Modified thermal evaporation process using GeO2 for growing ZnO structures

In the current work, zinc oxide (ZnO) nano/microstructures are synthesized using a modified thermal-evaporation process by introducing germanium oxide (GeO₂) powder mixed with metallic Zn powder as the raw material. Without the use of any catalyst and oxygen flow in the furnace system, GeO₂ is utilized to provide an oxygen source for the growth of ZnO structure. The samples are treated by different temperatures ranging from 500 to 900 °C. Morphology, phase structure, and photoluminescence properties are investigated by scanning electron microscopy (SEM), X-ray diffractometer (XRD) and photoluminescence (PL) spectrometer. The structures and morphologies of the samples were found to vary with growth temperature. The XRD diffraction peaks show that the films grown at temperature from 600 to 800 °C consist of hexagonal wurtzite ZnO structures. Room-temperature PL measurement revealed ZnO spectra representing two bands: near-band-edge emission in the ultraviolet (UV) region and broad deep-level emission centered at about 500 nm. The strong UV emission in the PL spectra indicates that the GeO₂ supplies sufficient oxygen for formation of ZnO structures with few oxygen vacancies. The growth mechanism and the roles of GeO₂ for formation of ZnO structures are discussed in detail.     

Fabrication and characterization of Mg-doped pencil-shaped ZnO microprisms

Two types of novel Mg-doped pencil-shaped ZnO microprisms had been successfully synthesized on Mg(NO₃)₂-coated Si (1 1 1) substrates by thermal chemical vapor deposition method. The as-prepared ZnO prisms were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), field-emission transmission electron microscope (FETEM), selected area electron diffraction (SAED), and photoluminescence (PL) spectroscopy. The straight microprisms are made up of hexagonal pyramids tips and hexagonal prisms bodies. Both of the structures are perfect single crystal and have grown along the [0 0 0 1] direction preferentially. Photoluminescence reveals a red-shift at around 387 nm which is induced by Mg doping and a green light emission peak at around 511 nm. The pencil-shaped ZnO microstructure can provide an improvement in novel ultraviolet light-emitting devices. In addition, the growth mechanism of the special ZnO microprisms is discussed briefly.     

Synthesis and performance of core-shell structured ZnO/In2O3 composites in situ growth

Core-shell structured ZnO/In₂O₃ composites were successfully synthesized via situ growth method. Phase structure, morphology, microstructure and property of the products were investigated by X-ray diffraction (XRD), TG-DTA, field emission scanning electron microscopy (FESEM), energy-dispersive spectrometry (EDS), transmission electron microscope (TEM) and photoluminescence (PL). Results show that the core-shell structures consist of spindle-like ZnO with about 800 nm in length and 200 nm in diameter, and In₂O₃ particles with a diameter of 50 nm coated on the surface of ZnO uniformly. HMTA plays an important role in the formation of core-shell structures and the addition of In₂O₃ has a great effect on PL spectrum. Possible mechanism for the formation of core-shell structures is also proposed in this paper.     

Well-aligned ZnO rod arrays grown on glass substrate from aqueous solution

Well-aligned ZnO rod arrays have been successfully synthesized on glass substrate from the aqueous solution of Zn(NO₃)₂·6H₂O and C₆H₁₂N₄ (HMT). Some critical issues such as seed layers, concentration and reaction time were investigated. The results show that ZnO seed layers were pre-requisite for the aligned growth of ZnO rod arrays. The length of rods is tunable in a range from 2 μm to 3 μm by varying the solution concentration and reaction time. X-ray diffraction results demonstrate that ZnO rods are wurtzite crystal structures preferentially orienting in the direction of the c-axis. Microstructure observation by scanning electron microscope confirms that ZnO rods grew up perpendicular to the substrate. Room-temperature photoluminescence (PL) spectrum of rod arrays shows a strong emission band at about 396 nm.     

Effect of Fe doping on the structural and gas sensing properties of ZnO porous microspheres

Fe-doped ZnO porous microspheres composed of nanosheets were prepared by a simple hydrothermal method combined with post-annealing, and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Brunauer–Emmett–Teller N₂ adsorption–desorption measurements and photoluminescence (PL) spectra. In this paper we report Fe doping induced modifications in the structural, photoluminescence and gas sensing behavior of ZnO porous microspheres. Our results show that the crystallite size decreases and specific surface area increases with the increase of Fe doping concentration. The PL spectra indicate that the 4 mol% Fe-doped ZnO has higher ratio of donor (V_O and Zn_i) to acceptor (V_Zn) than undoped ZnO. The 4 mol% Fe-doped ZnO sample shows the highest response value to ppb-level n-butanol at 300 °C, and the detected limit of n-butanol is below 10 ppb. In addition, the 4 mol% Fe -doped ZnO sample exhibits good selectivity to n-butanol. The superior sensing properties of the Fe-doped porous ZnO microspheres are contributed to higher donor defects contents combined with larger specific surface area.     

Influence of growth temperature and post-annealing on an n-ZnO/p-GaN heterojunction diode

We report on an n-ZnO/p-GaN heterojunction diode fabricated from zinc oxide (ZnO) films at various growth temperatures (450, 500, 550, and 600 °C) by RF sputtering. The films were subsequently annealed at 700 °C in N₂ ambient. To investigate the influence of the growth temperature of n-ZnO films, the microstructural, optical, and electrical properties were measured using scanning electron microscopy (SEM), X-ray diffraction (XRD), photoluminescence (PL), and Hall measurements. The XRD pattern showed the preferred orientation along the c-axis (002) regardless of growth temperature. The PL spectra showed a dominant sharp near-band-edge (NBE) emission. Current–voltage (I–V) curves showed excellent rectification behavior. The turn-on voltage of the diode was observed to be 3.2 V for the films produced at 500 °C. The ideality factor of ZnO film was observed to be 1.37, which showed the best performance of the diode.     

Hierarchical ZnO/Bi2O3 nanostructures: synthesis, characterization, and electron-beam modification

Two types of ZnO/Bi₂O₃ nanonecklace heterostructures were fabricated using the vapor-phase transport (VPT) method for the first time. These hierarchical structures were well characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) with energy dispersive spectroscopy (EDS) attached. The growth mechanism of the novel structures were proposed based on these characterizations. Electron-beam irradiation was found to be a powerful and controllable tool in further tailoring such ZnO/Bi₂O₃ nanonecklace heterostructures. In addition, photoluminescence (PL) emission from the hierarchical nanostructures showed enhancement comparing to the pure Bi₂O₃ powder.     

制备一维可控形貌的ZnO微米棒

用化学溶液法以醋酸锌和六亚甲基四胺为原料在玻璃衬底上生长出不同形貌的亚微米和微米ZnO棒。探讨了反应液的酸碱度和反应液浓度对生成的ZnO棒形貌的影响，并分析了其生长机制。通过控制一定的酸碱度和溶液浓度，可以得到规则的六角ZnO棒状阵列。这种规则的六角棒沿着[002]方向生长。测量了样品的XRD，扫描电镜像(SEM)，并对其发光性能进行了测量分析。其中规则六角ZnO棒的光致发光光谱中有一很强的峰值650nm红色宽谱带和一峰值约387nm的激子发光峰。激子发光峰加宽，实际上是自由激子的发光峰(380nm)和Zni的发光峰(430nm)的叠加。而红色发光峰可能是Vo2+中的电子和价带中的空穴辐射复合所致。     

Optical properties of p-type ZnO doped by lithium and nitrogen

A lithium and nitrogen doped p-type ZnO (denoted as ZnO: (Li, N)) film was prepared by RF-magnetron sputtering and post annealing techniques with c-Al₂O₃ as substrate. Its transmittance was measured to be above 95%. Three dominant emission bands were observed at 3.311, 3.219 and 3.346 eV, respectively, in the 80 K photoluminescence (PL) spectrum of the p-type ZnO:(Li, N), and are attributed to radiative electron transition from conduction band to a Li_Zn-N complex acceptor level (eFA), radiative recombination of a donor-acceptor pair and recombination of the Li_Zn-N complex acceptor bound exciton, respectively, based on temperature-dependent and excitation intensity-dependent PL measurement results. The Li_Zn-N complex acceptor level was estimated to be about 126 meV above the valence band by fitting the eFA data obtained in the temperature-dependent PL spectra.     

Photoluminescence, FTIR and X-ray diffraction studies on undoped and Al-doped ZnO thin films grown on polycrystalline α-alumina substrates by ultrasonic spray pyrolysis

Undoped and aluminum-doped zinc oxide (ZnO) thin films have been grown on polycrystalline α-alumina substrates by ultrasonic spray pyrolysis (USP) technique using zinc acetate dihydrate and aluminum chloride hexahydrate (Al source) dissolved in methanol, ethanol and deionized water. A number of techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and photoluminescence (PL) were used to characterize the obtained ZnO thin films. It was seen that the orientation changed with increase in substrate temperature. During the ZnO deposition Zn source reacted with polycrystalline α-Al₂O₃ substrate to form an intermediate ZnAl₂O₄ spinel layer. It has been interestingly found that the intensity of green emission at 2.48 eV remarkably increased when the obtained ZnO:Al films were deposited at 380 °C. The FTIR absorbance intensity of spectroscopic band at 447±6 cm⁻¹ is very sensitive to oxygen sublattice disorder resulting from non-stoichiometry, which is consistent with the result of PL characterization.     

Hydrothermal synthesis and characterization of ZnO films with different nanostructures

ZnO films with morphologies of nanorods, nanowires and nanosheets were grown on F-doped SnO₂ glass substrate, which may have potential application in solar cells. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to characterize the structures and morphologies of the as-synthesized samples. The photoluminescence (PL) and the photoelectrochemical properties of ZnO films were also measured. The results showed that ZnO nanorods preferentially oriented along the c-axis and had the largest photocurrent density which is as high as 60 μA/cm².     

ZnO films grown by laser ablation with and without oxygen CVD

In the present work we have studied the properties of zinc oxide (ZnO) thin films grown by laser ablation of ZnO targets under different substrate temperature and background oxygen conditions. The ZnO layers were deposited with a Pulsed Laser Deposition (PLD) system on pre-nitrided (0001) sapphire (Al₂O₃), using the base line of a Nd:YAG laser at 1064 nm. The films were characterized by different structural and optical methods, including X-ray diffraction (XRD), scanning electron microscopy (SEM), optical transmission spectroscopy, and steady-state photoluminescence (PL). XRD analysis with rocking curves and θ–2θ scans indicates preferential growth along the c-axis direction with a full width at half maximum (FWHM) smaller than 1.5. Low-temperature photoluminescence (PL) showed strong excitonic emission near 3.36 eV between 9 and 65 K.     

Effects of the substrate and oxygen partial pressure on the microstructures and optical properties of Ti-doped ZnO thin films

Ti-doped ZnO (ZnO:Ti) thin films were deposited on the glass and Si substrates using radio frequency reactive magnetron sputtering. The effects of substrate on the microstructures and optical properties of ZnO:Ti thin films were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and a fluorescence spectrophotometer. The structural analyses of the films indicated that they were polycrystalline and had a hexagonal wurtzite structure on different substrates. When ZnO:Ti thin film was deposited on Si substrate, the film had a c-axis preferred orientation, while preferred orientation of ZnO:Ti thin film deposited on glass substrate changed towards (1 0 0). Finally, we discussed the influence of the oxygen partial pressures on the structural and optical properties of glass-substrate ZnO:Ti thin films. At a high ratio of O₂:Ar of 18:10 sccm, the intensity of (0 0 2) diffraction peak was stronger than that of (1 0 0) diffraction peak, which indicated that preferred orientation changed with the increase of O₂:Ar ratios. The average optical transmittance with over 93% in the visible range was obtained independent of the O₂:Ar ratio. The photoluminescence (PL) spectra measured at room temperature revealed four main emission peaks located at 428, 444, 476 and 527 nm. Intense blue-green luminescence was obtained from the sample deposited at a ratio of O₂:Ar of 14:10 sccm. The results showed that the oxygen partial pressures had an important influence for PL spectra and the origin of these emissions was discussed.     

Synthesis and optical properties of ZnO nanorods on indium tin oxide substrate

ZnO nanorods with uniform diameter and length have been synthesized on an indium-tin oxide (ITO) substrate by using a simple thermal evaporation method which is suitable to larger scale production and without any catalyst or additives. The samples were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-vis (UV-vis) absorption spectrum, photoluminescence (PL) spectrum and Raman spectrum. The single-phase ZnO nanorods grow well-oriented along the c-axis of its wurtzite structure on ITO substrate. The ZnO nanorods shows sharp and strong UV emission located at 380 nm without notable visible light emission in the PL spectrum, which suggests the good crystallinity of the nanorods, which was also testified by their Raman spectrum. The photodegradation of methylene orange (MO) in aqueous solution reveals that the well-arranged c-axis growth of ZnO nanorods possess evidently improved photocatalytic performance and these properties enable the ZnO nanorods potential application in UV laser.     

Controlling the orientation of ZnO nanorod arrays using TiO<Subscript>2</Subscript> thin film templates dip-coated by sol–gel

The oriented ZnO nanorod arrays have been synthesized on a silicon wafer that coated with TiO₂ films by aqueous chemical method. The morphologies, phase structure and the photoluminescence (PL) properties of the as-obtained product were investigated by field-emission scanning electron microscopy (FE-SEM), X-ray diffractometer (XRD), transmission electron microscope (TEM) and PL spectrum. The nanorods were about 100 nm in diameter and more than 1 μm in length, which possessed wurtzite structure with a c axis growth direction. The room-temperature PL measurement of the nanorod arrays showed strong ultraviolet emission. The effect of the crystal structure and the thickness of TiO₂ films on the morphologies of ZnO nanostructures were investigated. It was found that the rutile TiO₂ films were appropriate to the oriented growth of ZnO nanorod arrays in comparison with anatase TiO₂ films. Moreover, flakelike ZnO nanostructures were obtained with increasing the thickness of anatase TiO₂ films.     

Surface morphology of ZnO buffer layer and its effects on the growth of GaN films on Si substrates by magnetron sputtering

ZnO thin films were first prepared on Si(111) substrates using a radio frequency magnetron sputtering system. Then the as-grown ZnO films were annealed in oxygen ambient at temperatures of 700, 800, 900, and 1000°C , respectively. The morphologies of ZnO films were studied by an atom force microscope (AFM). Subsequently, GaN epilayers about 500 nm thick were deposited on the ZnO buffer layers. The GaN/ZnO films were annealed in NH₃ ambient at 900°C. The microstructure, morphology and optical properties of GaN films were studied by x-ray diffraction (XRD), AFM, scanning electron microscopy (SEM) and photoluminescence (PL). The results are shown, their properties having been investigated particularly as a function of the ZnO layers. For better growth of the GaN films, the optimal annealing temperature of the ZnO buffer layers was 900°C.     

Nanoporous structures on ZnO thin films

Porous structures were formed on ZnO thin films which were grown by an electrochemical deposition (ECD) method. The growth processes were carried out in a solution of dimethylsulfoxide (DMSO) zinc perchlorate, Zn(ClO₄)₂, at 120 ^°C on indium tin oxide (ITO) substrates. Optical and structural characterizations of electrochemically grown ZnO thin films have shown that the films possess high (0002) c$c$-axis orientation, high nucleation, high intensity and low FWHM of UV emission at the band edge region and a sharp UV absorption edge. Nanoporous structures were formed via self-assembled monolayers (SAMs) of hexanethiol (C₆SH) and dodecanethiol (C₁₂SH). Scanning electron microscope (SEM) measurements showed that while a nanoporous structure (pore radius 20 nm) is formed on the ZnO thin films by hexanathiol solution, a macroporous structure (pore radius 360 nm) is formed by dodecanethiol solution. No significant variation is observed in X-ray diffraction (XRD) measurements on the ZnO thin films after pore formation. However, photoluminescence (PL) measurements showed that green emission is observed as the dominant emission for the macroporous structures, while no variation is observed for the thin film nanoporous ZnO sample.     

Evolutions of defects and blue–green emissions in ZnO microwhiskers fabricated by vapor-phase transport

The corresponding evolutions of morphologies, defect-states and the PL properties have been employed to explore the defect-origins of visible emissions and growth mechanisms of microstructured ZnO. ZnO microtube and microrod whiskers were fabricated by non-catalytic vapor-phase transport using ZnO and graphite powders in air. The microstructures of the samples were studied in detail based on scanning electron microscopy (SEM), x-ray diffraction (XRD), energy-dispersive x-ray spectroscopy (EDX), and electron paramagnetic resonance (EPR). The main PL emission bands evolve from blue to green, which corresponds to that the main defect-states change from Zn interstitials (Zn_i) to O vacancies (V_O). The formation of Zn_i under the high temperature zinc-rich vapor environment is crucial both for the blue emission and for the formation of the microtubes.     

The growth of the flower-like ZnO structure using a continuous flow microreactor

ZnO is a valuable material for display devices, for catalytic chemical reactors, and as sorbents for desulfurizaton because of its excellent chemical and thermal stability. In this work, we report the synthesis of flower-like ZnO structures using a continuous flow microreactor over an oxidized silicon substrate. A chemical solution that employed zinc acetate [Zn(CH₃COO)₂ · 2H₂O] and sodium hydroxide [NaOH] was used as precursors. The effects of water bath temperature, impinging time and concentration of NaOH on the growth of the flower-like structure have been investigated in this study. It was confirmed that the size of the fabricated flower-like structure was increased as the impinging time and the water bath temperature were increased. Various flower-like morphologies were observed according to the different concentration of NaOH. Scanning electron microscope (SEM) was used to study the morphologies of the synthesized flower-like ZnO structures. X-ray diffraction (XRD) was used to characterize the crystal structures of the ZnO crystallites as a function of the concentration of sodium hydroxide.     

Sonochemical synthesis and optical properties of amorphous ZnO nanowires

Large-scale amorphous wire-like ZnO nanostructures were prepared by ultrasonic spray pyrolysis Zn(CO)₅ without involvement of any template or patterned catalyst. The as-obtained amorphous ZnO nanowires were characterized using scanning/transmission electron microscopy, X-ray diffraction/photoelectron spectroscopy, energy-dispersed X-ray spectrometry, selected area electronic diffraction, and high-resolution transmission electron microscopy. The results reveal the as-made noncrystalline samples are about 30–60 nm in diameter and several tens of microns in length and the growth mechanism is tentatively proposed as the self-assembly soft template mechanism. The photoluminescence spectra in all of the as-studied specimens exhibit one wide visible emission peak in about 508 nm. The corresponding PL intensity greatly increased with an annealing temperature, which has an application for a high efficiency vacuum fluorescent displays and a low-voltage phosphor.