共查询到20条相似文献,搜索用时 46 毫秒
1.
数字无透镜傅里叶变换全息术中非傍轴及离焦像差的校正 总被引:2,自引:0,他引:2
对数字无透镜傅里叶变换全息图直接采用逆傅里叶变换进行物场的数值重建时.需要满足两个条件:第一,全息图的记录过程必须满足傍轴近似条件,否则再现过程中会产生非傍轴像差;第二,记录全息图时物平面与参考点光源到全息图记录平面的距离必须相等,否则再现过程中会产生离焦像差.理论分析了非傍轴及离焦记录条件下数字无透镜傅里叶变换全息图的灰度分布特点,并提出了相应的非傍轴及离焦像差的数值校正方法.根据实际的非傍轴或离焦记录情况.分别给所记录的数字全息图灰度分布矩阵乘以适当的非傍轴或离焦校正因子,以消除灰度矩阵中非傍轴或离焦因素的影响.然后再对校正后的伞息图灰度矩阵做逆傅里叶变换处理.即可得到准确的数字再现像.实验结果表明.该数值重建方法能够有效地消除无透镜傅里叶变换全息术中数字再现像的非傍轴像差及离焦像差,提高再现像的质量. 相似文献
2.
CHEN Jianwen XU Zhizhan ZHU Peiping XIAO Tiqiao KOULeigang WANG Zhijiang 《Chinese Journal of Lasers》1994,3(1):77-81
SomeProblemsonReconstructionofSoftX-rayHologramwithVisibleLight¥CHENJianwen;XUZhizhan;ZHUPeiping;XIAOTiqiao;KOULeigang;WANGZh... 相似文献
3.
无透镜傅里叶变换全息图数值再现中的图像处理 总被引:6,自引:4,他引:2
针对无透镜傅里叶变换全息图数值再现过程的特点,提出了一套不同于以往的削弱或消除全息图0级衍射和孪生像的数字图像处理算法。该算法分为三步。首先,对所拍摄的数字全息图通过高通滤波实现衬比度增强预处理,以提高全息图的衍射效率并消除再现图像的0级衍射斑;其次,对再现图像进行带通及Ⅴ型滤波,以降低背景噪声并使再现视场均匀;最后,对所得到的再现像进行平滑处理,通过小波滤噪和中值滤波进一步提高再现像的信噪比。实验结果表明,该方法只需记录一幅数字全息图,通过简单的数字图像处理,便可明显改善图像质量,尤其适用于无透镜傅里叶变换全息图的数值再现,并且更加实用化。 相似文献
4.
全息图数字再现中零级衍射斑的消除 总被引:4,自引:0,他引:4
分析了无透镜傅里叶变换全息图数字再现时零级衍射斑对再现像的影响,提出了用全息数字相减及数字重现来消除零级斑实现无零级数字全息再现的方法,给出了计算机模拟实验结果,并对再现结果作了分析。 相似文献
5.
根据全息理论和线性系统理论,采用离轴无透镜傅里叶变换全息记录光路,对利用菲涅耳近似法、基于瑞利—索末菲衍射积分的卷积法以及角谱理论方法数值重建全息图进行了比较研究,并做了计算机模拟验证.结果表明:菲涅耳近似法和角谱方法重建像质比较好,且菲涅耳方法重建速度快;在记录距离极小的情况下,尽管记录距离不满足通常的菲涅耳近似条件,菲涅耳近似公式仍然成立;自由空间脉冲响应的快速傅里叶变换的性质与距离有关,由卷积方法得到的再现像只在某一特定距离下比较理想;对于极小物场、大孔径显微数字全息来说,菲涅耳近似重建方法是较为有效的方法. 相似文献
6.
J. W. Chen Z. Z. Xu T. Q. Xiao P. P. Zhu L. G. Kou Z. J. Wang 《Optics & Laser Technology》1995,27(6):369-373
Aberrations in the reconstruction of images are analysed, aberration elimination methods are discussed and the feasibility of direct image reconstruction from a lensless Fourier transform X-ray hologram with visible light is investigated. 相似文献
7.
无透镜傅里叶变换数字全息波前重建主要采用全息图的一次快速傅里叶变换方法,重建图像不能充分占有重建平面.本文基于像平面滤波技术,提出对物体局部区域光波场进行放大重建并让重建图像布满重建平面的方法,给出具有精细结构物体的数字全息波前重建实例.此外,将数字全息光波场重建视为具有方形出射光瞳的光学系统的相干光成像过程,导出了物体放大图像的分辨率与光学系统相关参量的关系,并通过实验给予证明. 相似文献
8.
无透镜傅里叶变换数字全息波前重建主要采用全息图的一次快速傅里叶变换方法,重建图像不能充分占有重建平面.本文基于像平面滤波技术,提出对物体局部区域光波场进行放大重建并让重建图像布满重建平面的方法,给出具有精细结构物体的数字全息波前重建实例.此外,将数字全息光波场重建视为具有方形出射光瞳的光学系统的相干光成像过程,导出了物体放大图像的分辨率与光学系统相关参量的关系,并通过实验给予证明. 相似文献
9.
10.
An optical system for lensless Fourier transformed holographic interferometry is constructed to enable the measurement of minute displacements from nanometers to micrometers scale and to obtain corresponding strain distributions using a CCD camera with poor spatial resolution. Since a Fourier spectrum of an object beam is recorded on a hologram in this technique, the image reconstruction is easily performed with a single pass of 2-D fast Fourier transformation. Then, the map of the phase difference over the whole field is obtained by comparing two images before and after deformation. A suitable and effective unwrapping process is, however, inevitably required since the phase difference distribution is wrapped from −π to π in this technique. For phase unwrapping, the maximum spanning tree method is adopted here, which seeks a spanning tree that maximizes overall edge weights given by the cross amplitude. In-plane and out-of-plane displacements are obtained separately from the phase difference distributions at one's request. Moreover, in-plain strain is easily calculated from the in-plane displacement distribution. 相似文献
11.
Causes of the bright cross appearing in the reconstructed field of lensless Fourier transform digital hologram (LFDH) are presented. Firstly, as LFDH's reconstruction was directly performed by Fourier transform algorithm, the intensity distribution of reconstructed image plane was just LFDH's spectrum, and three parts of the reconstructed field are imaged in the spectral plane. Meanwhile their intensities were almost the same. Hence, the ratio of signal to noise of the reconstructed image was obviously lower than that of the conventional digital hologram. Further, non-uniformity of the background intensity and random noises usually existed in a practical LFDH. Meanwhile their spectra spread through the central and the edge areas; this also led to decrease in the ratio of signal to noise of the reconstructed image. Specially, as the two-dimensional Fourier transform algorithm was performed row by row, and then column by column, the low-frequency spectrum induced by the non-uniformity of the background and random noises along the directions of rows and columns would concentrate on the central column and row, respectively, and what is gotten looked like a cross. Therefore, the cross appearing in LFDH's reconstructed field should be attributed to the combination of the background and the Fourier transform algorithm itself. 相似文献
12.
在数字全息成像中, 利用CCD的RGB模式采样全息图时, 全息重构像会出现特定的周期性分布. 本文从理论和实验上详细研究了这种周期像产生的机理、分布特性和应用. 研究结果显示, 由于CCD的光谱滤镜会使全息图的RGB三个单色采样阵列出现部分像素信号的缺失, 因此, 需要通过特定的demosaicing数学算法对缺失的像素信号进行重建以形成完整的单色采样阵列, 这是数字全息再现像周期分布产生的根源. 而基于demosaicing算法的采样阵列重建会在全息图频谱中引入调制函数, 导致物体再现像和零级衍射斑的周期分布差异. 本文揭示了全息图的RGB采样、demosaicing算法与全息重构像周期性之间的内在关联. 最后, 讨论了结合空间移位和图像形态学技术, 利用重构像的周期性抑制零级衍射斑的应用. 所有理论与实验研究结果完全一致.
关键词:
数字全息
图像周期性
零级斑抑制 相似文献
13.
14.
15.
We present a new implementation capable of producing two-dimensional (2D) superresolution (SR) imaging in a single exposure by aperture synthesis in digital lensless Fourier holography when using angular multiplexing provided by a vertical cavity surface-emitting laser source array. The system performs the recording in a single CCD snapshot of a multiplexed hologram coming from the incoherent addition of multiple subholograms, where each contains information about a different 2D spatial frequency band of the object's spectrum. Thus, a set of nonoverlapping bandpass images of the input object can be recovered by Fourier transformation (FT) of the multiplexed hologram. The SR is obtained by coherent addition of the information contained in each bandpass image while generating an enlarged synthetic aperture. Experimental results demonstrate improvement in resolution and image quality. 相似文献
16.
为了提高数字全息图的重建速度和精度,本文提出了一种基于同态信号处理的数字全息广义线性重建算法. 首先利用预放大数字全息显微系统并结合同态信号处理原理进行了理论分析,得到了广义线性重建算法的实现条件及重建步骤,并对该算法的优点进行了分析;然后利用计算机模拟和实验相结合的方法对理论分析进行了验证. 结果表明:数字全息广义线性重建算法不仅可以有效的消除全息图频谱中零级项的干扰,实现高精度再现,而且由于采用一个完整象限的固定区域滤波,避免了常规线性算法的手动滤波操作,极大地提高了重建速度,同时最大限度地保留了原始像中的高频成分,实现全息图的高分辨重建.
关键词:
数字全息显微术
同态信号处理
傅里叶变换
分辨率 相似文献
17.
对多波长数字全息图的记录和再现像的彩色显示问题进行了研究.从菲涅耳近似算法出发,对在记录距离一定情况下,不同波长全息图数字再现像的像元所表示的几何尺寸会因波长不同而不同,从而导致各波长再现像无法重合的情况进行了讨论.通过理论分析,讨论了不同波长全息图像素数与再现像像元之间的关系、不同波长全息图记录距离与再现像像元之间的关系,据此得出的解决不同波长再现像重合问题的方法及其对再现像的影响和适用范围等问题;并对合成再现像中原始色彩信息改变及其解决办法进行了分析.通过无透镜傅里叶变换数字全息方法,以632.8 nm和532.0 nm两种波长的激光为光源,用单色CCD进行记录,验证了方法的可行性. 相似文献
18.
19.
A method to induce phase shifting in lensless Fourier of digital holography system is presented. In this method, by computer simulation and theoretical analysis on the technology to eliminate the influence of zero-order diffraction in force, it can be found that, a reference light induced in a random non-2π integral number of phase shifting shooting to get the second hologram, and wave reconstruction can be got by the difference value image of the two holograms. And, the method of different digital holography record system with different phase shifting should be used. In this paper, theoretical analyses have been done in detail to discuss the problems that exist in the unsuitable phase-shifting methods. Furthermore, some experiments have been done to prove the reliability of this method. This method can significantly improve the image quality and give better resolution of the reconstructed image. 相似文献
20.
为了提高数字全息相位重建精度,研究了基于Hilbert变换重建相位的理论和方法,并通过像面数字全息实验对该方法的有效性进行了验证,同时与数字全息常规重建方法得到的结果进行了比较.结果表明:Hilbert变换本身具有消除直流项的作用,对利用频域滤波滤除零级谱后的全息图进行Hilbert变换,能够彻底消除零级衍射项的干扰,从而提高相位重建精度.与常规重建结果相比,基于Hilbert变换的相位重建结果的标准偏差降低了14.0%.本文结果对提高数字全息相位重建精度具有重要的指导意义. 相似文献