稠密可压缩气粒两相流动中的等熵声速计算建模及物理规律

气体相与颗粒相混合流场的声速研究, 由于具有重要的基础理论价值与广泛的工程应用背景, 逐渐受到人们重视. 针对稠密可压缩气粒两相流动, 综合考虑颗粒相所占空间体积以及颗粒间相互作用, 推导给出了新的等熵声速计算公式; 新公式包含了已有的纯气体、稀疏气粒两相流情形的计算公式作为其特例, 一方面验证了公式推导的正确性, 另一方面说明新公式更具有通用性; 分析了不同颗粒质量分数条件下的声速变化规律, 相应结果与普朗特的理论分析符合, 特别对于稠密气粒两相流动工况得到了一些新的物理认识; 开展了颗粒间相互作用建模参数的物理分析, 揭示了其对气粒两相流动声速的影响机理. 本文取得的成果为稠密可压缩气粒两相流动研究以及相关工程应用提供理论支撑.     

偏晶合金液-液相分离的格子玻尔兹曼方法模拟

本文建立了一个模拟在弥散相液滴的扩散长大、碰撞凝并和Ostwald熟化等因素的作用下偏晶合金液-液相分离过程的二维格子玻尔兹曼方法 (lattice Boltzmann method, LBM) 模型.该模型结合了Shan-Chen的两相流模型和Qin的介观粒子相互作用势模型的优点,并在LB演化方程中引入了反映相变的源项.应用该模型模拟研究了偏晶合金液-液相分离过程中单液滴的生长、两液滴的合并和多液滴的生长规律.结果表明在两液相区中第二相单个液滴的生长是一个通过扩散从非平衡态到平衡态过渡的过程.两液滴合并 关键词： 偏晶合金 液-液相分离 格子玻尔兹曼方法     

二维拉格朗日坐标系下气粒混合双向耦合对激波流场影响的计算

喷射颗粒与气体混合是内爆压缩领域的热点和难点. 针对喷射混合中的气粒双向耦合问题, 开展了理论建模、离散算法以及颗粒反馈对激波流场的影响研究. 建立了拉格朗日计算框架下的数学模型; 给出了耦合源项的离散算法; 开展了平面及汇聚构型条件下, 气粒双向耦合的数值模拟研究; 发现了颗粒反馈导致气体激波提速现象以及气区流场物理量分布形态的改变, 初步获得了量化分析结果. 本文建立的数学模型、计算方法和获得的新的物理认识, 为深入理解喷射混合现象、解决相关工程应用问题提供了重要理论支撑.     

Development of particle image velocimetry for multiphase flow diagnostics

This paper discusses the suitability of PIV for measuring simultaneously the velocity field of every phase and the size and concentration field of the disperse phases in multiphase flows. Velocity and disperse phase information are both inferred either directly from the Young’s fringe pattern (far field diffraction function) or from its 2-D Fourier transform (autocorrelation function). In the first case, the velocity is inferred from the orientation and spacing of the fringes while the disperse phase size is inferred from the size of the diffraction halo that modulates the fringes. In the second case, the velocity and particle shape are related to the position and shape of the strongest autocorrelation peaks, respectively. Particle sizes are used to discriminate between phases on the velocity measurements. The technique has been demonstrated on a high speed air-particle flow, where the potential for determining air velocities and particle size and velocities are shown.     

修正内嵌边界法对颗粒运动的直接模拟

本文提出了一种基于内嵌边界法(IBM)的思想,在描述颗粒只有较少网格时能较为准确地计算气固多相流的模型.模型依据边界层理论,通过定义颗粒表面的速度分布函数来修正由于计算网格尺度大于边界层厚度所带来的误差.本文通过计算单颗粒绕流和单颗粒沉降的最终沉降速度并与实验进行比较验证了本文模型的准确性.     

Particle Dynamics in an Electrohydrodynamic Flow Field investigated with a two-component laser-doppler velocimeter

A laser-Doppler instrument has been used to measure the migration velocity of NaCl particles in an electrohydrodynamic flow field of an electrical precipitator. The measured average migration velocity of 1.40-μm particles (number distribution median with a geometric standard devitation of 1.46) is approximately five to six times higher than the calculated steady-state velocity for a 1.40-μm particle, provided there is a saturation charge of at least 90f%. Further, the particle velocities in the main flow direction are also influenced by the electrical operation conditions. Both observations demonstrate the important role of the state of the electrohydrodynamic flow field (superposition of moving gas ions and neutral gas molecules) on the particle transport, characterized by the dimensionless electrohydrodynamic number N_EHD. A comparison between six different electrohydrodynamic states revealed that N_EHD ≈? 1 is a critical value for the mutual interactions between the gas ions and the neutral gas phase. Whereas for N_EHD values > 1 the stochastic particle motion is chiefly determined by the nonsteady-state character of the negative corona, for N_EHD values < 1 the particle velocity fluctuations are governed by the turbulence level of the neutral fluid. These finding might be helpful in adjusting the operating conditions in electrical precipitators for and optimized particle separation.     

瑞利-泰勒不稳定性的格子玻耳兹曼模拟

发展了一个不相混两相流体的格子玻耳兹曼模型，模拟瑞利-泰勒不稳定性．模型使用正方格阵并引入了一外力．数值模拟得到了界面扰动的线性和非线性发展图象，并与实验和其它方法的结果进行了比较 关键词：     

螺旋管内气液固三相流颗粒相分布规律

为了深入认识螺旋管多相流相分离现象,并为新型螺旋管除砂器设计提供指导,本文应用马尔文粒度仪,测量了螺旋管气水砂三相流底部水平段液膜中的颗粒浓度和粒度分布。研究表明:在泡状流和分层流条件下,螺旋管底部水平段可形成稳定的连续液膜流动;在宽广的气速范围内,液膜中的颗粒浓度分布规律均为内弯侧较低、外弯侧较高,说明螺旋管除砂器对于实际生产中流动工况的变化具有良好的适应性;泡状流中提高气速有利于分离;分层流中在中等气速条件下外弯侧颗粒浓度最大,中等气速是相分离的最佳操作工况。     

A numerical source of small-scale number-density fluctuations in Eulerian–Lagrangian simulations of multiphase flows

Eulerian–Lagrangian simulations of multiphase flow are known to suffer from two errors that can introduce small-scale fluctuations in the number-density of the dispersed phase. These errors can be reduced by increasing the number of particles in the simulation. Here, we present results to demonstrate that a third error exists that can also generate small-scale number-density fluctuations. In contrast to the two known errors, this error cannot be lowered by increasing the number of particles. Analysis shows that this error is caused by spatial variation at the subgrid scale in the interpolation error of the fluid velocity to the particle location. If the particle velocity divergence is zero, the particle concentration error remains at the subgrid scale. However, if particles preferentially accumulate either due to their inertia or due to divergence of the underlying fluid-velocity field, this error manifests as number-density fluctuations on the grid scale. The only mechanism of reducing these errors is through higher-order accurate interpolation. By studying two model problems, estimates for the errors are derived. These estimates are shown to be quite accurate for simulations of shock and expansion waves interacting with particles.     

The thermodynamic characteristics of multicomponent reaction mixtures in the sub- and supercritical states

The paper presents mathematical models and calculation methods for solving particular research problems related to the thermodynamic characteristics of multicomponent and multiphase mixtures. The special features of chemical and phase equilibria in such mixtures are considered in the ideal gas approximation and taking nonideality into account. The conditions of equilibrium phase stability are studied for multiphase systems. The results of calculations of characteristic phase diagrams and binodal and spinodal are given for model systems with a fixed chemical composition, and a new interpretation of the mathematical model for localizing the critical point of a multicomponent mixture with a given composition is presented. A new interpretation of the well-known classic homotopy method is suggested for solving complex nonlinear systems of equations. Some anomalies of phase portraits and critical curves that are necessary to take into account in selecting (planning) experimental conditions and calculating chemical processes and reaction parameters are considered separately. The possibility of calculating thermodynamic and thermophysical properties (entropy, enthalpy, heat capacity, heat effects of reactions, and adiabatic heating) is demonstrated for the example of particular multicomponent nonideal mixtures. The conclusion is drawn that cubic equations of state can be used for predicting the deviations of these properties from the ideal gas state and their anomalies in the vicinity of the critical points of mixtures.     

Computer simulation of the drift of solid particles caused by resonance gas oscillations in the open channel

Computer simulation methods are used to study the drift of solid spherical particles suspended in the open channel due to longitudinal oscillations of the gas column. The gas velocity field consists of periodic nonlinear waves and an acoustic flow. The particles move under the action of the Stokes force. Particle distributions in the wave field of the open channel are obtained in the vicinity of the first, second and third eigen-frequencies of the gas column. The particle’s spatial distribution features attributed to the particle’s drift under the action of acoustic radiation are revealed.     

固体颗粒与通道壁面相互作用的实验研究

本文通过实验研究了在一个水平直通道和三个倾斜通道内固体颗粒沿着主气流的方向运动,与通道壁面发生碰撞及和主气流掺混的特性。实验采用了PIV测试技术,获得了在流道中固体颗粒及气流的大量的瞬态及对应的时均流场数据。测量采用流场可视化技术,再现了流场的动态细节。在对实验数据分析的基础上,总结了有关颗粒扩散及与固壁碰撞的一些规律,定量阐述了固体颗粒与壁面碰撞的规律,提出了恢复系数为粒子入射速度与角度函数的模型。     

用雷诺应力模型计算旋风分离器中气-固两相流动

针对分离器内部的复杂的三维强旋转、气-固两相湍流运动,采用雷诺应力模型(SSG),利用贴体网格技术,模拟计算了分离器内部流动,并将计算结果与实验数据进行分析、比较。分离器内的固体颗粒运动采用涉及湍流扩散影响的随机轨道模型和确定轨道模型,在流场计算的基础上,模拟了不同直径的颗粒在分离器内的运动规律及颗粒分离效率,并同理论和实验得到的数据进行了比较。     

一种新的光子多普勒速度频谱分析方法

光子多普勒速度计可给出飞层表面某一速度带内颗粒群速度随时间演化的频谱数据, 在冲击动力学实验尤其是微喷射及其混合研究中得到广泛应用. 本文提出一种新的光子多普勒频谱数据分析方法, 可推断出混合区厚度变化和前端等效颗粒尺度. 利用该方法, 对一些典型状态下喷射混合速度频谱开展分析, 获得了不同冲击压力、气体条件下颗粒度数据, 证实了气体环境下喷射颗粒的气动破碎现象, 以及破碎后尺度与初始条件的依赖性, 为喷射混合物理规律研究提供了重要依据.     

Flow of an electrically conducting bubble liquid in the field of an electromagnetic force

Physical processes accompanying the flow of a conducting bubble liquid in crossed electric and magnetic fields are considered. Based on the general equations of mechanics of multiphase media, we develop a one-dimensional model of the flow of and heat exchange in a compressible bubble liquid when the phases are not in thermal and velocity equilibrium. The model is numerically investigated. It is demonstrated that, when the bubble liquid flows along the electromagnetic force vector, the bubbles lag behind the carrying flow and are compressed and warmed up. This causes oscillations of the bubble volume, as well as oscillations of the parameters of both the disperse and carrying phase. In particular, the compression of the bubbles reduces the volumetric gas content, as well as increases the effective conductivity of the flow and the electromagnetic force in the downstream direction. This sets conditions for crisis of the bubble flow when the electromagnetic force expels the bubbles against the main stream. On the basis of the solutions obtained, the efficiency of a gas compressor is calculated.     

水轮机转轮内部的三维固液两相紊流计算

1引言本文利用两相流动的多流体模型和k－。－A。两相索流模型计算水轮机转轮内部的三维固液两相紊流。在索流两相流动的多流体即多连续介质模型中，离散相看成是Euler坐标中处理的拟流体。与小滑移和无泪移模型不同的是，多流体模型可以分别考虑大滑移和离散颗粒扩散，其间无直接联系，并且能够充分考虑离散相质量、动量及能量的湍流扩散山本文利用速度压力校正法之一：SIMPLEC法进行数值计算。该法最早使用在S．VPatankar和D．B．Snalding在1972年提出的SIMPLE算法中间，本文将其推广到具有交错网格的非正交贴体坐标系中计算三维…     

Formation of closed carbon particles from fullerene nuclei

The model proposed earlier for the formation of closed carbon particles from fullerene nuclei is discussed. Experimental data in support of this model are analyzed. The possible mechanisms of particle formation are treated within the microscopic concepts. Theoretical relationships for describing the rate and the time of particle growth are derived, and a number of quantitative estimates are made. The conclusion is drawn that the particle growth is similar in a number of traits to crystal growth from the gaseous phase. Consideration is also given to the specific features of the particle growth.     

激光点火煤粒着火的模型分析

本文对颗粒煤在激光加热条件下的着火和燃烧进行了数值模拟。采用的是一个简单的煤粒着火与燃烧的一维模型。该模型采用了热解和双平行反应模型,考虑了煤粒表面的多相反应和气相的基元反应以及气相中的传热与传质。从获得的煤粒表面和气相空间的温度随时间的变化规律,可以判断不同煤种的着火方式。     

气粒两相流传热问题的光滑离散颗粒流体动力学方法数值模拟

在气粒两相流动问题中,颗粒间以及气体与颗粒间的传热问题不可忽略.光滑离散颗粒流体动力学(SDPH)模型作为一种新的求解气粒两相流动问题的方法,已经成功应用于模拟风沙运动等问题.在此基础上,提出了SDPH方法的热传导模型,模拟了气粒两相流动问题中的热传导过程以及颗粒蒸发过程.首先引入各相的能量方程,利用有限差分与光滑粒子流体动力学一阶导数相结合的方法,处理各相内部热传导项中的二阶导数问题,基于气粒两相间温度差及对流换热系数计算颗粒与气体间的热传导量,推导得到了含热传导模型的气粒两相流SDPH计算方程组,模拟计算了圆盘形颗粒团算例及鼓泡流化床内部热传导算例,并与双流体模型计算结果进行对比,结果基本符合;其次利用离散液滴模型中的颗粒蒸发传质传热定律计算颗粒的蒸发过程,数值模拟了颗粒射流蒸发过程,并与离散颗粒模型结果进行对比,两者符合得较好,验证了该方法的准确性及实用性.     

Identification of Regions with Inhomogeneous Particle Behavior in Dilute Gas‐solid Flows

The behavior of the particulate phase in a highly turbulent gas flow has been investigated in a vertical channel. Variations of the flow configuration (1. Flow past a cylinder, 2. flow past a wall‐mounted obstacle and 3. flow around a horizontally injected jet) have been subject to both experiments and numerical simulations. The velocity vector field of the solid phase has been measured by digital particle image velocimetry (DPIV). The measurements have been focused on particle‐obstacle collisions and crossflow in the vicinity of the jet nozzle using the lately developed twinpeak detection method. By application of this method regions of highly inhomogeneous particle behavior could be detected mainly upstream of the flow perturbation. Numerical results have been obtained by an Eulerian‐Lagrangian method on boundary‐fitted grids. Particle‐particle interactions as well as interphase exchange of momentum have been taken into account. The simulation results showed to be well in accordance with the experimental results.