a light-particle accompanied fission process is presented. It was derived from the liquid drop model under the assumption that the aligned configuration, with the emitted particle between the light and heavy fragment, is reached by increasing continuously the separation distance, while the radii of the heavy fragment and of the light particle are kept constant. In such a way, a new minimum appears in the deformation energy at a separation distance very close to the touching point. This minimum allows the existence of a short-lived quasi-molecular state, decaying into the three final fragments. The influence of the shell effects is discussed. The half-lives of some quasimolecular states which could be formed in the ¹⁰Be and ¹²C accompanied fission of ²⁵²Cf are roughly estimated to be of the order of 1 ns and 1 ms, respectively.     

中能核反应中反应平面的确定

介绍并分析了中高能核反应过程中与反应平面相关的可观测量 ,以及确定核反应平面的各种方法 .这些方法包括裂变碎片方位角测量、类弹碎片测量、动量流球形张量、横向动量的方向性、方位角关联和Fourier谐波分析等 . Observables that related to the nuclear reaction plane in intermediate and relativistic energy heavy ion reactions are discussed. Reaction plane determination for intermediate and relativistic energy heavy ion reactions is presented. The methods include fission fragments measurement, projectile-like fragments measurement, kinetic flow-tensor, transverse momentum directivity, azimuthal correlation, Fourier series and etc.     

锕系原子核自发裂变性质的理论研究

运用推广的液滴模型（GLDM）来确定锕系原子核的自发裂变势垒, 采用量子力学中的WKB近似方法对相应自发裂变的半衰期进行了研究。 在GLDM中, 首次考虑了微观Strutinsky壳修正对裂变势垒的影响。 理论计算的锕系区重核自发裂变半衰期与实验值符合得很好, 表明包括微观壳修正的GLDM可以成功研究重核的自发裂变性质。 The spontaneous fission half lives of the actinides are calculated by the WKB approximation and the potential barriers are constructed by a General Liquid Drop Model (GLDM) including the proximity energy, the mass and charge asymmetry, and an accurate nucleus radius. The microscopic shell correction which plays a key role for the spontaneous fission barrier is considered for the first time. The two parameter quasi molecular shape and the proximity are described in details within the GLDM. The effects of the microscopic shell correction and proximity energy for fission barrier are discussed separately. The calcula ted spontaneous fission half lives for the actinides reasonably accord with the experimental data, implying the present GLDM combined with the microscopic shell correction can be used to study the spontaneous fission properties of heavy nuclei successfully.     

Quantum description of quaternary nuclear fission

The quantum theory of binary and ternary fission is generalized to the case of recently observed quaternary nuclear fission. Formulas for the amplitudes of partial fission widths and angular and energy distributions of quaternary fission products are derived with allowance for strong channel coupling. The nonevaporation mechanism for formation of light particles is used to explain the experimentally observed decrease in the probability for emission of light particles (α, α), (α, t), and (t, t) as compared with the product of emission probabilities for the same particles in ternary fission. It is concluded that in quaternary fission, as in ternary fission, light particles escape from the neck of the fissioning nucleus much earlier than scission of the nucleus into heavy fragments occurs.