偏置信号调制下色关联噪声驱动的单模激光的光强相对涨落

采用线性化近似，计算了由具有色关联的受偏置信号调制的色泵噪声和色量子噪声驱动 的单模激光增益模型的光强相对涨落，发现相对涨落随噪声强度的变化曲线中存在极小值，分析了偏置信号的强度、周期信号频率、噪声间的互关联强度和互关联时间对曲线的影响； 对单模激光增益模型在偏置信号调制和直接信号调制两种方式下的输出光强相对涨落进行了比较，发现光强涨落与偏置信号的强度密切相关. 关键词： 偏置信号调制 光强相对涨落 线性化近似     

统一展开理论在激光系统中的应用

在统一展开理论的框架内，通过提高推导过程中的精度，得到了更精确的结果，且将其推广应用到激光系统中。具体研究两个激光模型，得到了它们的光强定态几率分布、光强平均值及相相对涨落，通过比较发现，本文所得到的结果明显的改善了用统一色噪声的似所得到的结果而与精确的数值结果和数值模拟结果符合更好。     

双模环型激光增益噪声模型的非线性效应

讨论了一个双模环型激光增益噪声模型，其中考虑了完全饱和效应且乘法噪声由增益系数涨落引起。在共振及两模具有相同泵参数时，获得了光强联合定态分布的精确解析表达式。通过与现有的双模激光摸型（其中乘法噪声由损失系数涨落引起）的比较，发现乘法噪声系数的非线性效应减弱了乘法噪声给激光光强统计性质带来的反常特性，并且这种减弱随着乘法噪声增强或损失系数减小而愈加明显。     

色噪声驱动下调幅波的单模激光随机共振

对单模激光增益模型的光强方程加入调幅波，用线性化近似方法计算了以e指数形式关联的两色噪声驱动下光强的输出功率谱及信噪比. 结果表明噪声间互关联时间及互关联程度对随机共振影响很大，信噪比随着载波信号频率ω和调制信号频率Ω的变化也和白噪声的变化曲线有很大不同. 关键词： 色噪声 单模激光 随机共振 调幅波     

实虚部关联的量子噪声和泵噪声对单模激光动力学性质的影响

采用具有实虚部关联的量子噪声和泵噪声驱动的单模激光损失模型，用线性化近似方法研究了反映激光动力学性质的光强关联函数，讨论了光强关联函数随时间的演化；并对线性化近似方法的适用范围进行了详细分析，分别讨论了量子噪声强度、泵噪声强度、量子噪声实虚部关联系数对光强相对涨落的影响，得出在小噪声、远离阈值时，线性化近似方法适用范围扩大；小噪声、远离阈值且当量子噪声实虚部无关联时，线性化近似方法适用范围最大的结论. 关键词： 单模激光 光强关联函数 光强相对涨落     

单模激光系统线性化近似适用范围的分析

采用线性化近似方法计算了具有实虚部关联的量子噪声和泵噪声驱动的单模激光损失模型的光强相对涨落,为了对线性化近似的适用范围进行详细的分析,分别讨论了量子噪声强度、泵噪声强度、量子噪声实虚部间关联系数对光强相对涨落的影响,得出在小噪声、远离阈值时,线性化近似适用范围扩大;小噪声、远离阈值且当量子噪声实虚部无关联时,线性化近似适用范围极大的结论.     

单模激光系统输入信号后的稳态平均光强相对涨落

研究了具有实虚部间关联的量子噪声和抽运噪声驱动的单模激光系统输入信号后的统计性质,采用线性化近似方法计算了系统的稳态平均光强相对涨落,分析了量子噪声实虚部间关联系数、量子噪声强度、抽运噪声强度、输入信号振幅和频率、净增益等对稳态平均光强相对涨落的影响,发现在量子噪声实虚部间弱关联、小噪声、远离阚值、信号振幅不大和频率较高的条件下激光场的统计涨落较小。     

色关联噪声驱动下双模激光随机共振

运用线性近似方法,计算得到了关联色噪声和输入周期信号作用下双模激光增益模型输出信号光强的功率密度谱和信噪比,讨论了信噪比随系统参数的变化关系.研究结果发现:在系统的参数和输入信号的频率满足一定条件时,信噪比不仅随噪声强度变化出现了传统的随机共振现象,还发现其随自饱和系数c2、输入信号频率°及交叉耦合参数b的变化都出现了随机共振.     

激光输出不稳定性对激光与物质热作用的影响

研究了激光与物质相互作用中激光输出不稳定性对材料中温度场颁的影响以及减少这种影响的途径。首次在激光热传导方程中引入噪声项,推导了噪声影响下该激光热传导方程的解。研究发现,温度场的分布受噪声的影响,材料表面温度的涨落较大,而材料的深处涨落较小;温度场的涨落还和激光加热的过程有关,随激光加热时间的增长,温度场的涨落增大。此外,材料的热传导系数、热扩散率和发射率均对温度场的涨落有影响。文中还提出了减小激     

染料激光色立方模型的第一通过时间分布

本文首先把Ｊｕｎｇ和Ｈａｎｇｇｉ提出的统一色噪声近似推广到多维情形，从而导出了这一近似下单模染料激光色立方模型的朗之万方程和福克－普朗克方程；得到了该模型第一通过时间分布的平均值，协方差和偏斜率的近似解析式并将其和数值模拟进行比较。     

Colored Noise in First-order-like Phase Transition of a Laser System

The decoupling theory is employed to analyze the multiplicative colored noise in a single mode laser system. Steady state intensity distribution function is derived when colored noise is included in the laser system. The first-order-like phase transition driven by multiplicative colored noise is investigated and compared with the case of multiplicative white noise. It is shown that the noise correlation time can affect the parameter plane of the first-order-like phase transition. The steady state intensity distributions in a laser system is changed greatly with noise correlation time τ.     

Colored Noise in First-order-like Phase Transition of a Laser System

The decoupling theory is employed to analyze the multiplicative colored noise in a single mode laser system. Steady state intensity distribution function is derived when colored noise is included in the laser system. The first-order-like phase transition driven by multiplicative colored noise is investigated and compared with the case of multiplicative white noise. It is shown that the noise correlation time can affect the parameter plane of the first-order-like phase transition. The steady state intensity distributions in a laser system is changed greatly with noise correlation time τ.     

First-Order-Like Phase Transition Induced by Two Different Kinds of Noise in Dispersive Optical Bistability

With unified colored noise approximation, the steady state distribution function in dispersive optical bistability including both intensity and phase fluctuations is obtained. The parameter plane of the first-order-like phase transition is a/so derived with numerical method. It is found that the number of extremes at non-zero values of the output field in the steady state distribution function is changed from zero, two to four. It is shown that the strengths of the intensity fluctuation and the phase fluctuation have great effect on the first-order-fike phase transition.     

色关联的色噪声驱动的分段非线性模型的平均首次穿越时间

研究了色关联的乘性高斯色噪声和加性高斯色噪声驱动的分段非线性系统中, 噪声强度和相关时间对平均首次穿越时间的影响. 利用一致有色噪声近似方法和最速下降方法, 推导出系统平均首次穿越时间的表达式. 研究结果表明: 系统的平均首次穿越时间随着乘性噪声的增加会出现单峰结构, 即“共振”现象, 峰值会随着加性噪声强度和噪声之间关联强度的增加而减小. 而平均首次穿越时间作为加性噪声的函数呈单调曲线, 说明乘性噪声和加性噪声对平均首次穿越时间的影响不同. 此外, 乘性和加性噪声关联时间以及互关联时间在正关联时和负关联时 对系统平均首次穿越时间的影响是不同的. 关键词： 色噪声 分段非线性系统 平均首次穿越时间     

Fluctuations of Single-Mode Laser Driven by Two Different Kinds of Colored Noise

A single-mode laser with coupling between additive and multiplicative noise terms is investigated when the multiplicative noise and the coupling between two noise terms are colored fluctuations with finite correlation times T1 and τ2. Combining the unified colored noise approximation (UCNA) and the functional analysis, the stationary probability distribution (SPD) and the variance of the laser intensity is derived. It is found that the colored nature of multiplicative noise and the coupling strength between two noise terms can affect both the structure and the height of the SPD, while the colored nature of the coupling between two noise terms can only affect the height of the SPD. The multiplicative noise can enhance the intensity fluctuations while the additive noise can reduce the fluctuations in a laser system. Numerical simulations are presented and consistent to the analytical results.     

First-Order-Like Phase Transition Induced by Two Different Kinds of Noise in Dispersive Optical Bistability

With unified colored noise approximation, the steady state distribution function in dispersive opticalbistability including both intensity and phase fluctuations is obtained. The parameter plane of the first-order-like phasetransition is also derived with numerical method. It is found that the number of extremes at non-zero values of theoutput field in the steady state distribution function is changed from zero, two to four. It is shown that the strengths of the intensity fluctuation and the phase fluctuation have great effect on the first-order-like phase transition.     

Influence of Signal and Noise on Statistical Fluctuation of Single-Mode Laser System

On the basis of calculating the steady-state mean normalized intensity fluctuation of a signal-mode laser system driven by both colored pump noise with signal modulation and the quantum noise with cross-correlation between its real and imaginary parts, we analyze the influence of modulation signal, noise, and its correlation form on the statistical fluctuation of the laser system. We have found that when the amplitude of modulation signal weakens and its frequency quickens, the statistical fluctuation will reduce rapidly. The statistical fluctuation of the laser system can be restrained by reducing the intensity of pump noise and quantum noise. Moreover, with prolonging of colored cross-correlation time, the statistical fluctuation of laser system experiences a repeated changing process, that is, from decreasing to augmenting,then to decreasing, and finally to augmenting again. With the decreasing of the value of cross-correlation coefficient, the statistical fluctuation will decrease too. When the cross-correlation form between the real part and imaginary part of quantum noise is zero correlation, the statistical fluctuation of laser system has a minimum. Compared with the influence of intensity of pump noise, the influence of intensity of quantum noise on the statistical fluctuation is smaller.     

Influence of Signal and Noise on Statistical Fluctuation of Single-Mode Laser System

On the basis of calculating the steady-state mean normalized intensity fluctuation of a signal-mode laser system driven by both colored pump noise with signal modulation and the quantum noise with cross-correlation between its real and imaginary parts, we analyze the influence of modulation signal, noise, and its correlation form on the statistical fluctuation of the laser system. We have found that when the amplitude of modulation signal weakens and its frequency quickens, the statistical fluctuation will reduce rapidly. The by reducing the intensity of pump noise and quantum noise. statistical fluctuation of the laser system can be restrained Moreover, with prolonging of colored cross-correlation time, the statistical fluctuation of laser system experiences a repeated changing process, that is, from decreasing to augmenting, then to decreasing, and finally to augmenting again. With the decreasing of the value of cross-correlation coe~cient, the statistical fluctuation will decrease too. When the cross-correlation form between the real part and imaginary part of quantum noise is zero correlation, the statistical fluctuation of laser system has a minimum. Compared with the influence of intensity of pump noise, the influence of intensity of quantum noise on the statistical fluctuation is smaller.     

Nano-friction phenomenon of Frenkel—Kontorova model under Gaussian colored noise

The nano-friction phenomenon in a one-dimensional Frenkel-Kontorova (FK) model under Gaussian colored noise is investigated by using the molecular dynamic simulation method. The role of colored noise is analyzed through the inclusion of a stochastic force via a Langevin molecular dynamics method. Via the stochastic Runge-Kutta algorithm, the relationship between different parameter values of the Gaussian colored noise (the noise intensity and the correlation time) and the nano-friction phenomena such as hysteresis, the maximum static friction force is separately studied here. Similar results are obtained from the two geometrically opposed ideal cases: incommensurate and commensurate interfaces. It was found that the noise strongly influences the hysteresis and maximum static friction force and with an appropriate external driving force, the introduction of noise can accelerate the motion of the system, making the atoms escape from the substrate potential well more easily. Interestingly, suitable correlation time and noise intensity give rise to super-lubricity. It is noteworthy that the difference between the two circumstances lies in the fact that the effect of the noise is much stronger on triggering the motion of the FK model for the commensurate interface than that for the incommensurate interface.     

色关联乘性和加性色噪声驱动的多稳态系统的稳态特性

研究了色关联乘性和加性色噪声作用下的三稳态系统的稳态问题.首先利用一致有色噪声近似方法,推导出稳态概率密度函数的表达式,然后分析了乘性噪声和加性噪声的强度以及关联性对稳态概率密度函数的影响,研究结果表明:加性噪声强度、加性噪声和乘性噪声的关联强度和关联时间可以诱导系统的非平衡相变.