新型双环腔结构可调谐全光波长转换器的实验研究

利用周期性畴反转铌酸锂光波导级联和频与差频的二阶非线性效应，提出并实验验证了一种新颖的基于无源光波导双环腔结构的可调谐全光波长转换方案，实现了皮秒脉冲从信号光波长到空闲光波长的转换.采取的脉冲信号光脉宽为1.57ps，重复频率为40GHz，抽运光和控制光由双环腔激光器提供，无需任何外界注入连续光. 关键词： 全光波长转换器 双环腔 周期性畴反转铌酸锂 级联和频与差频二阶非线性效应     

1.5μm波段基于级联二阶非线性的铌酸锂光波导全光波长变换的理论分析

研究了基于级联二阶非线性的铌酸锂波导全光波长变换器的特性.首先从耦合模方程出发,比较了数值分析结果与小信号近似分析的结果.其次在数值分析基础上,分析了铌酸锂晶体的温度变化导致相应基频光波波长与极化反转光栅周期的变化关系.最后分析了在不同相互作用长度下,转换的光波功率与有效基频光波波长带宽、温度调谐带宽、极化反转光栅周期带宽等关系,以对全光波长变换器件进行优化设计 关键词： 级联二阶非线性 波长变换 准位相匹配 铌酸锂光波导     

基于光纤环形腔激光器的可调谐全光波长转换器的研究

在光纤环形腔激光器中引入周期极化反转铌酸锂(PPLN)光波导，用该激光器产生的连续光作为抽运光和控制光，使其与外加的信号光发生非线性效应实现可调谐波长转换.介绍了基于准相位匹配的PPLN光波导中的和频与差频级联型全光波长转换器的基本原理.对抽运光、信号光、控制光以及转换光的光功率随着PPLN光波导的变化进行了模拟.还对转换效率随着转换光波长的变化进行了数值计算.实验验证了该波长转换器的可调谐性. 关键词： 周期极化反转铌酸锂 和频与差频 可调谐全光波长转换 光纤环形腔激光器     

基于PPLN光波导和频与差频级联型全光波长转换的研究

介绍了基于准相位匹配周期极化反转铌酸锂光波导的和频与差频(SFG DFG)级联型全光波长转换技术的基本原理.计算了SFG DFG级联型波长转换的转换效率,分析了抽运光功率以及两个抽运光之间的间距对转换效率的影响,抽运光功率越大,转换效率越高;转换效率随着间距的增大先增大后减小.单抽运调节时的抽运带宽为0.5 nm,同时对信号光脉冲还有压缩作用,压缩比是0.68.     

周期性极化铌酸锂波导全光开关特性分析

从理论方面研究了基于和频与差频级联二阶非线性效应的周期性极化铌酸锂波导全光开关的特性,给出了耦合模方程在满足相位匹配条件下小信号近似的解析表达式.用数值方法求解耦合模方程,讨论了相位失配情况下输出的信号光功率与控制光功率的关系.分析了全光开关器件的极化反转光栅周期、晶体温度、控制光波长等参量的容差特性与相互作用长度和晶体温度的关系 关键词： 级联二阶非线性 光开关 准相位匹配 周期性极化铌酸锂     

基于PPLN波导中倍频与差频效应的全光波长转换

对准相位匹配的铌酸锂光波导中基于倍频与差频级联二阶非线性效应的全光波长转换进行了研究.在建立理论模型的基础上,分别对单脉冲以及序列光脉冲的波长转换过程进行了数值模拟,并对转换过程中的走离现象以及脉冲延迟进行了分析.模拟结果表明信号光与抽运光脉冲非同步输入的情况下可以克服走离效应的影响,得到更好的转换效率.另外,在抽运时钟脉冲的驱动下,输入的40 Gb/s的NRZ信号光可以转换为RZ转换光,且波形较好.     

周期域反转铌酸锂可调谐波长转换器的皮秒脉冲实验

实验研究了周期域反转铌酸锂光波导级联和频与差频二阶非线性效应(cSFG/DFG)皮秒脉冲间的可调谐波长转换。信号光采用重复频率为40 GHz,脉宽为1.57 ps的脉冲信号。当输入信号光和第一个控制光波长分别为1554.4 nm和1532.5 nm时,通过调节第二个控制光波长由1550.5 nm到1541.0 nm,输出信号光波长可从1536.0 nm调谐至1545.2 nm。当输入信号光波长改变时,通过改变第一个控制光波长以满足和频过程的准相位匹配条件,同时调节第二个控制光波长可以实现输出信号光波长的可调谐。实验中利用两个窄带可调谐滤波器有效抑制了掺铒光纤放大器引入的放大自发辐射噪声,同时观察到了波长下转换和波长上转换。     

基于周期极化反转铌酸锂光波导高速非归零码到归零码的转换

研究了基于周期极化反转铌酸锂光波导级联二阶非线性效应实现非归零码到归零码高速全光码型转换的新方案,使用的是马赫-曾德尔干涉仪结构.转换原理是非归零码信号光在级联倍频和差频过程中受到的放大作用引起马赫-曾德尔干涉仪的不平衡,进而通过干涉相消产生归零码信号光输出.首先从耦合波方程出发,数值模拟了非归零码到归零码码型转换过程.然后分析了波导长度、光功率、相对时延对消光比的影响并对码型转换进行了优化设计.最后分析了转换带宽,模拟计算表明信号光在90nm的3dB带宽内可调谐,进而可以实现多信道的同时转换. 关键词： 码型转换 级联倍频和差频 周期极化反转铌酸锂 马赫-曾德尔干涉仪     

铌酸锂光波导在超宽带信号产生中的新应用

铌酸锂光波导具有非线性系数大、响应速度快、低噪声等优点,因此在高速光信号处理中有着非常广泛的应用。铌酸锂光波导中有倍频、和频、差频、级联倍频和差频、级联和频与差频等二阶和级联二阶非线性效应,利用这些非线性效应可以实现多种高速全光信号处理功能。     

基于周期极化反转铌酸锂光波导高速非归零码到归零码的转换

研究了基于周期极化反转铌酸锂光波导级联二阶非线性效应实现非归零码到归零码高速全光码型转换的新方案，使用的是马赫-曾德尔干涉仪结构.转换原理是非归零码信号光在级联倍频和差频过程中受到的放大作用引起马赫-曾德尔干涉仪的不平衡，进而通过干涉相消产生归零码信号光输出.首先从耦合波方程出发，数值模拟了非归零码到归零码码型转换过程.然后分析了波导长度、光功率、相对时延对消光比的影响并对码型转换进行了优化设计.最后分析了转换带宽，模拟计算表明信号光在90nm的3dB带宽内可调谐，进而可以实现多信道的同时转换.     

在周期性极化铌酸锂波导中的波长转换与光谱分析

实验研究了在准相位匹配LiNbO₃波导中级联的倍频和差频波长转换,通过对转换频谱分析和波形对比分析,讨论了在脉冲泵浦情况下走离效应对光脉冲之间波长转换的影响：由于波导的色散性能,不同波长的光脉冲在波导中传播具有不同的群速度,处在0.8 μm光波段的倍频光脉冲比处在1.55 μm光波段的泵浦光脉冲的传播速度慢,导致了倍频光脉冲与泵浦光脉冲在传播的过程中发生走离;因此倍频脉冲在频域被压缩而在时域被展宽,并遗传给差频过程使得转换脉冲的谱宽变窄、脉宽增加、占空比变大,表明脉冲光泵浦波长转换对信号频谱及波形不是严格透明的转换。实验同时实现了一对多通道的波长转换,表明连续控制光的线宽对转换信号的信噪比有较大的影响。     

Cascaded wavelength conversions based on sum-frequency generation and difference-frequency generation

A novel wavelength conversion scheme based on cascaded sum-frequency generation (SFG) and difference-frequency generation (DFG) is proposed and demonstrated in a MgO-doped LiNbO3 quasi-phase-matched waveguide. In this scheme, two pump wavelengths are set outside the communication band. It is shown that the same conversion efficiency can be achieved by use of two pump sources with lower output power (P1, P2) in this scheme compared with the conventional cascaded wavelength conversion technique based on second-harmonic generation and DFG with a single higher-power pump beam (P = P1 + P2) that is due to the use of a larger SFG nonlinear coefficient. The results significantly influence the selection of a suitable nonlinear interaction scheme for practical applications.     

A Novel All-optical Wavelength Converter Based on Self-pump Four-wave Mixing

A novel scheme of all-optical wavelength converter(AOWC) based on dual pump four-wave mixing(DP-FWM) was demonstrated. To suppress the ASE noise of the semiconductor optical amplifier (SOA), one of the two pumps was generated interiorly from a loop laser constructed mainly by tunable optical filter and SOA. The theoretical model and some experimental results were presented.     

A Novel All-optical Wavelength ConverterBased on Self-pump Four-wave Mixing

A novel scheme of all-optical wavelength converter(AOWC) based on dual pump four-wave mixing(DP-FWM) was demonstrated. To suppress the ASE noise of the semiconductor optical amplifier (SOA), one of the two pumps was generated interiorly from a loop laser constructed mainly by tunable optical filter and SOA. The theoretical model and some experimental results were presented.     

饱和吸收体实现波长转换的理论模型分析

作为自动交换光网络中的核心器件,全光波长转换器在网络中发挥着重要作用。基于半导体激光器速率方程,提出了新的基于饱和吸收体实现全光波长转换器的理论模型;并针对该理论模型,采用小信号分析方法讨论了波长转换的频率调制响应特性;数值求解了不同偏置电流、码速、输入信号光功率对波长转换性能的影响,对于实现和优化基于饱和吸收体的全光波长转换器有理论指导作用。     

Optimization of the idler wavelength tunable cascaded optical parametric oscillator based on chirp-assisted aperiodically poled lithium niobate crystal

We present the numerical results for the optimization of the pump-to-idler conversion efficiencies of nanosecond idler wavelength tunable cascaded optical parametric oscillators(OPO) in different wavelength tuning ranges, where the primary signals from the OPO process are recycled to enhance the pump-to-idler conversion efficiencies via the simultaneous difference frequency generation(DFG) process by monolithic aperiodically poled, magnesium oxide doped lithium niobate(APMg LN) crystals. The APMg LN crystals are designed with different chirp parameters for the DFG process to broaden their thermal acceptance bandwidths to different extents. The idler wavelength tuning of the cascaded OPO is realized by changing the temperature of the designed APMg LN crystal and the cascaded oscillation is achieved in a single pump pass singly resonant linear cavity. The pump-to-idler conversion efficiencies with respect to the pump pulse duration and ratio of OPO coefficient to DFG coefficient are calculated by numerically solving the coupled wave equations. The optimal working conditions of the tunable cascaded OPOs pumped by pulses with energies of 350 μJ and 700 μJ are compared to obtain the general rules of optimization. It is concluded that the optimization becomes the interplay between the ratio of OPO coefficient to DFG coefficient and the pump pulse duration when the idler wavelength tuning range and the pump pulse energy are fixed. Besides, higher pump pulse energy is beneficial for reaching higher optimal pump-to-idler conversion efficiency as long as the APMg LN crystal is optimized according to this pump condition. To the best of our knowledge,this is the first numerical analysis of idler wavelength tunable cascaded OPOs based on chirp-assisted APMg LN crystals.     

Theoretical and Experimental Study on all-optical Wavelength Converters Based on the Single-port-coupled SOA

We analyze the all-optical wavelength converter (AOWC)-based on cross-gain modulation (XGM) in a single-port-coupled (SPC) semiconductor optical amplifier (SOA). A comprehensive dynamic model is developed by considering longitudinal variations of the carrier density, the residual rear-facet reflectivity of the SOA and the wide-band spontaneous noise emission. The numerical simulations for the novel wavelength conversion at 10 Gbit/s are presented based on the model. The extinction ratio (ER), conversion efficiency and pattern effect of the SPC-SOA-based wavelength converters are investigated, respectively. Compared with the traditional scheme of the double-portcoupled (DPC) SOA, the SPC-SOA scheme has better performance. We have obtained that the ER is higher than 10 dB with the pump wavelength turned over 15nm from experiments. The experimental results are in agreement with the simulation results.     

THz wave generation by repeated and continuous frequency conversions from pump wave to high-order Stokes waves

We propose a novel scheme for THz wave generation by repeated and continuous frequency conversions from pump wave to high-order Stokes waves (HSWs). The repeated frequency conversions are accomplished by oscillations of Stoke waves in resonant cavity (RC) where low-order Stokes waves (LSWs) are converted to high-order Stokes waves again and again. The continuous frequency conversions are accomplished by optimized cascaded difference frequency generation (OCDFG) where the poling periods of the optical crystal are aperiodic leading to the frequency conversions from low-order Stokes waves to high-order Stokes waves uninterruptedly and unidirectionally. Combined with the repeated and continuous frequency conversions, the optical-to-THz energy conversion efficiency (OTECE) exceeds 26% at 300 K and 43% at 100 K with pump intensities of 300 MW/cm².     

高功率,红光至中红外可调谐腔内和频光学参量振荡器

本文利用高重复频率,高平均功率大模场面积飞秒光纤激光器作为同步抽运源,抽运以多周期极化掺氧化镁铌酸锂为非线性晶体的单共振光学参量振荡器,获得了高功率可调谐红光至中红外光,信号光调谐范围为1450—2200 nm,闲频光调谐范围为2250—4000 nm,在2 W的抽运功率下,信号光输出波长为1502 nm时获得最大输出功率374 mW,转换效率为18.7%,脉冲宽度为144 fs,此时中红外输出中心波长为3.4μm,平均功率为166 mW.再利用BBO晶体对信号光进行腔内和频,获得和频光输出波长调谐范围为610—668 nm,在4.1 W抽运的情况下,最高平均功率为615 nm处的694 mW,转换效率达16.9%.     

Performance analysis of symmetrical 10 Gbps colorless WDM-PON using subcarrier modulated downstream and wavelength converted upstream through RSOA

Here we have demonstrated a novel architecture of colorless wavelength division multiplexed-passive optical network (WDM-PON) and analyze its performance which is capable of transmitting 10 Gbps data symmetrically in both downstream and upstream. In this architecture downstream data is subcarrier modulated (SCM) using radio frequency (RF) as subcarrier and laser frequency as carrier with the help of a Mach–Zehnder modulator (MZM). For upstream data modulation an electro-absorption modulator, an optical coupler and reflective semiconductor optical amplifier (RSOA) are used. Upstream data is transmitted through wavelength conversion between pump wavelength and continuous wave light sent from central office (CO) using cross gain modulation (XGM) in RSOA. Pump wavelengths have separate wavelength band than the carrier's wavelength sent from optical network unit (ONU) and can be chosen any one in its band. Since carrier reuse scheme is implemented so all the ONUs are operates in colorless mode. Effect of ER of delay interferometer (DI) on output OCSR of DI for different input OCSR is performed for SCM data. Simulation is performed with all 16 downlink and 16 uplink channels having data rate of 10 Gbps having acceptable performance.