Microstructure and magnetic properties of colloidal cobalt nano-clusters

The magnetic response of nanometer sized Co nanoparticles (NP) prepared using reverse micelle solutions are presented. The use of complementary structural and morphological probes (like transmission electron microscopy, high resolution electron microscopy, X-ray absorption spectroscopy) allowed to relate the magnetic properties to the size, morphology, composition and atomic structure of the nanoparticles. All data agree on the presence of a core-shell structure of NPs made of a metallic Co core surrounded by a thin Co-oxide layer. The core-shell microstructure of NPs affects its magnetic response mainly raising the anisotropy constant.     

Cobalt metal nanoparticles embedded in SiO2 dielectric layer for the application of nonvolatile memory

Metal–oxide–semiconductor structures (MOS) with the embedded Co nanoparticles (NPs) were efficiently fabricated by utilizing an external laser irradiation technique for the application of nonvolatile memory. Images of high resolution transmission electron microscopy measurements exhibited that the Co NPs of 5 nm in diameter were clearly embedded in SiO₂ gate oxide. Capacitance–voltage measurements certainly exhibited flat-band voltage shift of 2.2 V from 2 V to −8 V in sweeping range. The retention characteristics of MOS capacitors with the embedded Co NPs were also studied as a function of tunnel oxide thickness to confirm the suitability of nonvolatile memory devices with metal NPs. The experimental results reveal that our unique laser process will give possible promise for experimental efficient formation or insertion of metal NPs inside the gate oxide.     

Structural,electrical and magnetic properties of (Fe,Co) co-doped SnO2 diluted magnetic semiconductor nanostructures

Nanostructures (NSs) of basic composition Sn_1−xFe_x/2Co_x/2O₂ with x=0.00, 0.04, 0.06, 0.08 and 0.1 were synthesized by citrate-gel route and characterized to understand their structural, electrical and magnetic properties. X-ray diffraction and Raman spectroscopy were used to confirm the formation of single phase rutile type tetragonal structure. The crystallite sizes calculated by using Williamson Hall were found to decrease with increasing doping level. In addition to the fundamental Raman peaks of rutile SnO₂, the other three weak Raman peaks at about 505, 537 and 688 cm⁻¹ were also observed. Field emission scanning electron microscopy studies showed the emergence of structural transformation. Electric properties such as dc electrical resistivity as a function of temperature and ac conductivity as a function of frequency were also studied. The variation of dielectric properties with frequency reveals that the dispersion is due to Maxwell–Wagner type of interfacial polarization in general. Hysteresis loops were clearly observed in M–H curves of Fe and Co co-doped SnO₂ NSs. However, pure SnO₂ nanoparticles (NPs) showed paramagnetic behaviour which vanished at higher values of magnetic field. The grain and grain boundary contribution in the conduction process is estimated through complex impedance plot fitted with non-linear least square (NLLS) approach which shows that the role of grain boundaries increases rapidly as compared to the grain volume with the increase of Fe and Co ions in to system.     

Magnetic properties of SiO2-coated iron oxide nanoparticles studied by polarized small angle neutron scattering

The structural and magnetic properties of non-coated and SiO₂-coated iron oxide (Fe₃O₄) nanoparticles (NPs) were investigated by a polarized small-angle neutron scattering (P-SANS) method. Measurement of the P-SANS allowed us to obtain nuclear and magnetic scattering cross sections of the NPs under applied magnetic field. The analysis of the scattering intensity provided the structural parameters and the spatial magnetization distribution of the non-coated and the SiO₂ coated core–shell NPs. The measured radius of both NPs and the shell thickness of the core–shell NPs were in consistent with those measured by the transmission electron microscopy. In comparison, the magnetic core radii of both NPs were 0.12–0.6 nm smaller than the nuclear radii, indicating the magnetization reduction in the surface region of core Fe₃O₄ in both NPs. However, the reduced magnetization region, which is the surface spin canting region, of the SiO₂-coated NPs was relatively narrower than that of the non-coated NPs. We suggest that the SiO₂ coating on the Fe₃O₄ NPs may stabilize the spin order of atoms and prohibit the oxidation or defect formation at the surface region of the Fe₃O₄ NPs, and enhance the corresponding magnetization of the Fe₃O₄ NPs by the reduction of the spin canting layer thickness.     

Preparation of magnetic FeCo nanoparticles by coprecipitation route

Magnetic FeCo nanoparticles with high saturation magnetization (M_s = 148 emu/g) at 15 kOe were prepared by a coprecipitation route. The value of M_s for FeCo nanoparticles depends on the ratio of Fe to Co components. The size of the nanoparticles was confirmed by transmission electron microscopy (TEM) images, and morphology of the nanoparticles was obtained by field emission scanning electron microscopy (FE-SEM) images. The crystal structure of the nanoparticles dependent on annealing was characterized by X-ray diffraction data. The magnetic properties were characterized by saturation magnetization from a hysteresis loop by VSM.     

Synthesis and characterization of noscapine loaded magnetic polymeric nanoparticles

The delivery of noscapine therapies directly to the site of the tumor would ultimately allow higher concentrations of the drug to be delivered, and prolong circulation time in vivo to enhance the therapeutic outcome of this drug. Therefore, we sought to design magnetic based polymeric nanoparticles for the site directed delivery of noscapine to invasive tumors. We synthesized Fe₃O₄ nanoparticles with an average size of 10±2.5 nm. These Fe₃O₄ NPs were used to prepare noscapine loaded magnetic polymeric nanoparticles (NMNP) with an average size of 252±6.3 nm. Fourier transform infrared (FT-IR) spectroscopy showed the encapsulation of noscapine on the surface of the polymer matrix. The encapsulation of the Fe₃O₄ NPs on the surface of the polymer was confirmed by elemental analysis. We studied the drug loading efficiency of polylactide acid (PLLA) and poly (l-lactide acid-co-gylocolide) (PLGA) polymeric systems of various molecular weights. Our findings revealed that the molecular weight of the polymer plays a crucial role in the capacity of the drug loading on the polymer surface. Using a constant amount of polymer and Fe₃O₄ NPs, both PLLA and PLGA at lower molecule weights showed higher loading efficiencies for the drug on their surfaces.     

Nanocomposites of magnetic cobalt nanoparticles and cellulose

Polymeric matrices with stabilized metallic nanoparticles constitute an important class of nanostructured materials, because polymer technology allows fabrication of components with various electronic, magnetic and mechanical properties. The porous cellulose matrix has been shown to be a useful support material for platinum, palladium, silver, copper and nickel nanoparticles. In the present study, nanosized cobalt particles with enhanced magnetic properties were made by chemical reduction within a microcrystalline cellulose (MCC) matrix. Two different chemical reducers, NaBH₄ and NaH₂PO₂, were used, and the so-formed nanoparticles were characterized with X-ray absorption spectroscopy, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. These experimental techniques were used to gain insight into the effect of different synthesis routes on structural properties of the nanoparticles. Magnetic properties of the nanoparticles were studied using a vibrating sample magnetometer. Particles made via the NaBH₄ reduction were amorphous Co-B or Co oxide composites with diminished ferromagnetic behaviour and particles made via the NaH₂PO₂ reduction were well-ordered ferromagnetic hcp cobalt nanocrystals.     

Synthesis of monodisperse In2O3 nanoparticles and their d0 ferromagnetism

Monodisperse indium oxide (In₂O₃) nanoparticles (NPs) with the average diameter of 11 nm were prepared by a solvothermal method. The In₂O₃ NPs were characterized by X-ray diffraction, Raman and transmission electron microscopy. The intrinsic nature of ferromagnetism in In₂O₃ NPs has been established with the experimental observation of magnetic hysteresis loop. Photoluminescence and UV–visible studies were employed to evidence the presence of oxygen vacancies and revealed that the oxygen vacancies contribute to the ferromagnetism. The origin of ferromagnetism in In₂O₃ NPs may be due to exchange interactions among localized electron spin moments resulting from oxygen vacancies.     

Thickness-dependent magnetic domain structures of Co ultra-thin film investigated by scanning transmission X-ray microscopy

Thickness-dependent magnetic domain structure of ultrathin Co wedge films (0.3 nm–1.0 nm) sandwiched by Pt layers was investigated by scanning transmission x-ray microscopy (STXM) employing X-ray magnetic circular dichroism (XMCD), utilizing elliptically polarized soft x-rays and electromagnetic fields, with a spatial resolution of 50 nm. The magnetic domain images measured at the Co L₃ edge showed the evolution of the magnetic domain structures from maze-like form to the bubble-like form as the perpendicular magnetic field was applied. The asymmetric domain expansion of a 500 nm-scale bubble domain was also measured when the in-plane and perpendicular external magnetic field were applied simultaneously.     

Sonochemical synthesis and characterization of Co3O4 nanocrystals in the presence of the ionic liquid [EMIM][BF4]

For the first time, a sonochemical process has been used to synthesis cobalt oxide Co₃O₄ nanoflowers and nanorods morphology in the presence of the ionic liquid 1-Ethyl-3-methylimidazolium tetrafluoroborate [EMIM][BF₄] as reaction media and morphology template. Different sonication time periods and different molar ratios of the ionic liquid (IL) were used to investigate their effects on the structural, optical, chemical and magnetic properties of the produced Co₃O₄ nanoparticles. During synthesis process brown powder contains cobalt hydroxide Co(OH)₂ and cobalt oxyhydroxide (Cobalt hydroxide oxide) CoO(OH) was formed, after calcination in air for 4 h at 400 °C a black powder of Co₃O₄ nanoparticles was produced. The produced Co₃O₄ nanoparticles properties were characterized by X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), transmission electron microscopy (TEM), FTIR spectroscopy, UV–vis spectroscopy, and Vibrating Sample Magnetometer (VSM). To explain the formation mechanism of Co₃O₄ NPs some investigations were carried on the brown powder before calcination.     

Rapid oxidation of InP nanoparticles in air

InP nanoparticles (NPs) in the size range of 1.5-3 nm were synthesized using colloidal chemistry methods. Exposure of these NPs to air resulted in rapid oxidation, as shown by transmission electron microscopy. Diffraction and spectroscopic measurements confirmed the formation of In₂O₃. Similar behavior was observed for commercial InP NPs, even when capped with a ZnS shell. Photoluminescence studies suggest that the oxidation occurs even while InP NPs are still dispersed in hexane, albeit at a much slower rate.     

Synthesis,structural, optical,and magnetic properties of Co doped,Sm doped and Co+Sm co-doped ZnS nanoparticles

The compositional, structural, optical and magnetic properties of ZnS, Zn_0.98Co_0.02S, Zn_0.98Sm_0.02S and Zn_0.96Co_0.02Sm_0.02S nanoparticles synthesized by a hydrothermal method are presented and discussed. X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) studies revealed that all the samples exhibited cubic structure without any impurity phases. X-ray photoelectron spectroscopy (XPS) results revealed that the Co and Sm ions existed in +2 and +3 states in these samples. The photoluminescence (PL) spectra of all the samples exhibited a broad emission in the visible region. The room temperature magnetization versus applied magnetic field (M–H) curves demonstrated that the Sm+Co doped nanoparticles exhibited enhanced ferromagnetic behavior compare to Co and Sm individually doped ZnS nanoparticles, which is probably due to the exchange interaction between conductive electrons with local spin polarized electrons on the Co²⁺ or Sm³⁺ ions. This study intensifies the understanding of the novel performances of co-doped ZnS nanoparticles and also provides possibilities to fabricate future spintronic devices.     

Degradation of magnetite nanoparticles in biomimetic media

Magnetic nanoparticles (NPs) of magnetite Fe₃O₄ obtained by coprecipitation (COP), thermal decomposition (DT), and commercial sample (CM) have been degraded in similar conditions to physiological medium at pH 4.7 and in simulated body fluid (SBF) at pH 7.4. The formation of the nanoparticles was confirmed by FTIR spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). In view of medical and environmental applications, the stability of the particles was measured with dynamic light scattering. The degradation processes were followed with atomic absorption spectroscopy (EAA) and TEM. Magnetic measurements were carried out using vibrating sample magnetometry (VSM). Our results revealed that the structural and magnetic properties of the remaining nanoparticles after the degradation process were significantly different to those of the initial suspension. The degradation kinetics is affected by the pH, the coating, and the average particle size of the nanoparticles.     

Synthesis and characterization of superparamagnetic iron oxide nanoparticles for biomedical applications

Monodisperse iron oxide nanoparticles (NPs) of 4 nm were obtained through high-temperature solution phase reaction of iron (III) acetylacetonate with 1, 2-hexadecanediol in the presence of oleic acid and oleylamine. The as-synthesized iron oxide nanoparticles have been characterized by X-ray diffraction, transmission electron microscopy, Mössbauer spectroscopy and magnetic measurements. The species obtained were Fe₃O₄ and/or $\upgamma$ -Fe₂O₃. These NPs are superparamagnetic at room temperature and even though the reduced particle size they show a high saturation magnetization (MS ≈ 90 emu/g).     

Preparation and magnetic properties of anisotropic (Sm,Pr)Co5/Co composite particles

Anisotropic (Sm,Pr)Co₅/Co nanocomposite particles have been fabricated by chemical coating the 2 h ball milled (Sm,Pr)Co₅ flakes with Co nanoparticles. The Co nanoparticles were synthesized with mean particle sizes in the range of 20-50 nm. The nanocomposite particles present [0 0 1] out-of-plane texture and improved magnetic properties, e.g., an enhanced remanent magnetization of 72 emu/g for (Sm,Pr)Co₅/Co and 66 emu/g for (Sm,Pr)Co₅. In addition, by using the 8 h ball milled powders (much smaller than the 2 h ball milled powders) as the starting materials, Co nanoparticles can also be successfully coated on the surface of the flakes. A plausible mechanism for the formation of Co nanoparticles on the surface of (Sm,Pr)Co₅ flakes is discussed.     

The effect of surfactants on the magnetic and optical properties of Co-doped SnO2 nanoparticles

A series of Co-doped SnO₂ nanoparticles have been synthesized by the co-precipitation route. Different amounts of surfactant have been used in order to study the effect of surfactants (CTAB) on the magnetic and optical properties. Structural analyses reveal that Co dopants are substituted into rutile SnO₂ nanoparticles without forming any secondary phase. The increase of the surfactant promotes the adsorption of organic molecules on the surfaces of nanoparticles. Meanwhile, both the ferromagnetism and the orange emission drop progressively. The dependence of ferromagnetic properties on the surfactant concentration could be explained based on the bound magnetic polaron, where the carriers are provided by oxygen vacancies. XANES spectra reveal that the electrons transfer from Co 3d bands to the surfactant ions. Such electron-transfer process suppresses the formation of oxygen vacancies and leads to the decline of the ferromagnetism and optical emission.     

Synthesis and characterization of LSMO manganite-based biocomposite

In this paper we study the structural, morphological and magnetic properties of La_0.67Sr_0.33MnO₃ (LSMO) manganite nanoparticles (NPs) and its biocomposite, obtained by mixing NPs of hydroxyapatite (HA). From the studies of X-ray diffraction and Fourier transmission of infrared spectroscopy it is evident that in the biocomposite sample both the individual phases are distinguishable from each other. The measurements of direct current (DC) magnetization and hysteresis loops reveal that the basic magnetic behaviour of LSMO–HA is similar to that of LSMO; however, the admixture of HA makes the sample magnetically softer. From the investigation of transmission electron microscopy it is observed that such a biocomposite is composed of the NPs of LSMO surrounded by HA particles, which can be found suitable for biomedical applications.     

Influence of synthesis method on structural and magnetic properties of cobalt ferrite nanoparticles

The Co–ferrite nanoparticles having a relatively uniform size distribution around 8 nm were synthesized by three different methods. A simple co-precipitation from aqueous solutions and a co-precipitation in an environment of microemulsions are low temperature methods (50 °C), whereas a thermal decomposition of organo-metallic complexes was performed at elevated temperature of 290 °C. The X-ray diffractometry (XRD) showed spinel structure, and the high-resolution transmission electron microscopy (HRTEM) a good crystallinity of all the nanoparticles. Energy-dispersive X-ray spectroscopy (EDS) showed the composition close to stoichiometric (~CoFe₂O₄) for both co-precipitated nanoparticles, whereas the nanoparticles prepared by the thermal decomposition were Co-deficient (~Co_0.6Fe_2.4O₄). The X-ray absorption near-edge structure (XANES) analysis showed Co valence of 2+ in all the samples, Fe valence 3+ in both co-precipitated samples, but average Fe valence of 2.7+ in the sample synthesized by thermal decomposition. The variations in cation distribution within the spinel lattice were observed by structural refinement of X-ray absorption fine structure (EXAFS). Like the bulk CoFe₂O₄, the nanoparticles synthesized at elevated temperature using thermal decomposition displayed inverse spinel structure with the Co ions occupying predominantly octahedral lattice sites, whereas co-precipitated samples showed considerable proportion of cobalt ions occupying tetrahedral sites (nearly 1/3 for the nanoparticles synthesized by co-precipitation from aqueous solutions and almost 1/4 for the nanoparticles synthesized in microemulsions). Magnetic measurements performed at room temperature and at 10 K were in good agreement with the nanoparticles’ composition and the cation distribution in their structure. The presented study clearly shows that the distribution of the cations within the spinel lattice of the ferrite nanoparticles, and consequently their magnetic properties are strongly affected by the synthesis method used.     

HoF3 and DyF3 Nanoparticles as Contrast Agents for High‐Field Magnetic Resonance Imaging

Clinical contrast agents (CAs) currently used in magnetic resonance imaging (MRI) at low fields are less effective at high magnetic fields. The development of new CAs is mandatory to improve diagnostic capabilities of the new generation of high field MRI scanners. The purpose of this study is to synthesize uniform, water dispersible LnF₃ (Ln = Ho, Dy) nanoparticles (NPs) and to evaluate their relaxivity at high magnetic field (9.4 T) as a function of size and composition. Two different types of HoF₃ NPs are obtained by homogeneous precipitation in ethylene glycol at 120 °C. The use of holmium acetate as holmium precursor leads to rhombus‐like nanoparticles, while smaller, ellipsoid‐like nanoparticles are obtained when nitrate is used as the holmium salt. To explain this behavior, the mechanism of formation of both kinds of particles is analyzed in detail. Likewise, rhombus‐like DyF₃ nanoparticles are prepared following the same method as for the rhombus‐like HoF₃ nanoparticles. We have found, to the best of knowledge, the highest transverse relaxivity values at 9.4 T described in the literature for this kind of CAs. Finally, the LnF₃ NPs have shown negligible cytotoxicity for C6 rat glioma cells for concentrations up to 0.1 mg mL^?1.