Iron phthalocyanine oligomer/Fe3O4 hybrid microspheres and their microwave absorption property

The novel nano-scale iron phthalocyanine oligomer/Fe₃O₄ (FePc/Fe₃O₄) hybrid microspheres were synthesized from iron phthalocyanine oligomer and FeCl₃·6H₂O via a solvent-thermal crystallization route. The morphology and structure of the hybrid microspheres were characterized by Fourier transform infrared spectrophotometer, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. These results showed that the hybrids were monodisperse microspheres and the morphology can be adjusted by controlling pre-polymerization time. The saturation magnetization increased with increase in the pre-polymerization time, while the coercivities decreased. The FePc/Fe₃O₄ hybrid microspheres exhibited novel microwave electromagnetic properties: the dielectric loss was enhanced when the pre-polymerization time increased and a new microwave loss peak appeared at high frequency. The microwave absorbing properties enhanced with increase in the pre-polymerization time and a maximum reflection loss of −29.7 dB was obtained at 11.7 GHz with 6 h of pre-polymerization time when the matching thickness was 3.0 mm. The novel hybrid materials are believed to have potential applications as microwave absorbing materials.     

One-step preparation of organometal/Fe3O4 hybrid microspheres and their electromagnetic properties

Novel organometal/Fe₃O₄ hybrid microspheres were prepared from bisphthalonitrile-benzoxine resin containing ferrocene (FPNBZ) and FeCl₃·6H₂O via a one-step solvent-thermal method. The phase structure, composition and morphology of as-prepared hybrid microspheres were characterized by X-ray powder diffraction, Fourier transform infrared spectrophotometer and scanning electron microscopy. The results revealed that crystallinity, dispersity and size of hybrid microspheres can be controlled by altering the reaction parameters. Density measurement showed that the density is decreased with increasing FPNBZ concentration in the hybrid materials. Electromagnetic properties of the FPNBZ/Fe₃O₄ hybrid microspheres were measured at 2-18 GHz. The electromagnetic measurement indicated that the resonance peaks of complex permittivity, complex permeability, dielectric loss and magnetic loss were shifted to the high frequencies, with the increasing amount of FPNBZ. The as-prepared hybrid materials are believed to have broad applications both in microwave absorption materials in a wide frequency range and in biomedical fields.     

Only Ku-band microwave absorption by Fe3O4/ferrocenyl-CuPc hybrid nanospheres

A novel kind of hybrid nanospheres made of Fe₃O₄ and ferrocenyl-CuPc (FCP) was prepared via effective solvothermal method and performed microwave absorptivity only in Ku-band with minimum reflection loss of −25 dB at 16.0 GHz corresponding to absorbing about 99.7% content of microwave. Scanning electron microscopy images indicated that the nanospheres with uniform particle size distribution have the average diameter of 135 nm. Due to the synergistic reaction between magnetic ferrocenyl-CuPc and Fe₃O₄, the hybrid nanospheres showed novel electromagnetic properties. The real part of complex permittivity of hybrid nanospheres remains stable in the range of 0.5–12.0 GHz and has a large fluctuation at 16.5 GHz. Moreover, the dielectric loss of hybrid nanospheres also appeared a sharp peak at 16.3 GHz with the value of 2.7. The specific gravity of hybrid nanospheres is about 2.08. On the basis of these results, the novel hybrids are believed to have potential applications in the microwave absorbing area in Ku-band.     

A novel carbon nanotubes/Fe3O4 inorganic hybrid material: Synthesis, characterization and microwave electromagnetic properties

Magnetite particles with nanoscale sizes were self-assembled along multiwalled carbon nanotubes through a simple, effective and reproducible solvothermal method. The morphology, composition and phase structure of as-prepared hybrid materials were characterized by scanning electron microscopy, X-ray diffraction and transmission electron microscopy. The results showed that denseness, size and crystallinity of magnetite can be altered by controlling the reaction parameters. Magnetization measurement indicated that both coercivity and saturation magnetization increased linearly with increasing magnetite concentration in the hybrid materials. Electromagnetic properties of the carbon nanotubes/magnetite inorganic hybrid materials were measured at 1∼18 GHz. The magnetic loss was caused mainly by ferromagnetic natural resonance, which is in agreement with the Kittel equation. The as-prepared inorganic hybrid materials are believed to have potential applications in the microwave absorbing area.     

Electromagnetic and microwave absorption properties of carbonyl iron/La0.6Sr0.4MnO3 composites

In this work carbonyl iron/La_0.6Sr_0.4MnO₃ composites were prepared to develop super-thin microwave absorbing materials. The complex permittivity, permeability and microwave absorption properties are investigated in the frequency range of 8-12 GHz. An optimal reflection loss of −12.4 dB is reached at 10.5 GHz with a matching thickness of 0.8 mm. The thickness of carbonyl iron/La_0.6Sr_0.4MnO₃ absorber is thinner, compared with conventional carbonyl iron powders with the same absorption properties. The bandwidth with a reflection loss exceeding −7.4 dB is obtained in the whole measured frequency range with the thickness of 0.8 mm. The excellent microwave absorption properties are attributed to a better electromagnetic matching established by the combination of the enhanced dielectric loss and nearly invariable magnetic loss with the addition of La_0.6Sr_0.4MnO₃ nanoparticles in the composites. Our work indicates that carbonyl iron/La_0.6Sr_0.4MnO₃ composites may have an important application in wide-band and super-thin electromagnetic absorbers in the frequency range of 8−12 GHz.     

Microwave absorption properties of Sr2FeMoO6 nanoparticles

The microwave absorption properties of nanosized double perovskite Sr₂FeMoO₆ and epoxy resin composites were investigated in the frequency range of 2-18 GHz using the coaxial method. The Sr₂FeMoO₆ composites with an optimal 20 wt% epoxy resin showed a strong electromagnetic attenuation of −49.3 dB at 8.58 GHz with a matching thickness of 2.15 mm. Moreover the optimum absorption frequency at which the reflection loss is less than −20 dB, which corresponds to 99% reflection loss of the incident microwave, is from 5.7 to 13.2 GHz with the matching thickness ranging from 3.0 to 1.5 mm. The excellent microwave-absorption properties are a consequence of a proper electromagnetic match due to the existence of the insulating matrix of anti-site defects and anti-phase domains, which not only contribute to the dielectric loss but also to the reduced eddy current loss.     

Synthesis of Co-Cu-Zn doped Fe3O4 nanoparticles with tunable morphology and magnetic properties

Co-Cu-Zn doped Fe₃O₄ nanoparticles can be successfully synthesized using a simple method. The particles in the size range 20−400 nm with different regular shapes i.e. sphere-like, regular hexane and tetrahedron are controllably achieved by changing the metal ion concentration. Compared to pure Fe₃O₄ without dopants, Co-Cu-Zn doped Fe₃O₄ nanoparticles exhibit better microwave absorbing properties at 2−18 GHz. Among three Co-Cu-Zn doped Fe₃O₄ nanoparticles with different morphologies, tetrahedral Co-Cu-Zn doped Fe₃O₄ nanoparticles represent a better dielectric loss in high frequency range. This work is believed the first known report of Co-Cu-Zn doped Fe₃O₄ nanoparticles with tunable morphology and magnetic properties through the hydrothermal process without using any organic solvents, organic metal salts or surfactants.     

Electromagnetic and microwave absorption properties of Fe3O4 magnetic films plated on hollow glass spheres

Magnetic hollow spheres of low density were prepared by plating Fe₃O₄ magnetic films on hollow glass spheres using ferrite plating. The complex permeability and permittivity of spheres–wax composites were measured in the range of 2–18 GHz. The complex permeability and permittivity increased, and the dielectric and magnetic losses were improved as the volume fraction of the magnetic spheres in the composites increased from 60% to 80%, which also resulted in a great improvement of microwave absorption properties. For composites with volume fraction 80%, its magnetic resonance frequency was at about 13 GHz and it appeared three loss peaks in the calculated reflection loss curves; the bandwidth less than −10 dB was almost 4 GHz which was just in the Ku-band frequencies (12–18 GHz) and a minimum reflection loss of −20 dB was obtained when the thickness was 2.6 mm; the microwave absorbing properties were mainly due to the magnetic loss. The results showed that the magnetic spheres composites were good and light microwave absorbers in the Ku-band frequencies.     

Magnetic and microwave absorption properties of BaFe12−x (Mn0.5Cu0.5Zr)x/2O19 synthesized by sol–gel processing

BaFe_12−x (Mn_0.5Cu_0.5Zr)_x/2O₁₉ hexaferrites with x=1, 2 and 3 were prepared by sol–gel process. The ferrite powders possess hexagonal shape and are well separated from one another. The powders of these ferrites were mixed with polyvinylchloride (PVC) plasticizer to be converted into a microwave absorbing composite ferrite with a thickness of 1.8 mm. X-ray diffractometer (XRD), scanning electron microscope (SEM), ac susceptometer, vibrating sample magnetometer and vector network analyzer were used to analyze its structure, electromagnetic and microwave absorption properties. The results showed that magnetoplumbite structures for all samples were formed. The sample with higher magnetic susceptibility and coercivity exhibits a larger microwave absorbing ability. Also the present investigation demonstrates that a microwave absorber using BaFe_12−x(Mn_0.5Cu_0.5Zr)_x/2O₁₉ (x=2 and 3)/PVC with a matching thickness of 1.8 mm can be fabricated for applications over 15 GHz, with reflection loss more than −25 dB for specific frequencies, by controlling the molar ratio of the substituted ions.     

The microwave absorption properties of La0.8Sr0.2Mn1−yFeyO3 nanocrystalline powders in the frequency range 2-18 GHz

La_1−xSr_xMn_1−yFe_yO₃ nanocrystalline powders were prepared by the sol-gel method as a microwave absorption material. The reflectance, the dielectric loss tan δ_e and the magnetic loss tan δ_m of the samples were calculated according to the data of electromagnetism parameters measured by a microwave vector network analyzer in the frequency range 2-18 GHz. The dielectric loss tan δ_e and the magnetic loss tan δ_m had a step-change at a certain frequency so that the superiority of dielectric loss change into the superiority of magnetic loss, which indicated that anti-ferromagnetic clusters in the material change into ferromagnetic clusters by absorbing quantum of microwave electromagnetic field when the frequency of incident microwave reaches a certain value. The effective absorption bandwidth higher than 10 dB reached 6.2 GHz. As a result, the La_0.8Sr_0.2Mn_1−yFe_yO₃ has shown useful applications as a microwave absorption material.     

Low-temperature sintering and microwave dielectric properties of Ca2Zn4Ti15O36 ceramics

The sintering behavior, microstructures, and microwave dielectric properties of Ca₂Zn₄Ti₁₅O₃₆ ceramics with B₂O₃ addition were investigated. The crystalline phases and microstructures of Ca₂Zn₄Ti₁₅O₃₆ ceramics with 0-10 wt% B₂O₃ addition were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The sintering temperature of Ca₂Zn₄Ti₁₅O₃₆ ceramic was lowered from 1170 to 930 °C by 10 wt% B₂O₃ addition. Ca₂Zn₄Ti₁₅O₃₆ ceramics with 8 wt% B₂O₃ addition sintered at 990 °C for 2 h exhibited good microwave dielectric properties, i.e., a quality factor (Qf) 11,400 GHz, a relative dielectric constant (ε_r) 41.5, and a temperature coefficient of resonant frequency (τ_f) 94.4 ppm/°C.     

Synthesis of fine-crystalline Ba0.6Sr0.4TiO3-MgO ceramics by novel hybrid processing route

We report the use of a novel powder-in-sol precursor hybrid processing route to synthesize dense, homogeneous, and fine-crystalline Ba_0.6Sr_0.4TiO₃-MgO (BST-MgO) ceramics as well as the study of the sintering behavior, microstructures, and dielectric properties of the ceramics. Nanosized BST powders are dispersed into BST sol-gel precursor and uniformly distributed BST slurry is obtained after ball-milling mixing. Mg(NO₃)·6H₂O solution is added to the BST slurry to give homogeneous BST-MgO slurry upon ball-milling mixing. The BST-MgO slurry is dried and calcined prior to pressing and sintering at low temperatures of 1200-1300 °C to form the ceramics. The ceramics possess very low dielectric loss tangent below 0.005 for frequency above 1 kHz and for temperature in the range −190-80 °C. The dielectric constant and dielectric tunability increase, while the ferroelectric transition broadening decreases, with increasing average grain size.     

Preparation and dual microwave-absorption properties of carboxylic poly(arylene ether nitrile)/Fe3O4 hybrid microspheres

The carboxylic poly(arylene ether nitrile)/Fe₃O₄ hybrid microspheres were prepared via solvothermal method. The carboxylic poly(arylene ether nitrile) (PEN-COOH) was introduced into the Fe₃O₄ microspheres by chemisorption with mass content up to 15% as defined by infrared spectra and thermal gravimetric analysis. The hybrid sphere is of hierarchical polymer-inorganic microstructure as observed by transmission electron microscopy. The microwave-absorption of the sample owns a shifting peak and a special immobilized peak with the variation of absorber thickness from 3 to 5 mm. Maximum microwave-absorption of the product is capable of over −30 dB in the range of 10-12 GHz. By proposed equivalent filter circuit model, the immobilized peak was attributed to the ordered nanostructure where the Fe₃O₄ nanocrystals were isolated by PEN-COOH. The product has the potential to be applied as microwave absorber with high microwave-absorption, good dispersibility and robust polymer-inorganic interfacial adherence.     

Preparation and microwave absorption properties of loose nanoscale Fe3O4 spheres

Magnetite nanoparticles are found to assemble into randomly dispersed loose nanoscale spheres with diameters ∼300 nm in ethylene glycol in the presence of polyethylene and a small quantity of polyethyleneimine. Modern analysis methods are employed to provide structure information of the magnetic loose spheres. The ferromagnetic saturation magnetization is ∼80.0 emu g⁻¹, and the coercive force is 209 Oe. The microwave electromagnetic parameters are measured by a vector network analyzer. The synthesized loose spheres exhibit novel microwave properties compared with the conventional Fe₃O₄ nanoparticles. An additional microwave loss peak appears in the Ku band, which is attributed to the loose structure.     

Magnetic and rheological properties of monodisperse Fe3O4 nanoparticle/organic hybrid

Fe₃O₄ nanoparticle/organic hybrids were synthesized via hydrolysis using iron (III) acetylacetonate at ∼80 °C. The synthesis of Fe₃O₄ was confirmed by X-ray diffraction, selected-area diffraction, and X-ray photoelectron spectroscopy. Fe₃O₄ nanoparticles in the organic matrix had diameters ranging from 7 to 13 nm depending on the conditions of hydrolysis. The saturation magnetization of the hybrid increased with an increase in the particle size. When the hybrid contained Fe₃O₄ particles with a size of less than 10 nm, it exhibited superparamagnetic behavior. The blocking temperature of the hybrid containing Fe₃O₄ particles with a size of 7.3 nm was 200 K, and it increased to 310 K as the particle size increased to 9.1 nm. A hybrid containing Fe₃O₄ particles of size greater than 10 nm was ferrimagnetic, and underwent Verwey transition at 130 K. Under a magnetic field, a suspension of the hybrid in silicone oil revealed the magnetorheological effect. The yield stress of the fluid was dependent on the saturation magnetization of Fe₃O₄ nanoparticles in the hybrid, the strength of the magnetic field, and the amount of the hybrid.     

Microwave absorption properties of composite powders with low density

The composites of barium ferrite coated on hollow ceramic microspheres were prepared using sol-gel technique. The crystal structure, morphology and microwave absorption properties of composite powders with different weight ratio of microspheres were studied with XRD, EDS, FESEM and vector network analyzer. The results show that the microwave absorption properties of composite powders are greatly improved. The maximum microwave loss of composite powders reaches 31 dB with an amount of 50 wt.% microspheres, and its density is only about 1.80 g/cm³. The effect of hollow ceramic microspheres on the microwave absorption property is also discussed.     

Synthesis, infrared and microwave absorbing properties of (BaFe12O19+BaTiO3)/polyaniline composite

The (BaFe₁₂O₁₉+BaTiO₃)/polyaniline composite was synthesized by in situ polymerization and introduced into epoxy resin and polyethylene to be a microwave and infrared absorber. The spectroscopic characterizations of the formation processes of (BaFe₁₂O₁₉+BaTiO₃)/polyaniline composite were examined using Fourier transform infrared, ultraviolet-visible spectrophotometer, X-ray diffraction, scanning electron microscopy, transmission electron microscopy and electron spin resonance. Microwave absorbing properties were investigated by measuring reflection loss in 2-18 and 18-40 GHz microwave frequency range using the free space method. Thermal extinction measurements in the 3-5 and 8-12 μm were done to evaluate the shielding effectivity of infrared. The results showed that a significant absorption frequency range shifting and thermal extinction could be obtained by adding polyaniline to the BaFe₁₂O₁₉+BaTiO₃ blend.     

Microstructure and electromagnetic characteristics of BaTiO3/Ni hybrid particles prepared by electroless plating

To improve the microwave absorption ability, hybrid particles containing both dielectric loss of BaTiO₃ and magnetic loss of Ni were fabricated via electroless Ni plating on BaTiO₃ particles. A continuous Ni coating was successfully covered on the surface of the BaTiO₃. The effect of the Ni content on complex permittivity, complex permeability, and microwave absorption properties of BaTiO₃/Ni hybrid particles was investigated. The real (?′) and imaginary (?″) parts of complex permittivity as well as imaginary part of complex permeability (μ″) were found to increase with an increase in Ni content, while the variation of the real part of complex permeability (μ′) with Ni content was non-linear. The microwave absorption performances could readily be tuned base on the changing Ni content of the hybrid particles. The optimal absorption performances were attained when the content of Ni reached 38.9 wt% in hybrid particles.     

Experimental and numerical investigation of a ceramic dielectric resonator (DRA): CaCu3Ti4O12 (CCTO)

In this study, the CaCu₃Ti₄O₁₂ (CCTO) ceramic phase was synthesized by microwave heating in a much shorter time compared to the conventional heating methods. The results indicate that microwave processing is a promising method for preparing CCTO ceramics. CCTO was prepared using a domestic microwave oven operated at 2.45 GHz with 800 W. After a few minutes of microwave irradiation the formation of CCTO was confirmed by X-ray powder diffraction. The CCTO ceramic was studied in the medium-frequency (MF) range (100 Hz-1 MHz) and in the microwave range of frequencies. The experimental and theoretical characteristics of the dielectric resonator antenna are investigated.     

Optimization of electromagnetic matching of carbonyl iron/BaTiO3 composites for microwave absorption

Microwave absorbing materials filled with BaTiO₃ and carbonyl iron (CI) particles with various weight fractions (BaTiO₃/CI particles=100/0 to 0/100) are investigated. The dielectric and magnetic properties of the absorbers can be tuned by changing the weight ratio of BaTiO₃/CI particles in the frequency range of 2-18 GHz. Numerical simulations are also performed to design a single-layer and double-layer absorber. The minimum reflection loss of the composite filled with 20 wt% BaTiO₃ and 60 wt% CI particles at 2.0 mm thickness can be reached to −42 dB at 4.1 GHz. With the weight ratio of CI particles in the composite increased, the microwave absorption peak shifted to the lower frequency region. By using a double-layer absorber structure, the microwave absorption performance of the absorber is enhanced. The result shows that the total thickness of the absorber can be reduced below 1.4 mm by using a matching layer filled with 50 wt% BaTiO₃, and an absorption layer filled with 60 wt% BaTiO₃ and 20 wt% CI particles, whereas the reflection loss below −10 dB can be obtained in the frequency range of 10.8-14.8 GHz and the minimum reflection loss of −59 dB can be obtained at 12.5 GHz.