Magnetic Study of Nanocrystalline Ferrites and the Effect of Swift Heavy Ion Irradiation

100 MeV Si⁺⁷ irradiation induced modifications in the structural and magnetic properties of Mg_0.95Mn_0.05Fe₂O₄ nanoparticles have been studied by using X-ray diffraction, Mössbauer spectroscopy and a SQUID magnetometer. The X-ray diffraction patterns indicate the presence of single-phase cubic spinel structure of the samples. The particle size was estimated from the broadened (311) X-ray diffraction peak using the well-known Scherrer equation. The milling process reduced the average particle size to the nanometer range. After irradiation a slight increase in the particle size was observed. With the room temperature Mössbauer spectroscopy, superparamagnetic relaxation effects were observed in the pristine as well as in the irradiated samples. No appreciable changes were observed in the room temperature Mössbauer spectra after ion irradiation. Mössbauer spectroscopy performed on a 12 h milled pristine sample (6 nm) confirmed the transition to a magnetically ordered state for temperatures less than 140 K. All the samples showed well-defined magnetic ordering at 5 K, whereas, at room temperature they were in a superparamagnetic state. From the magnetization studies performed on the irradiated samples, it was concluded that the saturation magnetization was enhanced. This was explained on the basis of SHI irradiation induced modifications in surface states of the nanoparticles.     

Effect of calcinations on the structural and magnetic properties of magnesium ferrite nanoparticles prepared by sol gel method

Magnesium ferrite nanoparticles calcined at 300 °C, 350 °C, 400 °C, 450 °C were synthesized by sol-gel method. The effects of calcinations on the cation distribution, structural and magnetic properties have been investigated. X-ray diffraction (XRD) and vibrating scanning magnetometer (VSM) were used to characterize the structural and magnetic properties. X-ray diffraction analysis revealed the formation of single phase MgFe₂O₄ in all the samples. Lattice constant and crystallite size increased with calcination. X-ray diffraction data were used to estimate the average cationic distribution among A site and B site. Cationic distribution shows that there is migration of cation between tetrahedral A site and octahedral B site. Saturation magnetization increased with particle size. Coercivity decreased with calcination temperature as a result of decrease in pinning effect at the grain boundary. Curie temperature (T_C) decreased slightly due to weakening of A-B exchange interaction. Low temperature magnetic measurement revealed that blocking temperature (T_B) increased due to strong magnetic interaction.     

Temperature and magnetic field induced structural transformation in Si-doped CeFe2: An in-field X-ray diffraction study

Using the X-ray powder diffraction technique at various temperatures and applied magnetic fields, we have studied the magnetostructural properties of Ce(Fe_0.95Si_0.05)₂. The X-ray diffraction data establish quantitative relationships between bulk magnetization and the evolution of structurally distinct phases with magnetic field and temperature, and confirm the distinct features of a first-order phase transition such as supercooling and superheating, metastability, and phase co-existence of different structural polymorphs. We observe the lattice volume mismatch across the structural phase transition, which appears to be the cause for the step behavior of the magnetization isotherms at low temperatures. The present study shows that the lattice distortion has to be treated explicitly, like spin, along with the effects of lattice–spin coupling to account for the magnetization behavior of this system. This structure template can resolve the issue of kinetics in this material as observed in different time scale measurements and with different experimental protocols.     

Interaction of oxygen (O+7) ion beam on polyaniline thin films

High-energy ion beam irradiation of the polymers is a good technique to modify the properties such as electrical conductivity, structural behaviour and mechanial properties. Polyaniline thin films doped with hydrochloric acid (HCl) were prepared by oxidation of ammonium persulphate. The effect of Swift Heavy Ions irradiation on the electrical and structural properties of polyaniline has been measured in this study. Polyaniline films were irradiated by oxygen ions (energy 80 MeV, charge state O⁺⁷) with fluence varying from 1 × 10¹⁰ to 3 × 10¹² ions/cm². The studies on electrical and structural properties of the irradiated polymers were investigated by measuring V-I using four probe set-up and X-ray diffraction (XRD) using Bruker AXS, X-ray powder diffractometer. V-I measurements shows an increase in the conductivity of the film, XRD pattern of the polymer shows that the crystallinity improved after the irradiation with Swift Heavy Ions (SHI), which could be attributed to cross linking mechanism.      

Effect of Cation Proportion on the Structural and Magnetic Properties of Ni-Zn Ferrites Nano-Size Particles Prepared By Co-Precipitation Technique

用共沉淀法制备了结构式为Ni1-xZnxFe2O4 (x=0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7)的铁酸盐纳米颗粒,并对这些纳米颗粒进行了X射线衍射,磁化和交流易感性的测量．X射线衍射的分析结果确认了样品中形成的单相结构．从X射线衍射谱获得的晶格参数随锌的配比x的增大而增大．通过X射线衍射强度比的计算获得了阳离子分布．磁化研究的结果表明在x<0.4时亚铁磁结构与磁性有共线性关系,而x>0.4时没有共线性关系．交流易感性测量获得的居里温度TC被发现随x的升高而降低．     

X-ray diffraction,microstructure, Mössbauer and magnetization studies of nanostructured Fe50Ni50 alloy prepared by mechanical alloying

Nanocrystalline Fe₅₀Ni₅₀ alloy samples were prepared by the mechanical alloying process using planetary high-energy ball mill. The alloy formation and different physical properties were investigated as a function of milling time, t, (in the 0–50 h range) by means of the X-ray diffraction (XRD) technique, scanning electron microscopy (SEM), energy dispersive X-ray (EDAX), Mössbauer spectroscopy and the vibrating sample magnetometer (VSM). The complete formation of γ-FeNi is observed after 24 h milling. When milling time increases from 0 to 50 h, the lattice parameter increases towards the Fe₅₀Ni₅₀ bulk value, the grain size decreases from 67 to 13 nm, while the strain increases from 0.09% to 0.41%. Grain morphologies at different formation stages were observed by SEM. Saturation magnetization and coercive fields derived from the hysteresis curves are discussed as a function of milling time.     

Thermally induced changes in magnetic, transport and electronic properties of Fe/Al multilayers

The effect of thermal annealing on the magnetic, transport and electronic properties of electron beam evaporated Fe/Al multilayer samples (MLS), with an overall atomic concentration ratio of Fe/Al 1:1, have been investigated. The grazing incidence X-ray diffraction, resistivity and valance band photoemission measurements indicates the formation of sub-stoichiometric B2 FeAl intermetallic phase at the interface for the MLS annealed at higher temperatures. The corresponding magnetization measurements show large increase in coercivity and drastic reduction in magnetization values. The observed magnetization behaviour in each case is interpreted in terms of their structural and electronic properties changes induced due to the annealing treatment.     

Magnetic and magneto-transport properties of double perovskite Ba2−xSrxFeMoO6 system

The structural magnetic and magneto-transport properties of double perovskite system Ba_2−xSr_xFeMoO₆ (0?x?1.0) prepared in bulk polycrystalline form are reported in this paper. X-ray diffraction analysis showed that samples are single phase and the lattice constants decreases with increase in the Sr content. The degree of Fe-Mo ordering has been found decreasing in the series with an increase in the Sr content. Parent compound Ba₂FeMoO₆ exhibits saturation magnetic moment value of 3.54 μ_B/f.u. at 85 K in a magnetic field of 6000 Oe. Temperature dependence of resistivity shows metallic behavior for all the samples. The magneto-resistance (MR) of the compound with x=0.4 is higher than that of the other samples. At room temperature this system shows a saturation magnetization value of 1.73 μ_B/f.u. and MR value of 7.08% (1 T). The observed variations in the structural and magnetic properties are attributed to the change of chemical pressure due to the substitution of Sr in place of Ba. The effect of antisite disorder (ASD) defects on magneto-transport properties is studied in more detail.     

EPR, X-ray, and magnetization studies of metastable alloys Ti2Fe, Al40Cu10Mn25Ge25 and Al65Cu20Fe15 as prepared by mechanical alloying

Mechanical alloying (MA) technique has been used to synthesize metastable alloys with nominal compositions Ti₂Fe (MA for 1, 5, and 26 h), Al₆₅Cu₂₀Fe₁₅ (MA for 26 and 34 h) and Al₄₀Cu₁₀Mn₂₅Ge₂₅ (MA for 42 h). These have been studied by EPR, X-ray diffraction, differential thermal analysis (Ti₂Fe only), and magnetization (Ti₂Fe only) techniques. X-ray diffraction provided information on transformation to metastable phases, while the EPR spectra gave insight into inequivalent paramagnetic transition metal sites in the alloys and the temperature variation of magnetic ordering of the samples. Magnetization data on Ti₂Fe system has been interpreted in terms of phase separations within the amorphous phase. It is concluded that MA process significantly influences the magnetic properties of the samples, wherein the duration of MA process plays an important role. The EPR and magnetization data indicate that the disorder of paramagnetic ions within the samples increases with increasing temperature.     

The BCC to FCC/HCP phase transformation of the Co70Fe30 alloy produced by ion irradiation of Co70Fe30/Cu discontinuous multilayers

We report on the BCC to FCC/HCP structural transformation of Co₇₀Fe₃₀ alloy produced by room temperature ion irradiation of Co₇₀Fe₃₀/Cu discontinuous multilayers. The structural changes were analyzed by X-ray diffraction and X-ray absorption spectroscopy. For this study, two different samples were examined, one irradiated with 50 keV He⁺ and another with 600 keV Kr⁺ with doses of 1×10¹⁷ and 3×10¹⁵ ions/cm², respectively. No substantial change is observed after He⁺ irradiation, while after Kr⁺ irradiation an unexpected structural transition from BCC to FCC/HCP closed packed of the Co₇₀Fe₃₀ alloy was found.     

The novel YMn2D6 deuteride synthesized under high pressure of gaseous deuterium

The novel intermetallic deuteride YMn₂D₆ was synthesized under high deuterium pressure. In order to identify the structure and characterize the magnetic properties of this deuteride the powder X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), Mn X-ray absorption near edge structure (XANES) and magnetization measurement (SQUID) were carried out. The crystal structure, the chemical state of Mn and the magnetic properties of this novel deuteride were examined and discussed. It should be noted that the structure of YMn₂D₆ (F-43m) differs dramatically from C15 symmetry of the parent material. Such a great rearrangement of the metal lattice due to deuterium absorption is rather exceptional for C15 Laves phase.     

Er2(Fe1-xCox)15Ga2化合物的磁晶各向异性

通过X射线衍射和磁性测量等手段研究了Er₂(Fe_1-xCo_x)₁₅Ga₂化合物的结构与磁性，重点讨论了它们的磁晶各向异性.实验结果表明，Er₂(Fe_1-xCo_x)₁₅Ga₂化合物均为Th₂Ni₁₇型六角结构，晶格常数a,c和单胞体积V随Co含量的 关键词：     

Microstructure and magnetic properties of bulk amorphous and nanocrystalline Fe61Co10Zr2.5Hf2.5Nb2W2B20 alloy

The microstructure and magnetic properties, i.e. the initial magnetic susceptibility, its disaccommodation, core losses and approach to ferromagnetic saturation of the bulk amorphous and partially crystallized Fe₆₁Co₁₀Zr_2.5Hf_2.5Nb₂W₂B₂₀ alloy are studied. From X-ray, Mössbauer spectroscopy and electron microscopy studies we have stated that all samples in the as-quenched state are fully amorphous. However, after annealing the samples at 850 K for 30 min the crystalline α-FeCo grains embedded in the amorphous matrix are found. Moreover, from Mössbauer spectra analysis we have stated that the crystalline phase in those samples exhibits the long-range order. The alloy in the as-quenched state shows good thermal stability of the initial magnetic susceptibility. Furthermore, the intensity of the magnetic susceptibility disaccommodation in the rod is lower than in the ribbon. It is due to low quenching rate during the rod preparation which involves the reduction of free volumes. From the analysis of the isochronal disaccommodation curves, assuming the Gaussian distribution of relaxation times, we have found that activation energies of the elementary processes responsible for this phenomenon range from 1.2 to 1.4 eV. After the annealing of the samples the initial susceptibility slightly enhances and disaccommodation drastically decreases. From high-field magnetization studies we have learned that the size of structural defects depends on the quenching rate (the shape of the samples) and changes after annealing.     

在不同的退火温度下钴注入二氧化钛结构与磁性

选用能量为180 keV,温度为623 K,注入4×10¹⁶ cm^-2剂量的钴离子束注入TiO₂样品.在不同的退火温度下,用高分辨的扫描电镜、同步辐射X射线衍射、卢瑟福背散射/沟道实验和超导量子干涉仪,分别对样品进行结构与磁性的测试. SR-XRD和HRTEM测试结果表明: 在Co注入TiO₂后,形成了钴的体心立方(hcp)相和面心立方(fcc)相,且在TiO₂中,钴-纳米粒子也已经形成. 随着退     

Space-selective modification of the magnetic properties of transparent Fe3+-doped glass by femtosecond-laser irradiation

We have demonstrated spatially selective modification of the magnetic properties of transparent iron-oxide-doped glass by femtosecond- (fs-) laser irradiation and subsequent annealing. A near-infrared fs-laser beam with a wavelength of 775 nm was focused 1 mm below the surfaces of glass samples. This produces absorption peaks due to the formation of hole-trap centers in the irradiated region. Transparency was recovered after annealing at 450°C. A ferrimagnetic component was observed in the M–H curve even at room temperature, whereas the diamagnetic component dominated in the M–H curve of the as-prepared glass sample. This indicates that fs-laser irradiation enhanced the magnetization in the irradiated area. The irradiated and annealed glass sample also exhibited superparamagnetic blocking in the temperature dependence of the magnetization with a blocking temperature higher than room temperature. This change in magnetism is presumably due to local crystallization of ferrimagnetic nanoparticles, such as magnetite, induced by fs-laser irradiation and annealing. The magnetic and optical properties of glass that had been annealed but not irradiated by a fs-laser beam remained unchanged.     

Synthesis,characterization and magnetic properties of MFe2O4 (M=Co,Mg, Mn,Ni) nanoparticles using ricin oil as capping agent

We focused on obtaining MFe₂O₄ nanoparticles using ricin oil solution as surfactant and on their structural characterization and magnetic properties. The annealed samples at 500 °C in air for 6 h were analyzed for the crystal phase identification by powder X-ray diffraction using CuKα radiation. The particle size, the chemical composition and the morphology of the calcinated powders were characterized by scanning electron microscopy. All sintered samples contain only one phase, which has a cubic structure with crystallite sizes of 12–21 nm. From the infrared spectra of all samples were observed two strong bands around 600 and 400 cm⁻¹, which correspond to the intrinsic lattice vibrations of octahedral and tetrahedral sites of the spinel structure, respectively, and characteristic vibration for capping agent. The magnetic properties of fine powders were investigated at room temperature by using a vibrating sample magnetometer. The room temperature M–H hysteresis loops show ferromagnetic behavior of the calcined samples, with specific saturation magnetization (M_s) values ranging between 11 and 53 emu/g.     

Role of oxygen impurity in growth and magnetic properties of Ni83Fe17 permalloy thin films

To study the influence of oxygen impurities in the sputtering atmosphere on microstructure, and the magnetic and magnetotransport properties, thin films of Ni₈₃Fe₁₇ were deposited under dc magnetron sputtering technique into which regulated oxygen gas was introduced. The partial pressure of oxygen was varied from 2×10⁻⁷ to 3×10⁻⁶ mbar. X-ray diffraction patterns indicate the reduction of grain growth with increasing the oxygen partial pressure. The grain microstructure and the composition were confirmed through high resolution transmission electron microscopy attached with Scanning Transmission Electron Microscopy (STEM). Transition from canted to rectangular magnetic hysteresis loop was observed through magnetization measurements for samples prepared under higher oxygen partial pressure which implies the structural changes in the magnetic domain formation. These observations were further confirmed through the measurements of anisotropic magnetoresistance properties.     

Effect of gamma-irradiation on the structural,optical and electrical properties of PEO/starch blend containing different concentrations of gold nanoparticles

ABSTRACT

Blend of polyethylene oxide (PEO)/starch (70/30 wt.%) filled with different amounts of gold nanoparticles (AuNPs) were prepared using the casting technique. X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) techniques were used to investigate the structure of polymeric samples before and after exposing to gamma irradiation at different times. XRD showed a gradual decrease in intensity of crystalline peaks with increasing the gamma dose denotes a decrease in the amount of crystalline phase in the films, while the FTIR measurement shows induced changes in chemical structure assigned to the AuNPs amount and irradiation times. The optical energy gap values (E_g) for unirradiated and irradiated samples were calculated and interpreted. The differential scanning calorimetry (DSC) which showed the miscibility between the two components of the blend. The electrical conductivity (σ) measurement was showed increased in electrical conductivity after exposure to the gamma dose. The gold nanoparticles were used as nano?ller to improve the structural and electrical properties of polymeric samples. The results showed the Gamma irradiation significantly effect on the structural and electrical properties of PEO/starch blend.     

Structural and magnetic studies on mechanosynthesized BaFe12−xMnxO19

Barium hexaferrite powders with manganese substitution were prepared by mechanosynthesis. The structural and magnetic properties were characterized by X-ray diffractometer and vibration sample magnetometer, respectively. XRD patterns were refined by Rietveld method. Preferential site occupation of manganese ion was investigated by room temperature (RT) Mössbauer measurements. XRD results showed a single-phase barium hexaferrite with some residual hematite. Crystallite size was observed to decrease with substitution amount. Lower saturation magnetization and increased coercivity is observed in substituted samples. RT Mössbauer measurements showed that manganese ions preferentially occupy 12k, 4f₂, and 2a sites.     

Ba掺杂及工艺对BiFeO_3体系结构和磁特性的影响

用溶胶-凝胶+快速热处理方法制备Bi_1-xBa_xFeO_3(BBFO-x,x=0,0.05,0.15)陶瓷材料,研究不同工艺条件和元素掺杂对样品的结构和磁特性的影响,实验结果表明,BBFO-x纯相样品制备工艺要求较高,在工艺条件为800℃下退火450s时,样品具有最好的结构及磁性能;X射线衍射测试表明,Ba元素替代会引起晶格畸变,但没有改变样品的宏观晶格结构;Raman光谱测试进一步证实了样品的纯相结构及Ba元素掺杂对样品结构的影响;此外,Ba元素替代有助于增强样品的磁性,其原因在于掺杂使得原有的长程反铁磁螺旋磁结构受到破坏,同时可能出现Fe离子价态变化,产生自旋耦合,从而在样品中表现出更大的宏观净磁矩,本工作可对开展这一单相多铁材料体系的微观结构以及磁电耦合效应的研究提供很好的实验基础。