The vapor phase Raman spectra,Raman band contour analyses,Coriolis constants,force constants,and values for thermodynamic functions of the trihalides of group V

The vapor phase Raman spectra have been recorded of the molecules PX₃ (X = F, Cl, or Br), AsX₃ (X = F, Cl, Br, or I), and SbX₃ (X = Cl, Br, or I) in sealed tubes at 22–365°C as appropriate. Attempts to record the vapor phase Raman spectra of the molecules PI₃, SbF₃, and BiX₃ (X = F, Cl, Br, or I) were unsuccessful. The infrared and Raman rotational branch separations of the a₁ species fundamentals for these molecules are in agreement with the theoretically calculated values. The Raman band contours of the e-species fundamentals have been analyzed to yield, in favorable cases, values for the corresponding Coriolis constants which have been compared with those obtained from infrared band contour analyses, and which have been employed to constrain the e-species force constants. It is concluded that the Raman contour method for defining Coriolis and thus force constants should be regarded as further, but not necessarily the best, experimental method with which to help to constrain the field. Values for various thermodynamic functions of the molecules have been calculated from the new values for the fundamental frequencies and from the most recent structural data.     

Conformational equilibria in dihaloheptasilanes X2Si[SiMe(SiMe3)2]2 with X = F,Cl, Br,I: A Raman spectroscopic and quantum chemical DFT study

Equilibrium geometries, stabilities and vibrational wavenumbers for conformers of the dihaloheptasilanes X₂Si[SiMe(SiMe₃)₂]₂ with X = F, Cl, Br and I were calculated at the density functional B3LYP level employing 6‐311G(d) basis sets and SDD pseudopotentials for Br and I. Two spectroscopically distinct low‐energy conformers were located for all four heptasilanes with energy differences of 5.5, 4.7, 1.9 and 1.2 kJ mol⁻¹ for X = F, Cl, Br and I, respectively. Five more conformers were found for difluoroheptasilane and four for X = Cl, Br and I. They all have relative energies larger than 7.5 and up to 17 kJ mol⁻¹ and are negligibly populated at room temperature. Variable temperature solution Raman spectra (−70 to + 100 °C) in a wavenumber range typical for Si Si stretching vibrations (280‐350 cm⁻¹) confirm these results. For X = Br and I, no temperature effects at all could be observed as a very rapid inter‐conversion between the two low‐energy conformers, which is fast even on the time scale of Raman spectroscopy, occurs. For X = Cl, rapid inter‐conversion also occurs, and a third conformer could be detected at higher temperatures (50–100 °C). For X = F, intensity changes with temperature are consistent with the presence of two low‐energy conformers. Copyright © 2007 John Wiley & Sons, Ltd.     

X射线荧光在地质材料卤族元素分析中的应用评介

卤族元素氟、氯、溴、碘广泛分布在地圈、水圈和生物圈,它们是矿产资源,也是许多地学研究的信息载体,更与人类生活紧密相关.卤族元素分析是地质分析的重要组成部分,而X射线荧光光谱分析方法在当今的卤族元素分析中占有重要地位.本文收集我国1988年—2020年间X射线荧光光谱分析地质材料氟、氯、溴、碘的文献126篇,在简述卤族元...     

N.M.R. study of internal motion in hexahydrated acid fluorides of cobalt and nickel

A linear relationship between the viscosity B-coefficient of the Jones-Dole equation for aqueous solutions of certain alkali metal salts and the enthalpy of hydration of the gaseous monatomic constituent ions has been established. The assumption that a similar rectilinear law applies to ammonium halides appears justified and the enthalpies of solution of NH₄ ⁺(g)+X^-(g) have been estimated and used to obtain magnitudes for the lattice energies of NH₄X(c) [X=F, Cl, Br, I]. In conjunction with experimental thermochemical data, the latter yield consistent results for the proton affinity of ammonia ΔH ₁ ^?=860·5±2·0 kJ mol^-1 (298·15 K). The lattice energies of the salts are, (in kJ mol^-1) 834 (NH₄F), 708 (NH₄Cl), 682 (NH₄Br) and 637(NH₄I).     

Transition energies of ND4Cl and ND4Br in the transition I⇄II

The energy of the transition I?II of ND₄Cl and ND₄Br was measured by using a direct differential calorimetric method. The results 1024 cal/mole for ND₄Cl and 847 cal/mole for ND₄Br were obtained. The accuracy was estimated to be about 2%. The approximate transition temperatures 169°C for ND₄Cl and 118°C for ND₄Br were observed.     

Using chemometric methods for overlap correction of sodium–zinc spectral lines generated by wavelength dispersive X‐ray fluorescence in mineral samples

Partial least squares, principal component regression and support vector machine multivariate methods were used for overlap correction of sodium–zinc (Na(Kα)–Zn(Lα)) spectral lines generated by means of wavelength dispersion X‐ray fluorescence (WDXRF) combined with standard‐less software (IQ+) technique for the analyses of mineral samples. This methodology uses one scan channel using PX1 analyzer crystal, 550‐µm collimator, flow detector (Ar + CH₄), and rhodium (Rh) tube for determination of Na and Zn in mineral compositions in minimum time. The calibration matrix was made up of 35 samples containing different amounts of Na₂O and ZnO. The considered concentration ranges were 0–5% for both Na₂O and ZnO. The values for 2θ angle were recorded between 25° and 29.9° at every 0.1°. Variable tube powers (kV ? mA) were used to investigate the effect of tube power on the analyses of elements. The validation of the multivariate methods was realized by analyzing soil samples. Atomic absorption and flame photometry methods were used as reference methods for analyzing Zn and Na in the soil samples, respectively. The results of using chemometric methods, WDXRF (standard‐less software) and reference method determined partial least squares and support vector machine models obtained more acceptable results for Na₂O in presence of ZnO than those of WDXRF (standard‐less software). Copyright © 2013 John Wiley & Sons, Ltd.     

Ultraviolet photoelectron spectra of gas phase and condensed tin and lead dihalides (MX2 ; M = Sn,Pb; X = Cl,Br, I)

The photoelectron spectra and electronic structures of the methylene dihalides, CH₂X₂ (X = F, Cl, Br and I), have been calculated by the overtapping-spheres SCF-Xα-MS method. The results are in good agreement with experimental data. Calculated assignments of the spectra are also presented and interpreted by assuming interaction between lone-pair and bonding orbitals.     

Field ion microscopy of halogens on tungsten

The adsorption of Cl, Br and I on W is studied by field ion microscopy. It is shown that contrary to the experience with other adsorbed gases, Cl, Br and I can be imaged. Particular attention is given to the formation of ordered structures on the {111} plane. It is concluded that the observed $\text{3}\text{×}\text{3}\text{-R(30°)}$ structure is Field-induced. At higher fields Cl and Br corrode W, while I desorbs without field corrosion. The presence of the imaging gas has a considerable influence on the desorption process. The results are discussed in terms of energy arguments.     

Regium bonds formed by MX (M═Cu,Ag, Au; X═F,Cl, Br) with phosphine-oxide/phosphinous acid: comparisons between oxygen-shared and phosphine-shared complexes

ABSTRACT

Regium bonds interaction between phosphine oxide (H₃PO), the trans phosphinuous acid (T-PH₂OH), the cis phosphinuous acid (C-PH₂OH) and MX (M═Cu, Ag, Au; X═F, Cl, Br) complexes were investigated by means of ab initio MP2/aug-cc-pVTZ method. For phosphinuous acid and MX complexes, two types of regium bonded interaction (trans and cis complexes) are observed and the two types of structures are very easily transformed from one type to another due to a low energy barrier. The molecular interaction energies are in the order of Au?>?Cu?>?Ag, F?>?Cl?>?Br and increase with the decrease of intermolecular distance R_int. Two resonance-type structures of P:M-X (ωI) ? P–M:X (ωII), O:M-X (ωI) ? O–M:X (ωII) are recognised by the natural resonance theory (NRT) and the natural bond orbitals (NBOs) analysis. The competition between ωI ? ωII resonance structures mainly arises from hyperconjugation interactions, in all phosphor-shared complexes, P–M:X resonance accounts for a larger proportion which leads to the covalent characters. All of complexes have been described in terms of their electron density properties.     

Eu3+:LaOX(X=Cl,Br, I)晶体的角重迭晶场参数计算

本文运用角重迭模型(AOM)在考虑其全部四个参数eσ、eπ、eδ及eφ的基础上首次对Eu3+:LaOX(X=Cl,Br,I)晶体在晶场作用下的能级劈裂进行了拟合.     

Photoelectron spectra of bis-cyclopentadienyl metal dihalides

He(I) and HE(II) photoelectron spectra are reported for (η-C₅H₅)₂MX₂ (M = Ti; X = F, Cl, Br, I: M = Zr, Hf; X = Cl, Br: M = Ta; X = Cl, Br) and (η-MeC₅H₄)₂MX₂ (M = Nb, X = Cl: M = Mo; X = Cl, Br, I). A substantial variation is found in the ordering of the halogen and cyclopentadienyl ionizations, the order being dependent on the metal as well as on the halogen. The compounds may be divided into three classes, namely, those in which the electrons in cyclopentadienyl e₁ orbitals ionize at a lower energy than those occupying halogen pπ orbitals, those in which halogen pπ electrons have lower ionization energy than cyclopentadienyl e₁ electrons and those in which the corresponding electrons arise from extensively delocalized molecular orbitals with significant contributions from both these categories of fragment orbital.     

Cooperative effects between F … Ag bonded and X … Br (Cl) halogen-bonded interaction in BrF(ClF) … AgX … BrF(ClF) (X = F,Cl, Br) complexes: a theoretical study

The equilibrium structures, interaction energies and binding properties of ternary BrF(ClF)?… AgX?…?BrF(ClF)(X?=?F, Cl, Br) complexes and the corresponding binary systems have been studied by DFT method at the X3LYP/aug-cc-pVQZ level. Cooperative effects are probed by analysing charge transfer, electronic properties and orbital interactions when F?…?Ag bond and X?…?Br (Cl) halogen bond coexist in the same complex. The results indicate that the X?…?Br (Cl) halogen bond has a greater enhancing effect than the F?…?Ag bond does, resulting in a shorter binding distances, larger interaction energies and greater electron densities for the ternary complexes than for the corresponding binary ones. In addition, the origins of both the F?…?Ag bond and X?…?Br (Cl) halogen bond have been deduced via energy decomposition.     

Vibrational spectra of Matrix isolated binary and mixed cadmium dihalides

The Raman spectra CdX₂ and CdXY (X, Y = Cl, Br, I) molecules isolated in solid krypton at 20°K are reported together with the matrix isolation infrared spectrum of CdX₂ and CdXY (X, Y = Br, I) molecules. Isotopic effects and force constants are discussed and several irregularities in them are interpreted as possible indications of slightly bent structures. The bending vibration frequency of CdClI as well as several bands assigned to dimers are also reported.     

Density functional study on chirospectra of hydrogen-bonded systems X-（H2O）3（X=F,Cl,Br,I）

This paper calculates the molecular structures,infrared,Raman,circular dichroism spectra and optical rotatory powers of some hydrogen-bonded supramolecular systems as a cyclic water trimer,(H2O)3 and its pyramidal halide complexes,X-(H2O)3(X = F,Cl,Br,I) with the gradient-corrected density functional theory method at the B3LYP/6-311++G(2d,2p) and B3LYP/Aug-cc-pVTZ levels.It finds that the complexation of halide anions with the water trimer can efficiently modulate the chirally optical behaviors.The calculated vibrational circular dichroism spectrum illuminates that the vibrational rotational strength of S(+)-(H2O)3 mostly originates from the O-H rocking modes,whereas chirality of S(-)-X-(H2O)3(X = F,Cl,Br,I) has its important origin in the O-H stretching modes.The calculated optical rotatory power demonstrates that S(+)-(H2O)3 and S(+)-F(H2O)3 are positively chiral,whereas S(-)-X-(H2O)3(X = Cl,Br,I) are negatively chiral.With the polarizable continuum model,calculated bulk solvent effect in the solvents water and carbontetrachloride and argon shows that the positive chirality of S(+)-(H2O)3 is enhanced and the negative chirality of S(-)-X-(H2O)3(X = Cl,Br,I) and the positive chirality of S(+)-F(H2O)3 are reduced with an augmentation of the solvent dielectric constant.     

双钙钛矿卤化物Cs2AgFeX6（X = Cl，Br，I）电子结构和光学性质的第一性原理研究

近年来，银卤化物双钙钛矿作为铅基杂化卤化物钙钛矿的潜在环保替代品得到了广泛的研究。最近实验上合成的新型无铅双钙钛矿单晶材料Cs2AgFeCl6是一种立方结构半导体，吸收光谱可拓宽至800 nm。本论文采用密度泛函理论的第一性原理方法，对Cs2AgFeX6（X = Cl，Br，I）的电子结构和光学性质进行研究，讨论了二者之间的内在关联，并分析了X位元素的改变对材料性质的影响。电荷密度计算结果显示，由Cl到I，Fe-X键逐渐减弱，即原子对电荷的束缚能力减弱。另一方面，三种材料的带隙宽度是逐渐减小的，Cs2AgFeCl6和Cs2AgFeBr6带隙分别为1.40 eV和0.91 eV，而Cs2AgFeI6则呈现金属性质。Cs2AgFeX6双钙钛矿的光谱特征峰随 X 位原子序数的增加明显红移，且在可见至红外光波段均有明显的光吸收：Cs2AgFeCl6在534 nm处的吸收系数达到21.28×104 cm-1，Cs2AgFeBr6在712 nm处的吸收系数为20.54×104 cm-1，而Cs2AgFeI6在1200 nm后的红外波段有一极宽的吸收峰，吸收系数可以达到10×104 cm-1。本论文为Cs2AgFeX6（X = Cl，Br，I）在光电子器件领域的广泛应用提供了理论指导。     

Line width transitions in the deuteron magnetic resonance of polycrystalline ND4Cl,ND4Br,and ND4I

The line width of the deuteron magnetic resonance in polycrystalline ND₄Cl, ND₄Br, and ND₄I has been measured from 300°K down to 115°K. Below 200, 172, and 140°K in ND₄Cl, ND₄Br, and ND₄I, respectively, the line rapidly broadens. In addition, the I ? II transition of ND₄I causes a change of line width. The observed line widths agree with those calculated by the present writers from theVan Vleck second moment formula assuming a Gaussian line shape. For this agreement, in the phases II and III of ND₄Cl and in the phase I of ND₄I the deuteron-halogen interactions should be taken into account, whereas in the phases II and III of ND₄Br and ND₄I they should be omitted.     

A relativistic density functional study of gaseous uranium tetrahalides

The molecular structures and vibrational frequencies of gaseous UX₄ (X = F, Cl, Br and I) molecules have been investigated using generalized gradient approximation (GGA) functions (BP, BLYP, PBE and RPBE) with triple-zeta polarized (TZP) basis set. Scalar relativistic effects are introduced via the zeroth-order regular approximation (ZORA) approach to the Dirac equation in the present study. Of the methods examined here the RPBE has the best performance in terms of the errors compared with experiment and reference for the vibrational frequencies. The bond dissociation energies (BDE) for U–X bonds in the UX₄ were obtained using the RPBE method, and are in good agreement with experimental values. In addition, satisfactory calculated entropies of UX₄ have also been obtained at temperatures ranging from 600 to 1200 K in 50 steps using the same method.     

卤代苯甲酰基二茂铁的紫外光谱研究

研究了全系列的邻、间、对-卤代苯甲酰基二茂铁的紫外光谱,发现化合物紫外光谱K带及R带 λ_max值呈现如下规律：卤素相同而取代位置不同时,K带和R带λ_max值均为λ_max(m-X)＞λ_max(p-X)＞λ_max(o-X); 卤素不同而取代位置相同时,K带λ_max值顺序为λ_max(Cl)＞λ_max(Br)＞λ_max(I)＞λ_max(F),而R带λ_max值顺序为λ_max(I)＞λ_max(Br)＞λ_max(Cl)＞λ_max(F), 邻位为Br,I时出现例外。     

Analytical Evaluation of a Reduced-Pressure Microwave-Induced Plasma Studied by Optical Emission Spectrometry Method

ABSTRACT

The authors describe a system that utilizes a reduced-pressure (RP) air-cooled microwave-induced plasma (MIP) torch to interface an ultrasonic nebulizer (USN) with an optical emission spectrometer (OES). Argon was investigated as plasma gas. The analytical potential of such techniques was illustrated for the determination of elements. A univariate approach and simplex optimization procedure was used to achieve optimized conditions and derive analytical figures of merit. Analytical performance of the RP-MIP was characterized by determination of the limits of detection (LODs) and precision (RSDs) with the RP-MIP-OES observed at flow rate of 10 µL min^?1 without removal of any matrix. The experimental concentration detection limits for simultaneous determination, calculated as the concentration giving a signal equal to three times the standard deviation of the blank (LOD, 3σ_blank criterion, peak height), were 15, 4.5, 6.2, 2.9, 31, 6.3, 3.1, 13, 5.4, and 33 n g mL^?1 for Ba, Ca, Cd, Cu, Fe, Mg, Mn, Ni, Sr, and Zn, respectively. Absolute limits of detection were 167, 50, 68, 32, 350, 69, 34, 143, 59, and 363 pg for Ba, Ca, Cd, Cu, Fe, Mg, Mn, Ni, Sr, and Zn, respectively. The method offers relatively good precision (RSD ranged from 7 to 12%) for liquid analysis and microsampling capability. The accuracy of the method was verified by the use of digested certified reference materials (SRM 1648 (Urban Particulate Matter), IAEA 336 (Lichen), SRM 2710 (Montand Soil), INCT-SBF-4 (Soya Bean Flour)) and by aqueous standard calibration technique. The analyte concentrations in reference materials were in satisfactory agreement with the certified values. The method requires small amounts of reagents and reduces contamination and losses. In general, low-pressure argon discharges proved to be superior, in terms of detection limits (DLs), to atmospheric pressure MIPs for the excitation of the analyte atomic or ionic emission.