Synthesis of graphene oxide sheets decorated by silver nanoparticles in organic phase and their catalytic activity

The graphene oxide(GO) sheets decorated by Ag nanoparticles were prepared using a liquid–liquid two-phase method at the room temperature. The synthesized samples existed in the organic phase and were characterized by X-ray diffraction, transmission electron microscopy, UV–vis spectroscopy and Raman spectra. The results demonstrate that these silver-nanoparticles with diameter of about 10 nm assembled on graphene oxide sheets are flexible and can form stable suspensions in organic phase. Raman signals of graphene oxide sheets are increased by the attached silver nanoparticles, displaying higher surface-enhanced Raman scattering activity. Furthermore, Ag/GO are found to serve as effective catalysts to activate the reduction of 4-nitrophenol (4NP) in the presence of NaBH₄.     

Synthesis and characterization of nanocomposites films with graphene oxide and reduced graphene oxide nanosheets

Graphene oxide (GO) and reduced graphene oxide (CRGO), as a graphene derivatives, possess unique properties and a high aspect ratio, indicating great potential in nanocomposite fields. The present work reports the fabrication of the nanocomposite films by a simple and environmentally friendly process using aqueous solution and optimized time sonication for better exfoliation of the graphene sheets within Poly(Vinyl alcohol) (PVA) as matrix. The films were characterized using high-resolution TEM (HRTEM), X-ray diffraction (XRD), Microtensile testing, Differential scanning calorimetry (DSC) and Thermogravimetric analysis (TGA). The TEM images revealed a successfully exfoliation of the GO/CRGO nanosheets. XRD combined with TGA and DSC measurements showed an improvement in the thermal stability and tunable thermal properties. In addition, the Young's modulus and tensile yield strength of the composite films containing 1 wt% GO were obtained to be 4.92 GPa and 66 MPa respectively. These excellent reinforcement effects were achieved by the strong interaction between the components.     

The growth of Ag films on a TiO2(110)-(1×1) surface

We report here the growth of Ag film and its thermal stability on the TiO₂(1 1 0)-(1×1) surface using combination techniques of low-energy ion scattering (LEIS), X-ray photoelectron spectroscopy (XPS), and low-energy electron diffraction (LEED). At a surface temperature as low as 125 K, a 2D growth of Ag films seems to occur for submonolayer coverages up to ∼0.8 ML. Annealing of low temperature grown Ag films to 500 K for coverage of 1–2.4 ML would result in the formation of metastable Ag layers with rest of Ag forming 3D needle-like islands on top of this Ag film.     

Ultrasound-assisted surface treatment of ZrO2 with BSA and incorporating in PVC to improve the properties of the obtained nanocomposites: Fabrication and characterization

This paper describes the preparation of poly(vinyl chloride) (PVC) nanocomposites (NCs) reinforced with modified zirconia (ZrO₂) nanoparticles (NPs). The ZrO₂ NPs were defined as efficient filler for PVC NCs. For achieving the best dispersion and improvement of properties, the surface of ZrO₂ NPs was modified by Bovine Serum Albumin (BSA). Carboxylic acids and amines are important functional groups of BSA which handle the grafting BSA on the surface of ZrO₂ NPs. The PVC/ZrO₂-BSA NCs were fabricated by incorporation of various amounts of the ZrO₂-BSA NPs (3, 6 and 9 wt%) into PVC matrix. All the above processes were accomplished by ultrasonication as a green and environmentally-friendly method. Also, the magnetic and mechanical stirrer was used for the preparation of samples but the results are not suitable and the aggregation was observed which indicated the use of ultrasonic irradiation is the best method for the preparation of NC. The products were characterized by Fourier transform infrared spectroscopy, Transmission electron microscopy, Field emission scanning electron microscopy, X-ray diffraction, Thermogravimetric analysis, Ultraviolet–visible spectroscopy, photoluminescence spectroscopy, energy dispersive X-ray spectroscopy, wettability, and mechanical tests. The achieved PVC/ZrO₂-BSA NCs showed high thermal stability, good mechanical, optical and wettability properties compared to the pure PVC. In addition, among the obtained NCs, the PVC/ZrO₂-BSA NC 6 wt% showed the best improvement.     

Structure,dielectric and optical properties of p-type (PVA/CuI) nanocomposite polymer electrolyte for photovoltaic cells

A novel PVA/CuI nanocomposite polymer electrolyte layer synthesized via the reduction of CuCl₂ by NaI in an aqueous PVA solution. The as-prepared films were characterized by X-ray diffraction, scanning electron microscope, as well as impedance spectroscopy. The obtained results indicated the formation of hexagonal CuI nano particles of ≈55 nm sizes embedded in the PVA matrix. In addition, the study of dielectric parameters and conductivity of PVA/CuI nanocomposite in wide range of temperature and frequency are given and discussed. The frequency dependence of ac-conductivity suggests power law with an exponent 0.026 < s < 0.73 which predicts hopping of charge carriers. The bulk conductivity showed activation with temperature, significant values of activation energy are deduced and discussed. An average value of the energy gap width, 2.05 eV obtained using optical absorption in UV–visible spectra for PVA/CuI nanocomposite polymer electrolyte.     

Ionic self-assembled porphyrin-graphene composite for enhanced photocurrent response and electrochemical property

We have synthesized cationic mesa-tetra(4-pyridyl) porphine (TPyP)-reduced graphene oxide (RGO) hybrid structures through chemical reduction and subsequent ionic self-assembly. UV–vis spectroscopy, fluorescence emission spectroscopy and scanning and transmission electron microscopies are used to analyze the structures, which indicate that TPyP covalent bonds present between the double surface of RGO sheets. A reversible on/off photo-current density of 45.89 A/cm² has been observed when the as-formed TPyP/RGO nanocomposite is placed in the environment of pulsed white-light illumination. In addition, an ultrasensitive electrochemical aptasensor could be fabricated by the as-prepared TPyP/RGO to detect thrombin. A linear response to thrombin has been observed with the as-formed electrochemical aptasensor in the concentration range of 1–1200 nM. Besides, the limitation of detection is determined to be 0.3 nM.     

Structural and magnetic properties of reduced graphene oxide-TiO2 nanoflower composite

We have focused on the structural and magnetic properties of hazardous acid free synthesis of anatase titanium dioxide (TiO₂) phase nanoflower and reduced graphene oxide-TiO₂ (rGO-TiO₂) nanocomposite using hydrothermal process. Because, strong acids free synthesis is environmental friendly and reduce overall cost of synthesized samples. In the synthesis of rGO-TiO₂, synthesized TiO₂ nanoflower and graphene oxide (GO) were used as reagents. The resulting materials have analyzed using different techniques such as, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and Fourier Transformation Infrared spectrophotometer for confirmation of flower like morphology, crystalline phase and chemical composition. Moreover, VSM analysis has revealed the ferromagnetism induced in the rGO-TiO₂ composite at room temperature. The values of saturation magnetization were found to be 0.002 and ~ 0.243±0.04 emu/g for TiO₂ nanoflower and rGO-TiO₂ nanocomposite, respectively. In comparison of pure TiO₂, rGO-TiO₂ exhibited larger magnetization at room temperature. This is because presences of various edge and site defects such as topological and point defects like vacancies, which create localized unpaired spins in reduced graphene oxide (rGO), induce the ferromagnetism behavior in rGO-TiO₂ nanocomposite.     

High c-axis preferred orientation ZnO thin films prepared by oxidation of metallic zinc

Thin films of zinc oxide were grown on glass substrates by thermal oxidation. The metallic zinc films were thermally oxidized at different temperatures ranging from 300 to 600 °C to yield ZnO thin films. The structural property of the thin films was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The X-ray diffraction measurements showed that the films oxidized at 300 °C were not oxidized entirely, and the films deposited at 600 °C had better crystalline quality than the rest. When the oxidation temperature increased above 400 °C, the films exhibited preferred orientation along (002) and high transmittance ranging from 85% to 98% in vis–near-infrared band. Meanwhile, the films showed a UV emission at about 377 nm and green emission. With the increasing of oxidation temperature, the intensity of green emission peak was enhanced, and then decreased, disappearing at 600 °C, and the case of UV emission increased. Furthermore, a strong green emission was observed in the film sintered in pure oxygen atmosphere.     

High surface area monodispersed Fe3O4 nanoparticles alone and on physical exfoliated graphite for improved supercapacitors

Highly conductive, unsophisticated and easy to be obtained physical exfoliated graphite (PHG) supporting well dispersed magnetite, Fe₃O₄/PHG nanocomposite, has been prepared by a one-step chemical strategy and physico-chemical characterized. The nanocomposite, favoured by the a-polar nanoparticles (NPs) capping, results in a self-assembled monolayer of monodispersed Fe₃O₄, covering perfectly the hydrophobic surfaces of PHG. The nanocomposite as an electrode material was fabricated into a supercapacitor and characterized by cyclic voltammetry (CV) and galvanostatic charge–discharge measurements. It shows, after a suitable annealing, significant electrochemical properties (capacitance value of 787 F/g at 0.5 A g⁻¹ and a Fe₃O₄/PHG weight ratio of 0.31) and good cycling stability (retention 91% after 30,000 cycles). Highly monodispersed very fine Fe₃O₄ NPs, covered by organic chains, have been also synthesized. The high surface area Fe₃O₄ NPs, after washing to leave a low content of organic chains able to avoid aggregation without excessively affecting the electrical properties of the material, exhibit remarkable pseudocapacitive activities, including the highest specific capacitance over reported for Fe₃O₄ (300 F/g at 0.5 A g⁻¹).     

Synthesis and characterization of graphenated carbon nanotubes on IONPs using acetylene by chemical vapor deposition method

The graphenated carbon nanotubes (G-CNTs) were synthesized on monodisperse spherical iron oxide nanoparticles (IONPs) using acetylene as carbon precursor by simple chemical vapor deposition method. The reaction parameters such as temperature and flow of carbon source were optimized in order to achieve G-CNTs with excellent quality and quantity. Transmission electron microscopy (TEM) clearly illustrated that the graphene flakes are forming along the whole length on CNTs. The degree of graphitization was revealed by X-ray diffraction (XRD) analysis and Raman spectroscopic techniques. The intensity of D to G value was less than one which confirms the obtained G-CNTs have high degree of graphitization. The optimum reaction temperature for the IONPs to form metallic clusters which in turn lead to the formation of G-CNTs with high carbon deposition yield is at 900 °C. The TEM shows the CNTs diameter is 50 nm with foiled graphene flakes of diameter around 70 nm. Our results advocate for IONPs as a promising catalytic template for quantitative and qualitative productivity of nanohybrid G-CNTs. The produced G-CNTs with high degree of graphitization might be an ideal candidate for nanoelectronic application like super capacitors and so on.     

Carbon nanofibers and multiwalled carbon nanotubes from camphor and their field electron emission

Vertically aligned carbon nanofibers (CNF) and multiwalled carbon nanotubes (MWCN) have been synthesized from camphor by catalytic thermal CVD method on Co and Co/Fe thin films (for CNF) and on silicon substrates using a mixture of camphor and ferrocene (for MWCN). CNF and MWCN are studied by field emission scanning electron microscopy, high-resolution transmission electron microscopy, visible Raman spectroscopy, X-ray diffraction in order to get insight into the microstructure and morphology of these materials. Field electron emission study indicates turn-on field of about 2.56, 3.0 and 6.5 V/μm for MWCN, Co/CNF and Co/Fe/CNF films, respectively. The best performance of MWCN in field electron emission among the materials studied can be due to the highest aspect ratio, good graphitization and good density.     

Electrochemical properties of spinel-type manganese oxide/porous carbon nanocomposite powders in 1 M KOH aqueous solution

Spinel-type manganese oxide/porous carbon (Mn₃O₄/C) nanocomposite powders have been simply prepared by a thermal decomposition of manganese gluconate dihydrate under an Ar gas flow at above 600 °C. The structure and texture of the Mn₃O₄/C nanocomposite powders are investigated by X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS) equipped scanning transmission electron microscopy (STEM), transmission electron microscopy (TEM), selected area-electron diffraction (SA-ED), thermogravimetric and differential thermal analysis (TG-DTA) and adsorption/desorption of N₂ gas at ?196 °C. The electrochemical properties of the nanocomposite powders in 1 M KOH aqueous solution are studied, focusing on the relationship between their structures and electrochemical capacitance.In the nanocomposite powders, Mn₃O₄ nano particles approximately 5 nm in size are dispersed in a porous carbon matrix. The nanocomposite powders prepared at 800 °C exhibit a high specific capacitance calculated from cyclic voltammogram of 350 and 600 F g^?1 at a sweep rate of 1 and 0.1 mV s^?1, respectively. The influence of the heating temperature on the structure and the electrochemical properties of nanocomposite powders is also discussed.     

Plasmon enhanced CdS-quantum dot sensitized solar cell using ZnO nanorods array deposited with Ag nanoparticles as photoanode

CdS-quantum dot sensitized solar cell using ZnO nanorods (ZnO NRs) array deposited with Ag nanoparticles (Ag NPs) as photoanode was fabricated. Light absorption effect of Ag NPs on improvement of the cell performance was investigated. Performance improvement of metal nanoparticles (MNPs) was controlled by the structure design and architecture. Different decorations and densities of Ag NPs were utilized on the photoanode. Results showed that using 5% Ag NPs in the photoanode results in the increased efficiency, fill factor, and circuit current density from 0.28% to 0.60%, 0.22 to 0.29, and 2.18 mA/cm² to 3.25 mA/cm², respectively. Also, incident photon-to-current efficiencies (IPCE) results showed that cell performance improvement is related to enhanced absorption in the photoanode, which is because of the surface plasmonic resonance and light scattering of Ag NPs in the photoanode. Measurements of electrochemical impedance spectroscopy revealed that hole transfer kinetics increases with introduction of Ag NPs into photoanode. Also, it is shown that chemical capacitance increases with introduction of Ag NPs. Such increase can be attributed to the surface palsmonic resonance of Ag NPs which leads to absorption of more light in the photoanode and generation of more photoelectron in the photoanode.     

Fe3O4/hydroxyapatite/graphene quantum dots as a novel nano-sorbent for preconcentration of copper residue in Thai food ingredients: Optimization of ultrasound-assisted magnetic solid phase extraction

Fe₃O₄/hydroxyapatite/graphene quantum dots (Fe₃O₄/HAP/GQDs) nanocomposite was synthesized and used as a novel magnetic adsorbent. This nanocomposite was characterized using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, and magnetization property. The Fe₃O₄/HAP/GQDs was applied to pre-concentrate copper residues in Thai food ingredients (so-called “Tom Yum Kung”) prior to determination by inductively coupled plasma-atomic emission spectrometry. Based on ultrasound-assisted extraction optimization, various parameters affecting the magnetic solid-phase extraction, such as solution pH, amount of magnetic nanoparticles, adsorption and desorption time, and type of elution solvent and its concentration were evaluated. Under optimal conditions, the linear range was 0.05–1500 ng mL⁻¹ (R² > 0.999), limit of detection was 0.58 ng mL⁻¹, and limit of quantification was 1.94 ng mL⁻¹. The precision, expressed as the relative standard deviation of the calibration curve slope (n = 5), for intra-day and inter-day analyses was 0.87% and 4.47%, respectively. The recovery study of Cu for real samples was ranged between 83.5% and 104.8%. This approach gave the enrichment factor of 39.2, which guarantees trace analysis of Cu residues. Therefore, Fe₃O₄/HAP/GQDs can be a potential and suitable candidate for the pre-concentration and separation of Cu from food samples. It can easily be reused after treatment with deionized water.     

Single crystalline graphene synthesized by thermal annealing of humic acid over copper foils

Production of graphene by thermal annealing on copper foil substrates has been studied with different sources of carbon. The three carbon sources include humic acid derived from leonardite, graphenol, and activated charcoal. Hexagonal single crystalline graphene has been synthesized over the copper foil substrates by thermal annealing of humic acid, derived from leonardite, in argon and hydrogen atmosphere (Ar/H₂=20). The annealing temperature was varied between 1050 °C and 1100 °C at atmospheric pressure. Samples have been investigated using scanning electron microscope (SEM) and Raman spectroscopy. At lower temperatures the thermal annealing of the three carbon sources used in this study produces pristine graphene nanosheets which cover almost the whole substrate. However when the annealing temperature has been increased up to 1100 °C, hexagonal single crystalline graphene have been observed only in the case of the humic acid. Raman analysis showed the existence of 2D band around 2690 cm⁻¹.     

H adsorption at Ag/Si interfaces in epitaxially grown Ag(1 1 1) films on Si(1 1 1)7 × 7 substrates

The interaction of atomic H with Ag(1 1 1)/Si(1 1 1)7 × 7 surfaces was studied by thermal desorption (TD) spectroscopy and scanning tunneling microscopy (STM) at room temperature. TD spectroscopy revealed an intense peak from mono H–Si bonds, even though the Si surface was covered by the Ag atoms. This peak was not observed from Ag-coated SiO₂/Si substrates. STM observation showed no clear change of the Ag surface morphology resulting from H exposure. All these results indicate that the atomic H adsorbs at neither the Ag surfaces nor Ag bulk sites, but at the Ag/Si interface by diffusing through the Ag film.     

Investigation of reduced graphene oxide effects on ultra-violet detection of ZnO thin film

The reduced graphene oxide (rGO) incorporated ZnO thin films were fabricated by dip-coating method. The Raman and FT-IR spectra of 0.075 wt% incorporated composite film showed reduction of GO in composite film. The transmittanceProd. Type: FTP spectra have shown that rGO incorporation increase the visible light absorption of ZnO thin film while the calculated band gaps of samples were decreased from 3.28 to 3.25 eV by increasing the rGO content. The linear trend of I–V curve suggests an ohmic contact between ZnO and rGO. Besides, it was found that by increasing the rGO content, the electrical resistivity was decreased from 4.32×10² Ω cm for pure ZnO film to 2.4×10¹ Ω cm for 0.225 wt% rGO incorporated composite film. The composite photodetectors not only possessed a desirable UV photosensitivity, but also the response time of optimum sample containing 0.075 wt% rGO was reduced to about one-half of pure ZnO thin film. Also, the calculated signal to noise (SNR) showed that highly conductive rGO in composite thin films facilitate the carrier transportation by removing the trapping centers. The mechanism of photoresponsivity improvement of composite thin films was proposed by carrier transportation process.     

Cobalt terephthalate MOF-templated synthesis of porous nano-crystalline Co3O4 by the new indirect solid state thermolysis as cathode material of asymmetric supercapacitor

In this work, two different types of Co₃O₄ nano-crystals were synthesized by (i) conventional direct solid state thermolysis of cobalt terephthalate metal-organic framework (MOF-71) and (ii) new indirect solid state thermolysis of Co(OH)₂ derived by alkaline aqueous treatment of MOF-71. The products were then characterized by X-ray diffraction technique (XRD), Fourier transforms infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Reflection electron energy loss spectroscopy (REELS), Brunauer, Emmett, and Teller (BET), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) techniques. By REELS analysis the energy band gap of MOF-71 was determined to be 3.7 eV. Further, electrochemical performance of each Co₃O₄ nanostructure was studied by the cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS) in a three-electrode system in KOH electrolyte. An asymmetric supercapacitor was fabricated using indirect Co₃O₄ nanoparticles as cathode and electrochemically reduced graphene oxide as anode, and the electrochemical properties were studied and showed a high energy density of 13.51 Wh kg⁻¹ along with a power density of 9775 W kg⁻¹ and good cycling stability with capacitance retention rate of 85% after 2000 cycles.     

Preparation and characterization of semiconductor GNR-CNT nanocomposite and its application in FET

So far, little is known about the experimental potential of graphene nanoribbon-carbon nanotube (GNR-CNT) heterostructure as a semiconductor nanocomposite. The present work examined the structural features, topography and electronic properties of GNR-CNT nanocomposite by using Raman spectroscopy, transmission electron microscopy, scanning tunneling microscopy and spectroscopy (STS). The homogenous semiconductor GNR-CNT nanocomposites were produced under optimized synthesis conditions. The narrow band gap was exhibited by optimization of the reduction step. The STS of the micro-scale surface of the nanocomposite shows local density of state in selected areas that represent the 0.08 eV band gap of a homogenous nanocomposite. The potential of the semiconductor nanocomposite was considered for application in stacked graphene nanoribbon-field effect transistors (SGNR-FETs). A simple method of device fabrication is proposed based on a semiconductor stacked GNR nanocomposite. The high hole mobility and rectifying effect of the p–n junction of the SGNR nanocomposite on TiO₂ are demonstrated. The optimal thickness for the back gate TiO₂ dielectric for the tested devices was 40 nm. This thickness decreased leakage current at the p–n junction of the SGNR/TiO₂ interface, which is promising heterojunction for optoelectronics. The thickness of gate dielectric and quantum capacitance of the gate was investigated at the low 40 nm thickness by calculating the mobility. In the proposed SGNR-FET, holes dominate electrical transport with a high mobility of about 1030 cm²/V s.     

Photocatalytic degradation of phenol over novel rod shaped Graphene@BiPO4 nanocomposite

Graphene@BiPO₄ nanocomposite with unique rod shape morphology of BiPO₄ has been successfully fabricated by the simple microwave assisted hydrothermal method. The crucial role of graphene oxide in the growth of rod shaped BiPO₄ crystals has been attempted to explain in this article. Graphene oxide acts as a structure-directing and morphology-controlling agent in the nucleation and growth of nanocrystals. The as prepared organic–inorganic hybrid Graphene@BiPO₄ nanocomposite photocatalyst was characterized by various techniques i.e. X-ray diffraction, scanning electron microscopy, UV–vis diffuse reflectance spectroscopy, Raman spectroscopy and photoluminescence (PL) spectroscopy. The results were promising and shown enhanced photocatalytic activity than pure BiPO₄ for phenol degradation. The effect of graphene loading on the rates of photocatalytic degradation of phenol in solution is investigated. The result shows that the optimum photocatalytic activity of Graphene@BiPO₄ composite at 5 wt% of graphene under visible light is almost three times higher than pure BiPO₄.