周期性加隔板有限长圆柱壳声散射

研究内部真空周期性加隔板圆柱壳在水中的声散射特性.壳体振动用薄壳理论的Donnell方程描述,隔板振动用相互独立的薄板纯弯曲振动和平面应力状态下的振动方程描述.考虑轴向、切向、径向三个方向的力和弯矩共同作用导出了散射声场的解析表达式.数值计算给出远场收发合置情况下的角度-频率谱图,并据此进行机理分析.通过与内部周期性加环肋圆柱壳声散射的角度-频率谱图比较发现,除周期加肋产生的Bragg散射波与弯曲Bloch-Floquet波外,加隔板的情况还存在明显的隔板共振亮线,并且发生隔板共振与壳体弹性波、Bragg散射波、弯曲Bloch-Floquet波耦合的现象.通过实验对理论进行了验证,在实验的频率范围内,Bragg散射亮线与理论符合得很好,部分Bloch-Floquet波散射亮线和隔板共振散射亮线也与理论符合.     

外部加环肋有限长圆柱壳体声散射

为了深入理解双层加肋圆柱壳体的声散射机理,专门研究了两层壳体之间环肋的声散射。仅考虑模型的刚性散射,采用Kirchhoff近似推导了单个环肋的反向散射声场的解析解,并推广到等间距的环肋散射,结合圆柱壳刚性散射得到外部加周期性环肋的圆柱壳体的散射声场近似解。同时,利用图形声学方法(GRACO)对模型的目标强度进行数值计算。理论与实验的结果表明,刚性散射在反向散射声场中起主要作用,周期性环肋引起的Bragg散射对散射声场有重要贡献,同时遮挡效应在实际情况下有较大作用。      

水中双层无限长圆柱壳体声散射

研究水下双层无限长圆柱壳体的声散射。采用弹性薄壳理论和Fourier变换方法导出了散射声场的解析解。并分别计算了平面波正横和斜入射单层和双层无限长圆柱壳体的远场散射形态函数。计算表明在不同的入射角,由于不同类型的弹性波被激励,散射波呈现不同的特性。通常双层无限长圆柱壳体的散射特性由外壳、内壳和中间耦合水层共同作用决定。但外壳很薄、内壳较厚、水层较薄时,无限长充水双层圆柱壳体的低频散射特性主要由单层内壳决定。当然这时外壳的共振特性也不能忽略。     

降低加肋双层圆柱壳辐射噪声线谱的结构声学设计

为降低双层圆柱壳辐射噪声线谱,从控制内壳振动响应和衰减壳间振动传递率进行结构声学设计。采用机械阻抗理论分析了环肋圆柱壳模态响应控制机理;由环肋振动方程推导分析了环肋径向机械阻抗特性;基于阻抗失配、波形转换原理提出一种阻抗加强环肋,分析了振动波阻抑特性;利用阻尼减振技术,综合考虑肋板的刚度、阻尼特性,设计了金属橡胶层叠肋板;结合数值计算实例,分析了设计双层壳模型的声辐射性能。结果表明:设计的双层加肋圆柱壳结构能有效降低辐射噪声线谱,在分析频段内辐射声压线谱平均降低约6.6 dB。研究结果对研制低噪声水下航行器具有良好的工程价值和应用前景。      

充水圆柱壳声散射的环绕波分析

研究了内部充水圆柱壳散射声场的构成。采用弹性薄壳理论和Sommerfeld-Watson变换(SWT)方法导出散射声场的解析解。数值搜索环绕波的复波数极点,比较圆柱壳体内部真空和内部充水两种情况下表面环绕波的相速度、衰减等性质。用镜反射波和环绕波的叠加合成反向散射形态函数,与简正级数解符合良好。计算流体附加环绕波的回波时序并与实验数据对照。结果表明,流体附加环绕波的再辐射是内部充水圆柱壳的形态函数出现更加丰富的共振峰和回波结构形成的重要原因。      

充水有限长圆柱薄壳声散射:Ⅰ.理论

研究水中充水有限长圆柱薄壳的声散射。采用弹性薄壳理论结合边界条件导出了有限长圆柱薄壳倾斜入射时散射声场的解析解,内部充水的作用反映在系统总阻抗中增加了内部流体阻抗。数值计算表明,在反向散射声场中,刚性散射部分仅在正横附近有比较大的贡献,而斜入射时起主要作用的是弹性散射部分。散射波相速度频散曲线的计算表明,与内部真空的情况相比内部充水后除正横附近的纵波和剪切波以外,增加了一组内部流体引起的附加波,其对散射声场贡献非常重要。在计算的频率-角度谱图中,内部流体附加波呈现"碗"形共振曲线。      

水下三弹性柱壳耦合声散射特性研究

为研究3个并排无限长弹性圆柱壳受垂直于柱轴方向的平面声波作用的声散射特性,采用Fourier级数展开法建立了圆柱壳声散射数学物理模型,考虑了三圆柱壳弹性振动声辐射和刚性声散射,建立了3个壳体辐射声场和刚性散射声场的耦合作用关系,比对了等效散射强度的刚性散射分量与弹性散射分量,并分析了三壳体等效散射强度特性。计算结果表明:当ka₂>40,在频率f=3000 Hz以上频段,弹性分量对等效散射强度变化趋势的贡献可以忽略。当ka₂>30,在频率f=2400 Hz以上频段,弹性散射分量对等效散射强度影响不超过3 dB;三壳与单壳的等效散射强度在0°入射角方位相当,其它方位三壳体等效散射强度明显大于单壳体。本文的理论公式可推广到任意数量阻抗柱的声透射和声反射问题。      

复杂双层壳体声辐射性能分析

研究了加肋的环板双层壳体的振动和声辐射性能,采用经典Flugge微分算子描述壳体的运动,通过将加强构件等效为反力和反力矩加在内外壳体的表面上而引入壳体振动方程,并利用Helmholtz波动方程和壳体表面的位移连续条件来解位于内层壳和外层壳之间的环形流场,最终建立和求解了双壳体声-流体-结构耦合方程,详细讨论了双壳体参数和双壳间连接型式的变化对其声辐射性能的影响。得出了以下结论:双层壳体内外壳间距减小,内外壳的耦合作用就越强,壳体辐射声功率和表面振动均方速度级升高,外壳的“屏蔽”作用就越不明显;内外壳厚度的改变对壳体振动速度级有较大的作用,对声辐射的影响不是很明显,厚度越大,振动速度级就越低。     

内部体积源作用下的圆柱壳内外声场特性

圆柱壳内各型体积源辐射噪声特性研究是声场建模和声场预报的前提.为了研究具有指向性的大尺度体积源特性对水下航行器结构内外声场的影响,本文结合薄壳理论、等效源和柱腔Green函数构造了体积源激励下的壳体振动耦合方程,研究了体积源表面声散射作用和指向性强弱对圆柱壳内外声场的影响.数值计算结果表明,体积源构造的准确性与其等效源位置有关,等效源配置在体积源几何中心与其结构表面之间0.4—0.6时,可以提高声场计算结果的准确性;大尺度体积源表面的声散射作用会导致壳体内部声场结构发生改变,内声场声腔共振峰发生偏移,并且在部分频段引起较强的声透射现象;此外,体积源指向性变化对壳体内外声场强弱影响较小,其显著作用表现在改变了外辐射声场的远场指向性.该研究结果对噪声预报和控制有一定的参考价值.     

水下双层加肋圆柱壳全空间收发分置散射声场快速预报方法

针对水下双层加肋圆柱壳的全空间收发分置散射声场求解,提出了一种快速预报方法。该方法将散射声场表示为声散射传递函数与声源密度函数的乘积,以目标表面网格信息、少量的仿真或测试多基地散射声压数据作为已知信息,借助数值积分、矩阵理论、最小二乘法对其他收发分置散射声场进行预报。分别以有限元仿真和试验测试的散射声压数据作为输入,对水下双层加肋圆柱壳的多基地散射声场进行了计算,并与完全采用有限元方法的计算结果进行了对比。结果表明:该方法在目标表面结构和部分散射声场数据已知条件下能对目标的全空间收发分置散射声场进行预报;已知散射声压数据量越多,计算频率越低,预报精度越高。     

ELASTIC WAVE SCATTERING AND DYNAMIC STRESS CONCENTRATIONS IN CYLINDRICAL SHELLS WITH A CIRCULAR CUTOUT

In this paper, based on the theory of elastic wave motion for open cylindrical shell, wave scattering and dynamic stress concentrations in open cylindrical shells with a hole are studied by making use of small parameter perturbation methods and boundary-integral equation techniques. The boundary-integral equations and iterative imminent series of scattered waves around the cavity of the cylindrical shell are derived. By employing this method, the approximately analytical solutions of scattered waves on the edge of cutout are gained. The computational formula for getting the dynamic stress concentration factors on the contour of cavity is developed. As an example, the numerical results of these dynamic stress concentration factors are graphically presented and discussed. The analytical methods put forward in the present work have practical significances for solving the problem of elastic wave scattering and dynamic stress concentrations in cylindrical shells with a circular cutout.     

Acoustic wave scattering from a composed shell reinforced by a single rib: characteristics of peripheral waves

The steady-state axisymmetrical problem of a plane acoustic wave scattering from a composed shell is considered. The shell has a cylindrical part and two hemispherical endcaps. The rib is a ring of rectangular cross-section that divides the shell into two equal parts. The motion of the shell and the rib is described by the equations of elasticity theory, and the liquid is described by the Helmholtz equation. The solution is obtained numerically by a coupled finite element/boundary element model. Two peripheral waves are generated in the shell: the membrane S0 wave and the bending type water-borne A wave. The form function, acoustic spectrogram and dispersion curves of the phase velocities are presented, and the effect of the rib on the peripheral waves is discussed.     

准周期加隔板有限长圆柱壳声散射

研究准周期加隔板有限长圆柱壳在水中的声散射特性,隔板位置存在小的随机偏差.首先给出理论推导,通过计算周期加隔板情况验证理论公式的正确性.然后以角度-频率谱形式给出准周期加隔板圆柱壳声散射计算结果.计算表明隔板的准周期性导致Bloch-Floquet弯曲波和散射声场背景出现扩散和增强现象,而近乎平行于横轴的由隔板共振引起的亮条纹被散射声场背景所掩盖.最后讨论了随机因子、隔板个数以及隔板间距对Bragg散射的影响.计算表明随机因子越大Bragg散射条纹的频率范围越宽扩散越明显,隔板个数越多Bragg散射条纹的频率范围越窄能量越集中,隔板间距变大时Bragg散射条纹增多而且越高阶次的Bragg散射条纹扩散越严重.根据Bragg散射的几何特征导出的近似估算公式可以较准确预报Bragg散射在频谱图上的位置,也可以大致预报隔板准周期排列时Bragg散射的扩散现象.     

Acoustic scattering characteristics of a thick-walled orthotropic cylindrical shell at oblique incidence

The method of wave function expansion is adopted to study the scattering of a plane harmonic acoustic wave incident at an arbitrary angle upon an arbitrarily thick cylindrically orthotropic homogeneous cylindrical shell submerged in and filled with compressible ideal fluids. A laminate approximate model and the so-called state space formulation in conjunction with the classical transfer matrix (T-matrix) approach are employed to present an analytical solution based on the three-dimensional exact equations of anisotropic elasticity. The solution is used to correlate the perturbation in the material elastic constants of an air-filled and water-submerged aluminium cylindrical shell to the sensitivity of resonances associated with various modes of wave propagation appearing in the backscattered amplitude spectrum (i.e., axially guided, Lamb, Rayleigh and Whispering Gallery waves). The effects of shell wall thickness as well as inner fluid loading on the frequency response of the shell are also examined. A limiting case is considered and good agreement with the solution available in the literature is obtained.     

Free vibrational characteristics of isotropic coupled cylindrical-conical shells

This paper presents the free vibrational characteristics of isotropic coupled conical-cylindrical shells. The equations of motion for the cylindrical and conical shells are solved using two different methods. A wave solution is used to describe the displacements of the cylindrical shell, while the displacements of the conical sections are solved using a power series solution. Both Donnell-Mushtari and Flügge equations of motion are used and the limitations associated with each thin shell theory are discussed. Natural frequencies are presented for different boundary conditions. The effect of the boundary conditions and the influence of the semi-vertex cone angle are described. The results from the theoretical model presented here are compared with those obtained by previous researchers and from a finite element model.     

Helical waves of an elastic cylindrical shell

Properties of helical waves of a cylindrical shell described by Kirchhoff-Love equations are considered. The problem is reduced to the case of the propagation of plane waves in an equivalent plate. On the basis of the corresponding dispersion equation and its solution, a conclusion is made about the anisotropy of the shell properties. Dispersion curves are plotted for different angles of propagation of helical waves with respect to the shell axis. Displacements of the shell along and across the direction of wave propagation are calculated.     

Rotationally symmetric vibrations of orthotropic layered cylindrical shells

The derivation of the general equations of motion for the analysis of laminated cylindrical shells consisting of layers of orthotropic laminae, and the equations of motion for rotationally symmetric deformation made previously by the authors are used in this study. The three coupled differential equations governing the rotationally symmetric motion of each layer of a cylindrical shell with rotary inertia neglected are replaced by another set of three differential equations where the solutions can be obtained systematically. General solutions for laminated cylindrical shells of finite length are presented. Coupled frequencies and several mode shapes for a fixed-end cylindrical shell with one and two orthotropic layers of various geometric dimensions are calculated for illustrative purposes. The results based on the present analysis for a single layered shell are compared to the results obtained according to the classical analysis.     

STRUCTURAL RESPONSE OF LAMINATED COMPOSITE SHELLS SUBJECTED TO BLAST LOADING: COMPARISON OF EXPERIMENTAL AND THEORETICAL METHODS

The results from a theoretical and experimental investigation of the dynamic response of cylindrically curved laminated composite shells subjected to normal blast loading are presented. The dynamic equations of motion for cylindrical laminated shells are derived using the assumptions of Love's theory of thin elastic shells. Kinematically admissible displacement functions are chosen to represent the motion of the clamped cylindrical shell and the governing equations are obtained in the time domain using the Galerkin method. The time-dependent equations of the cylindrically curved laminated shell are then solved by the Runge-Kutta-Verner method. Finite element modelling and analysis for the blast-loaded cylindrical shell are also presented. Experimental results for cylindrically curved laminated composite shells with clamped edges and subjected to blast loading are presented. The blast pressure and strain measurements are performed on the shell panels. The strain response frequencies of the clamped cylindrical shells subjected to blast load are obtained using the fast Fourier transformation technique. In addition, the effects of material properties on the dynamic behaviour are examined. The strain-time history curves show agreement between the experimental and analysis results in the longitudinal direction of the cylindrical panels. However, there is a discrepancy between the experimental and analysis results in the circumferential direction of the cylindrical panels. A good prediction is obtained for the response frequency of the cylindrical shell panels.