双层周期加肋有限长圆柱壳声散射精细特征研究

研究了双层周期性加肋有限长圆柱壳在水中的声散射特性. 壳体振动用薄壳理论的Donnell 方程描述,环肋振动用相互独立的薄板纯弯曲振动和平面应力状态下的振动方程描述,忽略弦间流体对环肋轴向力的作用. 数值计算给出远场收发合置情况下的周向目标强度和角度-频率谱图,并据此进行机理分析. 计算结果表明远场散射声场中除壳体弹性贡献外,弦间流体以及环肋与内外壳的相互作用对散射声场的贡献也是很重要的,并且在角度-频率谱中出现了舷间流体引起的流体附加波以及周期环肋引起的Bragg散射等回波精细特征,其中流体附加波是双层加肋圆柱壳声散射最重要的散射精细特征,是以往单层圆柱壳声散射所不具有的现象. 最后通过实验对理论推导进行了验证,实验与理论基本符合. 关键词： 声散射 圆柱壳 环肋 流体附加波     

Acoustic signature of a submarine hull under harmonic excitation

The structural and acoustic responses of a submarine under harmonic force excitation are presented. The submarine hull is modelled as a cylindrical shell with internal bulkheads and ring stiffeners. The cylindrical shell is closed by truncated conical shells, which in turn are closed at each end using circular plates. The entire structure is submerged in a heavy fluid medium. The structural responses of the submerged vessel are calculated by solving the cylindrical shell equations of motion using a wave approach and the conical shell equations with a power series solution. The far-field radiated sound pressure is then calculated by means of the Helmholtz integral. The contribution of the conical end closures on the radiated sound pressure for the lowest circumferential mode numbers is clearly observed. Results from the analytical model are compared with computational results from a fully coupled finite element/boundary element model.     

Evaluation of the vibrational modes of the human skull as it relates to bone-conducted sound

Analytic and numerical models are used to study bone-conducted sound and how it relates to the vibrational modes of the human skull. The analytic model is based on the solution to the acoustic and elastic wave equations and the constraining boundary conditions for a fluid-filled elastic sphere. Both models predict that most of the acoustic energy of bone-conducted sound exists in the form of surface wave vibrations at the interface between two acoustic media rather than in the bone or cranial chamber. These surface waves have phase speeds much slower than the bulk sound speed for bone. The analytic model, based on spherical elastic shells, predicts a phase speed of 775 m/s and the first resonance frequency at 1500 Hz while the numerical solution yields approximate phase speeds of 450 m/s and provides a visual display of the surface waves and diffraction effects.     

Acoustic radiation from shear deformable stiffened laminated cylindrical shells

An analytical model of acoustic radiation from shear deformable laminated cylindrical shells with initial axial loadings and doubly periodic rings is presented. The shear deformation and rotary inertia of the rings are taken into account and the rings interact with the cylindrical shell only through the normal forces. The far-field sound pressure is found by using the Fourier wavenumber transform and stationary phase method. High frequency limitation issues of the first-order shear deformation theory are discussed and the effects of the second set of rings, axial initial loadings and multiple external loadings on the far-field acoustic radiation are explored. Further, the helical wave spectra of the radial displacement and sound pressure are used to study the vibrational and acoustic characteristics of the laminated shells. Above the ring frequency, the profile of the helical wave spectra of the far-field sound pressure induced by the cylindrical shell is an ellipse and the patterns of the helical wave spectra of the far-field sound pressure keep unchanged. Moreover, the ellipse distinguishes the supersonic wavenumbers and subsonic wavenumbers from the helical wave spectra of the radial displacement and surface sound pressure in the wavenumber domain. The bright spots and highlights of the helical wave spectra show that the corresponding waves are dominant.     

Mathematical model for characterizing noise transmission into finite cylindrical structures

This work presents a theoretical study of the sound transmission into a finite cylinder under coupled structural and acoustic vibration. Particular attention of this study is focused on evaluating a dimensionless quantity, "noise reduction," for characterizing noise transmission into a small cylindrical enclosure. An analytical expression of the exterior sound pressure resulting from an oblique plane wave impinging upon the cylindrical shell is first presented, which is approximated from the exterior sound pressure for an infinite cylindrical structure. Next, the analytical solution of the interior sound pressure is computed using modal-interaction theory for the coupled structural acoustic system. These results are then used to derive the analytical formula for the noise reduction. Finally, the model is used to predict and characterize the sound transmission into a ChamberCore cylindrical structure, and the results are compared with experimental data. The effects of incidence angle and internal acoustic damping on the sound transmission into the cylinder are also parametrically studied.     

ELASTIC WAVE SCATTERING AND DYNAMIC STRESS CONCENTRATIONS IN CYLINDRICAL SHELLS WITH A CIRCULAR CUTOUT

In this paper, based on the theory of elastic wave motion for open cylindrical shell, wave scattering and dynamic stress concentrations in open cylindrical shells with a hole are studied by making use of small parameter perturbation methods and boundary-integral equation techniques. The boundary-integral equations and iterative imminent series of scattered waves around the cavity of the cylindrical shell are derived. By employing this method, the approximately analytical solutions of scattered waves on the edge of cutout are gained. The computational formula for getting the dynamic stress concentration factors on the contour of cavity is developed. As an example, the numerical results of these dynamic stress concentration factors are graphically presented and discussed. The analytical methods put forward in the present work have practical significances for solving the problem of elastic wave scattering and dynamic stress concentrations in cylindrical shells with a circular cutout.     

通过周期环板和附连流体的两同心圆柱壳体间的振动耦合效应

理论研究了两个同心圆柱壳体间通过周期环饭和附连流体的耦合效应。在环板内只有准纵波存在的假定下,给出环板的反作用力的表达式,并建立外壳体的声辐射解析表达式。无限长双层壳体的数值分析结果和舱段模型的实验结果一致。通过数值结果同时分析了声学流体和周期环板的载荷特征,以及它们对外壳体远场声辐射的影响。      

Sound transmission prediction by 3-D elasticity theory

The problem of sound transmission through layered panel structures is studied with the exact theory of three-dimensional (3-D) elasticity. The exact solution to the 3-D elasticity equations is obtained by the use of the Fourier spectral method. Based on this analytical solution, a transfer matrix is derived that relates the spectral displacements and stresses on the one surface of the panel to those on the opposite panel surface. The transfer matrix is then used to develop the analytical solutions for sound reflection and transmission coefficients. Explicit, concise expressions are obtained for the analytical solutions of the acoustic transmission and reflection coefficients under the general conditions of layered anisotropic panels. Examples are given for both single-layer and sandwich panels. Predictions on sound transmission from the 3-D elasticity theory are compared with available data from other methods, and the results are discussed.     

Integrable models for the dynamics of a longitudinal-transverse acoustic wave in a crystal with paramagnetic impurities

We theoretically study the evolution of longitudinal-transverse acoustic pulses propagating parallel to an external magnetic field in a system of resonant paramagnetic impurities with an effective spin S=1/2. For equal group velocities of the longitudinal and transverse waves, the pulse dynamics is shown to be described by evolution equations. In limiting cases, these equations reduce to equations integrable in terms of the inverse scattering transform method (ISTM). For the most general integrable system of equations that describes the dynamics of acoustic pulses outside the scope of the slow-envelope approximation, we derive the corresponding ISTM equations. These equations are used to find a soliton solution and a self-similar solution. The latter describes the leading edge of the packet of acoustic pulses generated when the initial unstable state of a spin system decays. Analysis of our solutions and models indicates that the presence of a longitudinal acoustic wave leads not only to a change in the amplitude and phase of the transverse wave but also to a qualitatively new dynamics of sound in such a medium.     

部分浸没圆柱壳声固耦合计算的半解析法研究

部分浸没圆柱壳-流场耦合系统的声振分析是一种典型的半空间域内声固耦合问题,其振动及声学计算目前主要依赖于数值方法求解,但无论从检验数值法还是从机理上揭示其声固耦合特性,解析或半解析方法的发展都是不可或缺的.本文提出了一种半解析方法,先将声场坐标系建立在自由液面上,采用正弦三角级数来满足自由液面上的声压释放边界条件;接着基于二维Flügge薄壳理论建立了以圆柱圆心为坐标原点的壳-液耦合系统的控制方程;然后再利用Galerkin法处理声固耦合界面的速度连续条件,推导得到声压幅值与壳体位移幅值之间的关系矩阵并求解该耦合系统的振动和水下声辐射.与有限元软件Comsol进行了耦合系统自由、受迫振动和水下辐射噪声计算结的对比分析,表明本文方法准确可靠.本文的研究为解析求解弹性结构与声场部分耦合的声振问题提供了新的思路.     

Relativistic dynamics of cylindrical shells of counter-rotating particles

Although infinite cylinders are not astrophysical entities, it is possible to learn a great deal about the basic qualitative features of generation of gravitational waves and the behavior of the matter conforming such shells in the limits of very small radius. We study an analytical model of a relativistic cylindrical shell of counter-rotating particles using kinetic theory for the matter and the junction conditions through the shell to obtain its equation of motion. The nature of the static solutions are analyzed, both for a single shell as well as for two coaxial shells. In the latter case, we integrate numerically the time dependent equation of motion of the external shell, when we neglect the wave components of the gravitational field at the shells locations. We obtain solutions that correspond to shells that perform damped oscillations, collapse, or are locally expanding. The collapse ends (numerically) when the external shell hits the interior shell. The numerically work also shows that the radiation becomes important after the bounce of the external shell.     

Acoustic resonance scattering from a multilayered cylindrical shell with imperfect bonding

The method of wave function expansion is adopted to study the three dimensional scattering of a time-harmonic plane progressive sound field obliquely incident upon a multi-layered hollow cylinder with interlaminar bonding imperfection. For the generality of solution, each layer is assumed to be cylindrically orthotropic. An approximate laminate model in the context of the modal state equations with variable coefficients along with the classical T-matrix solution technique is set up for each layer to solve for the unknown modal scattering and transmission coefficients. A linear spring model is used to describe the interlaminar adhesive bonding whose effects are incorporated into the global transfer matrix by introduction of proper interfacial transfer matrices. Following the classic acoustic resonance scattering theory (RST), the scattered field and response to surface waves are determined by constructing the partial waves and obtaining the non-resonance (backgrounds) and resonance components. The solution is first used to investigate the effect of interlayer imperfection of an air-filled and water submerged bilaminate aluminium cylindrical shell on the resonances associated with various modes of wave propagation (i.e., symmetric/asymmetric Lamb waves, fluid-borne A-type waves, Rayleigh and Whispering Gallery waves) appearing in the backscattered spectrum, according to their polarization and state of stress. An illustrative numerical example is also given for a multi-layered (five-layered) cylindrical shell for which the stiffness of the adhesive interlayers is artificially varied. The sensitivity of resonance frequencies associated with higher mode numbers to the stiffness coefficients is demonstrated to be a good measure of the bonding strength. Limiting cases are considered and fair agreements with solutions available in the literature are established.     

Study on sound transmission characteristics of a cylindrical shell using analytical and experimental models

A circular cylindrical cavity enclosed by a thin elastic shell is found in many practical devices such as expansion volume mufflers, hermetic compressors and aircraft cabins. Analytical and experimental studies are conducted in this work to understand the characteristics of sound transmission through the cylindrical wall of such a system. Using an infinitely long circular cylindrical shell subjected to a plane incident wave, an exact solution is obtained by solving the classical shell vibration equations and the acoustic wave equations simultaneously. Transmission losses obtained from the solution are compared to the transmission losses that are measured for a cylindrical shell of finite length and the same cross-sectional dimensions. The comparison suggests that the theoretical model can be used as an effective design tool despite considerable simplifications involved.     

矩形波导中宽带非对称声传输

目前已有的非对称性声传输模型大部分局限于二维模式,无法直接应用于三维实际系统,针对这一问题,文中研究了通过内置非对称几何结构来实现声单向传输的三维管道模型。该几何结构体内引入天然材料——氙气,利用氙气与空气两种天然气体折射率的差异以及结构的不对称,实现声波在管道中的非对称传输,即当声波正向入射时,可通过管道内结构到达另一侧;而当反向入射时,声波无法通过内置的非对称结构。理论计算结果和仿真结果表明声波在三维矩形波导管中的非对称声传输效果和结构的厚度相关:当结构厚度较薄时,可在较宽频带范围内实现声波的非对称传输。此外,该矩形波导设计具有结构简单、透明超轻等特点,为设计新型声波非对称传输器件提供了相应的理论参考。      

Analytical and numerical prediction of harmonic sound power in the inlet of aero-engines with emphasis on transonic rotation speeds

Tone noise radiated through the inlet of a turbofan is mainly due to rotor-stator interactions at subsonic regimes (approach flight), and to the shock waves attached to each blade at supersonic helical tip speeds (takeoff). The axial compressor of a helicopter turboshaft engine is transonic as well and can be studied like turbofans at takeoff. The objective of the paper is to predict the sound power at the inlet radiating into the free field, with a focus on transonic conditions because sound levels are much higher. Direct numerical computation of tone acoustic power is based on a RANS (Reynolds averaged Navier–Stokes) solver followed by an integration of acoustic intensity over specified inlet cross-sections, derived from Cantrell and Hart equations (valid in irrotational flows). In transonic regimes, sound power decreases along the intake because of nonlinear propagation, which must be discriminated from numerical dissipation. This is one of the reasons why an analytical approach is also suggested. It is based on three steps: (i) appraisal of the initial pressure jump of the shock waves; (ii) 2D nonlinear propagation model of Morfey and Fisher; (iii) calculation of the sound power of the 3D ducted acoustic field. In this model, all the blades are assumed to be identical such that only the blade passing frequency and its harmonics are predicted (like in the present numerical simulations). However, transfer from blade passing frequency to multiple pure tones can be evaluated in a fourth step through a statistical analysis of irregularities between blades. Interest of the analytical method is to provide a good estimate of nonlinear acoustic propagation in the upstream duct while being easy and fast to compute. The various methods are applied to two turbofan models, respectively in approach (subsonic) and takeoff (transonic) conditions, and to a Turbomeca turboshaft engine (transonic case). The analytical method in transonic appears to be quite reliable by comparison with the numerical solution and with available experimental data.     

三弹性圆柱壳体多重耦合声辐射计算方法

为研究多圆柱壳组合结构的声辐射特性,采用模态叠加法建立了3个并排无限长弹性圆柱壳的振动声散射耦合物理模型,充分考虑了三圆柱壳的表面振动与散射声场的耦合,其中散射声场可分解为各圆柱壳刚性散射声场和弹性辐射声场的叠加,数学上将各壳间的声场耦合关系通过柱函数加法公式描述。利用该物理模型,分析了多重散射对稳态声场求解结果的影响,比较了三圆柱壳耦合系统与单个圆柱壳系统的辐射声场指向性、声压级及辐射声功率级的差异及其产生机理,结果表明:结构弹性耦合声辐射不仅在低频对总声场有显著影响,在高频范围也不可忽略;另外,针对本文设定参数的组合圆柱壳,在150 Hz以上频段,两旁圆柱壳对中间圆柱壳在正横方位产生了声辐射遮蔽效应,垂直方位则体现声泄漏作用。本文建立的方法可推广到三维空间任意多壳结构的声振耦合建模。      

Vibro-acoustic behaviors of an elastically restrained double-panel structure with an acoustic cavity of arbitrary boundary impedance

An analytical study on the vibro-acoustic behaviors of a double-panel structure with an acoustic cavity is presented. Unlike the existing studies, a structural–acoustic coupling model of an elastically restrained double-panel structure with an acoustic cavity having arbitrary impedance on sidewalls around the cavity is developed in which the two dimensional (2D) and three dimensional (3D) modified Fourier series are used to represent the displacement of the panels and the sound pressure inside the cavity, respectively. The unknown expansions coefficients are treated as the generalized coordinates and the Rayleigh–Ritz method is employed to determine displacement and sound pressure solutions based on the energy expressions for the coupled structural–acoustic system. The effectiveness and accuracy of the present model is validated by numerical example and comparison with finite element method (FEM) and existing analytical method, with good agreement achieved. The influence of key parameters on the vibro-acoustic behaviors and sound transmission of the double-panel structure is investigated, including: cavity thickness, boundary conditions, sidewall impedance, and the acoustic medium in the cavity.     

Analytical prediction of break-out noise from a reactive rectangular plenum with four flexible walls

This paper describes an analytical calculation of break-out noise from a rectangular plenum with four flexible walls by incorporating three-dimensional effects along with the acoustical and structural wave coupling phenomena. The breakout noise from rectangular plenums is important and the coupling between acoustic waves within the plenum and structural waves in the flexible plenum walls plays a critical role in prediction of the transverse transmission loss. The first step in breakout noise prediction is to calculate the inside plenum pressure field and the normal flexible plenum wall vibration by using an impedance-mobility approach, which results in a compact matrix formulation. In the impedance-mobility compact matrix (IMCM) approach, it is presumed that the coupled response can be described in terms of finite sets of the uncoupled acoustic subsystem and the structural subsystem. The flexible walls of the plenum are modeled as an unfolded plate to calculate natural frequencies and mode shapes of the uncoupled structural subsystem. The second step is to calculate the radiated sound power from the flexible walls using Kirchhoff-Helmholtz (KH) integral formulation. Analytical results are validated with finite element and boundary element (FEM-BEM) numerical models.     

Elastic response of an acoustic coating on a rib-stiffened plate

This paper develops a three-dimensional analytical model of a fluid-loaded acoustic coating affixed to a rib-stiffened plate. The system is loaded by a plane wave that is harmonic both spatially and temporally. The model begins with Navier-Cauchy equations of motion for an elastic solid, which produces displacement fields that have unknown wave propagation coefficients. These are inserted into stress equations at the boundaries of the plate and the acoustic coating. These stress fields are coupled to the fluid field and the rib stiffeners with force balances. Manipulation of these equations develops an infinite number of indexed equations that are truncated and incorporated into a global matrix equation. This global matrix equation can be solved to determine the wave propagation coefficients. This produces analytical solutions to the systems’ displacements, stresses, and scattered pressure field. This model, unlike previously developed analytical models, has elastic behavior and thus incorporates higher order wave motion that makes it accurate at higher wavenumbers and frequencies. An example problem is investigated for three specific model results: (1) the dynamic response, (2) a sonar array embedded in the acoustic coating, and (3) the scattered pressure field. An expression for the high frequency limitation of the model is derived. It is shown that the ribs can have a significant impact on the structural acoustic response of the system.     

Surface response of a viscoelastic medium to subsurface acoustic sources with application to medical diagnosis

The response at the surface of an isotropic viscoelastic medium to buried fundamental acoustic sources is studied theoretically, computationally and experimentally. Finite and infinitesimal monopole and dipole sources within the low audible frequency range (40-400 Hz) are considered. Analytical and numerical integral solutions that account for compression, shear and surface wave response to the buried sources are formulated and compared with numerical finite element simulations and experimental studies on finite dimension phantom models. It is found that at low audible frequencies, compression and shear wave propagation from point sources can both be significant, with shear wave effects becoming less significant as frequency increases. Additionally, it is shown that simple closed-form analytical approximations based on an infinite medium model agree well with numerically obtained "exact" half-space solutions for the frequency range and material of interest in this study. The focus here is on developing a better understanding of how biological soft tissue affects the transmission of vibro-acoustic energy from biological acoustic sources below the skin surface, whose typical spectral content is in the low audible frequency range. Examples include sound radiated from pulmonary, gastro-intestinal and cardiovascular system functions, such as breath sounds, bowel sounds and vascular bruits, respectively.