Modifications of roughness and wettability properties of metals induced by femtosecond laser treatment

Topographic and wetting properties of AISI 316L stainless steel and Ti-6Al-V alloys were modified via linearly polarized femtosecond laser pulse irradiation. In order to induce a gradual evolution of the surface topography and wettability, four samples of each alloy were irradiated with different number of pulses. From the topographic point of view, a multi-scale morphology made of nano- and micro-periodic ripples was induced. The increase in the number of pulses led to the appearance of a third scale structure of waviness that is due to the laser scanning. The wettability of alloys was changed from a hydrophilic behavior to a hydrophobic one without lowering surface energies by chemical coatings. The apparent contact angle (CA) increased with increasing the number of pulses. A rise of about 50° of the apparent CA of the Ti-6Al-V was noticed.     

高电荷态氙离子辐照下的6H碳化硅表面纳米结构变形（英）

高电荷态离子比普通的离子携带较高的势能,势能在材料表面的瞬间释放,能在材料表面形成nm量级的结构损伤。它在纳米刻蚀、小型纳米器件、纳米材料、超小尺寸半导体芯片制作、固体表面处理和固体结构分析等领域具有广泛应用前景。因此对高电荷态重离子（Xeq+）引起半导体材料表面（6H-SiC）纳米结构变形进行了研究。采用Xe18+和Xe26+离子,选取从11014到51015 ionscm-2逐渐递增的剂量,以垂直和倾斜60角两种入射方式辐照6H-SiC薄膜样品, 经原子力显微镜分析表明,辐照后的表面肿胀凸起。对于Xe18+离子辐照的样品,辐照区至未辐照区边界的台阶高度随离子剂量增加而连续增大,而对于Xe26+离子辐照的样品则先增加而后减小。在相同入射角和剂量条件下,Xe26+离子辐照样品形成的台阶高度大于Xe18+离子辐照形成的台阶高度,在相同离子和剂量的条件下,垂直照射时形成的台阶高度大于倾斜照射时形成的台阶高度。根据损伤机理和实验数据,首次初步建立了一个包括势能、电荷态、入射角和剂量等物理量的理论模型来预测高电荷态离子在半导体材料表面形成的纳米结构变形。暗示了高电荷态离子的潜在的应用价值及进一步研究的必要性。     

Features of the pattern formed on a ferrite-garnet surface under swift-energy Ar+-ion irradiation

The topography of a ferrite-garnet surface irradiated with swift-energy Ar⁺ ions is studied. It is shown that the ion-beam incidence angle is the main parameter determining the features of the pattern. It is revealed that a ripple structure with crests perpendicular to the beam projection turns into a structure with crests oriented along the beam projection with increasing incidence angle. The angle at which the pattern appears and the angle of the transition from one form of the pattern to the other differ from that calculated by the Bradley-Harper theory. The transition of the ripple structure with crests along the beam projection to that oriented perpendicular to the beam direction is observed upon irradiation near the critical angle with increasing irradiation dose.     

Surface modifications of PADC polymeric material by ion beam bombardment for high technology applications

Surface modification of Poly (allyl diglycol carbonate) (PADC) is induced by 150 keV Ag ions of different fluences. The pristine as well as bombarded samples were investigated by UV–Vis spectroscopy, Fourier transform-infrared analysis (FTIR) and micro-hardness tester. The variations of wettability and surface free energy were determined by the contact angle measurements. The obtained results showed that ion beam bombardment induced increase in the absorption spectra of the UV–Vis with increase of ion fluence as well. The direct and indirect optical band gap decreased from 4.2 to 3.6 eV for pristine sample to 3.2 and 2.5 eV for those bombarded with Ag ion beam at the highest fluence, respectively. Changes in chemical properties were observed by Fourier transform infrared spectroscopy. Increase in the wettability, surface free energy and work of adhesion with increase the ion fluence were observed. Ion bombardment inducing increasing in a micro-hardness surface due to the high carbon surface concentration and cross-linking effects in the polymeric chains. The bombarded PADC surfaces may find special applications to the field of the micro-electronic devices and printing process.     

EPR and UV spectrometry investigation of sucrose irradiated with carbon particles

Solid state/EPR (SS/EPR) dosimeters of carbon ions irradiated sucrose are studied with EPR, and their water solutions – with UV spectroscopy. Doses between 20 and 200 Gy are used with linear energy transfer (LET) values for carbon ions of 63, 77, 96 and 230 keV μm^?1. After irradiation all samples show typical for irradiated sucrose EPR and UV spectra. The obtained data are compared with those previously reported for nitrogen particles and gamma rays irradiated sucrose. The identical shape of both the EPR and UV spectra of irradiated with various type radiation samples suggests that generated free radicals are not influenced by the nature of radiation. The lack of difference in the line width of the separate lines or the whole EPR spectrum, obtained for gamma and heavy particles irradiation, suggests negligible spin–spin interaction among the radiation-generated free radicals in the samples. The linear dependence of the EPR response on the absorbed dose radiation is found to be higher when generated by gamma rays, than by the same absorbed dose of heavy particles. In addition, the EPR response for carbon ions is higher than that for nitrogen ions. Water solutions of irradiated sucrose exhibit UV spectrum with absorption maximum at 267 nm, attributed to the recombination products of free radicals. The UV band intensity depends on the absorbed dose radiation. The UV spectra obtained for carbon, nitrogen and gamma rays irradiated sucrose are also compared.     

Ultraviolet irradiation induced changes in the surface of phenolphthalein poly(ether sulfone) film

Changes in surface characteristics of phenolphthalein poly(ether sulfone) (PES-C) film induced by ultraviolet (UV) irradiation were investigated. The surface properties of the pristine and irradiated films were studied by attenuated total-reflection FTIR (FTIR-ATR), X-ray photoelectron spectroscopy (XPS), contact angle measurements and atomic force microscopy (AFM). It was found that photooxidation degradation took place on the sample surface after irradiation and the oxygen content in the surface increased as evidenced by FTIR-ATR and XPS results. The water contact angle of the irradiated films decreased with increasing irradiation time, which was ascribed to the increased polarity of the surface induced by photooxidation. The etching of ultraviolet irradiation induced the roughening of PES-C surface after irradiation with its root-mean-square roughness (RMS) determined by AFM increased from 2.097 nm before irradiation to 7.403 nm in the area of 25 μm × 25 μm.     

Excimer laser-assisted chemical process for formation of hydrophobic surface of Si (001)

Silicon (Si) wettability is one of the important parameters in the development of Si-based biosensing and lab-on-chip devices. We report on UV laser induced hydrophobicity of Si (001) wafers immersed in methanol during the irradiation with an ArF excimer laser. The irradiation with 800 pulses of the laser operating at 65 mJ/cm² allowed to significantly increase the hydrophobicity of investigated samples as characterized by the static contact angle change from 77° to 103°. Owing to the irradiation with relatively low laser fluence, no measurable change in surface morphology of the irradiated samples has been observed with atomic force microscopy measurements. The nature of the hydrophobic surface of investigated samples is consistent with X-ray photoelectron spectroscopy analysis that indicates formation of Si–O–CH₃ bonds on the surface of the laser-irradiated material.     

Surface characteristics of UV-irradiated polyurethane elastomers extended with α, ω-alkane diols

Polyurethane elastomers (PUEs) based on 4,4′-diphenylmethane diisocyanate (MDI), poly (?-caprolactone) (PCL) and extended with series of chain extender (CE) were synthesized via two step polymerization technique. The synthesized samples were irradiated for 50, 100 and 200 h in an UV exposure unit as such the spectral distribution of the light is good match for terrestrial solar radiation. The modifications in the chemical structures of the PU before and after irradiation were characterized using Fourier transform infrared (FT-IR) technique. The effect of irradiation time and chain extenders length on surface properties were studied and investigated. Photo-oxidation of PU surface leads to fast increase in surface free energy and its polar component. Simultaneously, the work of water adhesion to polymer increases significantly during UV-irradiation. The higher changes in surface properties, observed by water absorption (%), equilibrium degree of swelling, as well as monitored by ATR-FT-IR and contact angle measurement, were found for the PU samples extended with higher number of methylene unit and irradiation time.     

Evaluation of Argon ion irradiation hardening of ferritic/martensitic steel-T91 using nanoindentation,X-ray diffraction and TEM techniques

In the present study, microstructures of Ferritic-martensitic T-91 steel irradiated at room temperature for 5, 10 and 20?dpa using 315?KeV Ar⁺⁹ ions have been characterized by grazing incident X-ray diffraction (GIXRD) and by transmission electron microscopy (TEM). Line profiles of GIXRD patterns have shown that the size of domain continuously reduced with increasing dose of radiation. TEM investigations of irradiated samples have shown the presence of black dots, the number density of which decreases with increasing dose. Microstructures of irradiated samples have also revealed the presence of point defect clusters, such as dislocation loops and bubbles. In addition, dissolution of precipitates due to irradiation was also observed. Nano-indentation studies on the irradiated samples have shown saturation behavior in hardness as a function of dose which could be correlated with the changes in the yield strength of the alloy.     

Morphological and micro-Raman investigations on Ar-ion irradiated nanostructured GaAs surface

Low energy Ar⁺-ion irradiation at normal incidence is used to fabricate nanostructured GaAs surface. Atomic force microscopy (AFM) images reveal the formation of GaAs surface nanodots with an average size of about 25-35 nm. The swelling of irradiated surface is observed at a higher energy due to the ion beam-induced porosity in the amorphized GaAs surface. Micro-Raman scattering shows a gradual increase in the downward shift and line shape broadening of optical phonon modes from the nanostructured GaAs prepared with increasing ion dose and beam energy. The rapid broadening of the transverse-optical phonon mode at a higher energy and dose represents the onset of plastic deformation of the irradiated surface. Furthermore, the influence of rapid thermal annealing (RTA) shows a reverse LO and TO phonon peakshift and the change in the lineshape due to reduction of the amorphous disorder.     

Dry sliding tribological behavior of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam

The dry sliding tribological behavior of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam (HIPIB) at energy density of 3.4 J/cm² with 10 shots is investigated by dry sliding wear tests in order to explore the effect of HIPIB irradiation on tribological property of magnesium alloy. Surface morphologies, composition and structure of the irradiated AZ31 magnesium alloys are examined by electron probe microanalysis (EPMA) and X-ray diffraction (XRD). The results indicated that HIPIB irradiation led to the increase in surface microhardness and the reduction in friction coefficient and wear rate. Wear rate for both the original and the irradiated samples increased with increasing sliding load from 0.1 to 0.5 N. The transition from severe metallic wear to mild oxidative wear induced by HIPIB irradiation was observed by a combined analysis in surface morphology and chemical composition of wear tracks, mechanically mixed materials and wear debris, which is mainly attributed to the significant increase in microhardness resulting from grain refinement on the irradiated surface. In addition, defects induced by HIPIB irradiation promoted the diffusion of oxygen during sliding wear and therefore led to the formation of compact mixed materials and protective films on the wear tracks surface, which also contributes to the transition in wear mechanism of AZ31 magnesium alloy induced by HIPIB irradiation.     

Engineering of hydrophilic and plasmonic properties of Ag thin film by atom beam irradiation

Hydrophilic Ag nanostructures were synthesized by physical vapour deposition of 5 nm Ag thin films followed by irradiation with 1.5 keV Ar atoms. Optical absorbance measurements show a characteristic surface plasmon resonance absorption band in visible region. A blue-shift in absorbance from 532 to 450 nm is observed with increasing fluence from 1 × 10¹⁶ to 3 × 10¹⁶ atoms/cm². Atomic force microscopy was performed for the pristine and irradiated samples to study the surface morphology. The atom beam irradiation induced sputtering and surface diffusion lead to the formation of plasmonic surface. Rutherford backscattering spectroscopy of the pristine and irradiated film indicates that metal content in the film decreases with ion fluence, which is attributed to the sputtering of Ag by Ar atoms. The contact angle measurement demonstrates the possibility of engineering the hydrophilicity by atom beam irradiation.     

Surface energy modification by electron beam

We observe a pronounced variation of wettability properties in solid state materials induced by a low-energy electron beam. The phenomenon occurs in several stages characterized by various mechanisms. We show that for low electron doses the irradiation leads to decrease in the wetting of a dielectric surface due to induced surface electric potential. The higher electron charge leads to formation of a chemical monolayer on material’s surface. It has been found that the electron irradiation strongly modifies the surface free energy of SiO₂ by decreasing its total surface free energy value, almost twice. However, electron-induced variations of dispersive and polar components of the surface free energy are quite different and depend of incident electron charge.     

Wettability characteristic of PTFE and glass surface irradiated by keV ions

Commercial PTFE and soda lime glass were irradiated by keV O³⁺ and F⁴⁺. After irradiation, in contrast to the decrease of contact angle on PTFE, contact angle on glass increased apparently. SEM observation revealed that irradiation did not cause noticeable change in surface topological structure. XPS was used to investigate chemical structure changes on the surface. Defluorination effect and formation of oxygen containing group caused by irradiation were considered to the reason of more hydrophilic PTFE surface. On the surface of irradiated glass, more carbon contaminations were observed. The differences of underlying physical and chemical processes between the two kinds of samples are discussed.     

紫外辐照对聚醚酰亚胺薄膜介电性能的影响北大核心CSCD

研究了不同紫外辐照时间对聚醚酰亚胺(PEI)薄膜介电性能的影响。采用FT-IR和SEM表征了PEI薄膜的分子结构和微观形貌。结果表明,紫外辐照后PEI薄膜在1742cm^(-1)处的吸收峰比原薄膜增大,说明PEI分子链中的C=O基团随辐照时间的增加而增加,并在薄膜表面产生了微裂纹。对PEI薄膜的介电性能进行的研究结果表明,随着紫外辐照时间的增加,PEI薄膜的介电常数和介电损耗增大,而表面电阻率下降,体积电阻率基本不变。并随紫外辐照时间的增加,直流击穿强度呈先增加后降低的趋势,一定辐照剂量可使薄膜发生交联反应,使击穿场强较原薄膜提高20%以上。     

Effects of Nd:YAG laser irradiation on structural, morphological, cation distribution and magnetic properties of nanocrystalline CoFe2O4

The cobalt ferrite nanoparticles of 20 nm size were synthesized by sol-gel auto-combustion technique. The samples were irradiated with Nd:YAG laser to understand the effects of irradiation on structural, cation distribution and magnetic properties. The virgin and irradiated samples were characterized by X-ray diffraction technique. The X-ray diffraction studies at room temperature shows that defects were created in the lattice after irradiation which causes effects on structural, cation distribution and magnetic properties. The energy dispersive analysis of X-rays (EDAX) showed the chemical composition is as per the expected stichiometry. The lattice constant observed from XRD data for virgin and irradiated samples shows increasing trend after irradiation. Cation distribution was investigated by using X-ray diffraction method. We observe decrease in magnetization of the samples after irradiation. The observed reduction in the saturation magnetization after irradiation can be understood on the basis of the partial formation of paramagnetic centers and rearrangement of cations in the lattice.     

Topological and chemical investigation on super-hydrophobicity of PTFE surface caused by ion irradiation

Super-hydrophobic PTFE surfaces were obtained by irradiation of 200 keV Xe⁺ ion with the fluence of 6.2×10¹³ ions/cm². The contact angle of water on such surface is as large as 161±3°. SEM and XPS were used to investigate how the topological and chemical changes affect the wettability of the irradiated surface. Needle like structures at nanometer scale caused by irradiation are considered to be the reason of the super-hydrophobicity. The formation of oxygen containing group and defluorination effect on the treated surface are inferred to have negative contribution to the hydrophobic optimization of PTFE surface.     

III-V族化合物半导体材料的高能重离子辐照效应

用高能（５００ＭｅＶ）Ｎｅ离子束对ＧａＡｓ和ＩｎＰ进行了辐照，用ＭｏｎｔｅＣａｒｌｏ模拟、正电子湮没谱学以及红外光谱研究了辐照产生的缺陷特性．结果表明，在未辐照的样品中存在单空位，经辐照后，可在样品中产生单空位；当剂量较大时，还会形成双空位甚至尺寸较大的空洞．红外光谱测量发现，在辐照后的ＧａＡｓ样品中有非晶区形成．此外，辐照在样品中还产生了反位缺陷ＧａＡｓ和ＩｎＰ以及受主杂质ＺｎＩｎ．对经１０１４ｉｏｎｓ／ｃｍ２剂量辐照的ＩｎＰ进行了光学实验，在辐照后的ＩｎＰ材料中发现了亚稳态中心． Both GaAs and InP were irradiated by high energy (500 MeV) Ne ions. The Monte Carlo simulation, positron annihilation and IR spectroscopy were used to study the radiation induced defects. The result showed that monovacancies existed in as grown samples, but more monovacancies were introduced, after Ne ions irradiation, and with increasing radiation dose, divacancies were formed, and eventually large voids were observed. The IR measurement for irradiated GaAs samples confirmed the...     

Surface analysis of oxygen plasma treated poly(p-phenylene benzobisoxazole) fibers

The influence of oxygen plasma treatment on surface properties of poly(p-phenylene benzobisoxazole) (PBO) fibers and aging effect of the oxygen plasma modified PBO fiber surfaces were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and dynamic contact angle analysis (DCAA), respectively. The results indicated that the oxygen plasma treatment introduced some polar groups to PBO fiber surfaces, enhanced surface roughness and changed surface morphologies of PBO fibers by plasma etching and oxidative reactions. Surface wettability of PBO fibers may be significantly improved by increasing surface free energy of the fibers via oxygen plasma treatment. Aging effect of the oxygen plasma treated PBO fibers showed that the fiber surface wettability degraded in the first several days after the plasma treatment, and it was found to be changeless as the aging time continued as long as 30 days.