A Fe<Superscript>3+</Superscript>/Hg<Superscript>2+</Superscript>-Selective Anthracene-Based Fluorescent PET Sensor with Tridentate Ionophore of Amide/β-Amino Alcohol

A new anthracene-based fluorescent PET sensor 1 with a tridentate ionophore of amide/β-amino alcohol displays very good selectivity and sensitivity for Fe³⁺ (K _a = 1.6 × 10³ M⁻¹) and Hg²⁺ (K _a = 2.1 × 10³ M⁻¹) in CH₃CN–H₂O (3:7, v/v) with detection limit of 1 μM. More fluorescence enhancement was observed when 1 selectively detected Fe³⁺ or Hg²⁺ in CH₃CN and its detection limit was up to 0.03 μM.     

A Novel Hg<Superscript>2+</Superscript> Selective Ratiometric Fluorescent Chemodosimeter Based on an Intramolecular FRET Mechanism

A irreversible Hg²⁺ selective ratiometric fluorescence probe FR, a fluorescein fluorophore linked to a rhodamine B hydrazide by a thiourea spacer, was designed and synthesized. The developed probe FR exhibited great ratiometric fluorescence enhancement and remarkable yellow-magenta color change toward Hg²⁺ with excellent selectivity in aqueous acetone solution, and the ratiometric fluorescence response to Hg²⁺ was not interfered by other metal cations including Fe³⁺, Co²⁺, Ni²⁺, Cr³⁺, Zn²⁺, Pb²⁺, Cd²⁺, Ca²⁺, Mg²⁺, Ba²⁺ and Mn²⁺. The linear range and the detection limit of this supposed ratiometric fluorescence method for Hg²⁺ were 0.0–10.0 × 10⁻⁶ and 5 × 10⁻⁸ M, respectively.     

Determination of Trace Mercury by Solid Substrate-Room Temperature Phosphorimetry Quenching Method Based on Catalytic Effect of Hg2+on Formation of the Ion Association Complex [Sn(XO)6]4+·[(Fin)4]

A new method for the determination of trace mercury by solid substrate-room temperature phosphorimetry (SS-RTP) quenching method has been established. In glycine-HCl buffer solution, xylenol orange (XO) can react with Sn⁴⁺ to form the complex [Sn(XO)₆]⁴⁺. [Sn(XO)₆]⁴⁺ can interact with Fin⁻ (fluorescein anion) to form the ion associate [Sn(XO)₆]⁴⁺·[(Fin)₄]⁻, which can emit strong and stable room temperature phosphorescence (RTP) on polyamide membrane (PAM). Hg²⁺ can catalyze H₂O₂ oxidizing the ion association complex [Sn(XO)₆]⁴⁺·[(Fin)₄]⁻, which causes the RTP to quench. The ΔIp value is directly proportional to the concentration of Hg²⁺ in the range of 0.016–1.6 fg spot⁻¹ (corresponding concentration: 0.040–4.0 pg ml⁻¹, 0.40 μl spot⁻¹), and the regression equation of working cure is ΔIp=10.03+83.15 m Hg²⁺ (fg spot⁻¹), (r=0.9987, n=6) and the detection limit (LD) is 3.6 ag spot⁻¹(corresponding concentration: 9.0×10^–15 g ml⁻¹, the sample volume: 0.4 μl). This simple, rapid, accurate method is of high selectivity and good repeatability, and it has been successfully applied to the determination of trace mercury in real samples. The reaction mechanism for catalyzing H₂O₂ oxidizing the ion association complex ([Sn(XO)₆]⁴⁺·[(Fin)₄]⁻) SS-RTP quenching method to determine trace mercury is also discussed.     

Synthesis and Analytical Application of a Novel Fluorescent Hg2+ Probe 3′, 6′-Bis(Diethylamino)-2-((2,4-Dimethoxybenzylidene)Amino)Spiro[Isoindoline-1,9′-Xanthene]-3-Thione

A novel probe, 3′,6′ - bis(diethylamino) -2- ((2,4-dimethoxybenzylidene)amino) spiro [isoindoline-1,9′-xanthene]-3-thione (RBS), was designed and synthesized. Its structure was characterized with elemental analysis, IR spectra and ¹H NMR. The probe displayed highly selective and sensitive recognition of Hg²⁺. Reacting with mercury ions in aqueous solution, its fluorescence intensity was enhanced significantly, while its color was changed from colorless to pink. So, a new fluorescence method of detection of Hg²⁺ was proposed. Its dynamic response concentration range and detection limit for Hg²⁺ were 5.00?×?10^?9 M to 1.00?×?10^?6 M detected and 1.83?×?10^?9 M, respectively. Satisfying results were obtained when the probe was applied to detect spiked Hg²⁺ in samples.     

Design and Synthesis of a Terbium(III) Complex-Based Luminescence Probe for Time-Gated Luminescence Detection of Mercury(II) Ions

Time-gated luminescence detection technique using lanthanide complexes as luminescent probes is a useful and highly sensitive method. However, the effective application of this technique is limited by the lack of the target-responsive luminescent lanthanide complexes that can specifically recognize various analytes in aqueous solutions. In this work, a dual-functional ligand that can form a stable complex with Tb³⁺ and specifically recognize Hg²⁺ ions in aqueous solutions, N,N,N ¹ ,N ¹ -{[2,6-bis(3′-aminomethyl-1′-pyrazolyl)-4-[N,N-bis(3″,6″-dithiaoctyl)-aminomethyl]- pyridine]} tetrakis(acetic acid) (BBAPTA), has been designed and synthesized. The luminescence of its Tb³⁺ complex is weak, but can be effectively enhanced upon reaction with Hg²⁺ ions in aqueous solutions. The luminescence response investigations of BBAPTA-Tb³⁺ to various metal ions indicate that the complex has a good luminescence sensing selectivity for Hg²⁺ ions, but not for other metal ions. Thus a highly sensitive time-gated luminescence detection method for Hg²⁺ ions was developed by using BBAPTA-Tb³⁺ as a luminescent probe. The dose-dependent luminescence enhancement of the probe shows a good linearity with a detection limit of 17 nM for Hg²⁺ ions. These results demonstrated the efficacy and advantages of the new Tb³⁺ complex-based luminescence probe for the sensitive and selective detection of Hg²⁺ ions.     

A Highly Sensitive and Selective Fluorescent Chemodosimeter for Hg<Superscript>2+</Superscript> in Neutral Aqueous Solution

A fluorescent assay of Hg²⁺ in neutral aqueous solution was developed using N-[p-(dimethylamino)benzamido]-N′-phenylthiourea (1). 1’s fluorogenic chemodosimetric behaviors towards various metal ions were studied and a high sensitivity as well as selectivity was achieved for Hg²⁺. It was because of a strongly fluorescent 1,3,4-oxadiazoles which was produced by the Hg²⁺ promoted desulfurization reaction. The spectra of ESI mass and IR provided evidences for this reaction. According to fluorescence titration, a good linear relationship ranging from 1.0 × 10⁻⁷ to 2.0 × 10⁻⁵ mol l⁻¹ was obtained with the limit of detection as 3.1 × 10⁻⁸ mol l⁻¹. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Synthesis of Highly Selective Indole-Based Sensors for Mercuric Ion

Two indole-based fluorescent chemosensors 1 and 2 were prepared and investigated characteristic features with transition metal ions. Sensors 1 and 2 were selective for Hg²⁺ ion, among a series of metal ions, in aqueous ethanol (H₂O–EtOH, 1:2, v/v) with association constants of 5.74 × 10³ and 4.46 × 10³ M⁻¹ and detection limits of 7.4 and 6.8 μM, respectively. Computational results revealed that sensor 1 or 2 with Hg²⁺ ion formed 1:1 complex with a central, sandwich-coordinated Hg²⁺ ion. Computational calculations provided evidence that a sandwich-coordinated Hg²⁺ ion center was formed and the polyoxyethylene spacer acted as a scaffold for bringing functional ligands into a suitable geometry.     

A Fluorescence Turn-on Sensor for Hg<Superscript>2+</Superscript> with a Simple Receptor Available in Sulphide-Rich Environments

Detection of Hg²⁺ in complex natural environmental conditions is extremely challenging, and no entirely successful methods currently exist. Here we report an easy-to-prepare fluorescent sensor B3 with 2-aminophenol as Hg²⁺ receptor, which exhibits selective fluorescence enhancement toward Hg²⁺ over other metal ions. Especially, the fluorescence enhancement was unaffected by anions and cations existing in environment and organism. Moreover, B3 can detect Hg²⁺ in sulphide-rich environments without cysteine, S^2- or EDTA altering the fluorescence intensity. Consequently, B3 is capable of distinguishing between safe and toxic levels of Hg²⁺ in more complicated natural water systems with detection limit ≤2 ppb.     

Dual Fluorometric Detection of Fe3+ and Hg2+ Ions in an Aqueous Medium Using Carbon Quantum Dots as a “Turn-off” Fluorescence Sensor

The present study aimed to develop a carbon dots-based fluorescence (FL) sensor that can detect more than one pollutant simultaneously in the same aqueous solution. The carbon dots-based FL sensor has been prepared by employing a facile hydrothermal method using citric acid and ethylenediamine as precursors. The as-synthesized CDs displayed excellent hydrophilicity, good photostability and blue fluorescence under UV light. They have been used as an efficient “turn-off” FL sensor for dual sensing of Fe³⁺ and Hg²⁺ ions in an aqueous medium with high sensitivity and selectivity through a static quenching mechanism. The lowest limit of detection (LOD) for Fe³⁺ and Hg²⁺ ions was found to be 0.406 µM and 0.934 µM, respectively over the concentration range of 0-50 µM. Therefore, the present work provides an effective strategy to monitor the concentration of Fe³⁺ and Hg²⁺ ions simultaneously in an aqueous medium using environment-friendly CDs.

Graphical Abstract

     

Green Chemical Synthesis of N-Cholyl-L-Cysteine Encapsulated Gold Nanoclusters for Fluorometric Detection of Mercury Ions

Herein we report a simple, single-step, cost-effective, environmentally friendly, and biocompatible approach using sodium salt of N-cholyl-L-cysteine (NaCysC) capped gold nanoclusters (AuNCs) with green emission properties at above the CMC in aqueous medium under UV-light irradiation. The primary and secondary CMC of NaCysC was found to be 4.6 and 10.7 mM respectively using pyrene as fluorescent probe. The synthesized AuNCs exhibit strong emission maxima at 520 nm upon excitation at 375 nm with a large Stokes shift of 145 nm. The surface functionality and morphology of NCs are studied by fourier transform infrared spectroscopy, dymanic light scattering studies and transmission electron microscopy. The formation of AuNCs was completed within 5 h and exhibit high stability for more than 6 months. The NaCysC templated AuNCs selectively quenches the Hg²⁺ ions with higher sensitivity in aqueous solution over the other metal ions. The fluorescence analysis of Hg²⁺ showed a wide linear range from 15 to 120 µM and a detection limit was found to be 15 nM.

     

Synthesis and characterization of ZnxHg1?xSeyS1?y quantum dots

This article describes the synthesis of highly water-soluble Zn _x Hg_1−x Se _y S_1−y quantum dots (QDs) in aqueous solution through a simple photo-assisted reaction between ZnSe QDs and mercury(I) nitrate dihydrate [Hg₂(NO₃)₂·2H₂O]. In order to deduce the optimal synthesis conditions, we varied several parameters, including the concentrations of mercaptosuccinic acid (MSA) and Hg₂(NO₃)₂·2H₂O, the illumination time, and the reaction temperature. When irradiated at temperatures below 80 °C, the ZnSe QDs reacted with the S²⁻ ions formed rapidly from MSA and the Hg²⁺ ions formed from Hg₂ ²⁺ ions to form Zn _x Hg_1−x Se _y S_1−y QDs through a process of photo-etching and surface combination. Under different conditions, we prepared a series of Zn _x Hg_1−x Se _y S_1−y QDs that emit fluorescence at the maximum wavelengths ranging from 405 to 760 nm. Inductively coupled plasma-mass spectrometry and transmission electron microscopy/energy dispersive spectrometry revealed that the content of Hg in the Zn _x Hg_1−x Se _y S_1−y QDs was greater when the synthesis was conducted at higher temperature. The Zn_0.88Hg_0.12Se_0.44S_0.56 QDs exhibit improved photostability than crude ZnSe QDs and possess long lifetimes (τ₁ ~ 38 ns and τ₂ ~ 158 ns).     

Detection of <Emphasis Type="Italic">Staphylococcus aureus</Emphasis> Carrying the Gene for Toxic Shock Syndrome Toxin 1 by Quantum-Dot-Probe Complexes

In this study, a high-sensitive and high-specific method to detect the toxic shock syndrome toxin-1 (TSST-1)-producing Staphylococcus aureus was developed based on quantum dot (QD) and oligonucleotide probe complexes. S. aureus carrying tst gene which is responsible for the production of TSST-1 were detected based on fluorescence resonance energy transfer (FRET) occurring between CdSe/ZnS QD donors and black hole quencher (BHQ) acceptors. QD-DNA probe was prepared by conjugating the carboxyl-modified QD and the amino-modified DNA with the EDC. Photoluminescence (PL) quenching was achieved through FRET after the addition of BHQ-DNA which was attached to tst gene probe by match sequence hybridization. The PL recovery was detected in the presence of target DNA by BHQ-DNA detached from QD-DNA probe because of the different affinities. In contrast, mismatch oligonucleotides and DNAs of other bacteria did not contribute to fluorescence intensity recovery, which exhibits the higher selectivity of the biosensor. The experimental results showed clearly that the intensity of recovered QD PL is linear to the concentration of target DNA within the range of 0.2–1.2 μM and the detection limit was 0.2 μM.     

Porous Magnetic Nanoparticles-Based Electrochemical Biosensor for Determination of Mercury in the Aquatic Environment

Fabrication of sensitive and convenient methods for the detection of heavy metal ions is an important task due to their high toxicity to environment and human health. Divalent mercury ions (Hg²⁺) are a kind of significant public health hazard, which generate harmful toxic effects. In this work, a novel self-powered biosensor for the quantification of Hg²⁺ in aqueous solutions is developed. Porous magnetic nanoparticles are synthesized to load electrochemical species and a Hg²⁺ responsive single-stranded DNA probe is used to seal them. After specific interaction with target ions, the DNA probe forms a rigid duplex, which can no longer block the pores of the magnetic nanoparticles. The leakage of electrochemical species can then increase the electrochemical response, which is used to indicate the initial concentration of Hg²⁺. This method shows high sensitivity and selectivity, and can be applied in real water samples with excellent recoveries. Therefore, a novel approach is provided for ultrasensitive and reliable detection of Hg²⁺ in practical applications.     

A New Reactive 1,8-Naphthalimide Derivative for Highly Selective and Sensitive Detection of Hg<Superscript>2+</Superscript>

A 1,8-naphthalimide derivative with a reactive aliphatic hydroxyl was designed and synthesized as a fluorescent probe. Its structure was characterized by IR, ¹H NMR, ¹³C NMR, LC-MS and HPLC. The probe showed high selectivity and sensitivity to Hg²⁺ over other metal ions such as Pb²⁺, Na⁺, K⁺, Cd²⁺, Cr³⁺, Zn²⁺, Cu²⁺, Ni²⁺, Ca²⁺, Fe³⁺, Fe²⁺, Co²⁺, Mn²⁺ and Mg²⁺ in MeCN/H₂O (15/85, v/v). The increase in fluorescence intensity was linearly proportional to the concentration of Hg²⁺ in the range of 18–40 μM with a detection limit of 1.38 × 10^?7 mol/L. The probe could work in a pH span of 4.3–9.0 and respond to Hg²⁺ quickly with strong anti-interference ability. Job’s plot suggested a 1:2 complex of the probe and Hg²⁺.     

A turn-on fluorescent chemosensor for Hg based on phenanthroline fluorophore

Dipyrido[3,2-a:2′,3′-c]-phenazine (L) was employed as a selectively fluorescent chemosensor for Hg²⁺ in DMF solution under buffered conditions with its fluorescence being strongly increased. The fluorescence increasing was attributed to the formation of L–Hg²⁺ by 1:1 complex ratio (K=3.7×10⁵ M⁻¹), which constitutes the basis for the determination of Hg²⁺ with the prepared chemosensor. The experiment results also show that the response behavior of L to Hg²⁺ is pH independent in the range of pH 6.0–9.0 and show excellent sensitivity and selectivity for Hg²⁺ over other examined metal ions.     

An NBD-based Sensitive and Selective Fluorescent Sensor for Copper(II) Ion

A new 7-nitrobenz-2-oxa-1,3-diazole (NBD) derived fluorescent probe (1) exhibiting high selectivity for Cu²⁺ detection, produced significant fluorescence quenching in the presence of Cu²⁺ ion, while the metal ions Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺ and Zn²⁺ produced only minor changes in fluorescence. The apparent association constant (K _a) for Cu²⁺ binding in chemosensor 1 was found to be 1.22 × 10³ M⁻¹. The maximum fluorescence quenching activity caused by Cu²⁺ binding to 1 was observed over the pH range 6–10.     

TiO<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript> nanoparticles synthesized using He/Ar thermal plasma and their effectiveness on low-concentration mercury vapor removal

Oxygen-vacant titanium dioxide (TiO_2−x ) nanoparticles were synthesized using thermal plasma as a heating source at various applied plasma currents and He/Ar ratios. Samples with diverse characteristics were developed and the mercury removal effectiveness was subsequently evaluated. TiO₂ nanoparticles possessing high purity and uniform particle sizes were successfully synthesized using metal titanium and O₂ as precursors and Ar as plasma gas. TiO_2−x in anatase phase with a particle size at 5–10 nm was formed at the He/Ar volume ratio of 25/75. Further increasing the He/Ar ratio elevated the plasma temperature, causing the tungsten to melt, vaporize from the cathode, and then dope into the formed TiO₂ nanoparticles. The doped W appeared to inhibit the growth of nanoparticles and decrease the crystallinity of formed anatase. The effectiveness of oxygen-vacant sites on Hg⁰ removal under the visible light circumstance was confirmed. Hg⁰ removal by the TiO_2−x nanoparticles was enhanced by increasing the O₂ concentration. However, moisture reduced Hg⁰ capture, especially when light irradiation was applied. The reduction in Hg⁰ capture may be resulted from the competitive adsorption of H₂O on the active sites of TiO_2−x with Hg⁰ and transformed Hg²⁺.     

A Coumarin-Based Fluorescent Chemosensor for Zn<Superscript>2+</Superscript> in Aqueous Ethanol Media

A coumarin-based fluorescent chemosensor 1 for Zn²⁺ was designed and synthesized. Compound 1 exhibits lower background fluorescence due to intramolecular photoinduced electron transfer. However, upon mixing with Zn²⁺ in 30% (v/v) aqueous ethanol, a “turn-on” fluorescence emission is observed. The fluorescence emission increases linearly with Zn²⁺ concentration in the range 0.5–10 μmol L⁻¹ with a detection limit of 0.29 μmol L⁻¹. No remarkable emission enhancement was, however, observed for other metal ions. The proposed chemosensor was applied to the determination of Zn²⁺ in water samples with satisfactory results.     

Novel Pyrazoline-Based Selective Fluorescent Sensor for Hg2+

This paper presents the preparation of a pyrazoline compound and the properties of its UV–Vis absorption and fluorescence emission. Moreover, this compound can be used to determine Hg²⁺ ion with selectivity and sensitivity in the EtOH:H₂O?=?9:1 (v/v) solution. This sensor forms a 1:1 complex with Hg²⁺ and shows a fluorescent enhancement with good tolerance of other metal ions. This sensor is very sensitive with fluorometric detection limit of 3.85?×?10^?10 M. In addition, the fluorescent probe has practical application in cells imaging.