壳层相关的CdSe核/壳量子点发光的热稳定性

测量了CdSe/ZnS(3 ML)核/壳结构及CdSe/CdS(3 ML)/ZnCdS(1 ML)/ZnS(2 ML)核/多壳层结构量子点在80~460 K范围内的光致发光光谱,研究了壳层结构对CdSe量子点发光热稳定性的影响。详细地分析了CdSe量子点的发光峰位能量、线宽和积分强度与温度之间的关系,发现CdSe量子点的发光热稳定性依赖于壳层结构。CdS/ZnCdS/ZnS多壳层结构包覆CdSe量子点在低温和高温部分的热激活能均大于ZnS壳层包覆的CdSe量子点,具有更好的发光热稳定性。此外,在300-460-300 K加热-冷却循环实验中,CdS/ZnCdS/ZnS多壳层结构包覆CdSe量子点的发光强度永久性损失更少,热抵御能力更强。     

谷胱甘肽包被的CdSe/CdS量子点的直接水相制备及其对人血淋巴细胞的标记成像

首次用谷胱甘肽(GSH)作为稳定剂,在水溶液中制备了稳定地发射绿色荧光和橙色荧光的两种 CdSe/CdS核/壳结构的纳米量子点。用紫外-可见分光光度和荧光光谱方法研究了CdSe/CdS量子点的发光特性。透射电镜(TEM)结果表明CdSe/CdS量子点近似球形,在水中分散性良好,比CdSe量子点具有更优异的发光特性,发射光谱和吸收光谱都有红移现象。将CdSe/CdS量子点与鼠抗人CD3抗体连接,制备了水溶性CdSe/CdS-CD3复合物探针,对人血淋巴细胞进行标记和成像。结果表明用该探针对人血淋巴细胞成像清晰,其荧光在30 min的连续蓝光激发下无明显衰退,而FITC荧光在20 min内基本完全猝灭。     

水溶胶CdSe/CdS核/壳结构纳米晶制备及光学性质的研究

以巯基乙酸为稳定剂在水溶液中合成了水溶胶CdSe/CdS核/壳结构的量子点,利用X射线粉末衍射(XRD)和X射线光电子能谱(XPS)对量子点结构进行了表征;并对化学组成和尺寸分布进行了研究。通过紫外-可见吸收光谱、激发光谱与发射光谱研究了它们的发光特性。     

脂溶性CdSe/ZnS量子点脂质体复合物的制备及表征

在油相中成功合成了脂溶性CdSe/ZnS核壳量子点纳米粒,粒径平均为4.5 nm,量子产率达29%,发射波长为540 nm。通过薄膜分散法,以蛋黄卵磷脂、胆固醇为膜材,将脂溶性的CdSe/ZnS核壳量子点包覆于脂质体磷脂双分子层中,由于磷脂分子的两亲性,使得脂溶性的CdSe/ZnS核壳量子点同时又具有亲水性。通过透射电镜对脂质体形态进行了表征,倒置荧光显微镜证实了发光CdSe/ZnS核壳量子点成功包埋于脂质体双分子层中,包裹的发光CdSe/ZnS核壳量子点具有更稳定的发光及抗光漂白性质。     

CdSe/CdS/ZnS量子点光纤的增益研究

采用油相法合成了CdSe/CdS/ZnS量子点,相对于CdSe量子点,其吸收光谱、发射光谱均发生了红移。利用COMSOL Multiphysics软件模拟CdSe/CdS/ZnS量子点光纤和甲苯光纤的电场分布,结果表明CdSe/CdS/ZnS量子点光纤的电场强度高于甲苯光纤。采用中心波长为532 nm的稳态半导体激光器作为光源,对甲苯光纤、CdSe/ZnS量子点光纤、CdSe/CdS/ZnS量子点光纤进行电压信号测试,发现CdSe/ZnS量子点光纤和CdSe/CdS/ZnS量子点光纤的电压信号值相对于甲苯光纤电压信号值分别增强了6.28 mV和18.43 mV,表明双壳型量子点光纤的增益高于单壳型量子点。     

HgTe/CdS/ZnS多壳层量子点的制备与表征

采用一种简单的方法合成HgTe/CdS/ZnS多壳层量子点。首先,以1-硫代甘油为稳定剂,在水相溶液中制备出HgTe核量子点;然后,采用外延生长法依次在HgTe核量子点表面包覆CdS和ZnS壳层,合成出最终具有稳定近红外发光的HgTe/CdS/ZnS多壳层量子点。该合成方法仅需3个步骤,具有操作简单、成本低廉的优点。实验结果显示,当反应温度为90 ℃、反应溶液pH为11.0、反应加热回流时间为4 min时,HgTe/CdS/ZnS多壳层量子点具有最高荧光量子产率36%。     

CdSe/ZnSe/ZnS多壳层结构量子点的制备与表征

展示了一种简捷的多壳层量子点合成路线。在含有过量Se源的CdSe体系中直接注入Zn源,"一步法"合成了CdSe/ZnSe量子点;进一步以CdSe/ZnSe为"核",表面外延生长ZnS壳层制备了核/壳/壳结构CdSe/ZnSe/ZnS量子点。相对于以往报道的多壳层结构量子点的制备方法,该方法通过减少壳层的生长步骤有效地简化了实验操作,缩短了实验周期,同时减少对原料的损耗。对量子点进行高温退火处理,能够大幅提高CdSe/ZnSe/ZnS量子点的发光量子产率。透射电镜、XRD以及光谱研究表明:所制备的量子点接近球形,核与壳层纳米晶均为闪锌矿结构,最终获得的CdSe/ZnSe/ZnS量子点的光致发光量子产率达到53％。为了实现量子点的表面生物功能化,通过巯基酸进行了表面配体交换修饰,使量子点表面具有水溶性的羧基功能团,并且能够维持较高的光致发光量子产率。     

单核/双壳结构CdSe/CdS/ZnS纳米晶的合成与发光性质

以巯基乙酸为稳定剂,在水溶液中合成了单核/双壳结构的CdSe/CdS/ZnS纳米晶。在内核CdSe和外壳ZnS之间的内壳CdS作为晶格匹配调节层,能够很好的改善核/壳界面处的性能,而且,最外层ZnS能够最大程度地使激子受限。用TEM和XPS对纳米晶进行了表征,并且用光致发光光谱和吸收光谱对不同核壳结构的纳米晶的发光性能进行了比较,结果表明单核/双壳结构的纳米晶具有更加优异的发光特性。     

基于量子点荧光粉白光LED的发光特性和稳定性研究

基于量子点荧光粉白光发光二极管（WLED）是由蓝色GaN芯片和发红光及绿光的CdSe／CdS／ZnS量子点（QDs）组成。因为CdSe量子点的发射波长可在510~620nm之间调节,导致了其色坐标和色差的可变。采用的CdSe量子点是在制备无机前驱体和非配位溶剂的基础上通过合成方法得到的。实验证实温暖和寒冷白光辐射是由于色温在40009000K区间变化;不同的偏置电压导致了颜色坐标的变化,增加工作时间在90min内对白光发射的稳定性进行分析得到稳定光谱。     

基于CuInS2/ZnS核壳结构量子点的高光效暖白光LED

采用逐步热注射法合成了用于白光LED的CuInS₂/ZnS(CIS/ZnS)核壳结构量子点.通过调整Cu/In的比率, 在CuInS₂(CIS)量子点的基础上, 合成了发射波长在570~650 nm之间可调的CIS/ZnS量子点.与CIS量子点的低量子产率相比, 具有核壳结构的CIS/ZnS量子点的量子产率达到了78%.通过在黄光荧光粉YAG :Ce³⁺表面旋涂CIS/ZnS量子点的方式制备了暖白光LED器件.在工作电流为10 mA时, 暖白光LED的发光效率达到了244.58 lm/W.由于CIS/ZnS量子点的加入, 所制备的白光LED器件的显色指数达到86.7且发光颜色向暖色调发生了转移, 相应的色坐标为(0.340 6, 0.369 0).     

Evolution of Luminescence with Shell's Thickness in Colloidal CdSe/CdS Core/Shell Quantum Dots

We synthesize colloidal CdSe/CdS core/shell quantum dots with different shell thicknesses, and there are five samples including CdSe core dots, and CdSe/CdS core/shell dots with 1-4 CdS layers. X-ray diffraction and Raman measurements indicate that the stress in CdSe core becomes stronger with the increasing shell thickness, and the optical measurements show that when the shell becomes thicker, the photoluminescence quantum yield is enhanced, and the radiative decay is also expedited. The temperature-dependent optical spectra are measured. The relation between the microstructure and the optical properties is discussed.     

Dendronization of gold and CdSe/cdS (core-shell) quantum dots with tomalia type, thiol core, functionalized poly(amidoamine) (PAMAM) dendrons

Poly(amidoamine) (PAMAM) dendrimers containing disulfide cores (i.e., cystamine) and possessing carboxylic acid or hydroxyl terminal groups were reduced with dithiothreitol (DTT) to yield single site, thiol core, functionalized PAMAM dendron reagents. These thiol functionalized dendron reagents were used to surface modify (dendronize) both gold nanoparticles, as well as CdSe/CdS (core-shell) quantum dots (QDs). Dendronization involved self-assembly of the focal point thiol functional dendrons at the metal interface of both gold and CdSe/CdS QDs by ligand exchange of protective surfactants used for their synthesis. The synthesis, characterization and preliminary luminescence studies of these new dendritic hybrids are reported.     

CdSe/CdS/ZnS 量子点体系中的超快载流子动力学

利用飞秒泵浦探测技术对CdSe/CdS/ZnS量子点体系中的超快载流子动力学过程进行了研究. 通过选择不同波长的泵浦光分别激发样品壳层和核层,研究了载流子在壳层和核层中的超快动力学过程. 实验结果表明,载流子在CdS壳层导带中弛豫过程非常迅速(约130 fs),时间明显短于载流子在CdSe核层导带中的弛豫时间(约400 fs). 实验中也发现在CdS壳层和CdSe核层的分界面存在一定量的缺陷态.     

Synthesis and characterization of water-soluble, stable and highly luminescent itaconic acid/methacrylic acid copolymer-coated CdSe/CdS quantum dots

The itaconic acid/methacrylic acid (PIA-MAA) copolymer ligand (PIA-MAA) with carboxylate anchoring groups was found to efficiently convert CdSe/CdS core-shell quantum dots (QDs) in chloroform to water-soluble PIA-MAA-ligand stabilized nanocrystals (PIA-MAA-QDs). The quantum yield (QY) of the resulting PIA-MAA-QDs was 24%. In addition, the carboxylate-based PIA-MAA-QDs survived UV irradiation in air for at least 16 days. Upon UV irradiation, the PIA-MAA-QDs became about 2 times brighter than the original CdSe/CdS QDs in chloroform, and the UV-brightened photoluminescence (PL) can retain the brightness for at least several months. Experimental results further confirmed that the PIA-MAA-QDs were more stable than the original CdSe/CdS QDs against strong acid, strong oxidant, photochemical and thermal treatments. The PIA-MAA-QDs were soluble and stable in water, some polar solvents and buffer solutions. In addition to good performance of PIA-MAA-QDs, the synthesis of PIA-MAA ligands and the corresponding water-soluble QDs is relatively simple.     

Modification of spontaneous emission from CdSe/CdS quantum dots in the presence of a semiconductor interface

The spontaneous-emission lifetime of CdSe/CdS core-shell quantum dots was studied as a function of the distance between the dots and a polished Si surface. The experimental results reveal a significant modification of the spontaneous-emission rate of the quantum dots by the Si surface.     

Photoluminescence quenching of CdTe/CdS core-shell quantum dots in aqueous solution by ZnO nanocrystals

Photoluminescence (PL) properties of 3-mercaptopropionic acid (MPA) coated CdTe/CdS core-shell quantum dots (QDs) in aqueous solution in the presence of ZnO colloidal nanocrystals were studied by steady-state and time-resolved PL spectroscopy. The PL quenching of CdTe/CdS core-shell QDs with addition of purified ZnO nanocrystals resulted in a decrease in PL lifetime and a small red shift of the PL band. It was found that CdTe(1.5 nm)/CdS type II core-shell QDs exhibited higher efficiency of PL quenching than the CdTe(3.0 nm)/CdS type I core-shell QDs, indicating an electron transfer process from CdTe/CdS core-shell QDs to ZnO nanocrystals. The experimental results indicated that the efficient electron transfer process from CdTe/CdS core-shell QDs to ZnO nanocrystals could be controlled by changing the CdTe core size on the basis of the quantum confinement effect.     

巯基丙酸分子对CdSe核壳量子点和 ZnO纳米粒子薄膜之间电荷转移的影响

通过稳态光谱和时间分辨荧光光谱研究了巯基丙酸(MPA)分子对由量子点到ZnO纳米粒子薄膜的电荷转移过程的影响。研究发现,相对于CdSe纳米粒子薄膜样品,没有MPA分子参与作用的CdSe/ZnO薄膜样品和有MPA分子连接的CdSe/MPA/ZnO薄膜样品中都存在从CdSe量子点到ZnO纳米粒子薄膜的有效电荷分离过程,但是相对于CdSe/ZnO样品, CdSe/MPA/ZnO样品中电荷转移速率明显变小。这表明MPA分子本身它并不能促进CdSe到ZnO电荷分离过程,因此可以认为用金属氧化物薄膜直接吸附量子点吸收材料,将能获得高功率转换效率的量子点敏化太阳能电池。     

Effect of the Semiconductor Quantum Dot Shell Structure on Fluorescence Quenching by Acridine Ligand

The main line of research in cancer treatment is the development of methods for early diagnosis and targeted drug delivery to cancer cells. Fluorescent semiconductor core/shell nanocrystals of quantum dots (e.g., CdSe/ZnS) conjugated with an anticancer drug, e.g., an acridine derivative, allow real-time tracking and control of the process of the drug delivery to tumors. However, linking of acridine derivatives to a quantum dot can be accompanied by quantum dot fluorescence quenching caused by electron transfer from the quantum dot to the organic molecule. In this work, it has been shown that the structure of the shell of the quantum dot plays the decisive role in the process of photoinduced charge transfer from the quantum dot to the acridine ligand, which is responsible for fluorescence quenching. It has been shown that multicomponent ZnS/CdS/ZnS shells of CdSe cores of quantum dots, which have a relatively small thickness, make it possible to significantly suppress a decrease in the quantum yield of fluorescence of quantum dots as compared to both the classical ZnS thin shell and superthick shells of the same composition. Thus, core/multicomponent shell CdSe/ZnS/CdS/ZnS quantum dots can be used as optimal fluorescent probes for the development of systems for diagnosis and treatment of cancer with the use of anticancer compounds based on acridine derivatives.