杂质对Nb2GeC性质影响的第一性原理研究

为进一步研究Nb₂GeC在辐照环境中的稳定性, 本文研究了O, H和He杂质在Nb₂GeC中的稳定情况. 所有杂质的研究都是从替代和间隙两个方面来进行的, 计算得到了替代和间隙的形成能, 存在替代和间隙时Nb₂GeC的晶格常数, 以及单胞体积, 并且与完美的晶胞进行了比较. 此外, 通过电荷密度分布和Mulliken 布居, 分析了O, H, He杂质对Nb₂GeC 的电子性质的影响.     

Atomic and Electronic Structures of Intrinsic Defects in Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>: Ab Initio Simulation

The atomic and electronic structure of intrinsic point defects in orthorhombic tantalum oxide has been studied by numerical simulation within the density functional theory. It has been shown that all defects responsible for metal enrichment of Ta₂O₅ serve as electron and hole traps. Under conditions of strong oxygen depletion and at a metal–insulator interface, which are characteristic of resistive memory elements, interstitial tantalum atoms compete with an oxygen vacancy in the formation of a conducting filament. Interstitial oxygen atoms are not involved in charge transport. Tantalum substituting oxygen can be considered as a combination of the oxygen vacancy and interstitial tantalum. The analysis of the calculated thermal and optical energies of trap ionization shows that the oxygen vacancy is a key defect for charge transport in Ta₂O₅.     

Be,Mg,Mn掺杂CuInO_2形成能的第一性原理研究

研制开发新型的光电材料对促进社会经济发展具有重要的科学意义和实用价值.利用宽禁带CuInO_2铟基材料实现全透明光电材料是目前深入研究的热点.通过基于密度泛函的第一性原理计算方法,本文计算出掺杂元素Mg, Be, Mn在CuInO_2的形成能.计算结果表明,施主类缺陷(如掺杂元素替代Cu原子或进入间隙位置)由于较高的形成能和较深的跃迁能级,很难在CuInO_2材料中出现N型导电;而受主缺陷中,在氧原子化学势极大的情况下, Mg原子替代In能成为CuInO_2理想的受主缺陷.计算结果可为制备性能优异的CuInO_2材料提供指导.     

Oxygen self-diffusion in alpha-quartz

We have studied the formation energy of the simplest oxygen defects in alpha-quartz, the oxygen vacancy and interstitial, by an ab initio approach based on density functional theory in the local density approximation. We have determined the formation energies and entropies and the migration paths and energies. From our results we can conclude that oxygen diffuses in quartz by an interstitial mechanism: the interstitial has a dumbbell structure; one of the constitutive atoms jumps towards a neighboring oxygen site. The activation energy amounts to 4.7 eV in the intrinsic regime and 2.8 eV in the extrinsic regime.     

(Ga,Mn)As 体系中Mn自补偿效应的第一性原理研究

基于密度泛函理论的赝势平面波方法计算了处于填隙位置磁性原子(MnI)对(Ga,Mn) As体系电子结构和磁性的影响. 计算结果表明MnI在GaAs中是施主；代替Ga位的MnGa 与MnI的自旋按反铁磁序排列；静电相互作用使MnGa，MnI倾向于形成MnGa_MnI对. MnI的存在一方面补偿了(Ga,Mn)As中的空穴，降低了空穴浓度；同时还使邻近的MnG a失活. MnI的存在对获得高居里温度的(Ga,Mn)As是极为不利的. 关键词： (Ga Mn)As 稀磁半导体 密度泛函理论     

Formation energies and swelling of uranium dioxide by point defects

Hybrid density functional theory is used to study the stability and behavior of rare gases in uranium dioxide. Three insertion sites are considered: the octahedral interstitial position and the oxygen and uranium substitution sites. The optimized lattice constant, the volume variation induced by gaseous atom incorporation, and the defect formation energy are studied for each rare gas. Both lattice constants and formation energies increase with increase in radii of the rare gases. The octahedral interstitial position is the most favorable occupation site. The formation energy is found to be negative only for He at an interstitial site.     

Effects of Cr and V impurities on cohesion properties of Pd/TiAl interfaces

First principles calculations reveal that for Pd/TiAl interfaces the substitution of interface Ti atoms with Cr or V atoms is energetically favorable with negative heat of formation, and could bring about a very small increase of interface bond strength, while the interstitial Cr and V atoms should be unfeasible with highly positive heat of formation and would increase the bond lengths of interface Pd–Al and Pd–Ti bonds. Calculations also demonstrate that both Cr and V would induce an increase of interface energy, suggesting that the impurity atoms of Cr or V should be reduced to a minimum level, in order to get a thermally stable Pd/TiAl interface with a longer lifetime. In addition, it is found that the substitution of V at the Pd/TiAl interfaces should be much easier than that of Cr, which is in good agreement with similar experimental observations in the literature.     

第一原理研究Mn掺杂LiNbO3晶体的磁性和光吸收性质

采用基于密度泛函理论和局域密度近似的第一性原理分析了Mn掺杂LiNbO₃晶体的结构, 磁性, 电子特性和光吸收特性. 文中计算了Mn占据Li位和Nb位体系的形成焓, 对应的形成焓分别为-8.340 eV/atom和-8.0062 eV/atom, 也就意味着Mn 原子优先占据Li位. 这也就意味着Mn原子占据Li位的掺杂LiNbO₃晶体结构更稳定. 磁性分析的结果显示, 其对应磁矩也比占据Nb位的高. 进一步分析磁性的来源, 自旋态密度结果显示: Mn掺杂LiNbO₃晶体的磁性主要源于掺杂原子Mn, Mn原子携带的磁矩高达 4.3 μ_B, 显示出高自旋结构. 由于Mn-3d与近邻O-2p及次近邻Nb-4d 轨道的杂化作用, 计算表明: 诱导近邻O原子及次近邻Nb原子产生的磁矩对总磁矩的贡献较小. 通过光学吸收谱的分析, 得出在可见光区Li位被Mn原子替代以后显示出更好的光吸收响应相比于Nb位. 本文还分析了O空位对于LiNbO₃晶体磁性与电子性质的影响, 结果显示O空位的存在可以增加Mn掺杂LiNbO₃体系的磁性.     

Ti原子与氮掺杂金刚石(001) 界面结合强度的第一性原理研究

摘 要：金属钛原子在金刚石表面的结合强度直接影响金刚石真空介电窗口的使用性能和寿命. 本文通过基于密度泛函理论的第一性原理方法研究了Ti原子与不同氮掺杂位置的金刚石（001）界面的结合能、电荷分布和稳态几何结构. 结果表明：Ti原子与N原子取代掺杂在第二层C原子处金刚石表面的结合能比未掺杂和掺杂在第三层的结合能都高,达到-7.293 eV,使得金刚石表面形成的界面结构更加稳定,结合强度更好;通过电荷分布分析,N原子掺杂在第二层金刚石表面的Ti原子上的电荷转移最明显,对金刚石表面碳原子吸附最强,也具有更好的结合强度. 与未掺杂金刚石表面形成的Ti-C键键长相比,N掺杂在第二层和第三层C原子处金刚石表面形成的Ti-C键键长比前者分别长0.051 Å和0.042 Å,略有增加.     

LiNH2储氢材料中间隙H与掺杂原子交互作用对其释氢性能影响机理研究

采用基于密度泛函理论的赝势平面波第一性原理方法,研究了LiNH₂缺陷及其掺杂原子交互作用对其释氢影响.通过对其进行优化求得它们的局域最稳定结构并计算了含间隙H原子缺陷的LiNH₂及其掺杂合金的结合能、间隙缺陷形成能、态密度和电荷布居.结果表明: 系统结合能不能反映LiNH₂及其掺杂合金的释氢性质;平衡时,LiNH₂中有一定的间隙氢原子存在,Mg,Ti掺杂使形成能大大降低,大大增大了间隙氢的浓度. 间隙H原子在带隙引入了缺陷能级使带隙大大减小,提高释氢能力.间隙H原子导致[NH₂]^-中N-H原子间相互作用减弱,容易释氢.间隙H与[NH₂]^-中N存在共价作用,可以解释LiNH₂释氢反应中NH₃的放出.当存在掺杂时,N-H键的键强不均衡,部分较弱,部分较强,较弱的N-H键中H容易放出. 关键词： 储氢材料 第一性原理 缺陷 释氢机理     

Structures of thermal double donors in silicon

Accurate total-energy calculations are used to study the structures and formation energies of oxygen chains as models for thermal double donors (TDD's) in Si. We find that the first three TDD's (TDD0-TDD2) consist of one four-member ring, with one or two adjacent interstitial O atoms. These metastable TDD's form bistable negative-U systems with the corresponding stable, electrically inactive staggered structures. The TDD3-TDD7 structures are found to consist of four-member rings with adjacent interstitial O atoms at both ends. The TDD's with a central "di-Y-lid" core are found to become energetically competitive with the four-member ring TDD's only for clusters larger than ten O atoms.     

Ferromagnetism induced by intrinsic defects and nitrogen substitution in SnO2 nanotube

The possibilities of magnetism induced by intrinsic defects and nitrogen substitution in (5,5) single-wall SnO₂ nanotube are investigated by ab initio calculations. The calculated results indicate that a stoichiometric SnO₂ nanotube is nonmagnetic. The tin (Sn) vacancy can induce the magnetic moments rather than oxygen vacancy, which is originated from the polarization of O 2p electrons. A couple of tin vacancies can lead to the ferromagnetic coupling. A nitrogen substitution for oxygen also produces magnetic moments. When substituting two nitrogen atoms, the characteristics of exchange coupling depend upon the distance of two nitrogen atoms. The longer distance of two nitrogen atoms prefers the ferromagnetic coupling, whereas the short distance leads to the antiferromagnetic coupling.     

GaN中与C和O有关的杂质能级第一性原理计算

用局域密度泛函线性丸盒轨道大型超原胞方法(32个原子),对纯纤锌矿结构的GaN用调节计算参数(如原子球与“空球”的占空比)在自洽条件下使Eg的计算值(323eV)接近实验值(35eV).然后以原子替代方式自洽计算杂质能级在Eg中的相对位置.模拟计算了六角结构GaN中自然缺陷以及与C和O有关的杂质能级位置,包括其复合物.计算结果表明,单个缺陷如镓空位VGa、氮空位VN、氧代替氮ON、炭代替氮CN、炭代替镓CGa等与已有的计算结果基本一致.计算结果表明杂质复合物会导致单个杂质能级位置的相对变化.计算了CNON,CGaCN,CNOV和CGaVGa,其中CNON分别具有深受主与浅施主的特征,是导致GaN黄光的一种可能的结构. 关键词： GaN 杂质能级 电子结构     

铝中氦原子行为的密度泛函研究

用密度泛函理论计算了大量He原子存在时He在金属铝中不同位置的能量,并在理论上预测了铝中的氦原子行为。结果表明,铝晶胞内He原子择优占位区是空位,而在整个晶体范围,最有利于容纳He原子的区域是晶界,其次是空位和位错。在fcc-铝的两种间隙位中,He原子优先充填四面体间隙位。间隙He原子的迁移能很小,易于通过迁移在晶内聚集,或被空位、晶界、位错等缺陷束缚。     

铝中氦原子行为的密度泛函研究

用密度泛函理论计算了大量He原子存在时He在金属铝中不同位置的能量,并在理论上预测了铝中的氦原子行为.结果表明,铝晶胞内He原子择优占位区是空位,而在整个晶体范围,最有利于容纳He原子的区域是晶界,其次是空位和位错.在fcc-铝的两种间隙位中,He原子优先充填四面体间隙位.间隙He原子的迁移能很小,易于通过迁移在晶内聚集,或被空位、晶界、位错等缺陷束缚.     

Exploration the p-type doping mechanism of GaAs nanowires from first-principles study

Using first-principle calculations, we present a systematic investigation upon the influence of p-type doping on the structural and electronic properties of H-passivated GaAs nanowires with wurtzite structure. The GaAs nanowire models of different doping types, different doping elements, different doping positions and different doping concentrations are established. The calculated formation energies show that Zn element becomes more competitive or even slightly favored in realizing p-type doping compared to Be element. For an individual Zn incorporation model, Zn atom tends to substitute the subsurface Ga atom. As increasing Zn doping concentration, the p-type doping process becomes more and more difficult. Besides, both interstitial and substitutional doping lead to the distortion of atomic structure near impurity atoms and cause the ionicity of GaAs nanowires enhanced. The p-type doped GaAs nanowires models are all direct band gap semiconductors. After substitutional doping, the total density of state curves shift toward higher energy sides and the Fermi level entering valence bands. Our calculations provide a significant reference for the preparation of p-type doping GaAs nanowire, which has a promising potential application in the field of photocathodes.     

Element segregation on the surfaces of pure aluminum foils

The surface segregation trend of trace elements in pure aluminum foils was investigated by density functional theory. The model of nine-layer Al(1 0 0) slab substituted partially by trace element atoms was proposed for calculating surface segregation energy. The calculating results show that (i) B, Mg, Si, Ga, Ge, Y, In, Sn, Sb, Pb and Bi exhibit negative segregation energy and possibly move to the surface, while Be, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zr exhibit positive segregation energies and migrated into the bulk; (ii) the segregation energy was found to be related with the covalent radius, the relaxed position at the surface of the substituting atom and the surface energy; (iii) the segregation behavior of trace element generates lots of defects and dislocation, which can increase the initial pitting nucleation sites in the surface of aluminum foils; (iv) the impurity atom concentration was tested with Pb-doped surfaces, the calculated negative segregation energies in all coverage increases rapidly with the Pb coverage. These conclusions are helpful for designing of the chemical composition and to advance the tunnel etching of aluminum foils.     

Energy of substitution of atoms in the epitaxial graphene-buffer layer-SiC substrate system

The binding energy of atom X (X = B, Al, Ga, In, N, P, As, Sb) substituting for carbon atoms in single-layer graphene, a buffer layer, and on the ( 000[`1] )\left( {000\bar 1} \right) surface of SiC substrate or for a silicon atom on the (0001) surface of SiC substrate has been studied by the Harrison bond-orbital method. In terms of a simple model based on atomic radii, the contribution of the strain energy due to relaxation of an impurity bond has been considered. The expressions have been obtained for the difference between the energies of substitution for a carbon atom in the buffer layer and in single-layer graphene and in the case of substitution for silicon and carbon atoms on the SiC-substrate surface.     

氧原子在Zr(0001)表面附近的扩散

在密度泛函理论计算的基础上,利用微动弹性带（nudged elastic band）方法研究了氧原子在Zr（0001）表面附近的扩散.首先计算了氧原子从稳定的表面面心立方（SFCC）位置向表面六角密排位置的扩散激活能（0.77 eV）;然后计算了氧原子从稳定的SFCC位置扩散到表面下第1层与第2层之间的八面体间隙位置,再继续向表面下第2层与第3层之间的八面体间隙位置扩散的激活能,在此过程中氧原子需克服两个能垒,其激活能分别为2.14和2.57 eV.结果表明,氧原子在Zr（0001）表面上方的扩散比较容易,而氧原子向Zr（0001）表面下的扩散相对较难. 关键词： Zr（0001）表面 微动弹性带 氧的扩散     

(GaMn)As体系中Mn无序对其电子结构及磁性影响的第一性原理研究

关键词：