1,4-苯二硫醇的表面增强拉曼光谱和激发态的密度泛函理论研究

利用密度泛函理论(density functional theory,DFT)在B3LYP/6-311+g(d)(C,H,S)和Lanl2dz(Ag、Au)基组下对1,4-苯二硫醇分子及其复合物进行了结构优化和频率计算,得到了分子及其复合物稳定的化学构型和拉曼光谱。优化后的1,4-苯二硫醇分子的S—H键和苯环所在平面夹角为20.2°,分子非平面结构。模拟了金银团簇在苯硫醇分子表面的吸附行为,得到了金团簇和银团簇在分子表面的吸附方式,即,金团簇以接近平行的方向吸附于苯硫酚分子的表面而银团簇则以几乎垂直的方向吸附于分子表面。此外,还分析了静态极化率数值变化和自然键轨道(natural bond orbital,NBO)布局分析得到的电荷分布对拉曼光谱的强度变化的影响。复合物1,4-BDT-Au2,1,4-BDT-Ag2和三明治结构的Ag2-1,4-BDT-Au2拉曼光谱谱峰强度与静态极化率数值变化有很好的吻合。采用含时密度泛函理论(time dependent density functional theory,TDDFT)对Ag2-1,4-BDT-Au2复合物进行了激发态的分析计算,通过模拟吸收光谱和计算轨道跃迁单激发态,分析计算了三明治结构的电荷转移激发态,利用可视化的电荷转移,研究了表面增强拉曼(surface enhanced Raman scattering,SERS)化学增强机理。     

对巯基苯胺分子表面增强拉曼光谱的密度泛函理论研究

采用密度泛函理论(density functional theory,DFT),在B3LYP/6-31++-G** (C,H,N,S)/LANL2DZ(Ag)水平上,对对巯基苯胺(p-aminothiophenol,PATP)分子进行了几何结构优化,计算了 PATP的常规拉曼散射(normal Raman scatte...     

MgmBn(m=1,2;n=1-4)团簇结构与性质的密度泛函理论研究

用密度泛函理论(DFT)的杂化密度泛函B3LYP方法在6-31G*基组水平上对MgmBn(m=1,2;n=1-4)团簇各种可能的构型进行几何结构优化,预测了各团簇的最稳定结构.并对最稳定结构的振动特性、电离势、成键特性、极化率和超极化率等性质进行了理论研究.结果表明,团簇的最稳定结构大多是平面结构,团簇的稳定结构中通常是几个呈负电性的B原子形成一个负电中心,而其他B原子和Mg原子通常处在端位,且显正电性;团簇中通常是B-B键和B-Mg键共存,极少出现Mg-Mg键,计算得到的B-B键键长在0.153-0.182nm之间,B-Mg键键长在0.221-0.231nm之间.     

2-（甲苯-4-磺酰胺基）-苯甲酸的结构、光谱与热力学性质的理论研究

在B3LYP/6-31++G^**水平对2-（甲苯-4-磺酰胺基）-苯甲酸分子进行几何构型优化和频率的计算,得到红外光谱,拉曼光谱和不同温度下的热力学性质.结果显示,该分子羧基的碳氧原子、磺酰胺基的氮原子与苯环形成不同的离域大π键,空间位阻效应和共轭效应使两个苯环不在同一平面,二面角为63.2°.使用含时密度泛函理论方法计算第一激发态的电子垂直跃迁能,得到最大吸收波长为312.7?nm,属于近紫外区,这与该分子在二氯甲烷溶剂中的实验测得值307?nm一致. 关键词： 2-（甲苯-4-磺酰胺基）-苯甲酸 光谱 热力学性质 密度泛函理论     

太赫兹波段PCH7液晶分子极化率密度泛函研究

本文采用密度泛函方法计算了液晶分子PCH7在太赫兹波段的动态极化率,采用B3LYP/6-311G(d)方法对PCH7分子进行几何结构优化,在优化构型基础上,采用M06-2x/6-311++G(2d,p)方法计算了体系分子在589nm和1.5THz时的含频极化率,通过极化率密度考察了尾链、核心结构和极性取代基等不同基团对极化率数值的贡献。     

太赫兹波段PCH7液晶分子极化率密度泛函研究

本文采用密度泛函方法计算了液晶分子PCH7在太赫兹波段的动态极化率,采用B3LYP/6-311G(d)方法对PCH7分子进行几何结构优化,在优化构型基础上,采用M06-2x/6-311++G(2d,p)方法计算了体系分子在589nm和1.5THz时的含频极化率,通过极化率密度考察了尾链、核心结构和极性取代基等不同基团对极化率数值的贡献.     

太赫兹波段PCH7液晶分子极化率密度泛函研究

本文采用密度泛函方法计算了液晶分子PCH7在太赫兹波段的动态极化率,采用B3LYP/6-311G(d)方法对PCH7分子进行几何结构优化,在优化构型基础上,采用M06-2x/6-311++G(2d,p)方法计算了体系分子在589nm和1.5THz时的含频极化率,通过极化率密度考察了尾链、核心结构和极性取代基等不同基团对极化率数值的贡献。     

MgmBn(m=1,2;n=1—4)团簇结构与性质的密度泛函理论研究

用密度泛函理论(DFT)的杂化密度泛函B3LYP方法在6-31G基组水平上对Mg_mB_n(m=1,2;n=1-4)团簇各种可能的构型进行几何结构优化，预测了各团簇的最稳定结构.并对最稳定结构的振动特性、电离势、成键特性、极化率和超极化率等性质进行了理论研究.结果表明，团簇的最稳定结构大多是平面结构，团簇的稳定结构中通常是几个呈负电性的B原子形成一个负电中心，而其他B原子和Mg原子通常处在端位，且显正电性；团簇中通常是B-B键和B-Mg键共存，极少出现Mg-Mg键， 关键词： mB_n(m=1')" href="#">Mg_mB_n(m=1 n=1-4)团簇 密度泛函理论 结构与性质     

4-二甲基对巯基苯胺吸附于银簇上的光诱导催化偶联反应机理研究

采用密度泛函理论(DFT)中的B3LYP方法对4-二甲基对巯基苯胺吸附在Ag簇上催化偶联生成4,4’-二巯基偶氮苯(4,4’-DMAB)的反应机理进行理论研究。对比研究了暗反应条件下和光照条件下4-二甲基对巯基苯胺吸附在Ag簇上发生催化偶联生成4,4’-二巯基偶氮苯(4,4’-DMAB)的反应机理。为了了解4-二甲基对巯基苯胺中的巯基端S原子吸附在银簇上对反应的影响,比较研究了4-二甲基对巯基苯胺中的N和S原子同时吸附和仅N原子吸附在银簇上两种条件下的化学反应机理。用自然键轨道（NBO）理论和分子中的原子理论(AIM)分析了分子轨道间相互作用和成键特征。研究结果发现：该反应的关键在于氨基端两个甲基的脱去;在暗反应和光照条件下,两端吸附时第二个甲基脱去所需活化能均很高,分别为57.95 、63.88 kcal/mol,表明光照在反应中没起到催化作用。暗反应条件下巯基端吸附起到助催化作用,反应为两端协同催化过程。光照条件下银簇两端协同催化过程表现得不明显。     

苋菜红分子基态和激发态结构与光谱性质的量子化学研究

应用英国Edinburgh FLS920P光谱仪对苋菜红的吸收光谱和荧光光谱进行了实验检测.同时,分别采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)对苋菜红分子的基态和激发态构型进行优化,经振动分析合理后,比较这两种能态下分子结构的差异,并对其前线分子轨道和发光机制进行了分析.在此基础上,选用6种泛函并结合溶剂化模型(PCM)在6-311++G(d,p)水平上分别计算苋菜红的吸收光谱和荧光光谱.计算结果表明:苋菜红含有分子内氢键,基态结构非平面,两个萘环所在平面有一定的夹角,激发态时两个萘环共平面;CAM-B3LYP泛函得到光谱的理论值与实验结果基本吻合;421 nm处的荧光峰值波长对应的轨道跃迁为LUMO→HOMO-1.     

偶联分子对金纳米粒子在玻片上组装的影响

将金纳米粒子组装在用3-氨基丙基-三乙氧基硅烷(APES)修饰的普通玻片上,再分别用偶联分子对巯基苯胺、1,4-二巯基苯在该基底上再次组装金纳米粒子,结果表明用对巯基苯胺作为组装的偶联分子得到双层金纳米粒子结构,对巯基苯胺的表面增强拉曼光谱信号得到增强,而用1,4-二巯基苯作为组装的偶联分子得到单层金纳米粒子结构。     

Electronic properties of single-molecule junction: Effect of the molecular distortion

For a model system consisting of a benzenedithio (BDT) molecule sandwiched between two Au plates, the electronic properties as a function of different BDT geometry are investigated using density functional theory. The distorted BDT structures are got through stretching the electrode distance. The corresponding electronic properties, including the spatial distribution of the frontier orbits, the gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital levels and density of states at the Fermi energy are determined. It reveals that the molecular distortion essentially determines electronic structures. The result should be beneficial to understand the stress-dependent or structure-dependent transport mechanism of electrons of the BDT junction.     

DFT studies of surface‐enhanced Raman spectroscopy of 1,4‐benzenedithiol–Au2 complex under the effect of static electric fields

In this work, we demonstrate that the applied electric‐field strength and orientation can multiply modulate the Raman intensity and vibrational wavenumber of small molecule–metal complex, 1,4‐benzenedithiol–Au₂ (1,4BDT–Au₂), by density functional theory and time‐dependent density functional theory simulations. The polarizabilities are changed by the applied electric fields, leading to enhanced specific vibrational intensity and shifted vibrational wavenumber of the surface‐enhanced Raman scattering effect. The applied electric fields perturb the bonds and angles of the 1,4BDT–Au₂ complex. Owing to this reason, the peaks of Raman spectra related to these structures exhibit distinguishable responses in quasi‐static field (low‐frequency oscillating electric field). We use the visualized method of charge difference density to show that the electric fields tune the traditional excited state to pure charge‐transfer excited state. The charge‐transfer resonance transition produces enhanced Raman intensities for non‐totally symmetric modes and totally symmetric modes. These simulation results of the function of static electric field provide new guidance for the surface‐enhanced Raman scattering measurements. Copyright © 2015 John Wiley & Sons, Ltd.     

Irradiation of ultrasound to 5-methylbenzotriazole in aqueous phase: Degradation kinetics and mechanisms

Ultrasonic irradiation (640 kHz) leads to the effective degradation of 5-methyl-benzotriazole (5-MBT) in O₂ saturated aqueous solution. Up to 97% of 5-MBT is eliminated within 2 h of treatment. Upon extended treatment of 6 h, UV absorbance of the n → π¹ and π → π¹ transitions associated with aromatic and conjugated systems are completely removed, indicating complete destruction of the aromatic system in 5-MBT. The decomposition of 5-MBT follows pseudo-first order kinetics and the observed decomposition rate dropped significantly in the presence of tertiary butyl alcohol. Detailed product studies were performed employing a negative mode ESI LC–MS. Twenty eight intermediate products were detected during ultrasonic mediated degradation of 5-MBT. Reaction pathways are proposed based on the structures of products assigned to observed 28 masses from LC–MS and commonly accepted degradation pathways observed by thermal and hydroxyl radical mediated pathways often associated with ultrasonic treatment.     

氧族元素对D-A和D-π-A共聚物光吸收谱红移的第一性原理研究

D-A型共聚物作为有机聚合物太阳能电池的电子给体材料近年来引起广泛关注. 本文以苯并二噻吩(BDT)为电子给体单元, 苯并噻二唑(BT)为电子受体单元来模拟D-A共聚体; 并用噻吩环作为π桥, 构造出D-π-A(PBDT-DTBX, X = O, S, Se, Te)结构. 采用第一性原理的密度泛函理论, 系统地计算相应的电子结构和光吸收谱. 比较不同氧族元素和噻吩π-键桥对聚合物光吸收谱的影响. 研究结果表明: D-A共聚体中当X位元素以O, S, Se, T_e 替换时, 其体系的最高占有分子轨道(HOMO)能级变化不大, 最低未占有分子轨道(LUMO)能级逐渐靠近费米能级, 带隙逐渐减小. 在可见光区有两个较强的吸收峰, 随着X位元素原子序数增大, 位于4.0 eV左右的光吸收峰位基本不变, 另一光吸收峰强度明显增大并发生红移. 与D-A结构相比, D-π-A结构的带隙均有所减小, 其中X为Te时带隙最小; 光吸收峰强度随着氧族元素原子序数的增大也明显增大并发生红移. 通过比较光吸收系数和相应态密度, 结果表明, 4.0 eV 左右的光吸收峰主要是BDT单元的贡献, 氧族元素的改变主要影响519.4-703.9 nm范围的光吸收.     

Structures and electronic properties of SimN8-m（0 〈 m 〈 8） clusters： a density functional theory study

The geometries, electronic structures and related properties of SimN8-m（0 〈 m 〈 8） clusters are studied using density functional theory （DFT） with hybrid functional B3LYP. The calculated results reveal several trends. For any stoichiometric clusters, the lowest energy isomers with an alteration of N and Si atoms are favourable in energy if the numbers of Si and N atoms are large enough to form ... Si N-Si-N... alternative chains. The bond lengths of single Si-N bonds are very close to the corresponding values of the bulk and other SiN clusters. The geometries for N-rich and Si4N4 clusters are planar structures, but three-dimensional structures are favourable in energy for Si-rich clusters. With the increase of m, the isotropic polarizability and average polarizability increase, the total binding energies generally decrease, the HOMO-LUMO gap and vertical ionization potential oscillate with increasing number of valence electrons, and their values with even valence electrons are larger than those with odd valence electrons. The atomic charges, IR and Raman properties are also reported.     

Solvatochromic behavior of dyes with dimethylamino electron‐donor and nitro electron‐acceptor groups in their molecular structure

Six dyes with N,N‐dimethylaminophenyl and 4‐nitrophenyl or 2,4‐dinitrophenyl groups in their molecular structures were prepared and characterized. These compounds have different conjugated bridges (C?C, C?N, and N?N) connecting the electron‐donor and the electron‐acceptor groups. All compounds are solvatochromic, with reverse solvatochromism occurring. The solvatochromic band observed in each spectrum for the dyes is due to a π ? π* transition, of an intramolecular charge transfer nature, which occurs from the electron‐donor N,N‐dimethylaminophenyl group to the electron‐acceptor group in the molecules, which is reinforced by the structures of the compounds optimized by applying density functional theory, which exhibit high planarity. The reverse solvatochromism was explained considering two resonance structures. The benzenoid form is better stabilized in less polar solvents and characterizes the region displaying positive solvatochromism, while the dipolar form is better stabilized in more polar solvents, in the region of negative solvatochromism. The Catalán multiparametric approach was used to study the contribution of solvent acidity, basicity, dipolarity, and polarizability to the solvatochromism exhibited by the compounds. These compounds are good candidates for the investigation of the polarizability and, to a lesser extent, the dipolarity of the medium, with very little interference from specific interactions of the solvent through hydrogen bonding. Copyright © 2014 John Wiley & Sons, Ltd.