Effect of oxygen partial pressure and VO<Subscript>2</Subscript> content on hexagonal WO<Subscript>3</Subscript> thin films synthesized by pulsed laser deposition technique

We report on the effect of oxygen partial pressure and vacuum annealing on structural and optical properties of pulsed laser-deposited nanocrystalline WO₃ thin films. XRD results show the hexagonal phase of deposited WO₃ thin films. The crystallite size was observed to increase with increase in oxygen partial pressure. Vacuum annealing changed the transparent as-deposited WO₃ thin film to deep shade of blue color which increases the optical absorption of the film. The origin of this blue color could be due to the presence of oxygen vacancies associated with tungsten ions in lower oxidation states. In addition, the effects of VO₂ content on structural, electrochemical, and optical properties of (WO₃)_1−x (VO₂) _x nanocomposite thin films have also been systematically investigated. Cyclic voltammogram exhibits a modification with the appearance of an extra cathodic peak for VO₂–WO₃ thin film electrode with higher VO₂ content (x ≥ 0.2). Increase of VO₂ content in (WO₃)_1−x (VO₂) _x films leads to red shift in optical band gap.     

Growth, structural and optical transport properties of nanocrystal Zn1−xCdS thin films deposited by solution growth technique (SGT) for photosensor applications

Solution Growth Technique (SGT) has been used for deposition of Zn_1−xCdS nanocrystalline thin films. Various parameters such as solution pH (10.4), deposition time, concentration of ions, composition and deposition and annealing temperatures have been optimized for the development of device grade thin film. In order to achieve uniformity and adhesiveness of thin film on glass substrate, 5 ml triethanolamine (TEA) have been added in deposition solution. The as-deposited films have been annealed in Rapid Thermal Annealing (RTA) system at various temperature ranges from 100 to 500 °C in air. The changes in structural formation and optical transport phenomena have been studied with annealing temperatures and composition value (x). As-deposited films have two phases of ZnS and CdS, which were confirmed by X-ray diffraction studies; further the X-ray analysis of annealed (380 °C) films indicates that the films have nanocrystalline size (150 nm) and crystal structure depends on the films stoichiometry and annealing temperatures. The Zn_0.4CdS films annealed at 380 °C in air for 5 min have hexagonal structure where as films annealed at 500 °C have represented the oxide phase with hexagonal structure. Optical properties of the films were studied in the wavelength range 350-1000 nm. The optical band gap (E_g=2.94-2.30 eV) decreases with the composition (x) value. The effect of air rapid annealing on the photoresponse has also been observed on Zn_1−xCdS nanocrystal thin films. The Zn_1−xCdS thin film has higher photosensitivity at higher annealing temperatures (380-500 °C), and films also have mixed Zn_1−xCdS/Zn_1−xCdSO phase with larger grain size than the as-deposited and films annealed up to 380 °C. The present results are well agreed with the results of other studies.     

Effect of post annealing temperature on structural and optical properties of ZnCdO thin films deposited by sol–gel method

Ternary ZnCdO thin films oriented along c-axis have been successfully deposited on p-Si (1 0 0) substrates using sol–gel spin coating route. To optimize most suitable annealing temperature for the Zn_1−xCd_xO thin films; these films with selected cadmium content x = 0.10 were treated at annealing temperatures from 300 °C up to 800 °C in oxygen ambient after deposition. The structural and optical properties of deposited thin films have been characterized by X-ray diffraction, energy dispersive spectroscopy, atomic force microscopy, UV–Vis spectroscopy, and photoluminescence spectra. The results show that the obtained films possess high crystallinity with wurtzite structure. The crystallite size, lattice parameters, lattice strain and stress in the deposited films are determined from X-ray diffraction analysis. The band gap energy increased as a function of annealing temperatures as observed from optical reflectance spectra of samples. The presence of Cd in the deposited films is confirmed by energy dispersive spectrum and it is observed that Cd re-evaporate from the lattice with annealing. The photoluminescence measurements as performed at room temperature did not exhibit any luminescence related to oxygen vacancies defects for lower annealing temperatures, as normally displayed by ZnO films. The green yellow luminescence associated to these defects was observed at higher annealing temperatures (≥700 °C).     

Optical properties of PMN–PT thin films prepared using pulsed laser deposition

(1 ? x)Pb(Mg_1/3Nb_2/3)O₃–xPbTiO₃ (PMN–PT) thin films have been deposited on quartz substrates using pulsed laser deposition (PLD). Crystalline microstructure of the deposited PMN–PT thin films has been investigated with X-ray diffraction (XRD). Optical transmission spectroscopy and Raman spectroscopy are used to characterize optical properties of the deposited PMN–PT thin films. The results show that the PMN–PT thin films of perovskite structure have been formed, and the crystalline and optical properties of the PMN–PT thin films can be improved as increasing the annealing temperature to 750 °C, but further increasing the annealing temperature to 950 °C may lead to a degradation of the crystallinity and the optical properties of the PMN–PT thin films. In addition, a weak second harmonic intensity (SHG) has been observed for the PMN–PT thin film formed at the optimum annealing temperature of 750 °C according to Maker fringe method. All these suggest that the annealing temperature has significant effect on the structural and optical properties of the PMN–PT thin films.     

Evolution of SiGe nanoclusters and micro defects in the Si1−xGex layer fabricated by two-step ion implantation and subsequent thermal annealing

The Si_1−xGe_x thin layer is fabricated by two-step Ge ion implantation into (0 0 1) silicon. The embedded SiGe nanoclusters are produced in the Si_1−xGe_x layer upon further annealing. The number and size of the nanoclusters changed due to the Ge diffusion during annealing. Micro defects around the nanoclusters are illustrated. It is revealed that the change of Si-Si phonon mode is causing by the nanoclusters and micro defects.     

Growth, structural and optical properties of CdxZn1−xS thin films deposited using spray pyrolysis technique

Cd_xZn_(1−x)S (x = 0, 0.2, 0.4, 0.6, 0.8, and 1) thin films were deposited by the chemical spray pyrolysis technique using a less used combination of chemicals. Depositions were done at 573 K on cleaned glass substrates. The composition, surface morphology and structural properties of deposited films were studied using EDAX, SEM and X-ray diffraction technique. XRD studies reveal that all the films are crystalline with hexagonal (wurtzite) structure and inclusion of Cd into the structure of ZnS improved the crystallinity of the films. The value of lattice constant ‘a’ and ‘c’ have been observed to vary with composition from 0.382 to 0.415 nm and 0.625 to 0.675 nm, respectively. The band gap of the thin films varied from 3.32 to 2.41 eV as composition varied from x = 0.0–1.0. It was observed that presence of small amount of cadmium results in marked changes in the optical band gap of ZnS.     

Si-nanostructures formation in amorphous silicon nitride SiNx:H deposited by remote PECVD

The formation of silicon nanoclusters embedded in amorphous silicon nitride (SiN_x:H) can be of great interest for optoelectronic devices such as solar cells. Here amorphous SiN_x:H layers have been deposited by remote microwave-assisted chemical vapor deposition at 300 °C substrate temperature and with different ammonia [NH₃]/silane [SiH₄] gas flow ratios (R=0.5−5). Post-thermal annealing was carried out at 700 °C during 30 min to form the silicon nanoclusters. The composition of the layers was determined by Rutherford back scattering (RBS) and elastic recoil detection analysis (ERDA). Fourier transform infrared spectroscopy (FTIR) showed that the densities of SiH (2160 cm⁻¹) and NH (3330 cm⁻¹) molecules are reduced after thermal annealing for SiN:H films deposited at flow gas ratio R>1.5. Breaking the SiH bonding provide Si atoms in excess in the bulk of the layer, which can nucleate and form Si nanostructures. The analysis of the photoluminescence (PL) spectra for different stoichiometric layers showed a strong dependence of the peak characteristics (position, intensity, etc.) on the gas flow ratio. On the other hand, transmission electron microscopy (TEM) analysis proves the presence of silicon nanoclusters embedded in the films deposited at a gas flow ratio of R=2 and annealed at 700 °C (30 min).     

Study of the interface Si-nc/SiO2 by infrared spectroscopic ellipsometry and X-ray photoelectron spectroscopy

SiO_x films (1<x<2), 0.5 μm thick, have been elaborated by electron-gun evaporation. A thermal annealing of these films induced a phase separation leading to the formation of Si nanocrystals embedded in a SiO₂ matrix. These films have been studied by infrared spectroscopic ellipsometry and by X-ray photoelectron spectroscopy (XPS). The effective dielectric function of the thin films has been extracted in the 600–5000 cm⁻¹ range which allowed us to deduce the dielectric function of the matrix surrounding the Si-nc. A study of the Transverse Optical (TO) vibration mode has revealed the presence of SiO_x into the matrix. Before XPS measurements, the films have been etched in fluorhydric acid to remove the superficial SiO₂ layer formed during air exposure. The Si 2p core-level emission has been recorded. The decomposition of the Si 2p peak into contributions of the usual five tetrahedrons Si-(Si_4−nO_n) (n=0–4) has also revealed the presence of a SiO_x phase. Consistency between infra-red and XPS results is discussed.     

Annealing effect on the superconductivity of In2O3–ZnO thin films

We have investigated the relation among ρ–T characteristics, superconductivity, annealing conditions and the crystallinity of polycrystalline (In₂O₃)_1−x–(ZnO)_x films. We annealed as-grown amorphous films in air by changing annealing temperature and time. It is found that the films annealed at 200 °C or 300 °C for a time over 0.5 h shows the superconductivity. Transition temperature T_c and the carrier density n are T_c < 3.3 K and n ≈ 10²⁵–10²⁶ m⁻³, respectively. Investigations for films with x = 0.01 annealed at 200 °C have revealed that the T_c, n and crystallinity depend systematically on annealing time. Further, we consider that there is a suitable annealing time for sharp resistive transition because the transition width becomes wider with longer annealing times. We studied the upper critical magnetic field H_c2(T) for the film with different annealing time. From the slope of dH_c2/dT for all films, we have obtained the resistivity ρ dependence of the coherence length ξ(0) at T = 0 K.     

Synthesis and characterization of nanostructured (Pb1− x Sr x )TiO3 thin films by a modified chemical route

The coating solutions of nanostructured (Pb_{1– x} Sr _x )TiO₃ (PST) thin films have been prepared by the sol–gel combined metallo-organic decomposition method. The coating solutions were deposited on Pt/Ti/SiO₂/Si substrates using a spin-coating technique with spinning speed of 4300 rpm and annealed at 650°C. The effect of Sr content in reducing the grain size and tetragonal distortion of PST films has been studied. The optimum conditions for crystalline phase formation in the films have been analyzed by thermogravimetric, differential thermal analysis and Fourier transform infrared spectroscopy. The phase and microstructure of the films were studied by X-ray diffraction (XRD) and atomic force microscopy (AFM). The XRD pattern shows that the PST thin films are crystallized into tetragonal structures without any impurity phase and the distortion ratio reduces with increasing Sr concentration. The AFM results indicate an increase in grain size with increasing annealing temperature of the film and reduction in grain size with increasing Sr concentration.     

Infrared optical properties of Ba(Zr0.20Ti0.80)O3 and Ba(Zr0.30Ti0.70)O3 thin films prepared by sol-gel method

Ba(Zr_xTi_1−x)O₃ (BZT) (x = 0.20 and 0.30) thin films are deposited on Pt(1 1 1)/Ti/SiO₂/Si(1 0 0) substrate by sol-gel method. X-ray diffraction patterns show that the thin films have a good crystallinity. Optical properties of the films in the wavelength range of 2.5-12 μm are studied by infrared spectroscopic ellipsometry (IRSE). The optical constants of the BZT thin films are determined by fitting the IRSE data using a classical dispersion formula. As the wavelength increases, the refractive index decreases, while the extinction coefficients increase. The effective static ionic charges are derived, which are smaller than that in a purely ionic material for the BZT thin films.     

Structural,electrical and optical properties of boron doped ZnO thin films using LSMCD method at room temperature

Zn_1−x B _x O (0≤x≤0.04) thin films were deposited by the liquid source misted chemical vapor deposition (LSMCD) method. The thin films were polycrystalline with grain sizes of 16 nm to 22 nm. The structural, optical, and electrical properties were investigated by X-ray diffraction, UV-visible spectrophotometry, Raman spectroscopy, and Hall effect measurement. Also scanning electron (SEM) and atomic force microscopy (AFM) techniques were used in order to determine the morphological and topological characteristics of the films. The optimal result of Zn_1−x B _x O films was obtained at x=0.02, with a low resistivity of ≈10⁻² Ω cm, and a high transmittancy of 85% in the visible light spectrum (300 nm ∼ 800 nm).     

Phase transformation of nanostructured titanium dioxide thin films grown by sol–gel method

Nanostructured TiO₂ thin films were deposited on quartz glass at room temperature by sol–gel dip coating method. The effects of annealing temperature between 200^∘C to 1100^∘C were investigated on the structural, morphological, and optical properties of these films. The X-ray diffraction results showed that nanostructured TiO₂ thin film annealed at between 200^∘C to 600^∘C was amorphous transformed into the anatase phase at 700^∘C, and further into rutile phase at 1000^∘C. The crystallite size of TiO₂ thin films was increased with increasing annealing temperature. From atomic force microscopy images it was confirmed that the microstructure of annealed thin films changed from column to nubbly. Besides, surface roughness of the thin films increases from 1.82 to 5.20 nm, and at the same time, average grain size as well grows up from about 39 to 313 nm with increase of the annealing temperature. The transmittance of the thin films annealed at 1000 and 1100^∘C was reduced significantly in the wavelength range of about 300–700 nm due to the change of crystallite phase. Refractive index and optical high dielectric constant of the n-TiO₂ thin films were increased with increasing annealing temperature, and the film thickness and the optical band gap of nanostructured TiO₂ thin films were decreased.     

Effects of annealing time on infrared emissivity of the Pt film grown on Ni alloy

Platinum films were sputter-deposited on polished nickel alloy substrates. The platinum thin films were applied to serve as low-emissivity layers to reflect thermal radiation. The platinum-coated samples were then heated in the air at 600 °C to explore the effects of annealing time on the emissivity of platinum films. The results show that the grain size of the Pt films increased with the increasing annealing time while their dc electrical resistivity decreased. Besides, the IR emissivitiy of the films gradually decreased with the increasing annealing time. Especially, when the annealing time reached 150 h, the average IR emissivity at the wavelength of 3-14 μm was only about 0.1. Moreover, the chemical analysis indicated that the Pt films on Ni-based alloy exhibit a good resistance against oxidation at 600 °C.     

Band gap tunable and improved microstructure characteristics of Cu2ZnSn(S1−x,Sex)4 thin films by annealing under atmosphere containing S and Se

Cu₂ZnSn(S_xS_1?x)₄ (CZTSSe) thin films were prepared by annealing a stacked precursor prepared on Mo coated glass substrates by the sputtering technique. The stacked precursor thin films were prepared from Cu, SnS₂, and ZnS targets at room temperature with stacking orders of Cu/SnS₂/ZnS. The stacked precursor thin films were annealed using a tubular two zone furnace system under a mixed N₂ (95%) + H₂S (5%) + Se vaporization atmosphere at 580 °C for 2 h. The effects of different Se vaporization temperature from 250 °C to 500 °C on the structural, morphological, chemical, and optical properties of the CZTSSe thin films were investigated. X-ray diffraction patterns, Raman spectroscopy, and X-ray photoelectron spectroscopy results showed that the annealed thin films had a single kesterite crystal structure without a secondary phase. The 2θ angle position for the peaks from the (112) plane in the annealed thin films decreased with increasing Se vaporization temperature. Energy dispersive X-ray results showed that the presence of Se in annealed thin films increased from 0 at% to 42.7 at% with increasing Se vaporization temperatures. UV–VIS spectroscopy results showed that the absorption coefficient of all the annealed thin films was over 10⁴ cm^?1 and that the optical band gap energy decreased from 1.5 eV to 1.05 eV with increasing Se vaporization temperature.     

Improved catalytic activity of Pt/rGO counter electrode in In2O3-based DSSC

A platinum/reduced graphene oxide (Pt/rGO) nanocomposite acting as a counter electrode (CE) was fabricated using a chemical bath deposition method for In₂O₃-based dye-sensitized solar cell (DSSC) via sol-gel technique. The report analyzes the morphological and electrochemical impedance spectroscopy of the annealing Pt/rGO films at 350, 400, and 450 °C. Micrograph images obtained from field emission scanning electron microscopy demonstrated the annealed films are highly porous. The energy-dispersive X-ray results show that the carbon atoms were homogeneously distributed on the film annealed at 400 °C. A good photovoltaic performance was exhibited with high photocurrent density of 8.1 mA cm⁻² and power conversion efficiency (η) of 1.68 % at the Pt/rGO CE annealed at 400 °C. The employed electrochemical impedance spectroscopy analysis quantifies that the Pt/rGO films annealed at 400 °C provide more efficient charge transfer with the lowest effective recombination rate and high electron life time, hence improving the performance of Pt/rGO CE.

     

Alloy formation of Co/Ni/Pt(1 1 1)

The initial growth and alloy formation of ultrathin Co films deposited on 1 ML Ni/Pt(1 1 1) were investigated by Auger electron spectroscopy (AES), low energy electron diffraction (LEED), and ultraviolet photoelectron spectroscopy (UPS). A sequence of samples of d_Co Co/1 ML Ni/Pt(1 1 1) (d_Co = 1, 2, and 3 ML) were prepared at room temperature, and then heated up to investigate the diffusion process. The Co and Ni atoms intermix at lower annealing temperature, and Co-Ni intermixing layer diffuses into the Pt substrate to form Ni-Co-Pt alloys at higher annealing temperature. The diffusion temperatures are Co coverage dependent. The evolution of UPS with annealing temperatures also shows the formation of surface alloys. Some interesting LEED patterns of 1 ML Co/1 ML Ni/Pt(1 1 1) show the formation of ordered alloys at different annealing temperature ranges. Further studies in the Curie temperature and concentration analysis, show that the ordered alloys corresponding to different LEED patterns are Ni_xCo_1−xPt and Ni_xCo_1−xPt₃. The relationship between the interface structure and magnetic properties was investigated.     

Effects of post-thermal annealing temperature on the optical and structural properties of gold particles on silicon suboxide films

In this work, silicon suboxide (SiO_x) thin films were deposited using a RF magnetron sputtering system. A thin layer of gold (Au) with a thickness of about 10 nm was sputtered onto the surface of the deposited SiO_x films prior to the thermal annealing process at 400 °C, 600 °C, 800 °C and 1000 °C. The optical and structural properties of the samples were studied using scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR) and optical transmission and reflection spectroscopy. SEM analyses demonstrated that the samples annealed at different temperatures produced different Au particle sizes and shapes. SiO_x nanowires were found in the sample annealed at 1000 °C. Au particles induce the crystallinity of SiO_x thin films in the post-thermal annealing process at different temperatures. These annealed samples produced silicon nanocrystallites with sizes of less than 4 nm, and the Au nanocrystallite sizes were in the range of 7-23 nm. With increased annealing temperature, the bond angle of the Si-O bond increased and the optical energy gap of the thin films decreased. The appearance of broad surface plasmon resonance absorption peaks in the region of 590-740 nm was observed due to the inclusion of Au particles in the samples. The results show that the position and intensity of the surface plasmon resonance peaks can be greatly influenced by the size, shape and distribution of Au particles.     

Optical properties of Cd1−xZnxTe thin films fabricated through sputtering of compound semiconductors

Cd_1−xZn_xTe thin film fabrication is necessary for its photovoltaic and imaging applications in large scale. Thermally annealed and thereby interdiffused r.f. sputtered multilayers comprising of CdTe and ZnTe have been utilized here for the fabrication of Cd_1−xZn_xTe thin films. Photoluminescence and change of resistance of the multilayer under illumination were studied using different annealing temperatures and varying number of repetitions. It was found that three number of repetitions annealed at 300 °C exhibited the best results.     

Visible photoluminescence from silicon nanoclusters embedded in silicon nitride films prepared by remote plasma-enhanced chemical vapor deposition

The photoluminescence (PL) of silicon nanoclusters embedded in silicon nitride films grown by remote plasma-enhanced chemical vapor deposition at 200 °C, using mixtures of SiCl₄/H₂/Ar/NH₃ is investigated. It was found that the color and the intensity of the PL of the as-grown samples depend on the H₂ flow rate, and there is an optimum flow for which a maximum luminescence is obtained. A strong improvement of the PL intensity and change in color was obtained with annealing treatments in the range of 500–1000 °C. The changes in the composition, structure and optical properties of the films, as a function of H₂ flow rate and thermal treatments, were studied by means of Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, ellipsometry and ultraviolet–visible transmission measurements. We conclude that the PL can be attributed to quantum confinement effect in silicon nanoclusters embedded in silicon nitride matrix, which is improved when a better passivation of the nanoclusters surface is obtained.