远距离环状干涉条纹形成的初步实验

 针对远距离激光干涉成像中条纹的形成进行了研究。分析了成像所需条纹的特点，表明干涉条纹成像系统的带宽决定于条纹的空间带宽。讨论了传统的迈克尔逊干涉仪结构在激光干涉成像中应用的不足之处，并在迈克尔逊干涉仪的基础上，提出一种变形的光路结构，用于在远距离上形成圆对称环状干涉条纹，同时报道了利用该变形结构在约50m的距离上观察到的条纹，表明了该光路结构的可行性。     

耐高温光刻胶光栅模板的制作与转移技术及其应用

作为试件变形传感元件的云纹光栅的制作是云纹干涉法的关键技术。本文提出了在１２０～２００℃高温下使用的光刻胶光栅模板的制作及在此温度下试件栅的复制工艺，并利用此技术研究了新型微电子封装组件在１２５～２０℃温度载荷下的热变形。实验结果表明：采用该方法可以获得高质量的试件栅，云纹条纹质量好，可用于试件微小区域内热变形的精确测量     

干涉条纹自动计数系统的设计与研制

利用集成电路芯片结合光敏晶体管等器件设计并成功制作了一种自动化测量的干涉条纹计数仪器,以实现干涉条纹的自动测量、可逆计数显示等功能。设计方案包括基于光敏晶体管RPM-075PT获取光电信号,以集成电路ST288A准确判别干涉条纹的凹进冒出方向以反映等厚或等倾干涉中光程的变化情况,使用集成电路ICM7217A进行条纹可逆计数。进一步的,使用自带整形滤波功能芯片ST288A以简化方向判别电路及提高抗干扰能力。最后,实验测试结果表明本计数器全面满足干涉条纹的计数要求,可取代人工观测条纹计数,可广泛应用于高校实验、企业检测等应用干涉条纹计数的场景中。     

热光的高阶双缝干涉

干涉效应反映了光场的相干性,非相干光源中无序性会破坏干涉.然而对于高阶干涉来说这一看法并不成立.文章作者最近的理论和实验研究表明,横向传播方向无序的热光源可以实现高阶双缝干涉.尽管单个探测器的强度分布是均匀的,处于不同位置的两个探测器的联合强度关联却出现了干涉条纹.当两个探测器同步反向移动时,条纹间距减小为一阶干涉条纹的一半.实验结果同不久前报道的在自发参量下转换过程中产生的纠缠双光子对的双缝实验中所观察到的亚波长干涉效应十分类似.实验结果可以用多模热光场的二阶空间关联性质来解释.热光的高阶双缝干涉是著名的Hanbury-Brown和Twiss实验的空间干涉版本,因此也可称其为Hanbury-Brown和Twiss型双缝干涉。     

集成光波导干涉芯片的设计及特性研究

运用光波导的模式理论设计了多层集成光波导干涉芯片,对芯片的光波导结构和材料参数进行优化,并制作了集成干涉芯片.借助集成芯片的波导双通道,通过干涉获得了高对比度的远场干涉条纹.在实验误差范围内,当外界环境条件发生微小变化时,干涉条纹发生移动,符合杨氏双缝干涉理论的预期.芯片对水汽、酒精的探测灵敏度约为100ppm,并具有足够的温度稳定性.该集成干涉芯片具有低浓度环境气体检测的应用前景,可为集成高灵敏气体传感器的开发提供发展平台.     

迈克尔逊干涉仪干涉条纹变形的快速校正

本介绍了快速校正迈克尔逊干涉仪干涉条纹变形的两种方法。     

二次波面干涉的剪切散斑干涉计量术

提出了一种新的剪切散斑干涉方法─—二次波面干涉的剪切散斑干涉计量术．这一方法将被测物体变形前后波面的第一次干涉信息分别储存在两张全息干板上，通过光学信息处理实现波面的第二次干涉．两次波面干涉分别消除了位移和位移的一阶导数场对波面位相的影响，得到仅反映位移二阶导数场的条纹图．     

牛顿环实验的新方法

基于最小二乘法原理，直接对牛顿环干涉条纹进行拟合，推导出了透镜曲率半径与拟合方程系数之间的关系，利用干涉条纹数字化方法求出了透镜的曲率半径．由于数据点取在牛顿环的圆周上，克服了传统方法难以对准中心和干涉条纹发生变形时不能保证△（r~2)恒为常量的困难．     

数字散斑干涉术物体形变测量

基于数字散斑干涉术测量物体形变的原理,研究了物体面内位移及变形的测试技术.采用电荷耦合器件记录变形前后的两幅散斑图,取代传统散斑干涉术中的记录干板,省去传统方法中干板显影、定影的繁琐的化学湿处理过程.分别用菲涅尔散斑和像面散斑方法获得散斑干涉图,用相减技术得到含有物体形变信息的散斑干涉条纹.设计高斯低通滤波器,对干涉条纹进行处理,提高了干涉条纹的对比度.提出扫描条纹中心行方法,由条纹中心行一维位相分布获得一维物面变形,实现了散斑干涉条纹的自动判读.试验表明,该方法简洁且实用.     

双曲线等厚干涉条纹的形成及其应用

本文应用薄板纯弯曲理论,导出薄板变形后的中面为鞍形曲面。在变形的透明平板玻璃条中央放一玻璃片巧妙地形成了空气膜,通过干涉装置则能看到平时不多见的双曲线等厚干涉条纹。通过对双曲线干涉条纹两顶点间的距离的测量,可求出相应的     

Comparison of double-pulse digital holography and HPFEM measurements

Pulsed digital holographic interferometry is a widely used technique for measurement of surface deformations. The results are displayed as high-quality images containing the surface deformation represented as a continuous function with high-precision and good resolution. On the theoretical side, the high precision finite-elements method (HPFEM) can be used to compute whole deformation maps of elastic continua, with a resolution comparable to that obtained with digital holographic interferometry. To prove the latter a series of resonant modes from a flat rectangular metal plate obtained with digital holographic interferometry will be compared to the same modes obtained under the same conditions with HPFEM. A very useful measurement concept is reached by combining both methods since they can be performed in parallel and within the same working area.     

高频位相型曲面变形光栅的转移工艺研究

本文研究了在室温和８５℃温度环境下高频位相型曲面变形光栅的转移工艺。实验结果表明：通过这种方法可以复制出高质量的曲表面试件变形栅，并具有灵敏度高、条纹质量好、方法简便、可用于工业现场等优点。为云纹干涉法对曲面变形问题的研究提供了重要的手段。     

Nanoscale deformation measurement by using the hybrid method of gray-level and holographic interferometry

This study extends the use of holographic interferometry to measure the nanoscale out-of-plane displacement with high surface resolution. It is noted that if the deformation is less than half of the optical wavelength, it is hard to find an obvious fringe pattern. Under such a situation, in general, the phase shift method is used. However, it needs to take more than 3 images for phase shifting and phase reconstruction In this paper, a more simple hybrid method of gray-level and holographic interferometry is used to extract fringe skeletons, in which it just needs to take one or two images for the normal deformation measurement directly, even if there exists no obvious fringe pattern. The displacement field with high surface resolution can also be obtained. The proposed method yielded a theoretical precision of 0.15 nm for out-of-plane displacement with a monochromatic CCD camera of 10-bit gray scale (1024 gray scales) sensitivity and microscale surface resolution for millimeter scale object with 640×480 pixels image resolution by an He–Ne LASER (632.8 nm wavelength) light source. The gray-level method is proposed to calculate the non-obvious interferometry fringe by traditional holographic interferometry hologram, and the result showed that this method works for this purpose.     

Thermal fluctuations in viscous cosmology

In this Letter we investigate the power spectrum of thermal fluctuations in very early stage of viscous cosmology. When the state parameter as well as the viscous coefficient of a barotropic fluid is properly chosen, a scale invariant spectrum with large non-Gaussianity can be obtained. In contrast to the results previously obtained in string gas cosmology and holographic cosmology, we find the non-Gaussianity in this context can be k-independent such that it is not suppressed at large scale, which is expected to be testified in future observation.     

Thermal effects in high-power Nd:YAG disk-type solid state laser

An investigation of thermal effects in a high-power Nd:YAG disk-type solid state laser pumped with different pump beam transverse profiles is carried out by numerical simulation based on the finite element method (FEM). Impact of the heat sink on the thermal effects is included in the simulation. The distribution of first principle stress, thermally induced birefringence, including the distribution and variation of the birefringence loss, are studied. The characteristics of the phase variation are analyzed with consideration of the temperature gradient, deformation, strain and thermal stress. Thermal lensing is explored as a function of pump power and of the radius pumped with different pump beam transverse profiles. The non-parabolic part of optical phase distortion is simulated. Furthermore, the characteristics of the bi-focus of the disk laser are also studied. Experiments on the maximum tensile stress distribution and depolarization loss are carried out. The presented calculations are in qualitative agreement with the experimental observations.     

A digital phase-measurement system for real-time holographic interferometry

While holographic interferometry gives a good picture of the stress distribution over a complex structure, its use in stress-analysis has been limited by the fact that quantitative information on the deformation of the surface is directly available only at points on the fringe maxima or minima, and interpolation between these points is slow and not very accurate. An improved phase-measurement system for real-time holographic interferometry is described. This uses a diode array television camera to view the interference pattern, and digital electronics to calculate and store the phase difference at a 100 × 100 grid of points. This permits measurements of the phase with an accuracy estimated at ±2°.     

表面封装技术组件焊点热变形的云纹干涉法研究

表面封装技术组件的焊点作为唯一联接芯片载体与电路板基板之间的机械物，它在温度循环下的可靠性问题是人们普遍关注的焦点。本文通过在组件的不同部位复制１２００线／ｍｍ高频正交全息光栅，采用高灵敏度云纹干涉法测得了翼型引脚首尾两端的面内剪切位移，为阐述表面封装组件的疲劳损伤机理提供了可靠的实验数据。     

Thermal lens measurement technique in end-pumped solid state lasers: Application to diode-pumped microchip lasers

A simple derivation, which relates the thermal lens focal length in solid state lasers to pump power and a method for direct estimation of thermal lens focal length, is reported. This method is applicable to any type of stable resonator. The method is used for the measurement of the thermal lens focal length with an accuracy of 8% in an axially pumped microchip laser. The variation of focal length with pump power is also measured.     

空间光学遥感器大功率控制电箱的热设计

根据空间应用电子设备的热控要求,对空间光学遥感器的控制电箱进行了热控设计。首先,总结了空间电子设备的热设计原则。针对空间光学遥感器控制电箱介绍了相应的热设计流程,对典型的大功率器件进行了温差推算,并说明了电箱的各电路板和大功率元器件的热设计方案。最后,通过热分析和热试验手段对热控电箱的热控方案进行了验证。试验结果表明：控制电箱的整机稳态工况热平衡温度小于30℃,各元器件的最高壳温在54.2℃以内。结果验证了该设计方案完全满足设计指标要求。     

Dynamic material parameters in an anisotropic plate estimated by phase-stepped holographic interferometry

Material parameters in an anisotropic plate are determined using two non-destructive measuring techniques: real-time phase-stepped electronic speckle pattern interferometry and dual-reference-beam pulsed holographic interferometry. The first technique is used to measure the lower modes of vibration of the plate with free-free boundary conditions. Finite element analysis is then used to determine two effective Young's moduli and the in-plane shear modulus. The second technique is used to detect transient bending waves propagating in the plate and acoustic waves propagating in the surrounding air. A double-pulsed laser is used both to generate the waves and to make holographic recordings of the wave fields. The stiffness of the plate is estimated using the measured deformation field and an analytical solution to the plate impact problem.