首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到16条相似文献,搜索用时 78 毫秒
1.
利用电流丝模型对SUNIST球形托卡马克等离子体边界重构进行了模拟计算。结果表明,用电流丝模型能够比较好地对等离子体自由边界进行快速识别,与EFIT平衡计算的边界径向平均误差小于6mm。  相似文献   

2.
在电流丝模型对HL-2A装置等离子体边界重建取得满意结果[3]、[5]的基础上,本文用有限电流元模型对HL-2A等离子体边界进行了重建研究。计算和实验结果表明,在通常情况下,有限电流元模型比固定电流丝模型的重建误差稍小,前者误差小于3mm,后者误差小于6mm。当部分有限电流元分布在等离子体边界之外时,用有限电流元模型仍然可以成功重建边界。有限电流元的位置在一定范围内变化时,重建的误差都很小。用普通奔腾4 2.4GHz PC机计算一组等离子体放电边界的时间不超过1ms。有限电流元法能准确而快速地识别等离子体的偏滤器位形,这对于HL-2A装置的实时位形控制是基本和重要的。  相似文献   

3.
利用等离子体外部测量的磁场信号,使用丝电流方法对HL-2A等离子体边界进行了快速识别。介绍了该方法的原理、相关的测量系统配置和该程序的研制进展。对识别结果进行了讨论。  相似文献   

4.
1引言 我们已经用固定电流丝模型和有限电流元模型编写的CF编码研究了HL-2A装置在孔栏位形和偏滤器位形等离子体边界的重建问题。与其它等离子体边界重建的方法相比,这种方法能够快速和准确地确定等离子体边界。但是对于实时控制等离子体位置来说,这需要采用快速的计算机硬件或采用DSP数字信号处理器。在2005年的试验中,我们修改了CF编码不再计算等离子体边界,通过计算4点磁通来计算等离子体的位置,这样可以明显减少计算时间,实时确定等离子体的位置。  相似文献   

5.
游天雪  袁保山  李芳著 《物理学报》2007,56(9):5323-5329
根据Shafranov电流密度矩理论,给出了用可移动电流丝方法重建HL-2A装置等离子体边界的具体计算方法,研究了用可移动电流丝方法(VCF法)重建边界的可行性.VCF法与固定电流丝方法(FCF法)和有限电流元法(FCE法)相比,最大的优点就是用1—3个可移动电流丝就可以准确地重建位置和小半径快速变化的等离子体位形,这正好弥补了FCF法的不足.将可移动电流丝方法和FCF法相结合,可以实现全程等离子体放电的边界实时显示和等离子体的位形控制. 关键词: 可移动电流丝方法 边界识别  相似文献   

6.
为了适应超导托卡马克装置EAST位形控制运行模式的需要,研究了等离子体放电位形快速识别算法,给出了等离子体放电位形重建的模拟计算结果,并与美国GA平衡反演程序EFIT计算的平衡结果进行了详细的误差对比分析.结果表明,通过外部磁测量和合适的电流剖面模型,并结合实时平衡重建算法可以快速地对EAST等离子体放电位形进行识别. 关键词: 托卡马克 等离子体 平衡重建 数值模拟  相似文献   

7.
HL-2A等离子体边界识别的研究   总被引:2,自引:1,他引:1  
利用电流丝模型编写的电流丝编码和采集到的18个磁探针测量数据、等离子体电流和极向场线圈电流的数据做了重建HL-2A等离子体边界的研究。计算结果表明,电流丝编码能够正确地识别等离子体的边界、偏滤器位形和X点的位置。计算获得的偏滤器内外靶板上打击点出现和消失的时间与布置在偏滤器靶板上静电探针测量到的信号很好地符合。在Pentium 4的PC个人计算机上(CPU为2.4GHz, 800MHz总线)计算每一个时刻的等离子体边界时间小于1ms。  相似文献   

8.
HL-2A等离子体形状实时显示系统   总被引:2,自引:0,他引:2       下载免费PDF全文
为了研究HL-2A等离子体偏滤器位形,研制了等离子体形状实时显示系统. 采用固定位置电流丝和有限电流元的方法编写了CF编码. 采用32道同时刻采集器UA301采集等离子体周围的磁场信息,使用P4 3GHz E CPU组装的兼容计算机处理数据. 这个系统每4ms采集一次数据并存盘,每16ms重画一次等离子体边界. 放电结束后可以详细地计算等离子体边界及其磁场以及由此导出的等离子体参数. 关键词: 等离子体平衡重建 边界识别 实时显示  相似文献   

9.
HL-2A等离子体边界识别的模拟研究   总被引:5,自引:5,他引:0  
采用电流丝模型对HL-2A等离子体边界重建做了模拟计算。结果表明,对于孔栏位形、双零位形和下单零位形,重建的等离子体边界与平衡计算的边界能很好地吻合,最大径向距离小于8mm。  相似文献   

10.
JT-60U装置上的FBI程序是运行于UNIX操作系统下综合的等离子体参数计算系统,该程序已在HL-2A装置上采用了,其主要计算模块的功能是使用等离子体边界外的电磁测量信号,利用丝电流方法识别等离子体边界。程序引进时最大程度地考虑了两个装置电磁测量系统、装置尺寸结构和线圈系统的不同而进行了修改。  相似文献   

11.
The amplitudes of the waves radiating at combination frequencies from the plasma boundary due to nonlinear interaction of surface waves with radiation incident on a narrow inhomogeneous plasma layer, are determined. The method used allows for the discontinuity at the plasma boundary of the tangential components of the electric field of the wave at the combination frequencies.  相似文献   

12.
A method is derived for inferring the point-wise current density given the shape of the outer plasma boundary ?i neds and ?i neB?d?s, where ne is the electron density, d?s is an increment of path length, and B? is the magnetic field strength. The i is an index for the several integral traverses that are required. The integral quantities are assumed to be obtainable from far infrared (FIR) interferometer/polarimeter measurements [1], and the outer plasma boundary shape could be obtained from plasma loop probe measurements [2]. The method obtains a current density distribution that is consistent with ? . B? = 0, ? × B? = ? j?, assuming that the ne contour lines follow the B-field lines [3], [4], as well as the measured line integrals, and the measured outer plasma boundary shape. If they are available, other experimental data can also be incorporated into the analysis method. A set of data from the TEXTOR tokamak reported by Soltwisch [3] is analyzed by the method, and the results are discussed.  相似文献   

13.
A new improvement method of Abel inversion is presented for application in asymmetrical measured value that is obtained from plasma diagnostics on the toroidal plasma system. The local value is symmetry up and town circle section, and asymmetry from left to right. This new method is aimed at general measuring configuration, and need not assume integration chords to be parallel (for instance, pinhole configurations). The local value in the boundary of toroidal plasma is obtained by other methods. In the center part, the asymmetrical local value is expanded to Fourier-Bessel series, and Fourier terms include the information of asymmetry. The coefficients of the expansions are determined using least-square-fitting method. We finally obtain the distribution of the local value by using the synthesis of the value in the boundary and the value in center part.  相似文献   

14.
王彬  谢文楷 《物理学报》2007,56(12):7138-7146
利用磁化等离子体介电张量和纵向场分量法对任意大小轴向磁场中等离子体填充耦合腔慢波结构进行场分析,得到磁化等离子体填充电子注通道电磁波场分量的轴对称精确解.在此基础上,建立耦合腔分区模型、采用场匹配方法建立色散方程,并数值计算得出不同等离子体密度及磁场下的耦合腔色散曲线.对不同密度等离子体填充情况下的耦合腔色散特性、混合模式的形成机理以及等离子体空间电荷波进行了分析讨论. 关键词: 耦合腔慢波结构 等离子体 混合模式 色散特性  相似文献   

15.
庆承瑞  周玉美 《物理学报》1980,29(1):106-110
在有导体壁的条件下,对于各种趋肤的及趋中心分布的等离子体纵向电流,用一种统一的迭代方法,计算了相应的自由界面的磁流体平衡方程解,并讨论了这种方法适用的范围。 关键词:  相似文献   

16.
A method has been proposed for determining the electrical parameters of a plasma in a transverse magnetic field in the absence of negative charge at the dielectric walls. The results obtained allow one to extrapolate the boundary conditions predicted for a weakly magnetized plasma toward the stronger magnetic fields.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号