Spectroscopic investigation and Judd–Ofelt analysis of silver nanoparticles embedded Er3+-doped tellurite glass

A series of silver nanoparticles (NPs) embedded zinc-tellurite glass is prepared by melt-quenching technique. The transmission electron microscopic images reveal spherical as well as anisotropic silver NPs having average diameter in the range of 14–48 nm. The Er³⁺-free glass sample containing AgCl exhibits surface plasmon resonance (SPR) band of Ag NPs centered at ∼ 501 nm. From Judd–Ofelt analysis, it is found that by increasing the concentration of NPs, the value of Ω₂ is enhanced suggesting increased covalency and decreased symmetry around the Er³⁺ ions. Integrated emission cross-section (IEC) is enhanced as the concentration of silver NPs is increased up to 0.5 mol% AgCl. Fourier infrared spectra show that the intensity of the vibrational band of the water molecule and fundamental stretching band of OH group are suppressed. Furthermore, under an excitation wavelength of 786 nm, three prominent upconversion emissions are observed at 520 nm, 550 nm and 650 nm which are attributed to ²H_11/2 → ⁴I_15/2, ⁴S_3/2 → ⁴I_15/2, and ⁴F_9/2 → ⁴I_15/2 transitions, respectively. The upconversion emissions are enhanced significantly by introduction of silver NPs. The enhancement is mainly attributed to the local field effect of silver NPs. Studied nanocomposites are potential candidates for the development of solid state lasers.     

Enhanced blue photoluminescence and new crystallinity of Ag/organic rubrene core-shell nanoparticles through hydrothermal treatment

Light-emitting organic semiconductors have attracted considerable attention for the nanoscale fabrication of organic-based displays and their potential application in optoelectronics, plasmonics, and photonics. In this study, core-shell hybrid nanostructures of organic rubrene coated on Ag nanoparticles (NPs) have been synthesized using a chemical reduction method. The thickness of the rubrene shell was 2.6–6.0 nm and the diameter of the Ag core was 30–70 nm. The optical and structural properties of the Ag/rubrene core-shell NPs were tuned by hydrothermal (HT) treatment at 190 °C. The Ag/rubrene core-shell NPs were characterized by high-resolution transmission electron microscopy and energy-dispersive X-ray (EDX) spectroscopy before and after the HT treatment, and their structural properties were confirmed through X-ray diffraction (XRD) analysis. XRD peaks related to an orthorhombic phase were observed along with the original triclinic crystal structure of the rubrene shell, and the triclinic crystal domain size increased from 28.2 nm to 30.8 nm owing to the HT treatment. Interestingly, the green light emission (λ_em = 550 nm) of the Ag/rubrene core-shell NPs changed to blue light emission (λ_em = 425 nm), increasing in intensity through the HT treatment. This is caused by the crystal change with H-type aggregation and enhanced energy transfer from a surface plasmon resonance.     

Importance of poly(ethylene glycol) conformation for the synthesis of silver nanoparticles in aqueous solution

Silver nanoparticles (NPs) were prepared using silver nitrate (AgNO₃) as a precursor in an aqueous solution of poly(ethylene glycol) (PEG), which acted as both a reducing and stabilizing agent. The UV/Vis spectra showed that PEG 100 (100 kg/mol) has a remarkable capability to produce silver NPs at 80 °C, but the production of silver NPs by both PEG 2 (2 kg/mol) and PEG 35 (35 kg/mol) was negligible. This difference was explained by the conformation of PEG in the reaction solution: the entangled conformation for PEG 100 and the single-coiled conformation for PEG 2 and PEG 35, which were confirmed by pulse-field-gradient ¹H NMR and viscosity measurements. In an aqueous solution, the entangled conformation of PEG 100 facilitated the reduction reaction by caging silver ions and effectively prevented the agglomeration of formed NPs. The reaction in an aqueous PEG 100 solution was observed to be stable under the conditions of a prolonged reaction time or an increased temperature, while no reduction reaction occurred in the PEG 2 solution. The synthesis of silver NPs by PEG 100 was well controlled to produce fine silver NPs with 3.68 ± 1.03 nm in diameter, the size of which remained relatively constant throughout the reaction.     

Enhanced infrared to visible upconversion emission in Er3+ doped phosphate glass: Role of silver nanoparticles

Phosphate glasses with compositions (59.5–x)P₂O₅–MgO–xAgCl–0.5Er₂O₃ (0.0≤x≤1.5 mol%) containing fixed concentration of Er³⁺ ion with and without silver nanoparticles (NPs) are prepared using melt quenching technique. The amorphous nature of the glass is confirmed using the X-ray diffraction method. The homogeneous distribution of spherical Ag NPs (average size ～37 nm) in the glassy matrix is evidenced from the transmission electron microscopy (TEM) analyses. The UV–vis–NIR absorption spectra shows 10 bands corresponding to ⁴I_13/2, ⁴I_11/2, ⁴I_9/2, ⁴F_9/2, ⁴S_3/2, ²H_11/2, ⁴F_7/2, ⁴F_5/2, ²G_9/2, ⁴G_11/2 transitions in which the most intense bands are ²H_11/2 and ⁴G_11/2. The absorption spectrum of Er³⁺ ions free glass sample containing Ag NPs displays a prominent surface Plasmon resonance (SPR) band located at 528 nm. The infrared to visible frequency upconversion (UC) emission under 797 nm excitation shows two emission bands green (⁴S_3/2–⁴I_15/2) and red (⁴F_9/2–⁴I_15/2) centered at 540 nm and 634 nm, respectively, corresponding to Er³⁺ transitions. An enhancement in UC emission intensity of green band (⁴S_3/2–⁴I_15/2) is observed in the presence of silver NPs and the maximum enhancement occurred for 1.5 mol% AgCl. However, the enhancement of emission intensity of the red band (⁴F_9/2–⁴I_15/2) is smaller. The enhancement of UC emission is understood in terms of the intensified local field effect due to silver NPs.     

A novel method for synthesis of colloidal silver nanoparticles by arc discharge in liquid

This paper presents a novel, inexpensive and one-step approach for synthesis of silver nanoparticles (Ag NPs) using arc discharge between titanium electrodes in AgNO₃ solution. The resulting nanoparticles were characterized using UV–Vis spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Silver nanoparticles of 18 nm diameter were formed during reduction of AgNO₃ in plasma discharge zone. Optical absorption spectroscopy of as prepared samples at 15 A arc current in AgNO₃ solution shows a surface plasmon resonance around 410 nm. It was found that sodium citrate acts as a stabilizer and surface capping agent of the colloidal nanoparticles. SEM images exhibit the increase of reduced nanoparticles in 6 min arc duration compared with 1 min arc duration. TEM image of the sample prepared at 6 min arc duration shows narrow size distribution with 18 nm mean particle size. Antibacterial activities of silver nanoparticles were investigated at the presence of Escherichia coli (E-coli) bacteria.     

Comparative study of thermal and photo-induced reactions of NO on particulate and flat silver surfaces

Adsorption states, thermal reactions, and photoreactions at photon energies 2.3–4.7 eV of NO dimers and monomers have been compared between 8-nm silver nanoparticles (Ag NPs) formed on an Al₂O₃/NiAl(110) substrate and flat Ag(111) surfaces, by thermal desorption (TPD) and by photodesorption using mass selected time-of flight measurements. On the Ag NPs, the (NO)₂ and NO species are bound more weakly and with broader variation of adsorption states, compared to Ag(111). For (NO)₂ excitation of the Mie plasmon of the Ag NPs with p-polarized 3.5-eV photons enhances the photodesorption cross section (PCS) of NO from (NO)₂ by a factor 15 compared to Ag(111); even off the plasmon resonance up to 3-fold PCS enhancement is obtained which we ascribe to hot electron confinement. However, since translational energy distributions of photodesorbed NO are roughly the same on Ag NPs and on Ag(111), common mechanisms of photoexcitation and photoreactions apply on both types of surfaces, and neither enhancement modifies the photoinduced dynamics. Stronger particle-induced influences are observed for the photoinduced NO monomer by changes in its properties, chemical environments, and formation/decay kinetics.Our results show that NPs can lead to considerable changes of efficiency and, under favorable cases, also of branching of photoinduced surface reactions.     

Enhanced UV-excited luminescence of europium ions in silver/tin-doped glass

Glasses containing silver, tin and europium were prepared by the melt-quenching technique with silver nanoparticles (NPs) being embedded upon heat treatment (HT). An intensification of Eu³⁺ ions emission was observed for non-resonant excitation around 270 nm, corresponding to UV absorption in the material. Optical measurements suggest that light absorption occurs at single Ag⁺ ions and/or twofold-coordinated Sn centers followed by energy transfer to europium which results in populating the ⁵D₀ emitting state in Eu³⁺. After HT at 843 K, a quenching effect is observed on Eu³⁺ luminescence with increasing holding time in the 350–550 nm excitation range. The quenching effect shows with the presence of Ag NPs which may provide multipole radiationless pathways for excitation energy loss in europium ions.     

Plasmon-enhanced luminescence of Sm complex using silver nanoparticles in Polyvinyl Alcohol

Silver (Ag) nanoparticles (NPs) were prepared by laser ablation in water with an aim to enhance the luminescence of rare earth coordinated complex in polymer host. A fixed concentration of the complex containing Samarium (Sm), Salicylic acid (Sal) and 1, 10-phenanthroline (Phen) were combined with different concentrations of silver NPs in PolyVinyl Alcohol at room temperature. Absorption spectrum and XRD patterns of the sample show that the Sm(Sal)₃Phen complex is accompanied by Ag NPs. The luminescence from the complex was recorded in the presence and absence of Ag NPs using two different excitation wavelengths viz. 400 and 355 nm. Of these, 400 nm radiation falls in the surface plasmon resonance of Ag NPs. It was found that the Ag NPs led to a significant enhancement in luminescence of the complex. Surprisingly, a high concentration of Ag NPs tends to quench the luminescence.     

Diamine-linked array of metal (Au,Ag) nanoparticles on glass substrates for reliable surface-enhanced Raman scattering (SERS) measurements

Metal (Au, Ag) nanoparticles (M NPs) (ca. 30–40 nm) prepared by citrate reduction method were arrayed on amine-terminated glass substrates using diamine linkers with different chain lengths. 1,4-diaminobutane (C-4 diamine) produced the uniform and densely-packed array of M NPs on glass substrates at appropriate concentration ranges, whereas diamine linkers with longer chain lengths (C-8 and C-12 diamines) produced more heterogeneous and aggregated array of M NPs. When compared to Ag NPs, Au NPs demonstrated more controllable and higher packing density due to their mono-dispersed size and higher affinity to diamine linkers. Uniformly arrayed M NPs (Au, Ag) on glass substrates exhibited high enhancement factors in SERS measurements of o-chlorothiophenol probes. Au NPs arrayed substrates exhibited an approximate power-law linearity of Raman intensity with probe concentrations (from 10⁻⁷ M to 10⁻⁴ M), demonstrating more reliable SERS substrates than Ag arrayed substrates with higher SERS activity.     

Fabrication and characterization of silver/titanium dioxide composite nanoparticles in ethylene glycol with alkaline solution through sonochemical process

This paper aims to study fabrication and characterization of silver/titanium oxide composite nanoparticle through sonochemical process in the presence of ethylene glycol with alkaline solution. By using ultrasonic irradiation of a mixture of silver nitrate, the dispersed TiO₂ nanoparticle in ethylene glycol associated with aqueous solution of sodium oxide yields Ag/TiO₂ composite nanoparticle with shell/core-type geometry. The powder X-ray diffraction (XRD) of the Ag/TiO₂ composites showed additional diffraction peaks corresponding to the face-centered cubic (fcc) structure of silver crystallization phase, apart from the signals from the cores of TiO₂. Transmission electron microscopy (TEM) images of Ag/TiO₂ composites, which average particle size is roughly 80 nm, reveal that the titanium oxide coated by Ag nanoparticle with a grain size of about 2–5 nm. Additionally, the formation of silver nanoparticles on TiO₂ was monitored by ultraviolet visible light spectrophotometer (UV–Vis). As measured the optical absorption spectra of as-synthesized Ag nanoparticle varying with time, the mechanism of surface formatting silver shell on the cores of TiO₂ could be explored by autocatalytic reaction; the conversion of Ag particle from silver ion is 98% for the reaction time of 1000 s; and the activity energy of synthesizing Ag nanoparticles on TiO₂ is 40 kJ/mol at temperature ranging from 5 to 25 °C. Hopefully, this preliminary investigation could be used for mass production of composite nanoparticles assisted by ultrasonic chemistry in the future.     

Immobilization of silver nanoparticles on silica microspheres

The silver nanoparticles (Ag NPs) have been immobilized onto silica microspheres through the adsorption and subsequent reduction of Ag⁺ ions on the surfaces of the silica microspheres. The neat silica microspheres that acted as the core materials were prepared through sol–gel processing; their surfaces were then functionalized using 3-mercaptopropyltrimethoxysilane (MPTMS). The major aims of this study were to immobilize differently sized Ag particles onto the silica microspheres and to understand the mechanism of formation of the Ag nano-coatings through the self-assembly/adsorption behavior of Ag NPs/Ag⁺ ions on the silica spheres. The obtained Ag NP/silica microsphere conglomerates were characterized by field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and energy-dispersive spectroscopy (EDS). Their electromagnetic wave shielding effectiveness were also tested and studied. The average particle size of the obtained Ag NPs on the silica microsphere was found that could be controllable (from 2.9 to 51.5 nm) by adjusting the ratio of MPTMS/TEOS and the amount of AgNO₃.     

Green synthesis of silver-graphene nanocomposite-based transparent conducting film

In the present work, silver nanoparticles (Ag NPs)/graphene nanocomposite has been synthesized successfully by simple solvothermal method via green route. Citric acid is used as green reducing agent for the reduction of graphene oxide (GO) and Ag ions. Silver nitrate is used as a precursor material for Ag NPs. As synthesized Ag NPs/graphene nanocomposite has been characterized by X-ray diffraction, Raman spectroscopy, Fourier transform infra-red spectroscopy, UV–vis spectroscopy, thermal gravimetric analysis, field emission scanning electron microscopy, and X-ray photoelectron spectroscopy. Experimental results confirm the reduction of GO and the successful formation of Ag NPs decorated graphene nanosheets. In addition, spray coating technique is employed for the fabrication of transparent conducting films. Enhancement in the optoelectrical signatures has been achieved using thermal graphitization of fabricated films. Thermal graphitization at 800 °C for 1 h marks the best performance of fabricated film with sheet resistance of ~3.4 kΩ/□ and transmittance (550 nm) of ~66.40%, respectively.     

In-situ formation of silver nanoparticles stabilized by amphiphilic star-shaped copolymer and their catalytic application

Silver nanoparticles (Ag NPs) were prepared via in situ reduction of silver nitrate (AgNO₃) using polymeric micelles as nanoreactors without any additional reductant. The micelles were constructed from the amphiphilic star-shaped copolymer composed of poly(?-caprolactone) (PCL) segment, 2-(dimethylamino)ethyl methacrylate (DMAEMA or DMA) units and oligo(ethylene glycol)monomethyl ether methacrylate (OEGMA or OEG) units. The Ag NPs stabilized by those star-shaped copolymers were characterized using UV-vis spectrum, DLS, TEM and FTIR. It confirmed that PDMAEMA exhibited the reducing property unless pH was above 7. The Ag NPs were sphere-like with a diameter of 10-20 nm, which was independent of the architecture of the copolymer and AgNO₃ concentration. Furthermore, the catalytic activity of these Ag NPs was investigated by monitoring the reduction of p-nitrophenol (4-NP) by NaBH₄. The result showed that the Ag NPs formed by coordination reduction can be effectively applied in catalytic reaction.     

Preparation of Cu–Ag core–shell particles with their anti-oxidation and antibacterial properties

Cu–Ag core–shell particles were fabricated from Cu particles and silver sulphate with the environmental-friendly TA (tartaric acid, C₄H₆O₆) as reducing and chelating agent in an aqueous system. The influences of [TA]/[Ag] and [Ag]/[Cu] molar ratios on the formation of Ag coatings on the Cu particles were investigated. The SEM images and SEM–EDS analyses showed that [TA]/[Ag] = 0.5 and [Ag]/[Cu] ≥0.2, the Cu particles were coated with uniform Ag nanoparticles. XRD analyses revealed that for these Cu–Ag particles heated at 250 °C, the oxidation of Cu was significantly reduced. Both anti-Staphylococcus aureus (Gram-positive) and anti-Escherichia coli (Gram-negative) characteristics of this Cu–Ag composite particles showed satisfactory antibacterial ability. The characteristics of the composite Cu–Ag particles were discussed in detail.     

Oxygen species on the silver surface oxidized by MW-discharge: Study by photoelectron spectroscopy and DFT model calculations

A polycrystalline silver surface has been studied by synchrotron radiation photoelectron spectroscopy after deep oxidation by microwave discharge in an O₂ atmosphere. Oxidized structures with high oxygen content, AgO_x with x > 1, have been found on the silver surface after oxidation at 300–400 K. The line shapes observed in the O1s spectra were decomposed into five components and indicated that complex oxidized species were formed. An analysis of the oxidized structures with binding energies, Е_b(O1s), greater than 530 eV pointed to the presence of both Ag–O and O–O bonds. We have carried out a detailed experimental study of the valence band spectra in a wide spectral range (up to 35 eV), which has allowed us to register the multicomponent structure of spectra below Ag4d band. These features were assigned to the formation of Ag–O and O–O bonds composed of molecular (associative) oxygen species. DFT model calculations showed that saturation of the defect oxidized silver surface with oxygen leads to the formation of associative oxygen species, such as superoxides, with electrophilic properties and covalent bonding. The high stability of oxygen-rich silver structures, AgO_x, can be explained by the formation of small silver particles during the intensive MW oxidation, which can stabilize such oxygen species.     

A facile strategy to synthesize bimetallic Au/Ag nanocomposite film by layer-by-layer assembly technique

A facile strategy has been developed for the preparation of bimetallic gold–silver (Au–Ag) nanocomposite films by alternating absorption of poly-(ethyleneimine)–silver ions and Au onto substrates and subsequent reduction of the silver ions. The composition, micro-structure and properties of the {PEI–Ag/Au}_n nanocomposite films were characterized by ultraviolet visible spectroscopy (UV–vis), transmisson electron microscopy (TEM), field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), surface enhanced Raman scattering (SERS) and cyclic voltammetry (CV). The UV–vis characteristic absorbances of {PEI–Ag/Au}_n nanocomposite thin film increase almost linear with the number of bilayers, which indicates a process of uniform assembling. Appearance of a double plasmon bands in the visible region and the lack of apparent core–shell structures in the TEM images confirm the formation of bimetallic Au–Ag nanoparticles. The result of XPS also demonstrates the existence of Ag and Au nanoparticles in the nanocomposite films. TEM and FESEM images show that these Ag and Au nanoparticles in the films possess sphere structure with the size of 20–25 nm. The resulting {PEI–Ag/Au}_n films inherit the properties from both the metal Ag and Au, which exhibits a unique performance in SERS and electrocatalytic activities to the oxidation of dopamine. As a result, the {PEI–Ag/Au}_n films are more attractive compared to {PEI–Ag/PSS}_n and {PEI/Au}_n films.     

Electric properties and structure of Agx(As0.33S0.335Se0.335)100−x bulk glasses

In this paper, results of investigation of the bulk glasses with composition of Ag_x(As_0.33S_0.335Se_0.335)_100−x (x=0–28 at%) are revealed. The amorphous structure of samples was confirmed by the X-ray diffraction analysis. The structure was deduced from the Raman spectra measured for all silver contents in As–S–Se matrix. From the point of their electrical properties, all glasses behave as ionic conductors. Their ac conductivity increases with increasing content of silver. As determined from the comparison of ac and dc conductivities, the contribution of electronic conductivity to the overall conductivity is very low and decreases from about 3% for the glass with 12 at% of Ag to about 1% for the glass with 22 at% of Ag.     

Simultaneous synthesis of TiO2 microrods in situ decorated with Ag nanoparticles and their bactericidal efficiency

In this study, we report a simple and cost-effective method for in situ decoration of Ag NPs onto nanoporous TiO₂ microrods by one medium (ethylene glycol) that can produce two different morphologies. In order to investigate the morphology, phase composition, crystalline structure, and chemical state (valency) of samples before and after annealing in air at different temperatures, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) were performed. The present results show that the size, morphology and crystallinity of both Ag NPs and TiO₂ microrod substrate depend on the post-annealing treatment temperatures. The annealed Ag–TiO₂ NP/microrod composites show large inhibition zones against E. coli bacteria. The obtained Ag–TiO₂ composites have the potential for use as a novel antibacterial material and in water treatment applications.     

Silver,gold and the corresponding core shell nanoparticles: synthesis and characterization

Simple strategies for producing silver and gold nanoparticles (AgNP and AuNP) along with the corresponding core shell nanoparticles (Au–Ag and Ag–Au) by reduction of the metal salts AgBF₄ and HAuCl₄ by NaBH₄ in water will be presented. The morphologies of the obtained nanoparticles are determined by the order of addition of reactants. The obtained NPs, with sizes in the range 3–40 nm, are characterized by transmission electronic microscopy (TEM) and UV–Vis absorption spectroscopy, so as to evaluate their qualities. Moreover, a direct electrochemical detection protocol based on a cyclic voltammetry in water solution that involves the use of glassy carbon electrode is also applied to characterize the prepared NPs. The developed NPs and the related electroanalytical method seem to be with interest for future sensing and biosensing applications including DNA sensors and immunosensors.