Temperature-dependent photoluminescence from bicrystalline ZnS (core/shell) nanocables

The experimental study of the temperature-dependent photoluminescence properties of bicrystalline ZnS core/shell nanocables under 10 K to 300 K was reported. The results show that there are two distinct peaks situated at the UV (about 372.6 nm) and green (about 500 nm) regions, respectively, and one blue-shoulder band (about 465 nm) superimposed between them for all spectra. The UV peak shows an obvious redshift with increasing temperature. The analyses of Gaussian-fitted the blue-shoulder band and the green bands from 10 K to 300 K reveal that all spectra can be well fitted by three Gaussian peaks: blue peak (B, about 2.67 eV), two green peaks (G1, about 2.47 eV and G2, about 2.42 eV). With increasing temperature, the blue band shows blueshift. The green bands show anomalous transition: green band G1 shows blueshift-redshift transition and green band G2 shows redshift-blueshift. The origins of these bands and their temperature-dependent shifts are explained based on defect levels and strong carrier localization effect at the defect levels in addition to band-gap shrinkage.     

Preparation and characterization of CdS/Si coaxial nanowires

CdS/Si coaxial nanowires were fabricated via a simple one-step thermal evaporation of CdS powder in mass scale. Their crystallinities, general morphologies and detailed microstructures were characterized by using X-ray diffraction, scanning electron microscope, transmission electron microscope and Raman spectra. The CdS core crystallizes in a hexagonal wurtzite structure with lattice constants of a=0.4140 nm and c=0.6719 nm, and the Si shell is amorphous. Five Raman peaks from the CdS core were observed. They are 1LO at 305 cm⁻¹, 2LO at 601 cm⁻¹, A₁-TO at 212 cm⁻¹, E₁-TO at 234 cm⁻¹, and E₂ at 252 cm⁻¹. Photoluminescence measurements show that the nanowires have two emission bands around 510 and 590 nm, which originate from the intrinsic transitions of CdS cores and the amorphous Si shells, respectively.     

The structure and photoluminescence properties of TiO<Subscript>2</Subscript>-coated ZnS nanowires

The structure and photoluminescence properties of TiO₂-coated ZnS nanowires were investigated. ZnS nanowires were synthesized by thermal evaporation of ZnS powder and then coated with TiO₂ by using the metal organic chemical vapor deposition (MOCVD) technique. We performed scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy, and photoluminescence (PL) spectroscopy to characterize the as-synthesized and TiO₂-coated ZnS nanowires. TEM and XRD analyses revealed that the ZnS core and the TiO₂ coatings had crystalline zinc blende and crystalline anatase structures, respectively. PL measurement at room temperature showed that the as-synthesized ZnS nanowires had two emissions: a blue emission centered in the range from 430 to 440 nm and a green emission at around 515 nm. The green emission was found to be dominant in the ZnS nanowires coated with TiO₂ by MOCVD at 350°C for one or more hours, while the blue emission was dominant in the as-synthesized ZnS nanowires. Also the mechanisms of the emissions were discussed.     

Auger and photoluminescence analysis of ZnO nanowires grown on AlN thin film

ZnO nanowires were grown on AlN thin film deposited on the glass substrates using a physical vapor deposition method in a conventional tube furnace without introducing any catalysts. The temperature of the substrates was maintained between 500 and 600 °C during the growth process. The typical average diameters of the obtained nanowires on substrate at 600 and 500 °C were about 57 and 22 nm respectively with several micrometers in length. X-ray diffraction and Auger spectroscopy results showed Al diffused from AlN thin film into the ZnO nanowires for the sample grown at 600 °C. Photoluminescence of the nanowires exhibits appearance of two emission bands, one related to ultraviolet emission with a strong peak at 380-382 nm, and the other related to deep level emission with a weak peak at 503-505 nm. The ultraviolet peak of the nanowires grown at 500 °C was blue shifted by 2 nm compared to those grown at 600 °C. This shift could be attributed to surface effect.     

Effect of annealing treatment on luminescence property of MgO nanowires

Magnesium oxide nanowires (NWs) were synthesized by a current heating process. The effect of annealing treatment in air on their structural and optical characteristics was investigated. As-grown NWs in diameter ranging from 30 to 70 nm and length up to several 10 μm were obtained. Carbon-coating layers were observed in the as-grown NWs which were oxidized during the annealing treatment at high temperature. Ionoluminescence spectra of the as-grown and annealed NWs have showed two emission peaks centered at 360 nm (UV emission) and 492 nm (green emission). The intensities of green emission were maximum at the annealing temperature of 650 °C for 2 h, whereas those of UV emission were decreased with increasing the annealing temperature. It is anticipated that maximum green emission correlates to the sufficient density of oxygen vacancies which was occurred by the optimum annealing parameters of both temperature and time.     

Optical properties of Tm-doped GaSe single crystals

Optical properties of Tm-doped GaSe single crystals were investigated by measurements of optical absorption and photoluminescence. The single crystals were grown by the Bridgman technique. The X-ray diffraction analysis revealed that the single crystals were in the ε-type GaSe phase. The optical absorption spectra showed a sharp absorption peak at 582 nm near the band edge, which is due to direct free exciton. The temperature dependence of the energy of the exciton absorption peak was well fitted by the Varshni relation. In the photoluminescence spectrum at 10 K, we observed a very weak emission peak at 586 nm, a relatively strong emission peak centered at 613 nm, and several sharp and narrow emission peaks in the 790-840 nm region. The two emission peaks at 586 and 613 nm were associated with intrinsic emission lines due to direct free exciton and indirect bound exciton. The emission peaks in the 790-840 nm region, which were related to extrinsic emission, were assigned as due to the ³F₄→³H₆ transition of Tm³⁺ ions with a low symmetry of D₃ in the host lattice.     

Enhanced Upconversion Luminescence of Erbium–Nitrogen-Doped Zinc Oxide Nano-Wires by Implantation of Ytterbium Ions

Erbium–nitrogen codoped zinc oxide nanowires of ytterbium-doped are prepared by thermal evaporation and ion implantation methods. Ytterbium ions are doped into nanowires at a fluence of (0, 1, 3, 5, and 9) × 10¹⁵ cm^?2. Microstructural and optical properties of specimen are investigated by X-ray diffractometer, absorption spectra, Raman, and upconversion photoluminescence examinations. Upconversion photoluminescence emissions at 550 nm and 660 nm are obtained under 980-nm light excitation. Both intensities of green and red peaks are enhanced by the introduction of ytterbium ions. When ytterbium ion fluence is 5 × 10¹⁵ cm^?2, light emission intensity reaches maximum value. The energy transfer and cross-relaxation processes are responsible for the change of emission intensity.     

Current--voltage characteristics of an individual helical CdS nanowire rope

This paper studies the electronic transport in an individual helically twisted CdS nanowire rope, on which platinum microleads are attached by focused-ion beam deposition. The current-voltage （I - V） characteristics are nonlinear from 300 down to 60 K. Some step-like structures in the I - V curves and oscillation peaks in the differential conductance （dI/dV - V） curves have been observed even at room temperature. It proposes that the observed behaviour can be attributed to Coulomb-blockade transport in the one-dimensional CdS nanowires with diameters of 6-10 nm.     

Aligned growth of ZnO nanowires by NAPLD and their optical characterizations

Not only vertically aligned ZnO nanowires but also horizontally aligned ZnO nanowires have been successfully grown on the annealed (0 0 0 1) c-cut and (1 1 2 0) a-cut sapphire substrates, respectively using catalyst-free nanoparticle-assisted pulsed-laser ablation deposition (NAPLD). The as-synthesized ZnO nanowires exhibit an ultraviolet emission at around 390 nm and the absent green emission under room temperature. The single ZnO nanowire was collected in the electrode gap by dielectrophoresis (DEP). Under the optical pumping, the single ZnO nanowire exhibited UV emission at around 390 nm with several sharp peaks whose energy spacings are almost constant, which greatly differs from the broad UV emission of the film with many nanowires, suggesting ZnO nanowires as candidates for laser media. The single ZnO nanowire showed polarized photoluminescence (PL). The as-synthesized ZnO nanowires could find many interesting applications in short-wavelength light-emitting diode (LED), laser diode and gas sensor.     

Color tunability of nanophosphors by changing cations for solid-state lighting

X₃MgSi₂O₈: Eu²⁺, Mn²⁺ (X=Ba, Sr, Ca) phosphors with the mean particle size of 200 nm and the spherical shape are synthesized through combustion method. They show three emission colors under near-ultraviolet light: the blue and green colors from Eu²⁺ ions and the red color from Mn²⁺ ions. Three emission bands show the different emission colors with changing X²⁺ cations. These color shifts are discussed in terms of two competing factors of the crystal field strength and the covalency. These phosphors with maximum excitation of around 375 nm can be applied as color-tunable phosphors for white-light-emitting diode based on ultraviolet/phosphor technology.     

Ag nanoparticle mediated growth of CdS nanobelts

Catalytic growth of CdS have been carried out on large scale by evaporation of bulk CdS on Ag deposited Si (1 1 1) at atmospheric pressure. The as prepared CdS had wurtzite structure as evidenced by X-ray diffraction. The nanostructures were beltlike with several tens of micrometers length, several micrometers width and few nanometers to tens of nanometers thick as seen by scanning electron microscope and confirmed by TEM studies. The nanobelts were single crystalline in nature and showed reflection corresponding to (1 1 2) and (0 0 2) planes in SAED. The PL studies revealed the green band due to band gap emission and red band due to emission from the surface states. The higher intensity of the defect emission indicated the presence of considerable concentration of surface defects in the as prepared sample. The deposition of CdS could be explained on the basis of catalyst assisted vapor-liquid-solid and vapor-solid mechanism.     

Upconversion luminescence in Er-doped germanate-oxyfluoride and tellurium-germanate-oxyfluoride transparent glass-ceramics

Upconversion luminescence has been studied for Er³⁺ in a germanate-oxyfluoride and a tellurium-germanate-oxyfluoride transparent glass-ceramic using 800 nm excitation. Significantly increased upconversion luminescence was observed from transparent glass-ceramics compared with that from their corresponding as-prepared glasses. In addition to a strong green emission centered at 545 nm from ⁴S_3/2 state and a weaker red emission centered at 662 nm from ⁴F_9/2 state generally seen from Er³⁺-doped glasses, a violet emission centered at 410 nm from ²H_9/2 state and a near-ultra-violet emission centered at 379 nm from ⁴G_11/2 state were also observed from transparent glass-ceramics. The upconversion luminescence of Er³⁺ ions in transparent glass-ceramics revealed sharp Stark-splitting peaks generally seen in a crystal host. The increased upconversion efficiency is attributed to the decreased effective phonon energy and the increased energy transfer between excited ions when Er³⁺ ions were incorporated into the precipitated β-PbF₂ nanocrystals.     

Influence of annealing temperature on the photoluminescence properties of ZnO quantum dots

The properties of ZnO quantum dots (QDs) synthesized by the sol-gel process are reported. The primary focus is on investigating the origin of the visible emission from ZnO QDs by the annealing process. The X-ray diffraction results show that ZnO QDs have hexagonal wurtzite structure and the QD diameter estimated from Debye-Scherrer formula is 8.9 nm, which has a good agreement with the results from transmission electron microscopy images and the theoretical calculation based on the Potential Morphing Method. The room-temperature photoluminescence spectra reveal that the ultraviolet excitation band has a red shift. Meanwhile, the main band of the visible emission shifts to the green luminescence band from the yellow luminescence one with the increase of the annealing temperature. A lot of oxygen atoms enter into Zn vacancies and form oxygen antisites with increasing temperature. That is probably the reason for the change of the visible emission band.     

Photoluminescence excitation properties of porous silicon with and without Er-Yb-containing complex

Two bands in the photoluminescence excitation spectra have been studied for the red, blue, and IR emission of oxidized porous silicon (PS) and PS with Er³⁺- and Yb³⁺-containing gadolinium oxychloride complex (PS:Er,Yb), introduced by thermal diffusion. These two spectral bands were shown to reflect contributions of two different mechanisms of excitation-emission processes. The UV band for the IR emission of PS:Er,Yb rose sharply at about 290 nm and was explained by the direct photoemission of carriers from the valence band of Si crystallites into the conduction band of the oxide shell. The second band was found to be common for the red and blue emission and assosiated with the carriers photoexcitation inside the Si crystallites. Lifetimes for both bands were measured and the structure of the blue emission from PS:Er,Yb with peaks at 416, 440, 466, and 500 nm from PS:Er,Yb was observed.     

Y掺杂Si纳米线的光致发光特性

以n型单晶Si(111)为衬底,利用Au作为催化剂,在温度、N₂流量和生长时间分别为1 100 ℃,1.5 L·min-1和60 min的条件下,基于固-液-固生长机制,生长了直径为60～80 nm、长度为数十微米的高密度Si纳米线。随后,以Y₂O₃粉末为掺杂源,采用高温扩散方法对Si纳米线进行了钇(Y)掺杂。利用扫描电子显微镜、X射线衍射仪和荧光分光光度计对不同掺杂温度(900～1 200 ℃)、掺杂时间(15～60 min)和N₂流量(0～400 sccm)等工艺条件下制备的Y掺杂Si纳米线的形貌、成分、结晶取向以及激发光谱和发射光谱特性进行了详细的测量和表征。结果表明,在掺杂温度为1 100 ℃,N₂流量为200 sccm、掺杂时间为30 min和激发波长为214 nm时,Y掺杂Si纳米线样品表现出较好的发光特性。样品分别在470～500和560～600 nm范围内出现了两条发光谱带。560～600 nm的发光带由两个发光峰组成,峰位分别为573.6和583.8 nm,通过结构分析可以推测,这两个发光峰是由Y3+在Si纳米线的带隙中引入的杂质能级引起的。而470～500 nm较宽的发光带同样来源于Y离子在Si纳米线带隙中引入的与非晶SiO_x壳层中氧空位能级十分接近的杂质能级。     

Growth and spectral characterization of β-Ga2O3 single crystals

Beta gallium oxide (β-Ga₂O₃) single crystals were grown by the floating zone technique. The absorption spectra and the luminescence of the crystals were measured. The absorption spectra showed an intrinsic short cutoff edge around 260 nm with two shoulders at 270 and 300 nm. Not only the characteristic UV (395 nm), blue (471 nm) and green (559 nm) lights, but also the red (692 nm) light can be seen in the emission spectra. The deep UV light was attributed to the existing of quantum wells above the valence band and the red light was owed to the electron-hole recombination via the vicinity donors and acceptors.     

Studies of luminescence properties of ZnO and ZnO:Zn nanorods prepared by solution growth technique

Pyramidal ZnO nanorods with hexagonal structure having c-axis preferred orientation are grown over large area silica substrates by a simple aqueous solution growth technique. The as-grown nanorods were studied using XRD, SEM and UV-vis photoluminescence (PL) spectroscopy for their structural, morphological and optical properties, respectively. Further, the samples have also been annealed under different atmospheric conditions (air, O₂, N₂ and Zn) to study the defect formation in nanorods. The PL spectra of the as-grown nanorods show narrow-band excitonic emission at 3.03 eV and a broad-band deep-level emission (DLE) related to the defect centers at 2.24 eV. After some mild air annealing at 200 °C, fine structures with peaks having energy separation of ∼100 meV were observed in the DLE band and the same have been attributed to the longitudinal optical (LO) phonon-assisted transitions. However, the annealing of the samples under mild reducing atmospheres of N₂ or zinc at 550 °C resulted in significant modifications in the DLE band wherein high intensity green emission with two closely spaced peaks with maxima at 2.5 and 2.7 eV were observed which have been attributed to the V_O and Zn_i defect centers, respectively. The V-I characteristic of the ZnO:Zn nanorods shows enhancement in n-type conductivity compared to other samples. The studies thus suggest that the green emitting ZnO:Zn nanorods can be used as low voltage field emission display (FED) phosphors with nanometer scale resolution.     

Multiphoton route to ZnO nanowire lasers

With intense femtosecond laser excitation, multiphoton absorption-induced stimulated emission and laser emission in ZnO bulk crystal and nanowires have been demonstrated at room temperature. UV-stimulated emission peaks appeared in both bulk crystal and nanowires when the excitation exceeded certain thresholds, and a sharp lasing peak with a linewidth of ~0.5 nm was observed from ZnO nanowires. The emission properties were attributed to the band-edge emission of the recombination of carriers excited by two- and three-photon absorption processes in the wide-bandgap semiconductor.     

五边形截面的Ag纳米线局域表面等离子体共振模式

五边形截面的单晶Ag纳米线对ZnO量子点荧光具有增强的现象. 为解释这一现象, 利用时域有限差分法对五边形截面的Ag纳米线的局域表面等离子体共振模式进行了理论模拟. 结果表明, 五边形截面的Ag纳米线在紫外区域存在两个消光峰, 分别由Ag纳米线的横向偶极共振(340 nm)和四极共振(375 nm)引起; 这两个消光峰与ZnO量子点荧光增强峰相一致, 而且随着Ag纳米线的半径增大而红移; 消光峰对应的共振模式取决于Ag纳米线的截面形状; 根据Ag纳米线电场增强倍数与激发光波长变化关系曲线可知, 最大增强电场位于五边形截面的顶点处, 而边线处电场增强较小. 理论模拟的结果较好地解释了Ag纳米线/ZnO量子点体系的荧光增强现象, 也为Ag纳米线在提高半导体材料发光效率、生物探测等方面的应用提供有益的参考.     

Tb掺杂Si纳米线的光致发光特性

以金属Au-Al为催化剂,在温度为1 100 ℃,N₂气流量为1 500 sccm、生长时间为30 min,从Si(100)衬底上直接生长了直径约为50～120 nm、长度为数百纳米的高密度、大面积的Si纳米线。然后,利用Tb₂O₃在不同温度(1 000～1 200 ℃)、掺杂时间(30～90 min)和N₂气流量(0～1 000 sccm)等工艺条件下对Si纳米线进行了Tb掺杂。最后,对Si(100)衬底进行了Tb掺杂对比。室温下,利用荧光分光光度计(Hitachi F-4600) 测试了Tb掺杂Si纳米线的光致发光特性。实验研究了不同掺杂工艺参数(温度、时间和N₂气流量)对Tb3+绿光发射的影响。根据Tb3+能级结构和跃迁特性对样品的发射光谱进行了分析。结果表明,在温度为1 100 ℃,N₂气流量为1 500 sccm、时间为30 min等条件下制备的Si纳米线为掺杂基质,Tb掺杂温度为1 100 ℃,N₂气流量为1 000 sccm、光激发波长为243 nm时,获得了最强荧光发射,其波长为554 nm(5D₄→7F₅),同时还出现强度相对较弱的494 nm(5D₄→7F₆),593 nm(5D₄→7F₄)和628 nm(5D₄→7F₃)三条谱带。Tb掺杂的体Si衬底在波长554 nm处仅有极其微弱的光致发光峰。