光电子技术与器件 光能转换与器件

TM914．42 2005042928 染料敏化纳米ZnO薄膜太阳电池机理初探=Mechanism of dye-sensitized solar cell based on nanocrystalline ZnO films[刊,中]／曾隆月(中科院等离子体物理所．安徽,合肥 (230031)),戴松元…／／物理学报,-2005,54(1),-53-57 讨论利用ZnO代替TiO2作为光阳极制作染料敏化薄膜太阳电池的可行性。使用LSV法,IR光谱和UV-vis 光谱探讨了电池的工作机理和性能,并与染料敏化纳米     

染料敏化纳米薄膜太阳电池实验研究

染料敏化纳米薄膜太阳电池（DSCs）的性能主要是由纳米多孔TiO２₂薄膜、染 料光敏化剂 、电解质、反电极（光阴极）等几个主要部分决定的.通过优化DSCs各项关键技术和材料的 性能，并通过小面积DSCs的系列实验和优化组合实验来检测各项参数对DSCs性能的影响，获 得在光照1个太阳（AM15）下，光电转换效率达到895%.这为进行产业化制备大面积DSCs 打下了良好基础. 关键词： 染料敏化 太阳电池 优化 效率     

电沉积处理与染料敏化纳米薄膜太阳电池的优化

采用阳极氧化水解法对染料敏化纳米TiO₂薄膜太阳电池的光阳极进行不同方式的电沉积优化处理.借助x射线衍射仪对处理后的样品进行分析，通过超高分辨率场发射扫描电子显微镜对导电玻璃以及电沉积处理前后纳米多孔薄膜表面进行了粒径和形貌的扫描.染料敏化太阳电池实验测试结果表明，电沉积处理和修饰后可以明显提高光生电子的收集率，增大短路电流密度，提高电池效率. 关键词： 2')" href="#">纳米TiO₂ 染料敏化 电沉积 太阳电池     

纳米TiO2多孔膜的微结构对染料敏化纳米薄膜太阳电池性能的影响

采用溶胶-凝胶方法，在不同的实验条件下获得平均粒径从15到25nm左右的纳米TiO２2颗粒.利用这些颗粒制备出的纳米多孔薄膜，应用于染料敏化纳米薄膜太阳电池. 通过x射线 衍射仪分析，得到TiO２₂颗粒的晶相以及晶粒度大小，用透射电子显微镜观察 了纳米TiO２₂颗粒的形貌和尺寸.应用于太阳电池的纳米TiO２₂多 孔膜，经基于布朗诺尔-埃米特-泰 勒（BET）的多层吸附理论的比表面积测试和孔径分布测试，获得了多孔膜的微 关键词： 溶胶-凝胶法 2')" href="#">纳米TiO２₂ 染料敏化 太阳电池     

染料敏化太阳电池的实验室制备

根据染料敏化太阳电池的工作原理和结构构成,介绍了在基础实验条件下制备染料敏化太阳电池的方法.实验表明,采用天然染料敏化的TiO2半导体薄膜作为光阳极,镀碳的导电玻璃作为反电极,并选用含碘的氧化-还原电解质,通过组装能够产生一定的电能.     

染料敏化太阳电池及其进展

文章介绍了染料敏化太阳电池的研究背景和发展过程,简述了基于纳米TiO2半导体电极材料的染料敏化太阳电池的基本结构和工作机理.详细阐述了该电池国内外各项关键技术的实验和产业化研究最新成果,着重分析了染料敏化太阳电池的未来发展趋势,并对该电池的应用前景进行了展望.     

锐钛矿相TiO2纳米管的制备及其染科敏化太阳电池

以商用金红石相TiO2粉末为原料,通过在碱性溶液中150℃水热48h的方法合TiO2纳米管.采用SEM,TEN,XRD分析手段对TiO2纳米管的形貌和结构演变进行了表征.制成的TiO2纳米管与TritonX-100,乙酰丙酮混合后,通过丝网印刷的方法涂敷到ITO导电玻璃衬底上,并且在450℃下烧结30min后得到可应用于染料敏化太阳电池的多孔光阳极.将此光阳极浸泡于N719染料敏化后,与镀铂对电极组装电池,两者之间灌入液态电解质,电池的有效面积为0.28 cm2.在标准氙灯模拟器下(AM 1.5,100 roW/cm2)测试r电池的J-V特性,得到2.17%的光电转换效率.     

大面积染料敏化太阳电池的串联阻抗特性研究

在电子扩散微分方程的基础上,研究了染料敏化太阳电池光生电流和光生电压随光照强度不同的变化关系.提出敏化太阳电池串联阻抗功率损耗模型,理论模拟了大面积电池（有效面积>1 cm²）光电转换效率随多孔薄膜有效面积宽度变化的曲线、透明导电基底膜与银栅极的比接触电阻以及在不同入射光强下银栅极体电阻对大面积染料敏化太阳电池光伏性能的影响.结果表明透明导电基底膜的方块电阻和银栅极体电阻对大面积染料敏化太阳电池的性能有很大影响,而这种影响随光强的减弱逐渐减小. 关键词： 染料敏化 太阳电池 串联阻抗 光电转换效率     

染料敏化纳米晶薄膜太阳电池

文章介绍了一种新型的太阳电池——染料敏化纳米晶薄膜太阳电池的基本工作原理、目前研究的重点和进展以及应用前景和存在的问题，文章指出，这种新型的太阳电池以其制作简单并且具有进一步提高效率和降低成本的潜在优势，可以成为非晶硅太阳电池的有力竞争者。     

TiO2颗粒尺寸对染料敏化太阳电池内电子输运特性影响研究

采用强度调制光电流谱(IMPS)和强度调制光电压谱(IMVS)研究了染料敏化太阳电池(DSC)内部电子传输和背反应动力学特性.在纳米TiO2薄膜厚度相同的情况下,借助于IMPS/IMVS测量了由3种不同TiO2颗粒尺寸大小薄膜制备出DSC的电荷传输特征参数值.IMPS/IMVS理论模型拟合实验测量数据的结果表明:在不同入射光强下,随着颗粒尺寸的增大,电子扩散系数(Dn)增大,而电子寿命(τn)减小,电子传输时间(τd)也减小.Dn随颗粒尺寸增大而增加归因于薄膜表面积的减小,而τn减小可以通过缺陷之间的跃迁频率来解释,τd减小是由于TiO2薄膜内缺陷浓度减小而导致的.     

Influence of Yb-Doped Nanoporous TiO2 Films on Photovoltaic Performance of Dye-Sensitized Solar Cells

Yb-doped TiO2 pastes with different Yb/TiO2 weight ratios are prepared in the sol-gel process to obtain dyesensitized solar cells （DSCs）. The nanocrystalline size of Yb-TiO2 becomes smaller and the lattice parameters change. Lattice distortion is observed and dark current is detected. It is found that a part of Yb existing as insulating oxide Yb2O3 state acts as barrier layers at the electrode-electrolyte interface to suppress charge recombination. A Yb-doped TiO2 electrode applied in DSCs leads to a higher open-circuit voltage and a higher fill factor. How the Yb-doped TiO2 films affect the photovoltaic response of DSCs is discussed.     

Improved performance of a crystalline silicon solar cell based on ZnO/PS anti-reflection coating layers

A porous silicon (PS) layer was prepared by photoelectrochemical etching (PECE), and a zinc oxide (ZnO) film was deposited on a PS layer using a radio frequency (RF) sputtering system. The surface morphology of the PS and ZnO/PS layers was characterised using scanning electron microscopy (SEM). Nano-pores were produced in the PS layer with an average diameter of 5.7 nm, which increased the porosity to 91%. X-ray diffraction (XRD) of the ZnO/PS layers shows that the ZnO film is highly oriented along the c-axis perpendicular to the PS layer. The average crystallite size of the PS and ZnO/PS layers are 17.06 and 17.94 nm, respectively. The photoluminescence (PL) emission spectra of the ZnO/PS layers present three emission peaks, two peaks located at 387.5 and 605 nm due to the ZnO nanocrystalline film and a third located at 637.5 nm due to nanocrystalline PS. Raman measurements of the ZnO/PS layers were performed at room temperature (RT) and indicate that a high-quality ZnO nanocrystalline film was formed. Optical reflectance for all the layers was obtained using an optical reflectometer. The lowest effective reflectance was obtained for the ZnO/PS layers. The fabrication of crystalline silicon (c-Si) solar cells based on the ZnO/PS anti-reflection coating (ARC) layers was performed. The I–V characteristics of the solar cells were studied under 100 mW/cm² illumination conditions. The ZnO/PS layers were found to be an excellent ARC and to exhibit exceptional light-trapping at wavelengths ranging from 400 to 1000 nm, which led to a high efficiency of the c-Si solar cell of 18.15%. The ZnO/PS ARC layers enhance and increase the efficiency of the c-Si solar cell. In this paper, the fabrication processes of the c-Si solar cell with ZnO/PS ARC layers are an attractive and promising technique to produce high-efficiency and low-cost of c-Si solar cells.     

Synthesis of cauliflower-like ZnO-TiO2 composite porous film and photoelectrical properties

A series of cauliflower-like TiO₂-ZnO composite porous films with various molar ratios of Zn/Ti were prepared by the screen printing technique on the fluorine-doped SnO₂ (FTO) conducting glasses. The composite films were characterized by field-emission scanning electron microscopy (FE-SEM), X-ray energy-dispersive spectrometry (EDS) and UV-vis transmittance spectrum. The results showed composite film electrode had a novel cauliflower-like morphology, which could effectively increase the dye absorption. The corresponding dye-sensitized solar cells (DSCs) were made by the composite film, and effects of ZnO incorporation on the photovoltaic performances of the DSCs were studied. With the Zn/Ti molar ratio not more than 3% in ZnO-TiO₂ composite film of about 5 μm-thickness, the photocurrent density (J_sc) and the solar-to-electricity conversion efficiency (η) were greatly improved compared with those of the DSC based on bare TiO₂ film of same thickness. This increases in efficiency and J_sc were attributed to high electron conductivity of ZnO, the improved dye adsorption and large light transmittance of composite film.     

Electron transport in dye-sensitized solar cells based on TiO2 nanowires

Anatase titanium dioxide nanowire arrays were prepared by hydrothermally oxidizing titanium foils in aqueous alkali and transferred onto fluorinated tin oxide(FTO)glass for use as the photoanodes of front side illuminated dye-sensitized solar cells(DSCs).Electrochemical impedance spectroscopy(EIS)measurement was applied to compare the electron transport and recombination properties of DSCs using TiO2nanowire films and TiO2nanoparticle films as photoanodes.It was found that the nanowire array films possess smaller electron transport resistance(Rt)and larger electron diffusion length(Le)in the photoanodes,suggesting that the nanowire arrays can enhance the electron transport rate and have a potential to improve the charge collection efficiency of DSCs.     

Low-temperature-processed ZnO thin films as electron transporting layer to achieve stable perovskite solar cells

Morphology and surface property of ZnO thin films as electron transporting layer in perovskite solar cells are crucial for obtaining high-efficient and stable perovskite solar cells. In this work, two different preparation methods of ZnO thin films were carried out and the photovoltaic performances of the subsequent perovskite solar cells were investigated. ZnO thin film prepared by sol–gel method was homogenous but provided high series resistance in solar cells, leading to low short circuit current density. Lower series resistance of solar cell was obtained from homogeneous ZnO thin film from spin-coating of colloidal ZnO nanoparticles (synthesized by hydrolysis–condensation) in a mixture of 1-butanol, chloroform and methanol. The perovskite solar cells using this film achieved the highest power conversion efficiency (PCE) of 4.79% when poly(3-hexylthiophene) was used as a hole transporting layer. In addition, the stability of perovskite solar cells was also examined by measuring the photovoltaic characteristic for six consecutive weeks with the interval of 2 weeks. It was found that using double layers of the sol–gel ZnO and ZnO nanoparticles provided better stability with no degradation of PCE in 10 weeks. Therefore, this work provides a simple method for preparing homogeneous ZnO thin films in order to achieve stable perovskite solar cells, also for controlling their surface properties which help better understand the characteristics of perovskite solar cells.     

溶胶-凝胶法纳米ZnO薄膜的绿光发射

利用溶胶-凝胶法制备了纳米ZnO薄膜,室温下测量了样品的光致发光谱(PL)和X射线衍射谱(XRD),观测到中心波长在523 nm附近的绿色荧光发射,研究了纳米ZnO薄膜的绿光发射机制,证实了纳米ZnO薄膜绿光可见发射带来自氧空位(Vo)形成的浅施主能级和锌空位(Vzn)形成的浅受主能级之间的复合。     

Inverted organic solar cells comprising low-temperature-processed ZnO films

Inverted organic solar cells are fabricated using low-temperature-annealed ZnO film as an electron transport layer. Uniform ZnO films were prepared by spin coating a diethylzinc (DEZ) precursor solution in air, followed by annealing at 100 °C. Organic solar cells prepared on these ZnO films with a 1:1 P3HT:PCBM blend as the active layer show a high power conversion efficiency of 4.03 %, which is more than 10 % higher than the PCE of solar cells comprising ZnO prepared via a high-temperature sol–gel route.     

纳米ZnO薄膜可见发射机制研究

利用溶胶－凝胶法 （Sol-Gel）制备了纳米ZnO薄膜，获得了高强的近紫外发射室温下测量了样品的光致发光谱(PL )、吸收谱(ABS)、X射线衍射谱(XRD).X射线衍射(XRD)的结果表明：纳米ZnO薄膜呈多晶态，具有六角纤锌矿结构和良好的C轴取向；发现随退火温度升高，（002）衍射峰强度显著增强，衍射峰的半高宽（FWHM）减小、纳米颗粒的粒径增大.由吸收谱(ABS)给出了样品室温下带隙宽度为3.30 eV.在PL谱中观察到二个荧光发射带，一个是中心波长位于392 nm附近强而尖的紫带，另一个是519 nm附近弱而宽的绿带研究了不同退火温度样品的光致发光峰值强度的变化关系，发现随退火温度升高，紫带峰值强度增强、绿带峰值强度减弱，均近似呈线性变化.证实了纳米ZnO薄膜绿光发射主要来自氧空位(Vo)形成的浅施主能级与锌空位(VZn)形成的浅受主能级之间的复合，或氧空位(Vo)形成的深施主能级上的电子至价带顶的跃迁；紫带来自于导带中的电子与价带中的空位形成的激子复合.     

Nanostructured ZnO thin films by chemical bath deposition in basic aqueous ammonia solutions for photovoltaic applications

This paper presents further insights and observations of the chemical bath deposition (CBD) of ZnS thin films using an aqueous medium involving Zn-salt, ammonium sulfate, aqueous ammonia, and thioure. Results on physical and chemical properties of the grown layers as a function of ammonia concentration are reported. Physical and chemical properties were analyzed using scanning electron microscopy (SEM), X-ray energy dispersive (EDX), and X-ray diffraction (XRD). Rapid growth of nanostructured ZnO films on fluorine-doped SnO₂ (FTO) glass substrates was developed. ZnO films crystallized in a wurtzite hexagonal structure and with a very small quantity of Zn(OH)₂ and ZnS phases were obtained for the ammonia concentration ranging from 0.75 to 2.0 M. Flower-like and columnar nanostrucured ZnO films were deposited in two ammonia concentration ranges, respectively: one between 0.75 and 1.0 M and the other between 1.4 and 2.0 M. ZnS films were formed with a high ammonia concentration of 3.0 M. The formation mechanisms of ZnO, Zn(OH)₂, and ZnS phases were discussed in the CBD process. The developed technique can be used to directly and rapidly grow nanostructured ZnO film photoanodes. Annealed ZnO nanoflower and columnar nanoparticle films on FTO substrates were used as electrodes to fabricate the dye sensitized solar cells (DSSCs). The DSSC based on ZnO-nanoflower film showed an energy conversion efficiency of 0.84%, which is higher compared to that (0.45%) of the cell being constructed using a photoanode of columnar nanoparticle ZnO film. The results have demonstrated the potential applications of CBD nanostructured ZnO films for photovoltaic cells.     

纳米ZnO薄膜的光致发光性质

利用溶胶－凝胶法制备了纳米ZnO薄膜,室温下测量了样品的光致发光谱(PL)、吸收谱(ABS)、X射线衍射谱(XRD)．X射线衍射(XRD)的结果表明：纳米ZnO薄膜呈多晶状态,具有六角纤锌矿晶体结构和良好的C轴取向．观察到二个荧光发射带,中心波长分别位于395 nm的紫带、524 nm的绿带和450 nm附近的蓝带．证实了纳米ZnO薄膜绿光可见发射带来自氧空位(VO)形成的浅施主能级和锌空位(VZn)形成的浅受主能级之间的复合;450 nm附近的蓝带来自电子从VO的浅施主能级到价带顶或锌填隙(Zni) 到价带顶或导带底到VZn的浅受主能级的复合．