节能灯用BaMgAl10O17:Eu2+,Mn2+荧光粉的劣化机理研究

对节能灯用BaMgAl₁₀O₁₇: Eu²⁺,Mn²⁺荧光粉的热劣化和紫外辐照劣化机理进行了对比研究. 发现热处理和紫外辐照处理均对BaMgAl₁₀O₁₇: Eu²⁺,Mn²⁺产生明显的发光劣化作用. 研究结果表明：热劣化主要涉及到Eu²⁺ 的氧化及其格位偏移, 而紫外辐照劣化与上述过程无关. 紫外辐照劣化主要源自高能紫外辐照使Eu²⁺ 处于更加不稳定的状态, 从而降低Eu²⁺ 的直接吸收和发射强度.     

Photoluminescence degradation mechanism of BaMgAl10O17：Eu2＋ phosphor by vacuum ultraviolet irradiation

<正>A real high power vacuum ultraviolet light source is applied to the investigation on the vacuum ultraviolet irradiation degradation of BaMgA₁₀O₁₇:Eu²⁺ phosphor.The degradations of emission intensity and color quality of the sample are clearly observed after irradiation.It reveals that the oxidation of Eu²⁺ during irradiation is partly responsible for the degradations.The excitation and absorption spectra show that some traps generated during irradiation have negative influence on the luminescence of sample and these traps have been identified as positively charged oxygen vacancies by positron annihilation.The investigations on host emission and decay curve further confirm that these oxygen vacancies are involved in the perturbation of energy transfer from the host to Eu²⁺ and finally result in the degradation.     

Luminescent properties of SrMg<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>:Eu<Superscript>2+</Superscript>, and Mn<Superscript>2+</Superscript> as a potential phosphor for ultraviolet light-emitting diodes

Eu²⁺ and Mn²⁺ co-doped SrMg₂(PO₄)₂ phosphors with blue and red two emission bands were prepared by the high temperature solid state method and their luminescent properties have been investigated as a function of activator and co-activator concentrations. Resonance-type energy transfers from Eu²⁺ to Mn²⁺ were discovered by directly overlapping the Eu²⁺ emission spectrum and the excitation spectrum of Mn²⁺. Efficiencies of energy transfer were also calculated according to the changes of relative intensities of Eu²⁺ and Mn²⁺ emission. According to the principle of energy transfer, we demonstrated that the phosphor SrMg₂(PO₄)₂:Eu²⁺,Mn²⁺ with double emission bands exhibited a great potential as a phosphor for ultraviolet light-emitting diodes and the relative intensities of blue and red emission could be tuned by adjusting the contents of Eu²⁺ and Mn²⁺. PACS 78.55.-m     

Phase dependent photoluminescence and energy transfer in Ca2P2O7: Eu2+, Mn2+ phosphors for white LEDs

α- and β-Ca₂P₂O₇: Eu²⁺, Mn²⁺ phosphors were prepared by solid-state reaction. Phase transition from tetragonal (β-phase) to monoclinic (α-phase) is performed. A strong orange emission of Mn²⁺ is observed in both α-and β-Ca₂P₂O₇: Eu²⁺, Mn²⁺ upon near ultraviolet (UV) excitation through energy transfer from Eu²⁺ to Mn²⁺. The transfer efficiencies for various Mn²⁺ concentrations are estimated based on lifetime measurements of the fluorescence of Eu²⁺ in the two phases. The photoluminescence excitation spectra of α-Ca₂P₂O₇: Eu²⁺, Mn²⁺ can cover 400 nm of the near-UV range, denoting its potential use as a phosphor with intense orange component for white light emitting diodes (LEDs).     

Luminescence and energy transfer of Eu/Mn co-doped SiO2–Al2O3–ZnO–K2O glass ceramics for white LEDs

Transparent Eu²⁺/Mn²⁺ co-doped new glass ceramics (GC) containing β-Zn₂SiO₄ nanocrystals were prepared under a reduced atmosphere. The optical properties of these samples have been investigated. The emission spectra of Eu²⁺/Mn²⁺ co-doped glass ceramics show two broadband peakings at 458 and 560 nm under ultraviolet radiation, which can be attributed to 4f⁶5d¹→4f⁷ transition of Eu²⁺ and ⁴T₁(⁴G)→⁶A₁(⁶S) transition of Mn²⁺, respectively. Energy transfer (ET) from Eu²⁺ to Mn²⁺ is discovered by directly observing significant overlap of the excitation spectrum of Mn²⁺ and the emission spectrum of Eu²⁺. ET from Eu²⁺ to Mn²⁺ in glass ceramics is further confirmed by fluorescence studies performed on the samples with various activator (Mn²⁺) concentrations. The optimal composition generates white light with chromaticity coordinates (0.291, 0.344). The results indicate that Eu²⁺/Mn²⁺ co-doped glass ceramics is potential material for white light-emitting diodes (LEDs).     

Photoluminescence properties of Eu and Mn-activated BaMgP2O7 as a potential red phosphor for white-emission

A phosphate compound, BaMgP₂O₇ was co-doped with Eu²⁺ and Mn²⁺ for making a red-emitting phosphor. The phosphor was prepared by a solid-state reaction at high temperature. The photoluminescence properties were investigated under ultraviolet (UV) ray excitation. From a powder X-ray diffraction (XRD) analysis, the formation of single-phased BaMgP₂O₇ with a monoclinic structure was confirmed. In the photoluminescence spectra, the BaMgP₂O₇:Eu,Mn phosphor emits two distinctive colors: a blue band centered at 409 nm originating from Eu²⁺ and a red band at 615 nm caused by Mn²⁺. Also, efficient energy transfer from Eu²⁺ to Mn²⁺ in the BaMgP₂O₇:Eu,Mn system was verified by observing that the excitation spectra of BaMgP₂O₇:Eu,Mn emitted at 409 and 615 nm by Eu²⁺ emission and Mn²⁺ emission, respectively, are almost the same as that of BaMgP₂O₇:Eu monitored at 409 nm. The optimum concentration of Eu²⁺ ions in BaMgP₂O₇:0.015Eu excited at 309 nm wavelength is 1.5 mol%. With an increase of Mn²⁺ content up to 17.5 mol%, a systematic decline in the intensity of the excitation spectrum by Eu²⁺ and a gradual growth in the intensity of emission band by Mn²⁺ were observed. Accordingly, the optimum concentration of Mn²⁺ in BaMgP₂O₇:0.015Eu,Mn is 17.5 mol%. The maximum spectral overlap between emission of Eu²⁺ and excitation of Mn²⁺ is achieved in a composition of BaMgP₂O₇:0.015Eu,0.175Mn, resulting in considerable red-emission at 615 nm.     

Fluorescence emission spectrum and energy transfer in Eu and Mn co-doped Ba2Ca(BO3)2 phosphors

Eu²⁺ and Mn²⁺ co-doped Ba₂Ca(BO₃)₂ phosphors yield two emission bands consisting of green and red components under the excitation of 360 nm, which shows a great potential for white LEDs. Effective energy transfer occurs in Eu²⁺/Mn²⁺ co-doped Ba₂Ca(BO₃)₂ host due to the large spectral overlap between the emission of Eu²⁺ and the excitation of Mn²⁺. The energy transfer from Eu²⁺ to Mn²⁺ is thoroughly investigated by their excitation, emission and photoluminescence decay behaviors, and is demonstrated to be via the dipole–quadrupole interaction.     

Eu2+,Mn2+在BaZnP2O7中的发光及Eu2+→Mn2+能量传递

采用高温固相法合成了BaZnP₂O₇:Eu²⁺,Mn²⁺荧光粉,并对其发光性质及Eu²⁺对Mn²⁺的能量传递机理进行了研究.Eu²⁺和Mn²⁺在380 nm和670nm的发射峰分别由Eu²⁺的5d—4f跃迁和Mn²⁺的⁴T₁(^{4关键词： 磷酸盐 2+}')" href="#">Eu²⁺ 2+')" href="#">Mn²⁺ 能量传递     

Luminescence and energy transfer in Eu2+,Mn2+ codoped Na2BaMgP2O8 phosphor

Eu²⁺ single-doped and Eu²⁺/Mn²⁺-codoped Na₂BaMgP₂O₈ phosphors were prepared by a combustion-assisted synthesis method. The phase formation was confirmed by X-ray powder diffraction measurement. Na₂BaMgP₂O₈:Eu²⁺,Mn²⁺ shows a broad blue emission band and a red emission band, which originate from Eu²⁺ occupying the Ba²⁺ sites and Mn²⁺ occupying the Mg²⁺ sites, respectively. The efficient energy transfer from Eu²⁺ to Mn²⁺ is verified by the excitation and emission spectra together with the luminescence decay curves. Based on the principle of energy transfer, the relative intensities of blue and red emissions could be tuned by adjusting the contents of Eu²⁺ and Mn²⁺.     

Photoluminescence properties of color-tunable SrMgAl10O17:Eu2+,Mn2+ phosphors for UV LEDs

Aluminate phosphors SrMgAl₁₀O₁₇ codoped with Eu²⁺ and Mn²⁺ ions were prepared by solid-state reaction. The phase structure and photoluminescence properties of the as-prepared phosphors were characterized by powder X-ray diffraction, photoluminescence excitation and emission spectra. Upon excitation of UV light, two broad emission bands centered at 470 and 515 nm were observed, and they were assigned to Eu²⁺ and Mn²⁺ emissions, respectively. The emission color of the phosphors can be tuned from blue to cyan and finally to green by adjusting the concentration ratios of Eu²⁺ and Mn²⁺. Effective energy transfer occurs from Eu²⁺ to Mn²⁺ in the host due to the spectral overlap between the emission band of Eu²⁺ and the excitation bands of Mn²⁺. The energy transfer mechanism was demonstrated to be electric dipole–quadrupole interaction. The energy transfer efficiency and critical distance were also calculated. The phosphors exhibit strong absorption in near UV spectral region and therefore they are potentially useful as UV-convertible phosphors for white LEDs.     

White light emitting from single phased K2Ca1−x−yP2O7: xEu, yMn phosphors under UV excitation

A single phased white light emitting phosphors K₂Ca_1−x−yP₂O₇: xEu²⁺, yMn²⁺ were synthesized by solid state reaction method. The Effective energy transfer occurs in this phosphor due to the large spectral overlap between the emission of Eu²⁺ and the excitation of Mn²⁺. The emission hue of K₂Ca_1−x−yP₂O₇: xEu²⁺, yMn²⁺ from blue to white light can be obtained by tuning the Eu²⁺/Mn²⁺ content ratio. The energy transfer mechanism from Eu²⁺ to Mn²⁺ in this phosphor was carefully investigated and demonstrated to be via the dipole–quadrupole interaction.     

Nonradiative energy transfer from Mn2+ to Eu3+ in K2CaP2O7:Mn2+,Eu3+ phosphor

A series of color tunable phosphors K₂Ca_1?x?yP₂O₇:xMn²⁺, yEu³⁺ are synthesized by solid state reaction method. The energy transfer phenomenon from Mn²⁺ to Eu³⁺ has been observed in the Mn²⁺/Eu³⁺ codoped non-magnetic K₂CaP₂O₇ host, which was confirmed by PL spectra and decay curves. The Mn²⁺→Eu³⁺ energy transfer is controlled by quadrupole–quadrupole interaction between sensitizer and activator. The maximum efficiency of energy transfer is estimated to be 33% with x=0.125 and y=0.03 in K₂Ca_1?x?yP₂O₇:xMn²⁺, yEu³⁺ phosphor. The phosphors can emit light from green to yellow and eventually to orange under 400 nm excitation by changing the Mn²⁺/Eu³⁺ content ratio, indicating that K₂CaP₂O₇: Mn²⁺, Eu³⁺ would be potential candidates for use in lighting and displays applications.     

Intense green/yellow emission in Ca8Zn(SiO4)4Cl2:Eu, Mn through energy transfer for blue-LED lighting

Eu²⁺ and Mn²⁺ co-doped Ca₈Zn(SiO₄)₄Cl₂ phosphors have been synthesized by a high temperature solid state reaction. Energy transfer from Eu²⁺ to Mn²⁺ is observed. The emission spectra of the phosphors show a green band at 505 nm of Eu²⁺ and a yellow band at 550 nm of Mn²⁺. The excitation spectra corresponding to 4f⁷-4f⁶5d transition of Eu²⁺ cover the spectral range of 370-470 nm, well matching UV and/or blue LEDs. The shortening of fluorescent lifetimes of Eu²⁺ followed by simultaneous increase of fluorescent intensity of Mn²⁺ with increasing Mn²⁺ concentrations is studied based on energy transfer. Upon blue light excitation the present phosphor can emit intense green/yellow in comparison with other chlorosilicate phosphors such as Eu²⁺ and Mn²⁺ co-doped Ca₈Mg(SiO₄)₄Cl₂ and Ca₃SiO₄Cl₂, demonstrating a potential application in phosphor converted white LEDs.     

Thermoluminescence spectroscopy of Eu and Mn doped BaMgAl10O17

Thermoluminescence (TL) studies of Eu²⁺ and Mn²⁺ doped BaMgAl₁₀O₁₇ (BAM) are reported and discussed. The TL spectra that are measured after irradiation with ultraviolet (120-) show a series of TL peaks between 100 and . The TL spectra are similar for BAM with the two dopants, which suggest that the shallow traps are typical for the BAM host lattice. Using the Hoogstraaten analysis trap depths between 0.1 and are determined. A model is proposed based on thermally activated recombination in local TL centres (not via the conduction band). Further support for this model is obtained from the observation that the TL signal is strongest for excitation around the band edge of BAM . Upon heating the samples in air all low temperature TL peaks decrease in intensity. In addition a new peak appears in the TL spectrum, which is connected with a deeper trap and also a partial oxidation of Eu²⁺ to Eu³⁺ is observed. The luminescence efficiency is lower and the UV induced degradation is faster after annealing in air. These results indicate that the shallow traps are related to oxygen vacancies. The shallow traps do not have a negative influence on performance (efficiency and degradation) of BAM as a lighting phosphor. The luminescence efficiency and stability are strongly influenced by the formation of Eu³⁺ and a deeper trap during annealing in air. Subsequent annealing in a reducing atmosphere restores the original properties.     

Emission properties of Eu, Mn in MAl2Si2O8 (M=Sr, Ba)

The emission properties of Eu²⁺ and Mn²⁺ in monoclinic SrAl₂Si₂O₈ (M-SAS) and hexagonal BaAl₂Si₂O₈ (H-BAS), both of which have only one alkaline-earth site, were studied. The emission peaks of both Eu²⁺ (405 nm) and Mn²⁺ (564 nm) in SrAl₂Si₂O₈, are located at longer wavelengths, compared with those in H-BAS (373 nm for Eu²⁺ and 518 nm for Mn²⁺), because of the stronger crystal field strength at the Sr site. EPR spectra showed that the g values of Mn²⁺ are 4.5065 in M-SAS:Mn and 2.0247 in H-BAS:Mn. Magnetic measurements proved that Mn²⁺ was at high-spin state in both hosts. The large g value of Mn²⁺ in M-SAS was ascribed to the mixing of the first excitation state to the ground state, both of which have lower d orbital degeneracy due to the lower symmetry of Mn²⁺ site. The transfer efficiency from Eu²⁺ to Mn²⁺was about 10% in M-SAS, higher than that in H-BAS (5%). This was probably because Eu²⁺ emission overlaps the relatively low excitation level of Mn²⁺ in M-SAS. In order to obtain high transfer efficiency, it was necessary for the Eu²⁺ emission to overlap the lowest excitation level of Mn²⁺. The results obtained in this work may be helpful to design the new white or red phosphors for white-light emitting diode (w-LED) applications.     

Luminescence spectroscopy and energy transfer in Eu2+/Mn2+-doped KCaPO4 phosphors

Eu²⁺/Mn²⁺-doped KCaPO₄ phosphors were prepared by conventional solid-state reaction. X-ray powder diffraction (XRD), SEM, photoluminescence excitation, and emission spectra, and the luminescence decay curves were measured. Mn²⁺ singly doped KCaPO₄ shows the weak origin-red luminescence band peaked at about 590 nm. The Eu²⁺/Mn²⁺ co-doped phosphors emit two distinctive luminescence bands: a blue one centered at 480 nm originating from Eu²⁺ ions and a broad red-emitting one peaked at 590 nm from Mn²⁺ ions. The luminescence intensity from Mn²⁺ ions can be greatly enhanced with the co-doping of Eu²⁺ ions. The efficient energy transfer from Eu²⁺ to Mn²⁺ was verified by the photoluminescence spectra together with the luminescence decay curves. The resonance-type energy transfer via a dipole–quadrupole interaction mechanism was supported by the decay lifetimes. The emission colors could be tuned by changing the Mn²⁺-doping concentration.     

Luminescence properties and energy transfer in Eu2+, Mn2+ codoped Na(Sr,Ba)PO4 phosphor

Eu²⁺ and Mn²⁺ singly doped and codoped Na(Sr,Ba)PO₄ phosphors were synthesized, and their luminescent properties were investigated. A broad blue emission and a broad orange emission band were observed in Na(Sr,Ba)PO₄:Eu²⁺, Mn²⁺ phosphor. The resonant-type energy transfer from Eu²⁺ to Mn²⁺ was demonstrated, and the energy transfer efficiency was also calculated according to their emission spectra. Based on the principle of energy transfer, the emission intensity ration of Eu²⁺ and Mn²⁺ could be appropriately tuned by adjusting the contents of activators. Due to the strong absorption in the 250–400 nm range, Na(Sr,Ba)PO₄:Eu²⁺, Mn²⁺ phosphor could be used as a potential candidate for near-UV white light-emitting diodes (LEDs).     

Red persistent luminescent silicate nanoparticles

Red persistent luminescent diopside nanoparticles doped with Mn²⁺ and codoped with RE³⁺ (Eu²⁺, Dy³⁺) have been obtained by sol-gel method. The influence of codoping rare earth ions on the persistent luminescence was studied by wavelength-resolved thermally stimulated luminescence (TSL) measurements from 30 to 650 K after X-ray irradiation. From these first results, a mechanism of persistent luminescence is proposed. In this mechanism Mn²⁺ and Eu²⁺ act as TSL recombination centers, Mn³⁺ and Eu³⁺ being stable hole centers, whereas Dy³⁺ acts as a good electron trap giving rise to a TSL peak at high temperature. Finally, persistent luminescence was measured. Intensity and persistence of the red luminescence of CaMgSi₂O₆: Mn²⁺–Dy³⁺ are better than those of CaMgSi₂O₆: Mn²⁺ and CaMgSi₂O₆: Mn²⁺–Eu²⁺, which are in agreement with the results of TSL.     

Origin of PL intensity increase of CaMgSi2O6:Eu phosphor after baking process for PDPs application

We have synthesized blue-emitting CaMgSi₂O₆:Eu²⁺ (CMS) and evaluated its thermal stability after baking process. To evaluate its thermal stability, CMS was baked in air at 500 and 600 °C for 20 min, respectively, and compared with BaMgAl₁₀O₁₇:Eu²⁺ (BAM) treated in the same condition. After baking process, CMS showed somewhat increased photoluminescence (PL) intensity with baking temperature. To investigate the reasons behind the increase of PL intensity after baking process, vacuum ultraviolet (VUV)/PL, electron spin resonance (ESR), X-ray photoelectron spectroscopy (XPS) techniques were applied. From the ESR and the XPS analyses, it is noted that spectral intensity of Eu²⁺ ion somewhat increased. It was believed that due to charge balance Eu³⁺ ions reduced to Eu²⁺ ions during the baking process in air. It is clear that the concentration of Eu²⁺ increased after the baking process in air and it leads to slight increase of the VUV/PL intensity of CMS phosphor.     

Eu-Mn energy transfer in white-light-emitting T-phase (Ba,Ca)2SiO4:Eu, Mn phosphor

White-light-emitting T-phase Eu²⁺/Mn²⁺-codoped (Ba, Ca)₂SiO₄ phosphors are achieved in terms of the energy transfer between Eu²⁺ and Mn²⁺ ions. All spectra consist of the relatively broad green and the red emission bands, which thus result in a warm-white color with a color temperature of ∼4000 K. With increasing Eu²⁺ ions at fixed Mn²⁺ concentrations, a strong correlation between the luminescence and the electron paramagnetic resonance spectra is observed. This demonstrates that Eu²⁺ doping causes a perturbation of Mn²⁺ sites and the violation of their selection rules that enhances Mn²⁺-related emissions.